Used Forestry Ahwi for sale (132)

Condition: used, High-capacity funicular mounted on a MAN 6x4 chassis truck - Maximum working length, line of 2,000 m - MAN 400 CP truck chassis - 12 m tower equipped with 6 hydraulic anchors - Possibility of mounting the funicular in the lower position (valley) or in the upper position (mountain), in other words, the funicular can pull logs from top to bottom or from bottom to top - Trolleys with 50 m cable reserve (for easy manipulation), verbally activated with remote control station + 2 additional Trolleys - Various spare parts - The machine is registered in Romania and can be driven on public roads - Good working condition. It was used very little. Purchased from the Austrian Forestry Directorate. Installation in very good working condition. Belwo you can find our offer for VOLVO L180E. Nwsdpot Nf Ipefx Aqvog For this machine, no professional description is needed, as you can see all the details in the attached photos.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 10,000 mm, total length: 9,000 mm, total height: 4,500 mm, Equipment: roof tent, NEW EQUIPMENT Our various sizes—please let us know which one you require: 6m Wide → 6.1m x 6.1m x 3.66m → from €2,599 → 6.1m x 9.15m x 3.66m → from €2,999 → 6.1m x 12m x 3.66m → from €4,499 → 6.1m x 18m x 3.66m → from €4,520 9m Wide (arch spacing 1m or 2m) → 9.15m x 10m x 4.5m → from €3,600 → 9.15m x 12m x 4.5m → from €4,149 → 9.15m x 16m x 4.5m → from €4,999 → 9.15m x 20m x 4.5m → from €6,799 → 9.15m x 26m x 4.5m → from €8,399 12m Wide (arch spacing 1.5m or 3m) → 12.2m x 12m x 6.1m → from €12,399 → 12.2m x 21m x 6.1m → from €17,999 15m Wide (arch spacing 1.5m or 3m) → 15.25m x 12m x 6.1m → from €14,899 → 15.25m x 21m x 6.1m → from €22,199 plus delivery costs ☆ FINANCING OR LEASING POSSIBLE from €69.89/month ☆ CERTIFIED PRODUCTS ☆ TRANSPARENT OFFER ☆ INCLUDES GERMAN STRUCTURAL ANALYSIS ☆ INSTALLATION AVAILABLE ☆ INSURANCE AGAINST FIRE OR STORM AVAILABLE ☑️ Genuine 750 g/m² PVC tarpaulin—more durable than standard products Nwjdpfjudwfnox Aqvsg ☑️ Extra robust and tear-resistant thanks to fabric reinforcement ☑️ High UV resistance ☑️ 100% waterproof ☑️ Extra sturdy, galvanized tubing for maximum stability ☑️ Suitable for year-round use ☑️ German customer service and advice during purchase and assembly ☑️ Snow load: up to 130kg/m² (1m arch spacing) and 70kg/m² (2m arch spacing) ☑️ Wind load: up to wind zone 4 (1m arch spacing) and up to wind zone 2 (2m arch spacing) ☑️ Includes ground pegs and concrete anchors as well as all other small parts ☑️ Spare parts guaranteed ☑️ 5-year warranty on correctly installed PVC tarpaulin ☑️ 10-year warranty against steel frame corrosion ► Almost all models available for immediate delivery ► Colours: green or white ► Includes German structural analysis ► Doors on both gable ends ☏ Call us! We will gladly provide a non-binding quotation with best price guarantee. THE IDEAL ALTERNATIVE TO PERMANENT BUILDINGS Optimal protection from wind, sun, rain, hail, and snow! ☑️ Usually permit-free (unlike wooden, steel, or sheet metal halls) ☑️ No foundation required ☑️ High degree of stability and safety (verified by German engineering office) ☑️ Decades of use: high quality, guarantees, and spare parts supply ☑️ Robust, corrosion-free frame ☑️ Various shapes, colours, and sizes VERSATILE APPLICATION OPTIONS ☑️ For agriculture, forestry, industry, commercial, and private use ☑️ Storage for goods, materials, or machinery ☑️ Garage / carport for trucks, motorhomes, or boats/yachts ☑️ Workshop in lightweight hall ☑️ Canopy for construction sites ☑️ Shelter or shed for livestock ☑️ Barn for straw, hay, and wood ☑️ Greenhouse for plants ! Prices incl. structural analysis ! Delivery and installation available *Images similar • Prices & colours may vary • Price subject to change • For exact pricing, please request a non-binding offer • Available while stocks last • Offer non-binding

