Used Forging Furnace for sale (935)

Condition: new, Year of construction: 2024, Drying and Burn-in Furnace TRO, Model I For drying racks with max. 50rods, useable size 60x90cm, outer dimensions: approx. 2290mm wide x 1390mm deep x 2230mm high, useable space: approx. 1400x1070x1660cm. Suitable for vaporisation of low amounts of solvent, authorised for inks and solvents up to hazard class A II, according to safety requirements DIN EN 1539. Equipped with control of the minimum exhaust volume and a heating system in regard to the exceedance of the max. temperature. Fixing and drying temperature: up to max. 180°C. Power connection: 400V/50Hz, 21kW, weight: approx. 650kg, varnishing: corps RAL 7035 (light grey), doors RAL 7037 (dust grey). Special varnishing upon request. Chamber dryer, all-steel construction, with good thermal insulation. Simple insertion of drying racks by means of easy-to-open wing doors. The air is sucked out of the drying chamber by ventilators, is blown through thermostat-controlled heating registers and re-fed temperature-controlled to the drying chamber. The solvents released during the drying process are dissipated from the exhaust side of the ventilator while supply air gets into the drying chamber. The horizontal air guide in the drying chamber guarantees an even temperature control. The required temperature can easile adjusted via actual and nominal value thermostat. Overheating protection by safety thermostat. Particularly suitable for fixing and drying of textile inks, flock glues as well as for burning-in of plate and aluminium signs up to 180°C. - Various drying racks for different applications available. - We recommend the installation of a gas warning unit. Delivery time 10-12 weeks. ATTENTION: Not permitted for solvents! Not permitted for foods! Nsdpfed I T Exox Ab Dedd

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Ndjdpfxshz D Iwe Ab Dsd MARCELS MASCHINEN AG

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Chamber furnace with exhaust hood, very good condition. 12 months warranty - Max temperature: 1300 °C - Internal dimensions (W x D x H): 400 x 400 x 400 mm - Capacity: 60 liters - Separate main switch - 5-sided heating - Air supply and exhaust with dampers, electrically operated via Belimo actuators - Supply air fan controlled by frequency converter via controller - Stainless steel exhaust hood - Bentrup 507 control system, thyristor control - Controller language: German only, cannot be switched to other languages - Additional drag element type S for external recording Ndsdstbq Eqjpfx Ab Djd - Documentation included - Net weight: 250 kg - Power consumption: 18 kW - Current draw: 26 Amps - Connection voltage: 3/N/PE 400VAC - Connection type: prepared for fixed installation, 32 A plug Furnace has been overhauled, all switching electrical components are new. Supplied with warranty. We have several units of this furnace type in stock. Viewing by appointment. Furnace, furnaces, annealing furnace, industrial furnace, chamber furnace, kiln, enamelling furnace, tempering furnace, laboratory furnace, hardening furnace.

Condition: good (used), Year of construction: 1940, functionality: fully functional, type of input current: three-phase, total height: 4,000 mm, total width: 3,000 mm, total length: 6,000 mm, year of last overhaul: 2021, input voltage: 10,000 V, temperature: 1,600 °C, power: 1,200 kW (1,631.54 HP), overall weight: 30,000 kg, Klein Lichtbogen Ofen 3-5 tonen Kapazitaet, 1,2 MW/ 10 kV. Ndjdpfx Abog S U Dko Dsd

Condition: ready for operation (used), functionality: fully functional, Gas inlet: AR Nodexnpw Espfx Ab Dsdd Alternatre Gas inlet. Good working condition. Please check out our other listings as well.

Year of construction: 2003, condition: excellent (used), For sale Nabertherm N650/G furnace Furnace in very good condition with shelves and frame. Technical data: Capacity 650 L Nsdpfx Asvrg Sljb Dsdd Power: 26 KW Voltage: 400 V Current intensity: 37.5 A Max temp: 900 degrees Celsius Chamber dimensions width 70 cm depth 85 cm height 110 cm External dimensions width 112.5 cm depth 155 cm height 192 cm Nabertherm C40 controller

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Max temperature: 1000°C Ndedpfxsxcb Hns Ab Djd

Condition: good (used), Internal dimensions 250 x 400 x 160 mm Temperature 1150° MARCELS MASCHINEN AG Nsdpevhazfofx Ab Dodd

