Used Form-Attic for sale (4,621)

Condition: excellent (used), Year of construction: 1999, operating hours: 80,188 h, machine/vehicle number: 322, Max. film width 700-800 mm Equipment / Additional information: -GREINER STACKING / Transfer device R3 (Ref. No.: 95002.24) // M. No.: 00020 // Age: 1998 Heating from above and below Material PS and PP were processed 450 Ps // 350 Pp The following tools were used on the machine: Ksdpoq Nn Hcsfx Abcsww 8-way WZ-Ø95 and 15-way WZ-Ø73 and 15-way WZ-Ø86 Packaging was produced especially for the dairy industry. The cycles are 18-25 strokes - depending on the cup weight.

Year of construction: 1988, condition: excellent (used), machine/vehicle number: 3284, (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Kwjdpfxehbu E Ho Abcow Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe reliable guarantee for precision. OPTIMUM PUNCHING ACCURACY EVEN DURING MAXIMUM OUTPUT Cam controlled function sequence guarantees absolute precision with every cycle.

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: 403, THERMO FORMING MACHINE TFT IMC 5030 (WITH TOOLS) Equipment / Additional information: unwinding: Roll recording: easy Max roll diameter: mm 1000 Settlement: automatically Thermoforming machine: Maximum tool dimensions: mm 520x330 Pos. Molding height max .: 15 mm Neg. Molding height max .: 120 mm Sheet width: mm 150/760 Movement Step: mm 50/330 Max HIPS film thickness: 1.8 mm Hub of the sub-table: 150 mm Clamping force: 7500 Kg Inst power top heater: 18.8 Kw Inst power under heater: 14.1 Kw Idle clock speed: per minute 40th power main drive motor: 2.2 Kw Engine power. Film feed: 0.75 Kw Air operating pressure: Kg / cm2 7 Water consumption at 12 °: 1t / 1` approx.30 Air consump. at 7 kg / cm2: 1t / cycle 125 Installed power: Kw 50 9xTool: Article no. // Tool no. // Cavities // Description / Product: 3599 // 457 // 10 // Vending machine cup capacity/capacity/contenance=223ml 593 // 460 // 8 // Coffee-to-go / thermo mug / thermo cup Filling capacity / Capacity / Contenance=300ml / 12 oz 509 // 452 // 6 // Ice cream cup: filled to the brim=140ml / Filling capacity with headspace 6mm: 120 ml 591 // 459 // 10 // Thermo mug ⌀ 81/180ml 740 // - // - // Standard cup with sealing edge ⌀ 75-120ml 3589 // 458 // 12 // Coffee-to-go / thermo mug / thermo cup: Filling capacity / Capacity / Contenance=80ml Kwodon D Ew Ijpfx Abcjw 595 // 456 // 10 // Vending cup / Gobelet pour automate: Filling capacity / Capacity / Contenance=150ml 210 // - // - // Baking case / technical part / plate or tray 8000 // 455 // - // Granule cup 180 ml / technical part with flat sealing edge

Condition: excellent (used), Year of construction: 1993, machine/vehicle number: 818S9145, (Sticks labels on sheets) Specifications: High accuracy :  0,25 mm;  0,009" at any speed, depending on label and paper materials High speed: up to 85m/min (270 fpm), in-line or off-line, depending on label paper materials and size Any label size : and any intermediate size, in increments of 1/6", 1/8" or 1/10" max 24" depth x 16" wide min 1/2" depth x 1/2" wide Any label shape: stars, figures, circles, angular shapes, etc… Label materials: self adhesive labels, piggybacks, flexible plastic cards, holograms, booklets, etc… Paper size: max 24" depth x 18" wide - min 3/6" depth x 2"6/8 wide Label waste diameter : max  8" Height paper pack: max  17" Height label pack: max  9,5" Folding depth : cascade folding Weight :  360 KG Electrical requirements: 220V or 110V or 100V, single phase, 50-60 Hz, 16A The machine worked together in production with CROSS AND Kwsdpfx Asxmitdsbcow LONGITUDINAL CUTTING MACHINE BÖWE 310 (5517) // Ref. No.: 31014.25