Condition: new, Brugger FMP 225 Forestry Mulcher – New, 225 cm Working Width, Ideal for Heavy-Duty Mulching! The Brugger FMP 225 is a robust forestry mulcher designed for use in agriculture, forestry, and on fallow land. Featuring a dual belt drive, 36 carbide-tipped blades, and hydraulic equipment, it is perfect for tractors from 110 HP upwards – reliable, high-performance, and ready for tough jobs. Technical Data – Brugger FMP225: Working width: 225 cm Drive: Dual belt drive (5 + 5 V-belts) PTO speed: 1000 rpm Required power: 110 – 160 HP Nsdpfx Aowhyzwsqvjwg Weight: approx. 1,800 kg Hitch: Three-point linkage CAT II / III Italian CMR gearbox Rotor shaft Ø: 219 mm (465 mm with blades) Blades: 36 pieces, carbide-tipped Working depth: –70 mm / –30 mm / +10 mm (3-position adjustable) Housing: 8 mm wall thickness, 12 mm side panels Hydraulic connections: 2x double-acting (1x for rear flap, 1x for roller) Features: Hydraulic rear flap & roller Included: PTO shaft Prices + VAT: Brugger FMP180 180cm – 30 hammers, 1,600kg = 10,900 EUR Brugger FMP200 200cm – 32 hammers, 1,700kg = 11,900 EUR Brugger FMP225 225cm – 36 hammers, 1,800kg = 12,900 EUR ----- Contact us for a tailor-made offer!

Condition: new, Year of construction: 2025, The Brugger PX10 wood chipper is powered by a tractor’s PTO and is capable of processing logs with a diameter of up to 10 cm. Its robust construction and high-quality materials ensure reliable performance. Featuring hydraulic drive, it offers an efficient solution for wood processing across various agricultural and forestry applications. - Manual feed - Diameter up to 10 cm - Weight: 165 kg - PTO speed: 540 rpm - Tractor power: 15-65 HP ---- Nsdpfx Aqsw Dnwfsvswg Contact us for your customized offer! Price + VAT For companies with a VAT identification number, a net invoice will be issued.

Condition: new, Hydraulic cable winch HAW3000 with electric valve and radio remote control for wheel loader, excavator, crane, mini-excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW3000 hydraulic winch you can make many applications easier. Maximum cable capacity at 3000 kg tractive force 40 m with 8 mm wire rope. Nwodpfx Ajfn Tu Tjqveg Maximum rope capacity at 1700 kg tractive force 70 m with 6 mm wire rope. Maximum rope capacity with 3000 kg traction force 70 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 100 m with 5 mm plastic rope. Maximum rope capacity with 1000 kg traction force 220 m with 4 mm plastic rope. Basic equipment 30 m 8 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibilities (left, right, rear) with M 12 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 240 bar peak ⦁ Oil flow rate up to 125 l/min short-term max.150 l/min ⦁ Maximum tractive force 3000 kg ⦁ Rope speed 100 m/min with oil quantity 1 [...]

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic winch mounted to help to many applications. -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Nododf Ud Sjpfx Aqvowg Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendulum length: 570 mm Front width: 120 mm Rear width: 180 mm Wide storage: + 30 mm Wide engine:

Condition: new, Hydraulic winch for wood splitter, crane, mini excavator, tractor, tractor, viticulture, horticulture and many more applications. With hydraulic mounting winch you can simplify many applications: -Firewood to the wood splitter drag and set up -The logs move trailer -Remove rootstocks and trees -As growing winds at Rueckekraene and small excavators -As a winch for small tractors and narrow track tractors A robust steel construction with 3-sided bolt-on option (left, right, rear) 12 threaded holes, this provides many options to attach the winch (threads are cut and painted. You must cut before using with the taps because of the rust protection). It is a 20 m long and 6 mm strong steel cable mounted. Large pulley for long service life of the steel rope. We attach the hydraulic motors from 50 to 630 CC (default = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar top Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 nm peak Torque in continuous operation: 380 nm Maximum tractive effort: 1700 kg Weight: 49 kg Line speed: 47 m / min for 60 L / min hydraulic oil Color: Red Dimensions: Length: 500 mm Pendant length: 570 mm Front width: 120 mm Rear width: 180 mm Nwedpfxsdf Ufde Aqvog Wide storage: + 30 mm Wide engine: + 200 mm Height: 250 mm The winch is there to the

