Used Funnel for sale (129)

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, New vehicle! Available for rent, purchase, or rent-to-own by agreement! 54 m³ Kempf grain tipping semi-trailer with sluice / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Model: SKM 36/3 AK – High-performance sluice tipper with 3 compartments * First registration: – (NEW) * Capacity: approx. 54 m³ (10.00 m long x 2.43 m wide x 2.20 m high) * Gross weight: 36,000 kg * Unladen weight: approx. 6,750 kg * Payload: approx. 29,250 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tyres: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with lift/lower function / rapid discharge * EBS Wabco * Kempf 400 high-performance steel sluice, throughput capacity 30–40 m³/h * 2 partition walls with 3 locking positions, sliding in overhead rails * Transverse auger installed at the end of the loading floor * Storage box for conveyor hoses on the right (hoses not included) * Combination door (swing + double-wing door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Doors 1/3 to 2/3 division * 1x grain shutter with funnel/dust sack * Fifth wheel height from 1,170 mm to 1,230 mm Ksdjwuyx Aspfx Abcedi * 1x approx. 4.00 m ladder * 1x water tank * 1x air connection, rear left * 2x toolboxes, 660x500x460 mm * 1x control box, rear right * Single wheel mudguards * Drop legs, aluminium * Operator platform at the front * Sliding tarpaulin with central locking * 3x tarpaulin support bows * Load manometer * Shovel and broom holder * Dual round LED three-chamber tail lights * 1x LED work light, left * 1x LED work light, right * 1x LED interior lighting with switch * Body finished in RAL 9007 grey aluminum, chassis RAL 9005, tarpaulin colour dust grey * Air tanks made of aluminum * 4 m aluminium ladder * Tyre pressure monitoring system * Access steps inside front bulkhead * Floor, 6 mm New vehicle! Rental option also available!

Condition: used, Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW Kedpfxjhg Rg Rs Abcsdi -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system -Filter system: Kdodpfx Abowrb I Hscei -Filter frame: 2190/1460/H2080 mm -Vibration motor: 0.25 kW -Funnel frame: 2235/1440/H2520 mm -Opening: Ø 390 mm / 500 x 220 mm -Individual components: see photos -Weight: 200 kg / 590 kg

Condition: good (used), Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Kodpfx Aew Hz T Sjbcsdi -Filter system: -Filter frame: 1400/1995/H2100 mm -Shaking motor: 0.25 kW -Funnel frame: 1400/1995/H2350 mm -Opening: Ø 500 mm / 500 x 220 mm -Individual components: see photos -Weight: 220 kg / 521 kg

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, 3 heads fill. Brand - Primodan. Type - D-1000 Volume - 100-850ml. Funnel liter - approx. 125liter. Stir in the funnel/tank. With clamps to prevent dripping. Kdsdpfx Abewbudmocoi On wheels. SJK.25

Condition: excellent (used), Year of construction: 2000, Dust extraction fan, extraction, dust blower, extraction system, dust blower, dust extraction device, separator, welding smoke filter, welding smoke extraction, smoke gas extraction fan, filter system, Cartridge dust extraction system Kdjdpsw Nhbmefx Abcji -Filter system -Filter frame: 2135/2135/H2030 mm -Vibration motor: 0.55 kW -Funnel frame: 2100/2130/H2330 mm -Discharge gear motor: 2.2 kW 8.7 rpm -Opening: Ø 250 mm / 250 x 220 mm -Individual components: see photos, without extraction fan -Weight: 320 kg / 890 kg

