Used Forging Furnace for sale (899)

Condition: good (used), Year of construction: 1989, total height: 6,450 mm, For sale Beche short-stroke die hammer KGH 4B. Machine weight 65 t Working capacity 40 kJ max. impact frequency 98 min max. usable number of blows 41 min max. bear stroke 790 mm Machine is disassembled Ncjdpfx Aqert Uc Eovst Technical data on request

Condition: used, Year of construction: 2011, functionality: unexamined, total length: 1,700 mm, total height: 1,400 mm, total width: 680 mm, overall weight: 400 kg, Centrotherm VLO 20-N2-HCOOH Vacuum Furnace/Process System Njdpfx Aoyubphoqvsct Thermal process system with nitrogen and formic acid supply, including Leybold vacuum pump and control system. Year of manufacture: 2011. Well-maintained exterior condition, but without documentation and no available password – therefore only partially tested. Power: 10 kW; Load current: 25 A; Supply: 3/N~ 400/230 V 50 Hz; Breaking capacity: 0.3 kA; Operating hours: approx. 21,286 h

Condition: ready for operation (used), Romanian Forging Hammer CM 2500 (The hammer is similar to Huta Zygmunt MPM 6300B) - Maximum impact energy at full stroke: 7000 kgm - Ram weight: 2500 kg - Mode of operation: pneumatic - Ram stroke: 850 mm - Number of blows per minute: 100 Ncsdpew Sdxajfx Aqvjt - Working pressure: 5–7 bar - Anvil weight: 48 t - Total weight: 65 t Romanian Forging Hammer CM 1250 (The hammer is similar to Huta Zygmunt MPM 3150B) - Maximum impact energy at full stroke: 3600 kgm - Ram weight: 1250 kg - Mode of operation: pneumatic - Table size (front to back): 700 mm - Stroke: 800 mm - Number of blows per minute: 110 - Working pressure: 5–7 bar - Max. upper die weight: 400 kg - Die height: 220 mm - Ram (front to back): 500 mm - Air consumption: 15 m³/min - Anvil weight: 24 t - Height of machine above floor: 3750 mm - Total machine height: 4380 mm - Total weight: 35 t

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Ncjdpfex Ahbfjx Aqvst

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Njdpfxevbcxtj Aqvjct Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 1,00,000 kg, workpiece weight (max.): 18 kg, Forging hammer HUTA ZIGMUNT type MPM 3000 The same type as MPM 10000 Energy of blow: 10 000 kgm Ram weight: 3 570 kg. Max. ram stroke: 1 000 mm Number of strokes per minute: 90 Total weight: 100 ton Anvil weight: 70 ton Nedpelnllbofx Aqvsct The hammer is equipped with modern CNC lubricating unit and set of anti-vibration pads. AHAT SK Ltd., Bulgaria +359 889 433449

Condition: excellent (used), Stock number: 2896 Ncedpfxeurf H Rs Aqvot Manufacturer: Heraeus Year of manufacture: Machine number: 7406922 Type / Model: MR 260 Interior width x height:: 260 x 160 mm Interior depth: 500 mm Temperature: up to 1000 °C Connection: Accessories/equipment: Condition: very good Weight: 0.15 t Dimensions: 1,100 x 700 x 1,600 mm

Condition: used, machine/vehicle number: 27742, type of input current: three-phase, pressing force: 200 t, table width: 1,200 mm, table length: 1,000 mm, ram plate width: 160 mm, distance table to ram: 500 mm, overall weight: 23,600 kg, distance between stands: 350 mm, ram adjustment: 100 mm, stroke rate (max.): 35 1/min, MINALI mechanical eccentric press model 2MI 200, 200 tons, high-rigidity double-column frame, Italian industrial construction. Robust and heavy-duty machine (approx. 23,600 kg), ideal for: Blanking Sheet metal stamping Bending Light deep drawing Ncedsyutk Djpfx Aqvot General mechanical operations Equipped with: Slide stroke 250 mm Ram adjustment 100 mm Table size 1200 x 1000 mm 35 strokes/min Main motor 20 HP Pneumatic system Centralized lubrication Pedal and push-button control Anti-repeat system Emergency stop Machine complete with original electrical cabinet and technical documentation.