Condition: new, Hydraulic cable winch HAW1700 with electric valve incl.manual operation and radio remote control for mounting on wood splitter, crane, mini excavator, tractor, stacker, mower crawler and telescopic loader, in viticulture and horticulture, agriculture, construction and forestry and many other applications. With electric hydraulic valve and radio remote control. With the HAW1700 hydraulic winch you can make many tasks easier. Maximum cable capacity 30 m with 6 mm wire rope. Basic equipment 20 m 6 mm wire rope ⦁ Pulling firewood to the log splitter and setting it up ⦁ Pulling logs onto a trailer ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and small excavators ⦁ As a winch for small tractors and narrow-track tractors A robust steel construction with screw-on options on both sides (bottom, back, top) with M 12 thread. This gives you the possibility to use the winch flexibly. Large rope pulley mounted on bearings on both sides for long service life of the wire rope. Nwedpfx Aqjfn Tvhsvjg The standard pulling force is 1700 kg. The winch can be installed in various positions. A hydraulic brake is available as an option. Depending on the pulling speed and pulling force you need, we can offer you different options. Please contact us, we will be pleased to advise you. ⦁ Maximum working pressure: 225 bar peak ⦁ Continuous operating pressure: 175 bar ⦁ Displacement: 400 ccm ⦁ Torque at 225 bar: 870 Nm peak ⦁ Torque in continuous operation 380 Nm ⦁ Maxima [...]

Condition: new, HAW4000 hydraulic winch without valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, civil engineering and many other applications. HAW4000 hydraulic attached winch can make many applications easier for you. Maximum rope capacity at 4000 kg pull 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg pulling force 90 m at 8 mm wire rope. Maximum rope capacity at 1700 kg tractive force 150 m with 6 mm wire rope. Maximum rope capacity at 3500 kg tensile force 150 m with 6 mm synthetic rope. Maximum rope capacity at 2000 kg tractive force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope Nwjdpefn Tviefx Aqveg ⦁ In viticulture, agriculture, forestry and horticulture. ⦁ In building construction, civil engineering and road construction. ⦁ Pulling out rootstocks and trees ⦁ As an attachment winch on backhoe cranes and excavators ⦁ As winch for tractors, work machines and grape harvesters A robust steel construction with 3-sided bolt-on option (left, right, rear) with M 16 threaded holes. This allows many possibilities for attaching the winch. (Threads are cut and painted. They must be recut before use due to rust protection). Large lubricatable pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak. ⦁ Oil flow rate up to 200 l/min short time max.240 l/min. ⦁ Maximum tractive force 4000 kg. ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color red The winch can be installed in different positions. There is an optional hydraulic brake. Depending on what pulling speeds and pulling forces you need, we can gladly offer you different options. Contact us, we will be happy to advise you. Dimensions: ⦁ Length: 850 mm ⦁ Length with rope inlet 970 mm ⦁ Front width: 200 mm ⦁ Width rear: 300 mm ⦁ Width bearing: + 50 mm ⦁ Width motor: + 300 mm ⦁ Total width: 650 mm ⦁ Height: 420 mm

Condition: new, functionality: fully functional, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS4 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. Nsdpsupiapofx Aqvowg The cone splitter consists of a very sturdy drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in just a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 400 hydraulic motor with up to 1,600 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Nodpfedf Ufpox Aqvswg Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Condition: new, Hydraulic cable winch HAW4000 with electric valve for wheel loader, excavator, crane, mini excavator, tractor, tractor in viticulture, horticulture, building construction, civil engineering and many other applications. With the HAW4000 hydraulic mounted cable winch you can make many applications easier. Maximum cable capacity at 4000 kg tractive force 60 m with 10 mm wire rope. Maximum rope capacity at 3000 kg tractive force 90 m with 8 mm wire rope. Maximum rope capacity at 1700 kg traction force 150 m with 6 mm wire rope. Maximum rope capacity with 3500 kg traction force 150 m with 6 mm plastic rope. Maximum rope capacity with 2000 kg traction force 220 m with 5 mm plastic rope. Basic equipment 50 m 10 mm wire rope ⦁ In viticulture, agriculture, forestry and horticulture ⦁ In building construction, civil engineering and road construction ⦁ Pulling out rootstocks and trees ⦁ As winch for mounting on backhoe cranes and excavators ⦁ As a winch for tractors, working machines and grape harvesters A robust steel construction with 3-sided screw-on possibility (left, right, rear) with M 16 threaded holes. This provides many possibilities for fastening the winch. (Threads are cut and painted. They have to be re-cut before use because of the rust protection) Nwodpfx Asfn Tvkeqvsg Large lubricated pulley for long life of the steel cable. ⦁ Maximum working pressure: 210 bar peak ⦁ Oil flow rate up to 200 l/min short-term max.240 l/min ⦁ Maximum tractive force 4000 kg ⦁ Rope speed 140 m/min with oil quantity 200 l/min ⦁ Weight: 170 kg ⦁ Color [...]

