Used Forging for sale (178)

Condition: ready for operation (used), Romanian CFL 5000 Nominal weight of falling part – 5000 kg Max. stroke – 1700 mm Impact energy – 17000 kg-m Hjdpfx Asy Ud N Sjdwofk Daylight between columns – 3900 mm Number of impacts – 40/min Weight approximately 170 tons Video showing the machine in operation available! Romanian CFL 3150 Nominal weight of falling part – 3150 kg Max. stroke – 1250 mm Impact energy – 80 kJ Daylight between columns – 4000 mm Number of impacts – 45/min Weight approximately 87 tons Video showing the machine in operation available!

Condition: refurbished (used), functionality: fully functional, machine/vehicle number: 232657 SZ. 281, overall weight: 2,400 kg, total width: 1,350 mm, total length: 1,200 mm, total height: 2,400 mm, type of input current: three-phase, input voltage: 400 V, year of last overhaul: 2023, Refurbished eccentric press from a traditional blacksmith's workshop. An eccentric press manufactured by Ganz and Társa in 1897, now in fully refurbished condition, is for sale, complete with a set of rare cutting tools. During the refurbishment, the following parts were replaced: - Main shaft grey cast iron bearings - Drive shaft - Drive shaft bronze bearings Hfsdpezt Dmfjfx Adwsk - 3 locking pins - All protective covers - Complete repainting (with the cast surface pre-cleaned by shot blasting) The cutting tools can still be used to create various leaf and flower patterns, which are then shaped into their final form by hand. This process allows for the traditional production of completely unique shapes that are no longer available commercially. The machine has a unique historical background, and I can share more information and archival images with the buyer.

Condition: used, Year of construction: 1983, nominal force 2500 t stroke 600 mm cycle time 13 - 18 s Hsdpfx Aszrpuledwjfk distance between columns 1720 mm Distance table/ram, max. stroke up, adjustment up 2600 mm table surface area 1720 x 1800 mm allowed max. force 4000 t blow die to die 5000 t ram surface 2100 x 1320 mm capacity of ejector in table 40 t ejector stroke in table 250 mm ejector surface area in table 900 x 820 mm capacity of ejector in ram 6 t ejector stroke in ram 40 mm spindle diameter 425 mm power requirement 900,0 kW weight 335,0 t Dimensions (WxDxH) 3,4 x 4,6 x 9,7 m height over floor 8,3 m fully automated forging line / spindle press with automation for the production of flanged shafts for hot forming only with reversible AC motor, pneumatic brake, plate ejector in table (40 t / 250 mm), ejector in ram (6 t / 40 mm), lifting device for repositioning, marking, tool change, insertion device, tilting device, loading and unloading arm, rotary table, circular oil lubrication, centralised grease lubrication cycle time approx. 13 - 18 s as is where is, WITHOUT putting into operation

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Power 500 to Table dimension 1020x1420 mm Stroke 400 mm Hfjdpfxovbcxts Adwek No of strokes / min - 12 Main motor 41kw Movie available

Condition: ready for operation (used), Forging hammers, C type, capacity 80 kg, 400 kg and 750 kg. Ram weight: 80, 400 and 750 kg. Blow energy: 150, 1000 and 2000 KJ. Stroke: 385, 670 and 835 mm. Strokes/min: 210, 130 and 105. Weights: 3,500 kg / 13,500 kg / 25,000 kg. Hodjx Ahbfopfx Adwefk

Condition: like new (used), The Hammer is simmilar with Huta Zygmunt MPM 3150B. -maximum energy of impact at maximum stroke - 3600kgm; -ram weight - 1250kg; Hfodpfx Aofbnhwsdwok -mode of operation – pneumatic; -table size (front to back) - 700mm; -stroke - 800mm; -number of blows per minute – 110; -working pressure - 5 - 7bar; -max. weight of upper die - 400kg; -die height - 220mm; -ram (front to back) - 500mm; -air consumption - 15m3 / min; -anvil weight - 24 t; -height of machine above floor - 3750mm; -total machine's height - 4380mm; -total weight - 35t;

Condition: ready for operation (used), Year of construction: 1991, A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible. Hfodpfx Aozrhhwsdwjk