Condition: used, Year of construction: 2022, New exhibition machine! List price: 14,200.- 400V, 3Ph, 50Hz / 1.5 kW Complete in standard configuration with: - Fully automatic electronic control with impulse operation via foot pedal: Clamping-Drilling-Unclamping, electric automatic return of the drilling unit after reaching the preset drill depth - Automatic drill hole depth extension for end-grain drilling, eliminating the need to reset the drill depth when switching from flat to end-grain drilling (+10 mm, e.g., for dowel length 35 mm, flat drilling depth 14 mm, end drilling depth 24 mm) - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm) - Including 21 quick-change chucks (Ganner system) for easy tool changes - Simple swiveling of the drilling unit from 0° to 90°, assisted by gas cylinder - 1 clamp carrier, adjustable in Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm Complete stop system consisting of: - 1 stop ruler 1800 mm for shelf drilling (aluminum profile 40x40 mm) with 3 drop stops; quick-change system easily switchable from right to left stop side for mirror drilling of shelves in cabinet constructions; usable also for hole line drilling in the 32 mm system - End stops and position settings, as well as drilling height positioning via support table with mechanical digital display - End stops can be easily swiveled away for quick conversion from cabinet to frame and vice versa - Support arms for clamp carrier made for hole-line positioning up to max. 300 mm Ideal three-stage tooling system. 1 set of dowel drills: 5 carbide dowel drills Ø 8x77 mm, right / 4 carbide dowel drills Ø 8x77 mm, left Additional equipment: - Extraction funnel, dust-tested, Ø 120 mm - Set for line boring in the 32 mm system, complete with: 2 guides with scale and adapter for positions up to max. 300 mm; 2 pairs of stop cams for line boring at Y-positions 37 mm and e.g. 300 mm; 1 basic ruler 1000 mm (aluminum profile 40x40 mm); 1 setting gauge for line boring - 1 set of drills: 11 carbide hole-line drills Ø 5x57 mm, right; 10 carbide hole-line drills Ø 5x57 mm, left - Hydraulic brake cylinder - Clamping cylinder with holder, additional Kodpfxoqw Ek Is Abcedi Storage location:

Year of construction: 2001, condition: used, 1 station auger fillingmachine Make: Bouwpaco Type: Semi-automatic 1-head auger dosing machine Model: BPS37SA Capacity: 1.500 filling/hr, depends on volume and product Frame: Steel/ stainles steel Ksdpfx Abeg Du Thecjdi electric: 380 Volt – 50 Hz Dimensions L x W x H = 1.000 x 1.100 x 2.000 mm Features: electric steering with timer for adjustment filling volume pneumatic valve with food safe seal on filling nozzle to avoid dripping. product funnel with mixer as-is or adjusted to customer needs

Condition: used, Year of construction: 2008, without briquetting press Filter area 32 m² with funnel transition to container or connection to rotary valve Kdedpfxevxlqme Abcsi used, top condition, little used Brand Schuko Type Vacomat 300 Year of manufacture 2008 Clean air device / negative pressure GS dust-tested BIA-tested CE type-tested Motor 7.5 kW Connection diameter 300 mm Pressure pa. 3090 Air output 5800 m³/h Control Filter pressure monitor Extinguishing device powder extinguisher New price approx. 17,000.00 EUR Space requirement approx. 3600 x 1590 x 2550 mm / 4400 without funnel Storage location 97447 Gerolzhofen, free loading, unpacked Handed over in the current condition as viewed, without guarantee and warranty

Condition: new, Year of construction: 2025, GANNOMAT "MASTER 325" FRAME DOWEL AND MORTISE BORING MACHINE Specifically designed for staircase construction Complete in standard configuration according to price list 01/19/D, featuring: - Precision collet chuck for ER40 collets Ø 3-26 mm, incl. collets Ø 10 / 13 / 16 / 20 - Pole-switchable motor 1400/2800 rpm, 1.5 kW - Line laser with bracket - Boring unit, continuously rotatable from the front (65°-0°-65°) - Position setting via digital counter - Position adjustment for 2 levels, pneumatic (0-100 mm) - Maximum boring depth 200 mm - Precision indexing rail with 12 mm pitch with central detent and lateral adjustment 320 mm - Complete stop system consisting of: 1 center stop and 1 stop for oversized frames 1 stop rod, approx. 850 mm long (can be reversed from left to right) 2 flip stops - Mortising unit lowerable, with 2 program cams (400V, 3Ph, 50Hz, 1.5 kW) Extraction funnel, dust-tested, Ø 80 mm Double miter stop adjustable from 0°-60° Pneumatic clamping of the X-axis with on/off switch at the indexing handle Pair of auxiliary workpiece supports, swiveling (left and right) Clamp column re-positionable to the front Chassis with 4 wheels for easy machine movement 1 piece Collet extension Ø 20 mm, incl. collet for drill shank Ø 9 mm 1 piece Baluster drill bit Ø 25 mm, chrome steel, with centering tip Ksdpfxexdttpo Abcodi Available: at short notice