Condition: new, functionality: fully functional, Year of construction: 2024, overall weight: 100 kg, total height: 1,000 mm, color: red, continuous operating pressure: 210 bar, spindle torque (max.): 1,800 Nm, Equipment: hydraulics, Cone splitter Excavator splitter Drill cone splitter Wood splitter KS5 Drill cone 200x400 - Made in Germany The powerful cone splitter for attachment to mini-excavators, excavators, wheel loaders, tractors, skidders and many other options. The drill cone can be exchanged for various tools such as a root cutter, auger, hummus sieve, concrete mixing drum, weed broom and many other attachments. The cone splitter consists of a very stable drive unit and the drill cone (splitting cone) The drill cone is completely hardened. It is not made of unhardened steel as is the case with many other manufacturers. It can be converted to other tools in a few simple steps. - Cone splitter - Root cutter - Earth auger - Weed brush - Sweeping broom - Rotary harrows NO CHINA GOODS ! WE PRODUCE IN GERMANY ! THE ideal multi-purpose tool for foresters, farmers, gardeners, do-it-yourselfers and professionals Overall length 600 mm plus attachment and interchangeable system Universally applicable in construction, forestry, agriculture and horticulture For splitting heavy firewood or wood for wood chips Nwsdpfxouph Uxo Aqvsg For drilling holes in the ground, for stakes, plants and much more For removing rootstocks and tree stumps For cleaning trenches and paved areas For levelling garden areas and creating a fine soil structure You simply do the work from the excavator without any further assistance. A very solid and stable steel construction enables you to work hard and for a long time. In addition to the motor, the shaft is supported by 2 sturdy tapered roller bearings to protect against tension and pressure. The tapered roller bearings can be lubricated for a long service life. A powerful HMT 500 hydraulic motor with up to 1,800 Nm gives you the necessary torque for efficient work, from 25 l/min up to 125 l/min and 210 bar pressure Weight 70 kg included: - Drive unit with powerful HMT hydraulic motor, weight 70 kg - Drill cone with tip Ø 200 mm 270 mm/400 mm long, 6xM16 thread LK173 on the front side Total length 270 mm + drill cone tip 130 mm = 400 mm Diameter 200 mm Weight 30 kg Total weight 100 kg

Year of construction: 2022, condition: new, The operation of different devices such as Kegelspalter, Auger, root cutting, broom, Harrow, and much more is possible with the carrier. The devices are developed in Germany and manufactured. By very stable roller bearings, the forces are safely absorbed in axial and radial direction. A large pipe-strong hydraulic motor has type HMT500, with up to 1600 nm the necessary torque for powerful and efficient work. Oil volume up to 125 l / min, pressure up to 210 bar, speed 240 RPM. Item No.: MTT500 Nwjdpfx Aqedf Sgrovog Augers, drill Cone and other tools on request at an additional cost. Quick change shots MS 01 - MS03 - MS08 or other adapter also on request and at an additional cost.