Condition: excellent (used), Year of construction: 1978, functionality: fully functional, overall weight: 64,000 kg, workpiece weight (max.): 18 kg, 1. Forging hammer HUTA ZIGMUNT type MPM 2000A Energy of blow: 7 000 kgm Ram weight: 2 380 kg. Max. ram stroke: 950 mm Number of strokes per minute: 100 Total weight: 62.5 ton Anvil weight: 45 ton 2. Trimming press SMERAL type LKO 315 Nominal force 315 ton Stroke 180 mm Shut height 530 mm Ram adjustment 115 mm Number of strokes per minute 30 Main table size 1 250 x 800 mm Distance between columns 1300 mm Sizes L x B x H: 2600 x 1750 x 4600 mm Electric output 25 kW Total weight 17 000 kg 3. Inductive heatinfg device AEG ELOTHERM 400 kW A numbers of different inductors are available in the set. Hedpfx Adelnllbswsfk

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Total press force: 16,000 kN Force application point before the PMI: 18 mm Number of strokes adjustable continuously in automatic mode: 10 - 22 1/min Slide stroke: 605 mm Slide adjustment: 400 mm Mold height (stroke downwards, adjustment upwards): 1300 mm Table dimensions: 4500 × 2300 mm Hfsdpfszldwuex Adwsk Slide dimensions: 4500 × 2300 mm Table height from the ground: 600 mm Table stroke: T-Track Transfer stroke: 0 - 1200 mm Internal clearance of the guide shoulder for the clamping pins (min.): 800 mm Internal clearance of the guide shoulder for the clamping pins (max.): 2400 mm Lifting stroke: 0 - 280 mm Cushions in the base (hydraulic): 2 pcs. Positioning of both cushions: Motorized and adjustable Cushion force: 300 - 2000 kN Cushion stroke: 0 - 250 mm Cushion surface area: 1600 × 950 mm Pneumatic cushion in the slide: 2 pcs. Cushion force in the slide: 55 - 550 kN Maximum cushion stroke in the slide: 150 mm Left slide cushion surface area: 1450 × 1600 mm Right slide cushion surface area: 1300 × 1600 mm Maximum weight of the upper part of the mold: 36,000 kg Maximum total weight of the mold: 40,000 kg Technical data for the CISAM line: • Strip width: 300 - 1600 mm • Strip thickness: 0.5 - 3.0 mm • Tensile strength: 600 MPa • Yield strength: 400 MPa • Feed rate: 200 - 1300 mm • Feed accuracy: ±0.1 mm • Maximum feed cross-section: 4,000 mm² • Strip entry height above the table: 500 - 800 mm • Maximum coil weight: 25,000 kg • Coil outer diameter: 900 - 1,855 mm • Mandrel expansion range: 500 - 610 mm • Nominal coil inner diameter: 610 mm • Straightening rollers: 9 pcs. • Straightening unit with cassette construction

Condition: excellent (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, input frequency: 50 Hz, pressing force: 4 t, stroke length: 1,200 mm, oil tank capacity: 700 l, total height: 7,480 mm, overall weight: 78,500 kg, year of last overhaul: 2023, Equipment: documentation/manual, Oil-hydraulic forging hammer Lasco type KH 400 YOM 1980 Fully retrofitted and modernized 2023. Work impact: 4,000 mkg Fall height in normal dies: 1,200 mm Ram weight: 3,350 kg Length between the guiding light: 725 mm Ram: 620 mm Motor power: 60 kW Weight of the anvil: 44,000 kg Hodpfozh Nchex Adwsfk Total weight of the hammer: 78,500 kg Total height of the hammer: 7,480 mm Building height above floor level: 6,260 mm Oil tank capacity: 700 liters Piston rod Length: 500*2800 mm Rubber cushions: 90/2900*120 mm Operating voltage: 380 Volts Control voltage: 220 Volts Slowly ON: 0.62 m/min.