Condition: new, Year of construction: 2025, CNC-controlled drilling, gluing, and dowel insertion machine Complete in standard configuration with: - Support with linear guide consisting of: 1 pc. single-spindle horizontal drilling unit, motor 0.65 kW, stroke 70 mm Tool speed selectable via operator software (3000/5000/8000 rpm) 1 pc. blow-out, gluing, and dowel insertion station for dowels Ø 8 mm, dowel length 25–50 mm - Fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 700 mm, max. traversing speed 95 m/min - Z-axis manually adjustable via mechanical digital counter, position on support table 5–40 mm - Dowel insertion projection adjustable from 7–20 mm via mechanical digital counter, drilling depth 0–35 mm (with drill length TL 70 mm), automatically set with insertion projection - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER to flush glue system, each with: 1 stainless steel container for 7.5 kg glue and 7.5 l water - Indicator lamp for residual glue level in glue container - 1 pc. left side stop, 1 pc. right side stop (all removable) - 2 pcs. start buttons for individual operation with 1–2 workpieces - 2 pcs. pneumatic angled clamping cylinders 10° for workpiece thickness up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection Ø 80 mm - 1 pc. TCT controller with: Integrated industrial PC, incl. Beckhoff TwinCAT soft PLC, operating temperature range 0–50°C, 15" capacitive touchscreen TFT industrial display, operating system: WINDOWS 10 IoT LTSC (long term support channel) - Programming via menu-guided user software, drilling distances freely programmable with ABSOLUTE, RELATIVE, or GRID dimensioning, automatic workpiece mirroring and process optimization, 2 working fields assignable with different programs, graphical workpiece display, parametric programming, zero-point shift, programmable work lists, plain text error diagnosis - Integrated options: - Electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 pc. glue nozzle, art. no. 0470-0810 Kdsdpfew Sgm Hsx Abcsi - 1 EASY CLEAN system, for automatic test glue shots before starting the drilling/gluing/dowel insertion program. E.C.S. for 1 pc. glue nozzle, art. no. 0471-Z010 - 1 single-spindle vertical drilling unit from ABOVE, 0.65 kW, (3000/5000/8000 rpm), position (Y) manually adjusted via mechanical digital counter Adjustable from 5–40 mm, drilling depth (Z) max. 30 mm (with drill length TL 57 mm) Workpiece thickness (Z) max. 50 mm, workpiece length (Y) min. 130 mm (incl. drilling depth compensation, e.g., for Häfele Minifix) Art. No. 0471-0830 - 4 vertical angled clamping cylinders 10° with mount, additional, Art. no. 0470-0850 Available: short notice

Year of construction: 2022, condition: as good as new (ex-display), AL-KO grinding table AST 1.5 BASIC The AL-KO grinding table AST 1.5 BASIC is the entry-level model for the AL-KO grinding table program. He is certified according to GS-HO-11 and carries the seal of "Holzstaubgeprueft according to BGI 739-1" THEIR advantages accessible from 4 sides Take loads up to 150kg Manual, tool-free height adjustment with scale Contrasting sides for edge grinding Workpiece-friendly beech wood grid (removable) Funnel-shaped air Guide to the dust extraction spout TECHNICAL DATA LOAD 1.5 BASIC Intake 140 / 160 mm Kdedpfx Aedqzhbjbcei Required suction power 1.500 m ³/h Negative pressure at the connection at 22 m/s 1.000Pa in DN140mm 700Pa at DN160mm Working height adjustable from 735-1.015 mm Working surface (BxL) 946 x 1, 500 mm Dimensions (Wxl) 1, 000 x 1 600mm Weight 73 kg