Condition: new, functionality: fully functional, maximum load weight: 3,000 kg, lifting power: 3,000 kg/m, Year of construction: 2025, Wood grapple for various forestry machines, farm loaders, wheel loaders, loaders, and other carrier vehicles (e.g.: H&R, JCB, Liebherr, Bobcat, Case, Kubota, Manitou, Schäffer, Zeppelin, etc.) Nwsdsvygigjpfx Aqvsg The grapple has an opening width of approx. 1.2m. The rotator allows trunks to be rotated so that they can be picked up or put down precisely. The inclination is adjusted hydraulically so that it can be easily adjusted. Various mounting options are also available, e.g. Euro mounting, H&R standard mounting, etc. Individual adjustment is also possible. Other accessories for forestry machines, wheel loaders, etc. are also available from us. Please contact one of our trained consultants to receive an offer tailored to your needs. We look forward to hearing from you! Your H&R GmbH

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, cutting length (max.): 600 mm, Automatic Wood Sawing and Splitting with the RM480-E from H&R. The H&R Wood Processor RM480-E is the ideal assistant for your firewood processing operations. The new 2025 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Njdpfou Dkufsx Aqvewg Thanks to its innovative design and powerful hydraulic system, operating this wood processor is significantly simplified—ideal for professional forestry operations and ambitious DIY users alike. Unlike competing models, with the RM480 from H&R, ALL functions are hydraulically operated, allowing for faster and easier workflow. Product Features RM480-E Performance: This processor is equipped with a robust 13 HP electric motor. Alternatively, it is also available with a 15 HP petrol engine (RM 480 B). Log Length and Diameter: Logs up to 3 meters in length can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths of up to 60 cm. Hydraulic System: The machine features a hydraulically lowering saw bar. The hydraulic log clamp ensures secure fixation of the wood during splitting operations. Hydraulic height adjustment of the splitting wedge is possible. You can choose between the included 4-way or 6-way splitting cross—for flexible splitting patterns and individual adaptation to your needs. Conveyor Belt: The new 2.2 m long feed belt makes loading logs easier, while the lateral swivel discharge conveyor makes the removal of split wood effortless. Mobile Operation: The processor—including trailer—weights just 750 kg and can be easily moved by hand thanks to its practical transport frame. Simple Operation: All functions can be conveniently operated hydraulically, enabling long working hours without fatigue. At a glance: • Sawing, splitting, and conveying in a single work step • All functions hydraulically operated • Efficient and powerful motor • Splits wood up to 48 cm in diameter and 60 cm in length • Can handle logs up to 3 m in length (with accessory table even up to 6 m!) Price Electric Motor (13 HP) RM 480 E (net) €7,550.00 Petrol Engine (15 HP) RM 480 B (net) €7,385.71 Additional Options With the optional lift table or a chain conveyor, logs up to 6 meters in length can be processed effortlessly. Technical Details Weight (incl. trailer): 750 kg Shipping cost: €300 (transport in iron frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. split wood diameter: 48 cm Max. split wood length: approx. 60 cm Max. log length: 300 cm Motor: Electric, 13 HP Hydraulic oil: 46 Hydraulic connections and control levers are pre-installed, making the machine operational in no time. Take advantage of the powerful and well-engineered technology of the H&R RM 480 wood processor. Order today and make your firewood processing more efficient, safer, and more comfortable!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 550 kg, fuel: super 95, cutting length (max.): 600 mm, Automatically saw and split wood with the RM480-B from H&R. The H&R Log Splitter RM480-B is the ideal assistant for your firewood preparation. The new 2026 model impresses with state-of-the-art technology and high performance for efficient sawing, splitting, and conveying of firewood. Thanks to the innovative design and powerful hydraulic system, work with this splitting machine becomes significantly easier – perfect for professional forestry operations and ambitious DIYers. Unlike competitors, the RM480 from H&R features FULLY hydraulic operation for ALL functions, allowing the work to be completed faster and more easily. Product features RM480-B Performance: The splitter is equipped with a powerful 15 HP petrol engine (RM 480 B). Alternatively, it is also available with a 13 HP electric motor (RM 480 E). Log length and diameter: Logs up to 3 metres long can be securely placed on the sturdy standard table. The splitter handles logs up to 48 cm in diameter and cuts them to lengths up to 60 cm. Hydraulic system: The machine features a hydraulic saw bar. The hydraulic log clamp ensures secure fixation of the wood during the splitting process. Hydraulic height adjustment of the splitting cross is possible. You can choose between the supplied 4-way and 6-way splitting wedges – for flexible splitting patterns and individual adaptation to your needs. Conveyor belt: The newly designed 2.2 m feed belt facilitates log loading, while the laterally pivoting discharge belt makes transferring the split wood effortless. Mobile use: The splitter weighs only 750 kg including the trailer, and thanks to its practical transport frame, it can be moved by hand without difficulty. Easy operation: All functions can conveniently be operated hydraulically, making it suitable for extended operating periods. At a glance • Sawing, splitting, and discharge in one working step • All functions hydraulically controlled • Efficient, powerful engine • Splits wood up to 48 cm in diameter and 60 cm in length • Logs up to 3 m long (up to 6 m with accessory table!) Price Nwodpfou Dnruox Aqvjg Petrol engine (15 HP) RM 480 B (net) €7,385.71 Electric motor (13 HP) RM 480 E (net) €7,550.00 Additional options With the optional lifting table or chain conveyor, logs up to 6 metres in length can be effortlessly processed. Technical details Weight (incl. trailer): 750 kg Freight cost: €300 (transported in steel frame, without hydraulic oil) Final assembly time: approx. 4 hours Max. log diameter to split: 48 cm Max. log length to split: approx. 60 cm Max. log length: 300 cm Engine: Petrol, 15 HP Displacement: 420 cm³ Engine oil: 10W30 Hydraulic oil: 46 Hydraulic connections and control levers are already preinstalled, so the machine is ready for operation within a very short time. Benefit from the powerful and well-designed technology of the H&R log splitting machine RM 480. Order today and make your firewood processing more efficient, safer, and more convenient!