Condition: excellent (used), Year of construction: 1978, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 24, overall weight: 1,40,000 kg, Hot forging hammer 5 ton Kramatorsk type M2147 Hodpfx Adolnlq Dswjfk Nominal weight of dropping parts: 5000 kg Actual mass of dropping parts without upper die: 5080 kg Energy of blow: 12 500 kgm /125 kJ/ Max. number of strokes per minute: 50 Ram stroke: 1300 mm Min. distance ram – die holder: 400 mm Distance between columns: 800 mm Die length: 950 mm Die holder length: 1180 mm Dimensions /L x B x H/: 3000 x 2000 x 6470 mm Bottom anvil weight: 23 t Upper anvil weight: 77 t Total weight 140 t

Condition: excellent (used), Year of construction: 1985, functionality: fully functional, pressing force: 4,000 t, 5. Forging hammer SMERAL type KJH 4 Hfjdpfx Aewbginjdwok Weight of the ram, kg: 1’800 Ram impact rated energy, kgm: 4’000 Number of ram strokes,1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Lenght of the machine, mm: 3’100 Widht of the machine, mm: 1’900 Height of the machine, mm: 3’900 Weight of the machine, kg: 27’000

Condition: ready for operation (used), Year of construction: 1976, functionality: fully functional, hydraulic forging hammer (H5) Manufacturer: BECHE Type: KGH 31.5 Year of manufacture: 1976 Hfodpfx Ajziw N Esdwek Energy: 31.5 kJ Machine foundation with spring damping elements Forging furnace Gas-heated Power: 400 kW New Siemens S7 control system, refurbished

Condition: ready for operation (used), Year of construction: 1999, machine/vehicle number: 100.981.48, functionality: fully functional, hydraulic forging hammer (H1) Manufacturer: LASCO Hfedpfsziw Nxsx Adwsk Type: HO - U 400 SO Year of manufacture: 1999 Impact energy: 40 kJ Ram stroke: 710 mm Ram weight: 3,000 kg Machine foundation with spring damping elements, forging furnace, gas-heated, power output: 800 kW, underfire zone, pre- and main chamber burner, work platform

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling Hodpsziw Nlofx Adwefk

Condition: good (used), blacksmith vise, bottle vise, anvil vise, anvil, blacksmith's anvil, bench vise, locksmith's vise, parallel vise -Jaw width: 135 mm -Wingspan: 150 mm -Number: 8x vises available -Price: per piece -Dimensions: 450/160/H900 mm -Weight: 35 kg Hedpodl E Irefx Adwofk

Condition: refurbished (used), Automatic line for forging / hot stamping Installed after refurbishing in 2015 and having run for not more than 1,000 hours, condition is excellent. Hfodpjzcdluofx Adwjk ➢ ADIGE CM 500 AUTOMATIC SAW ➢ 50 KW INDUCTION OVEN ➢ ELECTRONIC AUTOMATION SYSTEM ➢ VACCARI SCREW PRESS 180 screw diameter ➢ 10-POINT AUTOMATIC LUBRICATION SYSTEM ➢ BALCONI 50T TRIMMING PRESS ADIGE CM 500 AUTOMATIC SAWING MACHINE WITH 3.5-METER AUTOMATIC BAR LOADER Technical specifications: -Min./max. cutting capacity: 8 mm / 60 mm diameter -Standard cutting speed: ADIGE SALA. -Head motor power: (50 Hz) 2.2 kW -End-of-bar scrap equal to or shorter than the usable piece -Central hydraulic tank capacity: 200 liters -Cutting emulsion tank capacity: 50 liters -Weight: approx. 1,200 kg -Siemens electrical components 50 kW INDUCTION OVEN WITH 1 INDUCTOR (8–20 mm) with ELECTRONIC LOADING ARM For horizontal and vertical loading of work pieces Features a brushless motor, programmable axes, and press interpolation with electric axes; electronic components: Siemens Load capacity: 4 kg; vertical stroke: 80 mm; power supply: Electro-pneumatic VACCARI SCREW PRESS 180 screw diameter Technical specifications: -Screw diameter: 180 mm -Theoretical pressure: 300 tons -Table dimensions: 430 x 550 mm -Slide dimensions: 500 x 650 mm -Ram stroke: 350 mm -Distance between uprights below the guides: 450 mm -Distance between uprights within the guides: 350 mm -Max. height between table and ram: 650 mm -Strokes per minute: 35 -Table height under the guides: 300 mm -Main motor: hp 30 -Machine dimensions: 4100 x 2600 x 2200 mm -Approximate weight: 11,000 kg NEW SIEMENS S7 ELECTRICAL SYSTEM NEW PNEUMATIC SYSTEM NEW LUBRICATION SYSTEM BALCONI 50T TRIMMING PRESS Technical specifications: -Power: 50 tons -Table dimensions: 800 x 500 mm -Ram dimensions: 440 x 380 mm -Max. die height: 400 mm -Adjustable stroke: 100 mm -Strokes per minute: 35–100 -Main motor power: 5.5 kW