Condition: used, This listing is for a Waters fraction Collector 111 chromatography system The unit is in full working condition and is ready for immediate release. The Waters Fraction Collector III is designed for flexible fraction collection in both HPLC and LC-MS workflows. Kdodpsxtbcqefx Abcoi It supports high flow rates, up to ~300 mL/min. It accommodates a wide variety of collection vessels/racks. For example: standard test-tube racks (13-18 mm O.D.), eppendorf tubes, scintillation vials, microtiter plates (4 × 96/384), and preparative funnel racks (4 × 32 positions). Multiple operational modes for fraction collection: time-based, volume, drop count, signal (e.g., detector threshold), peak mode (peak end time, request time, up to 10 out of 99 peaks) and window mode (start/end times) etc. The system is controllable either locally (via keypad + LCD) or remotely via software (e.g., Empower 3, MassLynx) for integration into automated purification workflows. Low nozzle-shift time (0.1 s between tube centers) helps minimise dead time between fractions. Diverter valve option: allows unwanted flow (e.g., column void, non-target peaks, excess solvent) to be diverted to waste, improving collection efficiency

Condition: refurbished (used), Year of construction: 2016, CLIPPER POLY CLIP FCA 80 2016 year After capital renovation Kdjdpfxovbfius Abcsi 3 months warranty for parts. For the 38 mm to 160 mm calibre range. All bearings, bushings and rollers new. New funnel with brake. Delivery time: 3 weeks. 15% prepayment.

Condition: new, Technical specification: Funnel opening: 600x800mm Funnel capacity: 0.6m³ Rotor working width: 600mm Rotor diameter: 252mm Drive power: 15kW Rotor speed: 90 rpm. Number of knives: 14 pieces + 2 pieces Type and size of knives: concave / 40x40 mm, Cutting crowns concave / 30x30mm, clearing knife Screen perforation: 15/20mm Kodpfevyp Avjx Abcjdi Paint: HoKu Tech Standard RAL5010/7016 Connection value: 400V +/- 5% / 50Hz Includes: Control cabinet with 5 m cable Electrical control (PLC Siemens) Star-delta start-up Rubber vibration elements E-rotor with knife pockets milled into the profile Gear limit switch 1st row of knives Holder on the slide for long and large parts Large 40x40mm knives for optimal material feed Very robust gearbox Special clearing knife to prevent jamming at the side

Condition: new, maximum load weight: 29,965 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,800 mm, Year of construction: 2025, Equipment: ABS, Brand new FD-Tec 3-axle tank semi-trailer * SV2011-22-R300 (Tank volume: 30 m³, material thickness: 3 mm stainless steel, temperature range: 0–60°C.) Kjdpfxowwn Abj Abcjdi * Former designation SV2006 Basic / Now SV2011 * 8" manual docking funnel * 6" gravity discharge connection * 4" manual cleaning line with 2 x 2.5" nozzles (1 at the front and 1 in the center of the tank) * ABS braking system by Wabco, no electronic air suspension * 9-ton VALX axles, Ø430 disc brake, ET120 * Automatic lift axle on the first axle * Raising/lowering via control from the EBS modulator * Start-up assistance: 2nd and 3rd axles can be loaded up to 130% under 30 km/h * Third axle is a self-steering axle * Apollo Vredestein 385/65R22.5 tires * 24-volt lighting system: 2 x LED work lights at the rear, 1 x on the left side * Work lights left and right by the first axle * Standard 15-pin connection + 2 x 7-pin connectors * Flashing side marker lights * Ball valve for drainage at the lowest point of the tank * Vogelsang pump, 6,000 L/min (Pump manufacturer recommends a leakage oil return line) * Automatic pump shut-off * 2 wheel chocks * Left and right (narrow and tall) galvanized steel hose trays, each 5 m (250 mm wide, 190 mm high) * Tension cables above the hose trays * Tire pressure monitoring system, air suspension with lift/lower valve, rotary slide valve * Tank painted with two coats of paint – Category A (without clear coat) * Tank painted in a single color RAL 7030, STONE GREY * Chassis painted in a single color RAL 7016, ANTHRACITE GREY * ...