Condition: used, Consisting of: “Ishida” Multihead weigher Type CCW-M-214W-S/50-SS Heads: 14 pieces Performance: up to 2 x 30 weighing’s/min Filling weight (max. weight): 10.000 g Accuracy: Average value 0 to +3.0 g Weighing range: 5 - 10.000 g Max. volume: 12.500 cc (per individual weighing) Minimum division: 1g Display: Touch-screen display Power: 230V, 50Hz Connected load: 1,6 kW In good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14115 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + Vertical flowpackaging line “Rovema” Type VPK360 - 14116 yoc 2001 Performance (mechanical) cycles/min: 120 roll width / diameter (max.) (mm): 770/450 (770 / 600 with front rollers) bag width (min. – max.) (mm): 80-360 Bag length (min . – max.) (mm): 200-600 Filling volume (max.) (cm³): 12000 Seal pressure (max.) (N ): 6000 (optional: 8000) Program memory: Standard: 100 (optional: 1000) Dimensions: ( L x W x H) (mm): 2,435 x 1,680 x 2,015 mm Weight: 1,500 kg Kwodpfx Aeyqxxxsbcjw Mains connection (Volt): 230 / 400 Energy requirement (kVA): 8 Protection class: IP54 Compressed air connection: 6 bar Air consumption 6 bar (NI/cycle): 0.25 Machine color: Ral 9007L / gray aluminum Operating temperature (min. – max.) (°C) : +5 … + 45 Storage temperature (min. – max.) (°C): -30 … +60 Humidity (max. ) (%): 15…95; no condensation in good condition + carton box former – Packaging machine “Paal” Type ELLE 3000 S Working capacity: Max. 14 cycles / minute Infeed capacity: Max. 34 bags / minute Format1 : Tray with sleeve Filling material designation: Stand-up pouch 4.0 kg Filling material dimensions: Approx. 240 x 105 x 370 mm Filling weight: 4.0 kg Grouping scheme: 1 x 3 standing Packaging type: Tray with internal, glued-in cover and cover protection Dimensions: Inlet height of filling material: 650 mm Outlet height of package: 500 mm Installation area: approx. 8000 x 6500 mm Please refer to the installation plan for the main dimensions (photo attached) 3 x 400V, 50Hz, 5kW Packaging machine: Type: Elematic 3000 LS/335 in good condition

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net Weight : 3500 [kg] - Gross Weight : 4100 [kg] EQUIPMENT Kwsdpjuhb T Defx Abcsw - Tooling as per photo - Positive ejection on 2 punches - Ejector retraction in die - Various spare parts

Condition: used, TECHNICAL DETAILS - Parts per minute : 300 - Cutting diameter : 6 [mm] - Die ejection : 55 [mm] - Floor space (width) : .97 [m] - Floor space (length) : 2.77 [m] - Motor : 7.5 [hp/kW] - Net weight : 3500 [kg] - Gross weight : 4100 [kg] EQUIPMENT - Equipped with ejector recoil between rough part and finishing (RLKO) - Positive ejection (TKO) Kwsdpfx Abjuhb Twjcsw - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 450 - Cutting diameter : 4 [mm] - Die ejection : 25 [mm] - Floor space (width) : .74 [m] - Floor space (length) : 1.88 [m] - Motor : 4 [hp/kW] Kedpsuhb Tqsfx Abceww - Net Weight : 1600 [kg] - Gross Weight : 2100 [kg] EQUIPMENT - Tooling as per photo

Condition: used, TECHNICAL DETAILS - Parts per minute : 400 - Rivet length : 12 [mm] - Drilling depth (max.) : 5 [mm] - Cutting diameter : 3 [mm] Kedpfsuhb Tksx Abceww - Floor space (width) : 1.12 [m] - Floor space (length) : 2.21 [m] - Height : 1.77 [m] - Motor : 4 [hp/kW] - Net weight : 2,500 [kg] - Gross weight : 3,000 [kg] EQUIPMENT - Tooling as per photo

Condition: used, Year of construction: 2017, Diesinking / EDM Travel distance X: 600 mm Travel distance Y :400 mm Travel distance Z: 450 mm table size X: 750 mm Kedpfx Abjym Rr Noceww table size Y: 600 mm max. workpiece size X: 1040 mm max. workpiece size Y: 730 mm max. workpiece size Z: 410 mm max. electrode weight: 50 kg max. workpiece weight: 1600 kg generator: 64 Ampere cooler drop tank control Charmilles Charmilles control system High precision mold and tool machining Integrated EDM generator Dielectric system with cooling Suitable for tool and mold making

Condition: ready for operation (used), BTO 215 spring coiling machine + AB1 decoiler cap wire diameter: 0,4 1,5 mm winding diameter: max 45 mm max spring length: 100 mm max length of leg: 60 mm Kwodpfx Abjwrt T Ujcsw speed: 80 m/min power: min 3 kW / max 5,2 kW length: 1300 mm width: 900 mm height: 2000 mm weight: 700 kg

Condition: used, Tube forming mill OME 320x8mm (A3782) Tube forming mill OME 320x8mm (A3782) for tube production of 323mm maximum diameter and 8mm maximum wall thickness Make: Ome (Italy) Material: HR, CR, Galv Condition: New Tube Diameter: 168mm – 323mm Wall Thickness: 2mm – 8mm Direction: L-R Speed: 35 meters per minute FORMING MILL Pass N. 1 Driven Forming # 1 Pass N. 2 Driven Forming # 2 Pass N. 3 Driven Forming # 3 Pass N. 4 Driven Forming # 4 Pass N. 5 Driven Forming # 5 Pass N. 6 Driven Forming # 6 Pass N. 7 Side Idle Forming Pass N. 9 Driven Forming # 7 Pass N. 10 Side Idle Forming FIN-PASS SECTION, SINGLE POINT ADJUSTMENT Pass N. 11 Driven Fin Pass # 1 Pass N. 12 Side Idle Fin Pass Pass N. 13 Driven Fin Pass # 2 Pass N. 14 Side Idle Fin Pass Pass N. 15 Driven Fin Pass # 3 Pass N. 16 Driven Fin Pass # 4 SIZING SECTION Pass N. 26 Driven Sizing # 1 Pass N. 27 Driven Sizing # 2 Pass N. 28 Driven Sizing # 3 NDT Prueftechnik Pass N. 29 Driven Sizing # 4 Pass N. 30 Driven Sizing # 5 STRAIGHTENING AND SQUARING SECTION Pass N. 31 Idle Turkshead #1 Roll holder plates NOT available Kodpfx Aoq Ul Rvebcjww Pass N. 32 Idle Turkshead #2 Roll holder plates NOT available Pass N. 33 Idle Turkshead #3 Roll holder plates NOT available Pass N. 34 Idle Turkshead #4 Roll holder plates NOT available Tables and tools for rolls change ABB Motors Costamasnaga Reducers Centralized lubrication system Hydraulic Power Unit Complete Mill Portion Automation with diagrams (OTO MILLS/Elletre 2013) Complete hydralic system Fume and Vapors exhaust system with extraction hoods (EUROFILTER) Complete Zinc exhaust system (DONALDSON)

Condition: like new (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: 45802, Handtmann RF 440 round former with vacuum filler for the automatic production of dumplings and balls with homemade quality. Year of construction 2021 very little used condition like new! Ksdpfsyk U Ezjx Abcjww

Condition: used, Year of construction: 1993, voltage 220 V Kjdpfxeyk Ibio Abcsww collets 8mm Motor output 1,8 kW

Condition: used, Single column hydraulic press DUNKES type HZT 2,5 Machine No. H94-2558 Year of construction 1994 pressure force 2,5 ton. throat 180 mm table area 420 x 300 mm drop-through opening in table 60 x 185 mm ram surface Ø 40 mm Ksdoh Uhqyopfx Abcsww clamping spigot bore Ø 20 mm ram stroke 160 mm Installation height max. 250 mm Rapid traverse downward 65 mm/sec. Rapid traverse upwards 160 mm/sec. Working speed 8,3 mm/sec. Table height above floor 950 mm Hydraulic operating pressure 135 bar Tank capacity hydraulics approx. 100 liters Drive power 1,5 kW Mains connection 400 Volt, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and travel cut-off - 2-hand operation at the machine - stroke counter - safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion work) - 32047 read off operating hours - Electrical circuit diagram and hydraulic diagram available space requirement L x W x H 1100 x 980 x 1950 mm weight 700 kg very good condition

Condition: used, Single-column hydraulic press HYDRAP type HPSK 25 No. 6312 Year of construction 1989 Pressure force 25 ton. Ram stroke 500 mm throat depth 300 mm Installation height 700 mm Table surface 1000 x 500 mm Table bore Ø 210 mm Plunger surface 400 x 360 mm Clamping pin bore Ø 40 mm Table height above floor 855 mm Feed speed in rapid traverse 280 mm/sec. Pressing speed 3.5 mm/sec. to 25 mm/sec. Return speed 280 mm/sec. Hydraulic tank capacity 240 liters Drive power 7.5 kW Mains connection 400 Volt, 50 Hz. - Operation and programming via SIEMENS S5 with OP1 control system Kwsdpehrakvofx Abcsw - Measuring system for stroke adjustment - Pressing speed infinitely variable via potentiometer - Pressure setting infinitely adjustable manually via pressure regulator - Short stroke device - Mechanical tool clamping on ram with T-slots and clamping pin hole - Switch cabinet with electrical control on the machine - Two-hand operation and electrical connection for foot control - Control provided for electrical mold monitoring - Hydraulic diagram and electrical diagram available Space requirement L x W x H 1800 x 1200 x 2930 mm Weight approx. 4 tons good condition

Condition: used, Forklift forks, fork tines, forklift tines with anti-slip coating Load capacity: approx. 2.5 tons. Fork length: 1600 mm Fork width: 100 mm Kwsdpfohcgq Iex Abcew Tine thickness: 50 mm (40 mm metal + 10 mm rubber coating) Fork carriage height: 405 mm - Suitable for fork carriage: FEM 2 form B - Rubber coating as anti-slip coating and to protect transported goods - Tilt lever lock Own weight: 145 kg Mint condition, unused For a 2.5 ton. Forklift truck.

Condition: excellent (used), Milling machine for wood Make SAC type ts 80 4 milling spindles : Speed : 2900 - 4000- 5800 - 8000 n1/min Milling cutter stroke 150 mm Table 1000 x 800 mm 3 roller feed unit make ELU infinitely variable speed Motor 380 Volt 2800 n1/min. 11,3 Ampere 5,5 kw Transport dimension : L.1020 mm W. 800 mm H.1650 mm, with pallet Ksdjtyv Aajpfx Abceww Weight 470 kg

Condition: new, functionality: fully functional, The Table Top Print bagging machine enables efficient packaging and sealing of products in pre-made bags and is suitable for various formats. The machine is easy to operate and features a user-friendly display for setting up, saving jobs, and controlling operating parameters. For maximum flexibility, it offers automatic and manual operating modes with a secure sealing bar. Training a packaging operator takes less than five minutes. With integrated thermal transfer printing technology, bags can be directly printed with high-resolution graphics, text, and barcodes—eliminating the need for separate labeling. Features: - Multi-color display for straightforward settings - Pre-selection of desired product quantity for packaging - Integrated total product counter (with reset function) - Roll change in under one minute - Sealing via foot pedal, automatically, or manual push-button - Feed systems for automatic bag filling available on request Technical Parameters: 1. Maximum bag length: 450 mm Ksdpjxlzr Ajfx Abcoww 2. Maximum bag width: 250 mm 3. Maximum bag thickness: 0.04–0.1 mm per layer 4. Packaging speed: up to 25 units/minute 5. Supply voltage: 1Ph. 220V 50Hz 6. Power consumption: approx. 1 kW 7. Machine weight: approx. 70 kg (including printer) 8. Machine dimensions: approx. 670 x 665 x 860 mm 9. Print area: 53 x 75 mm 10. Bag type: wicketed bags on rolls Base machine: €12,500 + Thermal transfer printer: €5,500 + Label dispenser: €2,900 + SATO label printer incl. dispenser: €6,500 to €9,000

Condition: new, Year of construction: 2025, functionality: fully functional, warranty duration: 12 months, Our state-of-the-art VFFS packaging machine is a true all-rounder, specifically designed to optimally support companies that demand the highest quality standards. With exceptional build quality and a wide range of applications, our machine features intuitive operation that streamlines your packaging processes. The highly powerful motors and user-friendly color touchscreen control system provide maximum flexibility during format changes and significantly simplify your packaging operations. The machine is equipped with memory slots for storing machine parameter settings. For this packaging line, we also offer fully and semi-automatic infeed systems, including weighing solutions, which can be retrofitted according to your requirements. If you want to optimize your packaging processes with robust productivity and high quality, Impuls Packaging is your ideal partner. Machine features: Kodpfjwlgnrjx Abcsww 1. Single film unwind 2. Individually servo-driven sealing jaw 3. Three servo drive controllers 4. HMI control panel 5. Two independent temperature controllers 6. Housing made of stainless steel 304 7. Documentation in the local language 8. Registration mark control 9. Programmable bag length 10. Vertical product flow 11. One format set is included in the price. Technical parameters: 1. Product length: L50-290mm 2. Product width: W80-200mm 3. Packaging speed: up to 45 products/min (depending on product, bag length, and material) 4. Maximum film width: 420mm 5. Power supply: 1Ph. 220V 50Hz 6. Total power: approx. 3.9 kW 7. Machine weight: approx. 300 kg 8. Machine dimensions: approx. 1300x1170x1585mm Bag types: 1. Classic flow pack bag 2. Stand-up pouch (classic flow pack bag with side gusset – available as an optional extra)

Condition: new, Year of construction: 2026, warranty duration: 12 months, total height: 2,050 mm, total width: 1,350 mm, total length: 1,400 mm, overall weight: 580 kg, film width: 360 mm, product height (min.): 60 mm, product height (max.): 450 mm, product width (max.): 170 mm, product width (min.): 60 mm, filling weight (min.): 10 g, filling weight (max.): 200 g, air demand: 360 m³/h, Equipment: documentation/manual, The item is generally offered as project-based equipment or, depending on availability, as a demonstration machine. Manufacture bags in custom formats, fill them with your product, and seal them. Description - Excellent price-performance ratio - Easy to operate and clean - Low maintenance requirements - Made from rust-free stainless steel (1.4301) - Fully integrated control system within the packaging machine - Control via PLC with color touch display - Quick, tool-free format changeover - One format included - Technical documentation provided via regional partners Kwjdpfxeq Uld Ue Abcow Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.04mm to 0.15mm - Film width: 140-360mm - Bag size (LxW): 40-250mm x 50-170mm - Output rate: 15-40 bags/min (depending on unit) - Accuracy: ± 0.5 - 1.5g - Weighing range: 3 - 200g - Power consumption: 3.7kW / 230V / 50Hz - Air consumption: max. 360 l/min at 6 bar - Dimensions (LxWxH): 1400mm x 1320mm x 2050mm - Weight: 580kg

Condition: new, Year of construction: 2026, The item is generally offered as a project-based machine or, depending on availability, as a demonstration model. Produce pouches in the desired format, fill with product, and seal. Description - Excellent value for money Kjdshtrf Eopfx Abcoww - Simple operation and cleaning - Low maintenance requirements - Product-contact parts suitable for food (1.4301 stainless steel, NBR) - Control system fully integrated into the packaging machine - Operation via PLC, color touch display with intuitive user software - Fast, tool-free pouch format changeover - One flat pouch format included - Technical documentation provided by regional partners Technical Data - Intermittent heat sealing for heat-sealable films - Film thickness: 0.03 mm to 0.15 mm - Film width: 180–520 mm - Pouch size (L x W): 60–350 mm x 70–250 mm - Output: 15–40 pouches/min (depending on product) - Electrical supply: 3.2 kW / 230 V / 50 Hz - Compressed air consumption: 360 l/min at 6 bar - Dimensions (L x W x H): approx. 1700 mm x 1300 mm x 1850 mm - Weight: approx. 500 kg Options: - Additional format sets - Doypack modification - Printer units (thermal transfer, hot stamp, inkjet) - Height adjustment, etc.

Condition: excellent (used), Year of construction: 2004, (LIDS PRODUCTION) Machine consists of: -1x Roll-off block -Thermoformer Gabler Swing Ksdpoyh Hhyjfx Abceww -Stacking

Condition: used, Year of construction: 1999, type of input current: three-phase, compressed air connection: 7 bar, number of blades: 2, input voltage: 380 V, Equipment: documentation/manual, We offer this used Bosch PKS 3151 bag forming, filling and sealing machine, year of construction 1999. If you have any questions or need more information, feel free to send us a message or give us a call. Ksdpoyh I Eyofx Abcsww

Condition: excellent (used), Year of construction: 2021, The machine is in very good condition. Suitable for the packaging of nuts or beans. A multihead weigher is included. Kodpfx Ajykb Ehjbcsww