Condition: as good as new (ex-display), Year of construction: 2025, Exhibition machine (new), available immediately - Internal dimensions (WxDxH): 1250 x 4000 x 1450 mm - External dimensions (WxDxH): 1900 x 4900 x 2500 mm - Power consumption: 240 kW - Current consumption: 350 amperes - Maximum temperature Tmax: 1300°C - Furnace weight approx.: 6000 kg - Control system: JUMO IMAGO 500 with software packages (OPCA & PCC) - Chart recorder: JUMO Logoscreen 601 Nsdsp H Tb Tepfx Ab Dedd - Includes feedthrough and 6 additional sockets for recording customer type K thermocouples - Multizone design (3 zones) - Control panel with solid-state relays - Control panel air conditioning - Automatic supply and exhaust air dampers - Automatic exhaust air dampers, regulated as follows: small cooling (2 dampers open), large cooling (all 6 dampers open) - Regulated cooling system (including frequency converter, controlled by the control system) with supply air fan - Electrically driven bogie hearth on rails - Max loading capacity 3.5 tons, reinforcement available on request! Metal loading surface for bogie hearth on request! - Swing door - Documentation and CE declaration Reinforcement of the bogie hearth available on request! See image 4 (conversion example)! We are happy to offer installation, commissioning, and staff training. Please contact us! We supply new and used industrial furnaces. Viewing available in our warehouse upon request! Keywords: bogie hearth furnace, bogie furnace, ovens, annealing furnace, firing kiln, hardening furnace, heat treatment furnace, oven, tempering furnace, curing oven, drying oven, industrial furnace

Year of construction: 2013, condition: used, max. temperature 1.100 Grad size of opening 250 x 170 mm depth of chamber 370 mm volume 15 L voltage 230 V total power requirement 3,6 kW weight of the machine ca. 40 kg dimensions of the machine ca. 0,48 x 0,65 x 0,57 m Ndsdpjxf I T Hjfx Ab Ded - Serial-No.: 271414 - control: NABERTHERM B180

Condition: ready for operation (used), A floor chamber furnace of an unknown make is available. Internal volume: approx. 4m³, temperature range: 50°C-400°C, internal dimensions X/Y/Z: approx. 1800mm/1500mm/1800mm, machine dimensions X/Y/Z: approx. 2500mm/2500mm/2500mm. An on-site inspection is possible. Nodpfxoxp Rbhs Ab Dedd

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Wiesheu furnace for sale. 8+4 tray design, with 2 loading trolleys, own extractor hood. Continuously serviced by brand service. Nsdpfx Asuxfmljb Dsdd

Year of construction: 1985, condition: used, Hardening furnace Heraeus Nsdegtxuqspfx Ab Djdd Type KM 260 width 250 mm height 150 mm depth 500 mm Temperature up to 1150 c

Condition: good (used), Internal dimensions diametre x depth 430 x 630 mm Temperature 800° Njdpjw Nnquefx Ab Dedd MARCELS MASCHINEN AG

Condition: as good as new (ex-display), Year of construction: 2023, type of input current: AC, El. heated roller sintering furnace, make Riedhammer Ndsdpsp T Th Hefx Ab Djd type: TR 18/4x33/10-E 90 condition: as new length of debinding zone: 6.12 m length of heating/holding zone: 6.12 m length of the cooling zone: 6.12 m total length of oven without conveyors: approx. 18.4 m total length of oven with conveyors: 20.4 m total width of oven: 3.5 m total height of oven: approx. 2.5 m clear oven width: 1,540 mm usable width: 4x 330 mm usable height from top edge of roll: 100 mm roller spacing: approx. 85 mm roll diameter: approx. 50 mm number of oven conveyor drives (controlled): 3 pieces number of rule groups: 34 connected load of oven: approx. 476 kW maximum temperature on the thermocouple: 900 °C max. temperature: 930°C power type: 400/230V, 50Hz cooling water consumption: approx. 50 m³/h

Condition: ready for operation (used), Electric furnace REAG – 10 kW | 290V | 17.5A I will sell an industrial electric furnace from the renowned Italian company Reag, designed for applications requiring high temperatures, such as heat treatment of metals, firing ceramics, glass processing or laboratory work. Technical data: Power: 10 kW Voltage: 290V Current: 17.5A Connection system: Star (Y) Ndedev Drpyopfx Ab Ded Serial number: 1796 Manufacturer: Reag (Italy) Condition and use: The furnace is in good technical condition, fully functional and ready to work. It was used as intended in industrial conditions.