Condition: new, overall weight: 34,000 kg, axle configuration: 3 axles, loading space length: 8,000 mm, loading space width: 2,200 mm, loading space volume: 30 m³, Equipment: ABS, Delivery time: available at short notice Weight from 5,960 kg Kässbohrer K.STN L 30 Slurry Tanker # Stainless Steel V2A Tanker Semi-Trailer 30m³ with 3 Baffle Plates # 1 x Filling Dome/Manhole DN 500 Kedpfsxynwusx Abcedi # Aluminum box frame # Wabco electronic braking system with EBS # BPW axles with disc brakes # Branded tires, 6 x 385/65 R 22.5 on aluminum rims # Self-steering trailing axle or Wabco Optiturn # 1st axle is a lift axle # Side underrun protection # Plastic toolbox in front of the first axle, right side # Tank pressure test and approval # Access ladder, platform, and safety railing according to UVV regulations # 2x wheel chocks with holders Equipment/Technology: # 1x Börger FL 1036 pump with aluminum housing or 1x Vogelsang VX 186-260 Q Light GL pump # 1 filling dome DN 500 # All slide gates with pneumatic piston rod actuation # Front fill level display with automatic shut-off # Rear fill level indicator in 6" plexiglass # 8" suction connection rear top, with sump and rubber funnel # Complete stainless steel pipework in 8"/6"/4" # 4" overflow pipe at top with flange starting point and ending at the lower side near the support structure with flange # 4" flushing line rear, starting with 6" square flange, welded directly into end plate, front at end plate with 180° bend # All controls housed in stainless steel cabinet, rear left or right # Overpressure and vacuum relief valves # 6 LED work lights # Including all hydraulic lines and hoses to tractor unit ---- Subject to errors, changes, and prior sale! Location: KTH-Trailer GmbH in Goch

Condition: used, Make : Inoxpa Usage : Powder Blending - Homogeniser Capacity : 5000 L/h Kodpfx Aexnx Dzjbcsdi Y.o.m 2016 Powder Inlet Funnel Product Inlet Pump Product Outlet pump for circulation Sample Valve Stainless steel skid mounted Condition : Excellent

Condition: new, functionality: fully functional, Drum Cooler CCn -120/70 for powder coatings Main unit, including Kedjw Snfdjpfx Abcedi • Cooling calender with stainless steel cover, steel belt and crusher unit • Additional edge sealing parts • Stainless steel mainframe, rails Akzo standard • Additional safety switch monitoring working position • Water collecting tank stainless steel • Airknife and rubber scraper • LEV taper in crusher housing top • LEV product outlet funnel • Sliding cover after calender • Lototo Switches with trapped key for crusher and calender hood • Software and Hardware integration of safety switch of safety inlet device incl. safety PLC extension. Safety switch from BBA Innova, all other hardware from customer side.