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer! Nwodovpfutjpfx Aqvjg

Condition: used, empty load weight: 3,310 kg, maximum load weight: 3 kg, overall weight: 6,500 kg, tire size: 285/65R18, tire condition: 50 %, color: orange, total length: 435 mm, Year of construction: 2009, front tire size: 285/65R18 | 50%, rear tire size: 285/65R18 | 50%, operation weight: 6,500 kg, maximum speed: 60 km/h, Equipment: air conditioning, Tyres (front): 285/65R18, Tyres (rear): 285/65R18, First registration: 25.11.2009, Automatic towing hitch. We are offering a used Hansa APZ 1003 L transporter tool carrier from the year 2009 with approx. 40,000 km and approx. 3,600 operating hours for sale. Equipment: 133 HP, registered as LOF (agricultural or forestry) tractor tool carrier, tyres 285/65R18, diesel, rotating beacon, four-wheel steering, tipper platform. The machine has the following defects and is being sold as a handyman's vehicle: - Right rear axle drive shaft defective - Steering cylinders on front and rear axles leaking and piston rod damaged - Hydraulic oil loss in the area of the hydraulic cooler. Further details available on request. Location: 93095 Hagelstadt. Nwedpfx Aqjyq Ayajvjg

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Holp CutWheel / CW.149.140 / incl. MS10 mounting / HARDOX / NEW / in stock & immediately available Price: €18,590.00 net / €22,122.10 gross - Suitable for excavators: 12 – 17 t - Own weight approx.: 670 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 200 mm - Cutting width: 1,360 mm - Cutting height above ground: 150 mm - Oil flow: 100 – 110 l/min - Hydraulic pressure: 180 – 200 bar - Recommended blade speed: 80 – 100 rpm Advantages of the Holp CutWheel: Nwodpfx Aqoynrhzevog - Clean cutting of all types of wood due to adjustable counter blade - Significantly more economical operation as less manpower and fewer machines are required, while maintaining a high level of operational safety - 3-in-1 functionality: cutting (3 mm to 50 mm), sawing (50 mm to 200 mm), and piling of cut material - Work at heights up to 8.5 meters with a 10-tonne excavator and up to 10 meters with a 15-tonne excavator - The cutting wheel operates in two directions and easily handles diameters from 3 mm to 20 cm - High robustness (cutting wheel made from fine-grain steel) - Cutting and sawing direction as well as diameter are adjustable from the cab without interrupting the work process, which also ensures greater safety - Significant savings as the CutWheel on the excavator replaces a platform lift – thus, the CutWheel replaces various machines and manual labor - The robust design also allows for pushing material lying on the ground, similar to a broom - As the CutWheel does not saw but pinches the wood in both cutting directions, wood fibers are not torn out as with a conventional saw blade. This results in a smooth cutting surface, preventing fungal infestation - Three hydraulic connections are required: Double-acting work line for cutting/sawing blades 1 x leakage oil We have many other Holp products available for immediate delivery in our warehouse! Mr. Herden (phone) will be pleased to assist you. Upon request, we are happy to provide you with a financing offer. We are an official Holp sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Westtech sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction equipment sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Empty weight: 670 kg Part suitable for: Forestry applications Please contact...