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C In the past, the oven was part of a plant and the product was transported via a conveyor belt, Nodevgy Ivjpfx Aqvect The oven was previously controlled by PLC, it was dismantled,

Condition: excellent (used), Despatch LCC2-14NV-3 Year of manufacture: approx. 2018 Max. temperature: 260 °C / 500 °F Power: 415V - 1PH - 50 Hz Ncjdpfoyvlausx Aqvet Full Load Amps: 25.2 AMPS S.C.C.R: 5 kA Heater: 16 kW / 22.3 AMPS Largest Motor Amps: 2.1 AMPS Total Motor Amps: 3.2 AMPS

Year of construction: 2013, condition: ready for operation (used), functionality: fully functional, - Compact tabletop model with user-friendly, parallel upward-opening door - Double-walled housing with blower cooling, low external surface temperature - Furnace insulation made of low thermal mass alumina material, allowing for rapid heating and cooling - High-quality heating elements made from molybdenum disilicide (MoSi2) - Low power requirements - Heating elements controlled via thyristors, ensuring extremely precise furnace control; wear-free and silent operation - High temperature accuracy inside the furnace chamber - Exhaust vent in the furnace ceiling Incl. PC: HP Compaq dx2300 Microtower Dx2300M/E2160/160hnd/1024L/4rf, Dual Core with Microsoft XP + DVD drive + 19" Philips monitor Model ID: 190B4CS/00 (Company: Bechtle, Heilbronn 26.09.2003 net €528 Inventory No. 5633) with Eurotherms iTools with Wizards pre-installed and on DVD, all necessary cables, keyboard, Logitech wireless mouse Njdpsytr Eksfx Aqvoct

Condition: used, Year of construction: 1957, ram hammer weight 200 kg ram hammer stroke 525 mm no. of strokes 150 /min impact energy 420 kJ distance lower die block / ram gudeway 435 mm Throat 425 mm steel forging - rectangular up to 110 mm steel forging - diameter up to 125 mm power requirement 22,0 kW weight of hammer 3,9 t weight of anvil 3,0 t weight 6,9 t dimensions (WxDxH) 1,1 x 2,3 x 2,4 m Forging hammer Ncjdpevzxpbsfx Aqvjt as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t Nedodxvfpopfx Aqvoct pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: new, 7 pieces heating coil new for a melting furnace Fulmina SOU 20E, Technical data: Reversible element with connection ends Ø 10 x 270 mm power: 10.000 Watt Voltage: 220 Volt cold resistance: 4,60 (± 5%) Ohm wire diameter: 4,50 mm coil inner Ø: 29 mm leg length: 240 mm Number of legs: 3 x 8 pieces Njdpfx Aqjd Tx A Eovsct Wire quality: CrFeAl Y 3 heating coils are a complete set in this model (the pictures of the melting furnace serve the representation and show the model in which the heating coils were installed, they fit however also into other models with smaller or higher achievement, it changes only the number of pieces) immediately available from stock

Condition: used, Year of construction: 2011, Technical details: temperature min.: 1 ° temperature max.: 199 ° electrics - voltage/frequency: 380 / 50 V/Hz heating capacity: 1,8 (1800 Watt) kW protection class: IP 54 total power requirement: 16,2 kW weight of the machine ca.: 0,93 t dimensions L x W x H: 2,85 x 2,0 x 1,4 m Pre-polymerization tunnel - Heat treatment tunnel Application: drying for washing and painting lines - pass through Sold as is and described! other features: -recommended temperature according to manufacturer max. 80°C; safety setting 90°C; heating 230V -with chain conveyor/feed line made of Teflon -chain width 200mm -max. workpiece width 150mm Njdpfx Aqou Nw E Uovsct passage W: 150 x H: 110mm, running height 600mm; operation motor SEW Eurodrive (gear motor) power 0,18kW loading W x H: 500 x 800mm unloading door W x H: 600 x 1200mm access door W x H: 800 x 980mm with safety locking system room height 1400mm *

Condition: used, Year of construction: 1969, ram hammer weight 480 kg stroke 710 mm throat 550 mm impact capacity 1250 kpm no. of strokes 210 Hub/min ram hammer stroke 710 mm work height max. 720 mm total power requirement . kW weight of the machine ca. 7,4 t pressure 400 kg Steam drive No. 3065 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Ncjdpsyqur Iofx Aqvot Your Markus Hirsch Team

Condition: used, ram weight 1000 kg stroke 1000 mm throat 800 mm impact capacity 4200 mkp total power requirement . kW Steam drive The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Ncjdpfx Aqsyquf Uevot Your Markus Hirsch Team

Year of construction: 1969, condition: used, rated capacity 2000 KG ram hammer stroke 1080 mm throat 1100 mm impact capacity 10000 kgm no. of strokes 125 Hub/min ram hammer weight 2300 kg work height max. 620 mm total power requirement . kW Steam drive No.3064 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Ncsdpfoyqualox Aqvot We look forward to your visit. Your Markus Hirsch Team

Year of construction: 2000, condition: repair required (used), We are offering this SAFED conveyor belt furnace in need of repair, year of manufacture 2000. Numerous spare parts are included. Manufacturer: Safed Model: 1 used continuous furnace Year of manufacture: 2000 Operating temperature (hardening furnace): 870-930°C Gas power: 240 kW A Max. gross batch weight: 400 kg/h Max. batch width: 600 mm Quenching type: oil Tempering furnace: Gas power: 215 kW Operating temperature: 170-650°C Max. batch weight: 400 kg/h Njdpfxoyr Atpj Aqvsct Washing machine: Max. batch weight: 400 kg/h The system is still operational until the end of March 2026. Several spare parts are also included. Original purchase value approx. €85,000. All prices are ex works Kehl; disassembly and all subsequent costs are the responsibility of the buyer. VAT is not included in the prices. Subject to prior sale and errors. Used equipment is sold without any warranty or guarantee. We cannot be held liable for personal injury or property damage during disassembly by the buyer. Place of jurisdiction is Germany. All agreements are made under German law. The material remains the property of the seller until full payment has been received. If you have any questions or require further information, please feel free to write us a message or give us a call.

Condition: used, heating: electrical Njdpfxov Sbc Ej Aqvsct useable space: ø400 x 400 mm temperature: max. 1.300°C ventilation: exhaust fan during the cooling phase and activated cooling fan ultimate vacuum: 10 mbar exhaustion time: ca. 5 min nitrogen: inlet pressure min. 3 bar oxygen: inlet pressure min. 3 bar

Condition: refurbished (used), Roller hearth furnace, make Mahler Ncedpfx Aofc Hbdoqvjt type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen

Year of construction: 2006, condition: good (used), machine/vehicle number: 3206, HEAT TREATMENT FURNACES CMS ITALIA model DMH 7, MFG: 2006, serial no. 3206 - installed power 15Kw - supply voltage 220V - maximum temperature 1000 °C; - useful width 450 mm - useful height 250 mm - room depth 800 mm - current absorption 39.5 A - frequency 50 Hz Price Euro 4.300 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare Nodpfxsldfgps Aqvect We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: good (used), Make: ELIOG Year of manufacture: 1992 Opening (W x H x D): 150 x 110 x 350 mm Temperature: up to 1,350 °C Nominal power: 4 kW Connection load: 5 kW Accessories/Equipment: separate control cabinet Condition: good Total weight: 170 kg Njdpfx Ajym U Sgsqvoct Furnace dimensions: 500 x 600 x 430 mm Control cabinet dimensions: 450 x 550 x 700 mm

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, total length: 23,000 mm, type of input current: AC, number of chambers: 1, Equipment: documentation/manual, Glass tempering furnace TAMGLASS / GLASTON, HTF-2442-CTA-10-L 2400 x 4200 mm, Left – Right Year: 1999. With convection (Low-E glass) Noise reduction cabin included. 400 V, 50 Hz, total power: 1160 kW (heating 630 kW, motors 530 kW) In good technical condition. Inspection during production is possible by appointment. Available: SEPTEMBER 2026 Nedjylaqljpfx Aqvsct

Condition: good (used), Basket LxWxD 300 x 210 x 460 mm 150-500 Degrees Njdpfohz D Iwox Aqvect MARCELS MASCHINEN AG