Condition: new, COMPONENT PARTS: 1.) Sand bunker 2mc: -Volumetric dosing with conveyor belt - 1.5 kW motor -Vibrator 0.18 kW - Gravel bunker 2 m2 -Volumetric dosing with conveyor belt - 1.5 kW motor 2.) Electric control panel: „ Start/stop mixer „ Start sand conveyor- the conveyor will stop after the preset time from the time relay " Start gravel conveyor - the conveyor will stop after the preset time from the time relay „ Water quantity setting (digital display) 3.) MIXER, MX500 / MX300: -The tub is lined with an interchangeable jacket made of hardox sheet 4mm; -Padded bottom with removable wear elements (10mm) - Interchangeable mixing hoes made of hardox sheet -Protective net MX500: -Useful volume: fluid concrete 500 liters -Precast concrete: 350 liters -Productivity: 3.5 cubic meters of semi-wet concrete/ hour -Engine power: 11 kW (380V) -Dimensions: 1.70 x 1.70 x 1.40 m - Mass: 900 kg MX300: -Useful volume: fluid concrete 300 liters Precast concrete: 200 liters -Productivity: 2.4 cubic meters of semi-wet concrete/hour - Engine power: 5.5 kW (380V) - Dimensions: 1.40 x 1.40 x 1.40 m - Mass: 650 kg OPTIONAL PARTS: 1.) WEIGHING CEMENT: -Steel funnel with pneumatic opening; -Compressor; -Pneumatic vibrator; -Load cell; - Digital weight indicator - mounted on the electrical control panel. -Auger for cement (connects to the bulk cement silo of the client or at the silo provided by our company) -Mixer cover for blocking cement dust 2.) CEMENT SILO -Capacity: 24 cubic meters (30 tons of cement) -The silo is equipped with a ladder, a railing on the lid and a supply pipe with a quick coupler. Kjdpfxjiz Dl Io Abcjdi -The silo is equipped with a filter, pressure release valve, level indicators, fluidizers and a butterfly valve on the discharge mouth. -Inner diameter 2500 mm; -The height of the cylindrical ferrule 4500 mm; -The height of the conical bottom 1700 mm; -Total height, including railing 8700 mm. - Net mass: approximately 3000 kg. THE MACHINERY ARE NEW. The warranty period for the machines is 12 months from delivery.

Condition: like new (used), Ribbon mixer 1,800 liters Hopper volume: 1,800 liters Mixing capacity: approx. 1,000 kg 2 separate reduction gears with electric motors Kdsdpfexp Nugsx Abcji Loading platform with steps made of stainless steel Column loading device for standard 200-liter bins – optional 2 mixing shafts with parallel ribbons 2 hydraulic exhaust openings of the funnel Dimensions in cm (L x W x H): 265 x 360 x 305 Installed power: 18.0 kW Voltage: 400 V, 50Hz

Condition: excellent (used), Year of construction: 2017, Pellet production line ANDRITZ PALADIN 2,5 t/h Year - 2017 , Only Press 2012 Working hours - 6.600 Exellent condition !! 1. Hydraulick - Electro crane for feeding logs 2. Logs Debarker 3. Wood chepar - 65 x 115 cm - 315 Kw electro motor 4. Hydraulic floor - New (additional field) 2 x fields 8x2m. 5. Input Lateral Transporter (606x606) Drive: hydraulic drive 5,5kW, 4hydrocilinders. Serves for raw material feed and up to 50 ° (chop and sawdust) up to 30m in length. For the towel element, Gal's transport chain is used, with hardwood slats attached to it, and the name of the flywheel carrier. It consists of a zipper, angle, flat and drive module. Drive: Hellicocentric 7.5 kW gearshift gear, class IE2. 6. Input silos Hydraulic drive 5,5kW, 2 hydrocilinders. 7. Double screw feeder Screw feeder ~4m with two screws. Used for feeding material into drying drum (through rotational valve). 8. Industry furnace – 2,5 MW (new burners, new generation). Zmaj 2,5MW is furnace designed specially for air heating in process industry. It uses exclusively pellet as fuel. It consists of 6 separate burners with automatic pellet feed. By burning pellet, furnace reaches preset temperature of air. Thermal power: 1.2MW. Volume of burner chamber: 3m3. Number of burners: 6. Power per burner: 200kW. Control: separate for each burner. Insulation: Tervol HTB 700 9. Hot air mixer Capacity: 48.000 m3/h. 10. Rotary drum dryer 3t/h Drive: 2 x 5,5kW. Capacity: 3t/h. 11. Pipelines 12. Cyclone separator 2900 Cyclon separator 2900 is part of air transport system used for separation of transporter fluid (air) from transported material (particles of sawdust). It is conected to SC fan – a drive element for air transport system. It's placed directly over the rotational valve and hammer mills. Delivered with support construction. 13. Rotational valve B (x6 small used, 2 new) Power: 3kW. Big sized rotor. 14. Hammermill 3t/h Hammers: S=10mm, HARDOX. Capacity: 3 t/h. 15. SC CB fan It consists of a chassis, a chassis, and a drive. The fan's inlet is connected with a single 1800 cyclone and the outlet with the Ø900 pipe funnel. Serves air transport from hammer mills. Capacity: 48.000m3/h. Drive: 55kW. 16. SC fan Capacity: 48.000m3/h. Drive: 50kW. 17. Cyclone1700 (x6) 18. Support construction for cyclone battery With maintenanace platform. 19. Screw feeder CB 20. PELLET PRESS ADNRITZ PALADIN 1600 ( 2 x 90 Kw ) Screw feeder beneath the cyclone battery ~5m. 21. Homogenizer – New. (new generation) Device for biomass homogenization. Provides autonomy for rest of the process. Drive: motor-reduktor 5kW. 22. Bucket elevator – Homogenizer Tranporting device for sawdust. INOX buckets, rubber belt. Drive: 3kW. 23. Preconditioner Konditioner without screw feeder. Directly influences quality of pellet and pellet press tool endurance. 24. Automatic Packing unit - 6t/h Kdjdpfx Abeq Rfhdecsi