Condition: used, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Holp CutWheel / CW.099.110 / incl. MS08 mount / HARDOX / NEW / in stock & immediately available Price: €14,290.00 net / €17,005.10 gross - Suitable excavators: 7 – 11 t - Own weight approx.: 490 kg - Cutting material diameter (cutting direction): 3 – 50 mm - Cutting material diameter (sawing direction): 50 – 170 mm - Cutting width: 1,000 mm - Cutting height above ground: 100 mm - Oil flow rate: 50 – 60 l/min - Hydraulic pressure: 180 – 200 bar - Recommended knife rotation speed: 100 – 120 rpm Advantages of the Holp CutWheel: - Clean cuts on all types of wood thanks to the adjustable counter-blade - Significantly more economic operation as less manpower and fewer machines are required, while ensuring high occupational safety - 3 work steps in one: cutting (3mm to 50mm), sawing (50mm to 170mm), and collecting the cut material - Work at heights up to 8.5 meters with a 10-ton excavator and up to 10 meters with a 15-ton excavator - The cutter wheel works in both directions and easily processes diameters from 3 mm to 17 cm - High durability (cutter wheel made of fine-grain steel) - Cutting and sawing direction as well as diameters can be adjusted from the cab, so work does not need to be interrupted—this also ensures increased safety - Significant savings, as the CutWheel on the excavator replaces a lifting platform—thus, the CutWheel replaces various machines and even manual labor Nedpfsynrhuex Aqvjwg - The robust design also allows pushing together of material lying on the ground, similar to sweeping with a broom - As the CutWheel does not saw but 'shears' the wood in both cutting directions, the wood fibers do not tear as with a conventional saw blade. This ensures a smooth cutting surface, which prevents fungal infestation - Three hydraulic connections required: Double-acting working line for cutting/sawing saw blades 1 x leak-oil return We have many more Holp products in stock and available for immediate delivery! Mr. Herden (phone) will be happy to advise you. On request, we can also provide you with a financing offer. We are an official sales and service partner for Holp. We are an official sales and service partner for Gierking GMT. We are an official sales and service partner for OilQuick. We are an official sales and service partner for Weber MT. We are an official sales and service partner for Westtech. We are an official sales and service partner for DMS. We are an official sales and service partner for Seppi M. We are an official sales and service partner for Magni telehandlers. We are an official sales and service partner for JCB construction equipment. We are an official sales and service partner for Mercedes-Benz. We are an official sales and service partner for Iveco. Additionally, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Holp range for you! Subject to errors and prior sale! New: Yes Unladen weight: 490 kg Part suitable for: Forestry applications Please contact us...

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ Nedpotpxgtofx Aqvswg 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!

Condition: new, functionality: fully functional, The Brugger PX130 wood chipper is operated via the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 13 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed - Diameter up to 13cm - Weight 420kg - PTO speed: 540 rpm - Horsepower tractor: 30-70 hp Nwsdperblwdjfx Aqvsg

Condition: new, The Brugger PX180 wood chipper is a powerful shredder for professional use. With an impressive capacity of up to 18 cm in diameter, it enables efficient shredding of wood logs. The hydraulic inlet is equipped with a "No Stress" system to ensure smooth material feeding. Sturdy construction and high-quality materials ensure reliable performance and long service life. - Hydraulic inlet with automatic "No Stress" - Diameter up to 18 cm - Weight 648 kg - Power take-off speed: 540 rpm - Three-point attachment: CAT 1, 2, 3 - Minimum tractor power requirement: 50 hp Njdpfx Aorblyreqvswg The PX180 is the ideal solution for agricultural and forestry applications where efficient wood processing is required.

Condition: new, The Brugger PX170 wood chipper is operated by the PTO shaft of a tractor and is capable of shredding logs with a diameter of up to 17 cm. The robust design and high-quality materials ensure reliable performance. With hydraulic feed, it is an efficient solution for wood processing in various agricultural and forestry applications. - Hydraulic feed Nedpfx Aqorblx Hevowg - Diameter up to 17cm - Weight 570kg - PTO speed: 540 rpm - HP tractor: 40 - 100 HP