Condition: used, Year of construction: 1980, pressure . t total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight); Dango and Dienenthal HSM 12 manipulators; Merz bogie-hearth furnace, hood-type furnace, etc.; wedge- ram spare parts, etc.; mechanical workshop; oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Hfodpfxozfwt Ae Adwsk We look forward to your visit. Your Markus Hirsch Team

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Hfsdpfeq U R T Nex Adwek Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Hodpfoq U R Ruox Adwefk Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Hedpfx Ajq U Sa Sedwsfk Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: ready for operation (used), Anvil & Stand Hjdezcqpyepfx Adwofk Length x Width x Height 1000x350x360 mm (dimensions of the anvil) Weight approx. 300 kg Errors and omissions excepted.

Condition: new, Year of construction: 2018, machine/vehicle number: DF0163, pressing force: 800 t, pressure:800 t distance between columns:1200 mm Hfjdpfjdxvfpjx Adwsk stroke:500 mm total power requirement:85 kW weight of the machine ca.:40 t dimensions:4100 x 3500 x 6650 mm draw back pressure:80 t Master cylinder:1 Stück column diameter:250 mm dayligth:1000 mm Table dimensions:1300 x 1100 mm ram surface:1300 x 1100 mm :800 mm table height over floor:950 mm table load:5 t pre-running speed:250 mm/sec return speed:150 mm/sec :1000 l :10 mm/sec :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen ? :inbegriffen (800 x 530mm) ? :inbegriffen (800 x 530mm) ?

Condition: used, Year of construction: 2019, Pressure total: 1000 ton Stroke: 170 mm Shut height (stroke down, adjustment up): 490 mm Slide adjustment: 16 mm Max. stroke rate: 32 s.p.m. Table surface area : 800x800 mm Ram surface: 825x860 mm Free frontal opening L-R: 900 mm Upper ejector stroke: 16 mm Upper ejector capacity: 10 ton Hfodpfxoywztge Adwjk Lower ejector stroke: 80 mm Lower ejector capacity: 32 ton Dimensions L x W x H: 2950x1950x4090 mm Machine weight: 26 kg Main drive: 33,5 kW Standard configuration PRESS :original mechanical parts all other components are European brands and standards (lubrication, electrical, pneumatic...) Extended machine accessories Full line ready to produce including : *New AMIDEC (France) 2 axis transfer arm, equipped with: 2 grippers for the handling of billets1 nozzle for cleaning and lubrication of forging tools *New Induction s.r.l. (Italy) heater 200kW designed to heat carbon steel billets diameter 24 to 75,5mm, length 22,1 to 33,1mm. 700 to 800°CScope of supply of the heating systemA/ M.F. Static converter model IHFT 200 K4B/ Frame for the M.F. capacitors and inductorsC/ automatic loading system for disc-shaped billets with reversible box- Tilting box- Storage conveyor- Vibrating bowl- Command and control cabinet- Steel support - Soundproof cabineD/ 1 system for the introduction of the billets to the inductor and 1 system for exit of the billets.E/ Inclined inductor length 1200mm with inox pipe F/ 1 automatic inductors exchange double version (for 2 inductors)G/ 1 optical pyrometer H/ 1 integrated dry supply transformerI/ PLC Siemens S1500 installed on the converterJ/ Cooling system  Tools

Year of construction: 1978, condition: excellent (used), FORGING HAMMER HUTA ZYGMUNT MPM 6300B Hfodeivqanspfx Adwsk