Condition: good (used), Year of construction: 2001, functionality: fully functional, type of input current: three-phase, Glass tempering furnace Ndedpfx Abovkhl Ds Dsd TAMGLASS, HTF-2136-ABT-10-R 3,8 – 19 mm, 2100 x 3600 mm, Right-Left Year: 2001. Without convection Noise reduction cabin included 400 V, 50 Hz, total power: 800 kW (heating 470 kW, motors 330 kW) In good technical condition. Inspection is possible by appointment.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 3945, Retort Type Mesh Belt Furnace Typ: BLH with protective gas atmosphere Heat treatment line with protective atmosphere KOHNLE BLH-950-250/50-1800 Year of production: 2003 Serial number 3945 Hardening in a protective atmosphere, cooling in oil, washing and degreasing and tempering It consists of - Vibrator for charging - 300 kg capacity - Magnetic conveyor for filling the furnace - Tempering furnace - max working temperature 950 C 3 temperature control zones strip width 250 mm Capacity 30-50 kg/h Tunnel length 1800 mm Protective atmosphere Propane (possible change of gas for a protective atmosphere) - Oil quench with cooling oil, temperature 70C - Magnetic conveyor for extracting goods - Stand for washing and degreasing - vibrator for charging Annealing furnace - max temperature 500 C Control cabinet SIEMENS ALL ORIGINAL TECHNICAL DOCUMENTATION FROM THE MACHINE Installation dimensions 17 m x 2 m x 2.5 m Ndodpfow Tcruox Ab Ded The furnace can also be modified for nitrocarburizing. Dismantling and loading costs are charged additionally The price of the mentioned line is not fixed for serious enquiries

Year of construction: 1984, condition: ready for operation (used), Two industrial shaft furnaces Nabertherm for heat treatment are available. 1) Nabertherm S430, year of manufacture: 1984, power: 54kW, max. temperature: 1200°C, usable volume: approx. 430l. 2) Nabertherm S300/SO, year of manufacture: 1977, power: 36kW, usable volume: approx. 300l. An on-site inspection is possible. Nodpfxexn S Ugo Ab Dedd

Year of construction: 1978, condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Ndedpfxjivqane Ab Ded

Year of construction: 2023, condition: new, El. heated two-track plate pusher furnace, make Riedhammer type: TP12,75/2x20/15-E-145 condition: as new total length of oven: 15.5 m furnace width: 3.6 m voltage type: 400/230V, 50 Hz connected load: 17 kVA tolerated voltage fluctuation: 10% tolerated frequency fluctuation: 1% PLC: SIEMENS/Comfort Panel TP1500-15 product structure (L x W x H) Ndsdpfx Asp T T Hnjb Djd including push plate: 200 x 200x 101 mm Tmax debinding zone (4 segments): 650 °C Tmax pressure compensation zone (1 segment): 750 °C Tmax main combustion zone (6 segments): 1450 °C Tmax cooling module 1: 600 °C Tmax cooling module 2: 300 °C min. push time: 8 min max push time: 30 min number of conveyor plates: 266 pieces channel height: 105 mm

Year of construction: 1969, condition: used, Technical data: Power: 2.2 kW Connection: 220 V Dimensions: Frame (WxDxH), approx.: 310 cx 355 x 755 mm Oven (WxDxH), approx.: 370 x 550 x 400 mm Oven interior (WxDxH), approx.: 180 x 23.5 x 120 mm Ndsdpfx Asu Atiisb Djd Equipment: - Various tongs

Condition: excellent (used), max. temperature 1200 Grad size of opening 220 x 120 mm depth of chamber 400 mm dimensions of the machine ca. 1,4 x 1,2 x 1,6 m Nedpexcbldjfx Ab Dedd

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: ECO, total width: 1,000 mm, total length: 2,000 mm, type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, inner dimension height: 450 mm, Type: ECO Manufacturer: RCN ENGINEERING Year of production: 1999 Internal kiln dimensions: 2000 x 1000 x 450 mm Ndodpfxewtpf Ao Ab Dod NOTE: Glass fusion molds are included with the kiln.

Condition: excellent (used), Mesh belt continuous furnace CIEFFE type: FNC procedure: tempering, carbonitriding, case hardening lenght: appr. 52 m belt (H x w x d): 25 X 930 X 9300 mm production output: 80-1000Kg/ h connected load: 170kW (HTO) + 35kW (wash) + 135kW (tempering) Heating capacity of natural gas: 768kW (annealing furnace) + 643kW (tempering furnace) annealing furnace: Belt speed: 20 -172 mm/min max. temperature: 910°C temperature uniformity: ± 7°C (area 1-3), ± 5°C (area 4-6) washing machine: Nsdpfx Abexpuaho Dedd wide conveyor belt: 1000 mm washing sink: 1800 lt rising tank: 1200 lt quantity per hourly production: 700dm3/h tempering furnace: belt speed: 60 - 234 mm/min max. temperature: 650°C temperature uniformity: ± 5°C (150-600°C)