Condition: new, maximum load weight: 32,965 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space volume: 30 m³, Year of construction: 2025, Equipment: ABS, New vehicle! Buy, rent, or rent with a purchase option by arrangement! 30m³ D-Tec V2A Slurry Tanker Trailer / Rear-Steering Axle / Lift Axle / NEW VEHICLE ---- * Manufacturer: D-Tec * Model: SV 2006 * NEW VEHICLE * Gross weight: 39,000 kg * Unladen weight (manufacturer specification): 6,035 kg * Payload: 32,965 kg * Axles: 3x Valx axles / 1st axle liftable / 3rd axle rear-steering / disc brakes / traction assist * Suspension: air suspension with raising & lowering facility * Tires: 385/65 R22.5 on steel rims * Color: Chassis RAL 9005 black, tank body RAL 7015 grey * Volume: 30m³ / Ø 2.20 m / single chamber * Wabco EBS * Vogelsang rotary lobe pump * Max. flow rate: 6,000 L/min * Swivel outlet at the rear * 8" docking funnel on top, sealable with a manual gate valve * Filling and venting with pneumatic shut-off valve including safety for all air-operated valves * 1" ball valve on pump right side * 4" flushing pipe with two 2.5" free-fall outlets (1x at the front and 1x in the center of the tank) * Automatic pump shutdown * Pneumatic control box at rear left * 1x foldable dome cover * 5 m hose racks left and right (galvanized steel) * Fill level indicator front left * Operating temperature 0-60 degrees Celsius * Side access ladder left * Empty load supports * Single mudguards * Saddle height 1,180 mm * 24V lighting system Kdsdpfx Asx Suxlobcsi * 2x LED work lights at rear * 2x LED work lights left and right German trailer!! German documents!! NEW VEHICLE!! New vehicle! Buy, rent, or rent with a purchase option by arrangement! Note on potential errors in the listing: Despite careful preparation of the ad, errors may occasionally occur in the text or information provided. We accept no liability for mistakes, changes, or prior sale. All details are provided without guarantee. Please contact us to verify details or clarify any questions.

Condition: good (used), Used chocolate machine SKU: 10372 Placed on a platform Material: Stainless steel Various containers with double coat, a funnel with double coat Kodsd Rnk Nspfx Abcedi Stainless steel control cabinet Pumps, piping A container approx. 200L with anchor agitator with wall abstinfers

Condition: used, Year of construction: 2010, total width: 2,080 mm, total height: 1,900 mm, total length: 2,440 mm, Briquette press; Höcker Polytechnik BrikStar C 3-19-L Ksdjxqdxcspfx Abcedi 4.3kW, 400V 25kg/h Funnel volume 3m³ Oil tank 50l Dimensions; 2015x2360x1300mm, 830kg - Year: 2010 - Documentation available: Yes - CE certificate present: No - Transport dimensions: 2440mm x 2080mm x 1900mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels