Used Ga 90 Vsd for sale (16,837)

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. Hfodezpbufjpfx Adwjk The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: new, For sale is a new, unused three-phase electric motor, LOHER ANGA-355LB-04A, with a power rating of 270 kW. The motor comes from warehouse stock (NOS – New Old Stock). It has never been installed or used. Its technical and visual condition is very good, with only minor signs of storage. Manufactured in Germany, it features a robust, industrial design. It is ideally suited for driving pumps, fans, compressors, crushers, conveyors, and other industrial machines. Technical specifications: Manufacturer: LOHER Hfodpfxjzn Awxe Adwek Model: ANGA-355LB-04A Power: 270 kW Rotational speed: 1490 rpm Frequency: 50 Hz Voltage: 400/690 V (Δ/Y) Voltage range: 380–420 V Δ / 655–725 V Y Power factor (cos φ): 0.85 Protection class: IP55 Insulation class: F Mounting design: IM B3 Standard: EN 60034 / IEC 38 Country of manufacture: Germany

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,898 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2006 | 5,898 MTH | LPG | Triplex 6,900 mm | Fork Positioner | New Tyres | Condition 5/5 ✅ Optional: 4,050 mm spreader beam. Hodpfxeztkc Tj Adwefk Ready for work. No compromises. 🚀 This COMBILIFT C4000 has been fully serviced both technically and cosmetically, presenting itself as like new ✨. Built for demanding environments, it delivers reliable, downtime-free operation. 💪 Key specifications: 📌 Load capacity: 4,000 kg 📌 Mast: Triplex 6,900 mm | Free lift: 2,350 mm 📌 Fork positioner: 1,360 mm | Forks: 1,200 mm 📌 Tyres: superelastic 100% 🛞 (Front 200/50-10 | Rear 27x10-12) 📌 Heated full cabin 🔥 📌 Weight: 6,700 kg | Load centre: 600 mm 📌 Dimensions: H 2,400 mm | L 2,400 mm | W 2,250 mm | Mast height: 3,200 mm ✅ Fully serviced and inspected | ✅ Ready for immediate operation Ideal for: 🏭 Narrow aisles | 📦 Long loads | 🪵 Timber/Steel/Tubes | 🌦 Indoor & outdoor FT LOGISTICS 🛠 Full technical inspection & refurbishment 🚚 Transport across Europe 💶 Leasing support | 📄 Invoice in EUR/PLN 🔧 After-sales service & warranty

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 2,446 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 400 mm, fuel type: gas, mast type: triplex, construction height: 2,350 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,200 mm, fork length: 800 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 16 X 7 X 10 1/2, rear tire type: superelastic tires (black), rear tire size: 23 X 10 - 12, overall weight: 7,200 kg, empty load weight: 4,700 kg, total height: 2,350 mm, total length: 1,900 mm, total width: 1,950 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, -- USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS -- 🔧 Years of Experience | 🛠 In-house Service & Paint Facility | 💼 Professional Consultation | 🚚 Own Transport Fleet | 🤝 After-Sales Support Are you seeking a forklift you can rely on? We are a reputable dealer of new and used forklifts, backed by many years of experience and tradition. We serve clients across Europe – from small enterprises to major international industrial sites. Our forklifts are not just machines – they are your assurance of smooth and dependable logistics. 🌟 Why choose us? ✅ Each forklift undergoes a thorough technical overhaul (inspection, testing, oil and filter replacement, refurbishment of key components) ✅ Optional full safety certification (UDT) upon request ✅ In-house paint shop and service workshop – forklifts finished to the highest technical and visual standards ✅ Europe-wide transport, handled by our own fleet and trained drivers ✅ Operator training upon delivery + full onsite functionality check at your location ✅ After-sales and technical support – we stand by our customers post-sale ✅ On-site viewing and testing of machines – you are always welcome! ✅ Hundreds of satisfied clients across Europe – join those who already trust us ✅ Financing available – we work with leading leasing companies ✅ Invoice available in EUR or PLN – at your preference 🚀 Currently available: COMBILIFT C2500 – 4-Way Compact Forklift ✅ Year of manufacture: 2012 ✅ Operating hours: 2,446 ✅ Fuel: LPG ✅ Lifting capacity: 2,500 kg ✅ Mast: Triplex – 4,900 mm ✅ Fork positioner 1200 mm | Telescopic forks 800 mm ✅ Superelastic tyres – 100% condition Hfedpfxeztkc Hj Adwok ✅ Technical condition: Excellent – fully serviced ✅ Visual condition: Clean, rust-free, ready to work ✅ Free lift: 1,500 mm 📐 Dimensions: Height: 2,350 mm Overall length: 1,900 mm Width: 1,950 mm Positioner width: 1,200 mm Overall height: 2,350 mm 🏭 Ideal for: Narrow aisle warehouses Wood, steel, and pipe industries Handling long loads Indoor and outdoor use ✨ FT Logistics – Quality you can rely on. Service you can trust.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 2,245 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: KUBOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, # 🚜 COMBILIFT CB3000 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK ✅ ## 🔧 FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE If you are looking for a forklift that will generate value from day one instead of incurring maintenance costs, this machine is the perfect solution. We offer a modern and fully prepared COMBILIFT CB3000 multidirectional forklift, professionally serviced, thoroughly inspected, and ready for immediate operation in warehouses, production facilities, timber yards, steel service centers, and logistics environments. --- ## ⭐ Key Benefits ✅ Fully serviced prior to sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,245 h ✅ Ready for immediate operation with no additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility available --- # 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB3000 📅 Year of Manufacture: 2023 🔢 Serial Number: 73868 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,245 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- # 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- # 🔩 FORKS 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- # 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- # 🛠️ EQUIPMENT ✅ Full enclosed cabin Hedpozrza Tofx Adwsfk ✅ Heating system ✅ Radio ✅ Hydraulic fork positioner ✅ Side shift ✅ Working lights ✅ Kubota LPG engine ✅ Multidirectional steering system ✅ Operator comfort package --- # 🏭 IDEAL FOR 🌲 Timber and wood processing industry 🪑 Furniture manufacturers 🏗️ Steel mills and steel service centers 🔩 Aluminium and PVC profile handling 📦 Handling of long loads ↔️ Narrow aisle operations 🏢 Indoor and outdoor applications --- # 🤝 WHY CHOOSE FT LOGISTICS? When purchasing from FT LOGISTICS, you are working with a company specialized exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a comprehensive technical inspection, full service, and operational testing before delivery. 🌍 With more than 100 machines available from stock, we supply customers throughout Europe, South America, Africa, Asia, and the Middle East. --- # 🚀 WE PROVIDE 🔧 Full service before delivery 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing and financing assistance 🚛 Transport organization 📄 Export documentation and customs support 🔩 After-sales service --- Hundreds of customers across Europe trust our equipment and continue to return for future purchases. 📹 We can arrange a live online demonstration. 📸 Additional photos and videos available upon request. 🚛 Customized transport quotation available for any destination worldwide. --- # FT LOGISTICS ### 🚜 We Deliver Machines Ready for Work.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, operating hours: 6,656 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,300 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,300 mm, fork carriage width: 1,360 mm, fork length: 850 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 2,400 mm, total length: 2,000 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, 🔹 COMBILIFT C4000 – 2004 – 6656 hours – LPG / GAS – TRIPLEX 6900 mm – CONDITION 5/5 Used & new forklifts with quality guarantee – FT LOGISTICS ⚙️ Ready for operation. No compromises. The COMBILIFT C4000 stands for reliable, efficient material handling. Fully serviced and refurbished – like new, immediately ready for work 💪 🔧 Key technical details: • Year: 2004 | Hours: 6656 | Drive: LPG / GAS Hedpfxozrzaaj Adwofk • Capacity: 4000 kg | Mast: Triplex 6900 mm | Free lift: 2300 mm • Forks: 850 mm | Fork positioner: 1360 mm • Tyres: Superelastic (100%) – Front: 200/50-10 | Rear: 27x10-12 • Dimensions (mm): H2400 | L2000 | W2250 | Overall height: 3300 • Condition: 5/5 – fully serviced, corrosion-free, like new 🏭 Ideal for: ✅ Narrow aisle warehouses ✅ Wood, steel & tube industries ✅ Long load handling ✅ Indoor & outdoor use 💼 Why FT LOGISTICS? For years, we've supplied reliable forklifts throughout Europe 🌍 – from small businesses to leading industrial companies. We don't just sell machines – we deliver trust and peace of mind. Our advantages: ✅ Complete inspection & servicing ✅ UDT/CE safety check upon request ✅ In-house paint & service workshops ✅ EU-wide transport with our own fleet 🚛 ✅ Operator briefing & functional testing ✅ Customer service & warranty ✅ Fast financing – also for start-ups ✅ Invoice in EUR or PLN 💶 ✅ Hundreds of satisfied customers 💯 🤝 FT LOGISTICS – Quality we stand behind. Service you can rely on.

Condition: used, functionality: fully functional, machine/vehicle number: 2193, mileage: 4,08,500 km, power: 287 kW (390.21 HP), first registration: 11/2006, fuel type: diesel, empty load weight: 15,810 kg, overall weight: 26,000 kg, tire size: 315/80/22.5, tire condition: 50 %, axle configuration: 6x6, wheelbase: 3,900 mm, next inspection (TÜV): 11/2026, fuel: diesel, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2006, Equipment: ABS, EBS, additional headlights, air conditioning, car registration, crane, cruise control, differential lock, electric window regulation, hydraulics, low noise, non-smoking vehicle, onboard computer, parking heater, power assisted steering, power mirror, seat heater, tachograph, trailer coupling, truck registration, 6x6 tipper truck with Meiller Bordmatic and Palfinger crane PK 12001, snowplow, side plow, and spreader attachment, manual transmission, fully leaf-sprung, German-made vehicle. Sale only to business customers, and with exclusion of any warranty. We deliver to any German seaport. Hfsdpfxezuvr Ao Adwok

Condition: used, Year of construction: 2015, operating hours: 7,656 h, Equipment: all wheel drive, CAT 908M wheel loader, manufactured in 2015, with folding bucket and forks! Hfodpfx Adszuu Atjwsk ----* Manufacturer: CAT * Model: 908M * Year of manufacture: 2015 * Recorded operating hours: approx. 7,656 * Includes hydraulic quick coupler, folding bucket and pallet forks * German machine, first owner * Last service at approx. 7,500 operating hours! * More photos and video available upon request (WhatsApp Erik) * Price: 24,900 Euros, net + 19% VAT. ----For further questions, please call: Erik Kortum: WhatsApp All information is provided without guarantee. Errors and prior sale are reserved.

Condition: excellent (used), Year of construction: 2018, operating hours: 43,309 h, functionality: fully functional, Screw compressor Atlas Copco GA75VSD+FF Inverter and dryer integrated 75 kW Hsdpfezp Urwex Adwefk 12.75 bar 15.50 m3/min Year of manufacture: 2018 Operating hours: 43,309

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,275 h, load capacity: 4,000 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 24,000 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: all wheel drive, cabin, lighting, pallet forks, 🔧 Looking for a reliable forklift? We are industry specialists! We specialize in selling high-quality forklifts, offering well-maintained machines in excellent condition. Check out our offer and find the perfect equipment for your business! 💼🔍 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 4900 mm – Year 2010 – GAS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 The forklift is in excellent technical condition, ready for immediate use. ✅ 📊 Key features & technical data: Model: COMBILIFT C4000 Year of manufacture: 05/2010 Hfsdpjzrg D Dsfx Adwok Load capacity: 4000 kg ⚖️ Mast type: Triplex Lifting height: 4900 mm ⬆️ Drive type: GAS ⛽ Load center: 600 mm Engine: G.M. Power: 74 HP Total weight: 5800 kg Free lift: 1500 mm Tires: Solid, Superelastic, in good condition Front: 200/50-10 – 100% tread Rear: 27/10-12 – 90% tread Overall height (mast lowered): 2400 mm Technical condition: Fully functional, after full service 🛠️ Visual condition: Very good 👍 Fork length: 1200 mm Total height: 2400 mm Total length: 2300 mm Total width: 2200 mm Fork positioner width: 1320 mm 🛠️ Equipment: Work lights 💡 Adjustable boom Pallet forks 🏗️ Cabin operator Freelift Fork side shift ↔️ This forklift is ideal for industries that require efficient handling of long loads in tight spaces, such as the wood, steel, or pipe industry. Thanks to its multi-directional movement system, it ensures easy maneuvering and optimal use of warehouse space. ✨Additional features: Integrated multi-directional control system 🔄 Comfortable operator cabin 🪟 High reliability under intensive use Perfect for indoor and outdoor operation 🌦️ ✅ Condition: Fully functional, regularly serviced, and ready for work. 🚚 We offer transport across all of Europe and include a FREE initial inspection with the forklift. 💶 Price & financing options: We offer full support with financing: Invoicing available in EUR or PLN 💱 Leasing options, including Start-Up programs for new companies We are an authorized supplier for most major leasing companies Leasing decision within 2 hours! ⏳ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: ready for operation (used), Year of construction: 2008, A screw compressor Atlas Copco with integrated refrigerated dryer including a 500l compressed air receiver is offered. Motor power: 22kW (30hp), Volume flow: 3.84m³/min (64l/s), max. operating pressure: 12.8bar, Operating hours: 29897h, Refrigerant dryer: R134a, 0.95kg. The compressor was serviced annually without interruption by a qualified specialist company. Documentation available. Inspection possible by appointment. Hsdpfx Adszh Nizewefk

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 6,686 h, load capacity: 3,000 kg, lifting height: 4,900 mm, free lift: 1,320 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: GM, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,070 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 22x10x16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, adjustable boom, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT CB3000 – 2011 | 6686 hours | GAS | TRIPLEX 4900 mm 🚀 Ready to work from day one – no investment, no risk ✅ Why choose this forklift? Looking for a machine that won’t hold up your production? This COMBILIFT CB3000 is a tested unit following comprehensive servicing – just hop in and get to work. No hidden costs. ✔ 🔧 fully serviced (oil, filters, complete inspection) ✔ ✨ technical and visual condition: like new ✔ ⏱ only 6686 operating hours – genuinely low usage ✔ 🛞 new tyres – no additional investment required ✅ Key specifications ⚖️ Capacity: 3,000 kg ⛽ Drive: GAS 📏 Mast: Triplex – 4,900 mm 🔄 Fork positioner: 1,400 mm 📦 Forks: 1,070 mm 🪟 Cabin: open / front and overhead glass ✅ Complete technical specification Basic data: 📅 Year of manufacture: 2011 ⏱ Operating hours: 6,686 ⚖️ Capacity: 3,000 kg 📍 Load center: 600 mm ⚙️ Machine weight: 6,500 kg Mast & lifting: 📏 Mast type: Triplex ⬆️ Lifting height: 4,900 mm 🔓 Free lift: 1,320 mm Forks & attachments: 🔄 Fork positioner: 1,400 mm 📦 Forks: 1,070 mm Dimensions: 📐 Height: 2,250 mm 📐 Length: 1,550 mm Hjdjzq R Iwjpfx Adwofk 📐 Width: 1,500 mm 📐 Overall height: 2,250 mm Chassis: 🛞 Tyres: superelastic (100%) – new Front: 16x7x10 1/2 Rear: 22x10x16 Equipment: 🪟 Open cabin 🔄 Sideshift 🔧 Fork positioner 🔓 Free lift Condition: ✅ Technical: 5/5 – fully serviced ✨ Visual: refurbished, like new, no corrosion ✅ Ideal for: ✔ 🏭 narrow aisle warehouses ✔ 🪵 timber, steel, and pipe industries ✔ 📦 handling long loads ✔ 🌦 indoor and outdoor operations ✅ What you are really buying You are not buying a 'used forklift.' You are acquiring a fully prepared, ready-to-work machine: ✔ 🔍 each unit fully tested before sale ✔ 🚀 ready for immediate deployment ✔ 💻 live online demonstration available ✔ 🚛 direct delivery to your business ✅ Delivery & support 🚛 Europe-wide transport 📦 Complete logistics support 💰 Leasing / financing options 🤝 After-sales support ✅ Why FT LOGISTICS? We deliver forklifts that work – not forklifts that need servicing. ✔ 📊 over 100 machines in stock ✔ 🔧 in-house servicing and preparation ✔ 🌍 experience across Europe ✔ ⭐ hundreds of satisfied clients

Condition: used, empty load weight: 6,075 kg, maximum load weight: 28,925 kg, overall weight: 35,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 435/50 R19,5, color: red, Year of construction: 2023, Equipment: ABS, Color: RAL 3002 Carmine Red Front/rear panel: Purple / white Extension ladder at the rear, door latch on the side Support wedges with holder, aluminum side impact protection, galvanized steel underride protection, quarter panel fenders in front of the 1st axle and behind each axle, with anti-spray flaps behind each axle, rear impact protection, Pallet stop on both sides, approximately 15-20 mm high, in a bolted design, loading height is reduced by approximately 15-20 mm, plastic toolbox Axles + Suspension SAF disc brake axles, "axle/chassis laser measured" to reduce tire wear and fuel consumption, air suspension, 1st axle automatic lift axle, including forced lowering and starting assistance, Activation via "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Axle lift below the recommended ride height, therefore no warranty for tire damage Braking system 2-line compressed air braking system, color-coded lines for easy servicing, spring brake parking brake, 2 fail-safe coupling heads in front, without connecting line, EBS, electronic braking system with EBS socket in front, without connecting cable. Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Ride height in conjunction with lift axle, when the lift axle is raised, the loading or overall height increases by 50 mm (in Mega Flex only at low ride height or saddle height), vehicle - driving stability system Wheels and tires 435/50 R19.5", manufacturer's choice, steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the side, 2 white position lights in front 2 white/red marker lights at the rear, 2 x 7-pole and 1 x 15-pole fail-safe sockets in front Floor Sieve-printed panels approximately 30 mm thick, on longitudinal supports for high point load capacity for forklift axle load up to max. 7100 kg Front wall / corner posts Hedpszun I Aefx Adwefk 2,580 mm high, corner posts steel in volume design, release device for side tarpaulin on front wall, "Crash-Blocker," bottom inside at approximately 140 mm height with steel impact protection Intermediate supports 3 pairs of sliding supports, fully adjustable in length, with 4-fold insertion pockets and a long pocket at the bottom, 3 pairs of support positions Insertion slats 5 rows of wooden insertion slats Rear wall / corner posts Corner posts at the rear, steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-wing with 2 internal rotary rod locks each Tarpaulin Tarpaulin, with welded-in horizontal and vertical straps Tensioning closures made of stainless steel Roof Fliegl sliding roof, sliding cover, end lift at the rear that can be folded up, with a cover that can be slid from back to front, L-shaped roof beam for the automotive industry, inner width between the roof beams approximately 2,490 mm, tarpaulin color: white, roof non-elastic, little deflection of the roof beam during loading and unloading, EcoLift - lifting roof can be raised by approximately 380 mm, on both sides, with gas spring support, 3 driving positions in the front: interior height in the front approximately 2900mm/ 2950 mm / 3000 mm Optimal rain strip at the rear, on top of the end rail, above the doors Fliegl manufacturer certificate for body strength according to EN 12642 XL, Fliegl manufacturer certificate for body strength accor

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902029406, empty load weight: 5,800 kg, maximum load weight: 29,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2021, next inspection (TÜV): 06/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, loading space height: 2,790 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22.5", color: silver, Chassis / Haulage Semi-Trailer Fine-grain steel welded construction, lightweight design. Fifth wheel plate with replaceable 2" kingpin. Coil well approx. 8,040 mm long. 6 coil supports (coil pockets, inner dimension 82 x 52 mm). Coil cover with screen-printed panels and steel sub-beams. 2x split coil-well covers, each approx. 293 mm wide, weight approx. 13 kg per cover. Outer frame slightly angled with "Load-Lock" profile for strap attachment. Note: when side boards are fitted, they must be opened to attach the straps. 9 pairs of lashing rings, 5t each, recessed in the coil well area. 24t 2-speed landing legs, single-side operation, straight foot, without shock compensation. Note: rear swing clearance (without legs) approx. 1,930 mm. Pull-out ladder at rear. Side door retainers. 2 wheel chocks with holder. Aluminum side underrun protection, with cross- and longitudinal-beam mounted brackets for aluminum slats. Aluminum rear underrun protection. Half-shell mudguards with EC-compliant anti-spray flaps. Rear bumper/impact protection. 1 plastic tool box. 2 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm inner dimension, positions 1 & 2 per old Fliegl stake data sheet (as AU 19219). 2 additional stake pockets recessed centrally in the floor, approx. 72 x 42 mm inner dimension, positions 1 & 2 per old Fliegl stake data sheet (as AU 192198). Note: stake pockets/plug-in stakes are not designed to secure long materials, pipes, etc. on their own, without additional lashing. Axles & Suspension Hsdpfx Adjwhp A Djwsfk SAF disc brake axles, 430 mm disc diameter. Axles/chassis laser-aligned to reduce tire wear and fuel consumption. Staggered axle spacing 1,410/1,310 mm (combined transport) up to 44t gross combination weight. Air suspension. No lift axle. Please note: Photos are archive images — the actual vehicle may still be in use / show signs of use.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 5,458 h, load capacity: 300 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 60 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,050 mm, fork width: 1,200 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16X7X10 1/2, rear tire type: cushion tires (black), rear tire size: 22X10X16, overall weight: 9,500 kg, empty load weight: 6,500 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, all wheel drive, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT C3000CB – GAS / TRIPLEX 4900 mm / FORK POSITIONER / SIDE SHIFT / FULL CABIN / EXCELLENT CONDITION 🔧 4-WAY / MULTIDIRECTIONAL FORKLIFT Used Forklifts with Certified Quality – FT LOGISTICS ✅ The Combilift C3000CB is a compact, powerful four-way multidirectional forklift – fully serviced and ready for work. Ideal for timber, steel, and pipe industries, or warehouses with narrow aisles. Combines strong LPG performance, precision control, and operator comfort. ⚙️ SPECIFICATION Hfsdezqgu Hspfx Adwsk • Year: 2012 | Hours: 5,458 | Power: LPG / Gas ⛽ • Capacity: 3,000 kg | Mast: Triplex 4,900 mm | Free Lift: 1,380 mm • Fork Positioner: 1,380 mm | Forks: 1,050 mm | Side Shift: ✔️ • Full Cabin 🚜 | Superelastic Tyres 100% 🛞 • Condition: Excellent – after major service | Refurbished & corrosion-free 📏 H: 2,250 mm | L: 1,550 mm | W: 1,500 mm | Positioner: 1,380 mm 💪 WHY FT LOGISTICS ✅ 10+ years of experience ✅ Full technical inspection – filters, oils, hydraulics replaced ✅ Own paint & service workshop – top finish ✅ Transport across Europe 🚛 ✅ Operator training & testing on delivery ✅ Financing | Invoice in EUR or PLN ✅ Reliable after-sales support 🏭 Ideal for: Warehouses • Timber • Steel • Pipe industries • Long-load handling FT LOGISTICS – Reliable machines, proven quality, ready for work! 💯

Condition: excellent (used), functionality: fully functional, Year of construction: 2022, operating hours: 2,039 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,380 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA 4Y, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16 x 7 x 10½, rear tire type: cushion tires (black), rear tire size: 23 x 10 x 16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: green, Equipment: CE marking, all wheel drive, cabin, head guard, lighting, pallet forks, sideshift, 🚜 COMBILIFT CB2500 | LPG | 4900 MM | FORK POSITIONER | SIDE SHIFT | FULL CABIN | READY FOR WORK 🚜 ✅ FULLY SERVICED MACHINE | 🛡️ WARRANTY | 🌍 WORLDWIDE DELIVERY AVAILABLE Looking for a forklift that generates value from day one, rather than incurring maintenance costs? This COMBILIFT CB2500 is the perfect solution. Professionally serviced, thoroughly inspected, and ready for immediate operation, this multidirectional forklift is ideal for warehouses, production facilities, timber yards, steel service centers, and logistics operations. ## ⭐ KEY BENEFITS ✅ Fully serviced before sale ✅ Start-up warranty included ✅ Excellent technical and cosmetic condition ✅ Low operating hours – only 2,039 h ✅ Ready for immediate operation ✅ No additional investment required ✅ Live online demonstration available ✅ Direct delivery to your facility --- ## 📋 TECHNICAL DATA 🏭 Manufacturer: COMBILIFT 🚜 Model: CB2500 📅 Year: 2022 ⚖️ Capacity: 2,500 kg 📏 Load Center: 600 mm ⛽ Engine: Kubota LPG Gas ⚙️ Engine Power: 42 kW 🕒 Operating Hours: 2,039 h ⬆️ Lift Height: 4,900 mm 🏋️ Machine Weight: 6,300 kg --- ## 📐 DIMENSIONS 📏 Overall Height: 2,250 mm 📏 Construction Height: 2,250 mm 📏 Overall Length: 1,550 mm 📏 Overall Width: 1,550 mm 📏 Fork Positioner Width: 1,400 mm --- ## 🔩 FORKS Hedpfxozqfg Uo Adwsfk 📌 Fork Length: 1,200 mm 📌 Fork Section: 120 x 50 mm --- ## 🛞 TIRES Front: 16 x 7 x 10½ Rear: 23 x 10 x 16 --- ## 🛠️ EQUIPMENT ✅ Full enclosed cabin 🔥 Heating system 📻 Radio ↔️ Hydraulic fork positioner ↔️ Side shift 💡 Working lights ⛽ LPG engine 🔄 Multidirectional steering system 👨‍🔧 Operator comfort package --- ## 🏭 IDEAL FOR 🌲 Timber & wood processing 🪑 Furniture manufacturing 🏗️ Steel mills & service centers 🔩 Aluminum & PVC profiles 📦 Long load handling ↔️ Narrow aisle operations 🏢 Indoor & outdoor applications --- ## 🤝 WHY CHOOSE FT LOGISTICS? FT LOGISTICS specializes exclusively in: ✅ Sideloaders ✅ Multidirectional forklifts ✅ Long-load handling equipment ✅ Specialist material handling solutions Every machine undergoes a complete technical inspection, servicing, and operational testing before delivery. 🌍 100+ machines available in stock 🚛 Deliveries throughout Europe, South America, Africa, Asia, and the Middle East. ### 🚀 WE PROVIDE 🔧 Full pre-delivery service 🛡️ Warranty 👨‍🔧 Professional technical support 💰 Leasing & financing assistance 🚛 Transport organization 📄 Export & customs documentation 🔩 After-sales service Hundreds of customers across Europe trust FT LOGISTICS and continue to return for future purchases. 📹 Live online demonstration available 📸 Additional photos & videos on request 🚛 Customized transport quotation worldwide ### FT LOGISTICS 🚜 WE DELIVER MACHINES READY FOR WORK 🚜

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, operating hours: 1,363 h, load capacity: 2,500 kg, lifting height: 4,900 mm, free lift: 1,320 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,250 mm, motor manufacturer: TOYOTA, gearing type: hydrostat, fork carriage width: 1,400 mm, fork length: 1,050 mm, fork width: 125 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 16x7x10 1/2, rear tire type: cushion tires (black), rear tire size: 22x10x16, overall weight: 8,800 kg, empty load weight: 6,300 kg, total height: 2,250 mm, total length: 1,550 mm, total width: 1,500 mm, color: yellow, Equipment: CE marking, adjustable boom, all wheel drive, fork extension, front guard, head guard, lighting, pallet forks, sideshift, COMBILIFT CB2500 – 2019 | 1363 hours | GAS | TRIPLEX 4900 mm 🚀 Ready to work from day one – no investment, no risk --- ### 🔍 Why this forklift? Looking for a machine that keeps your production moving? This COMBILIFT CB2500 is fully serviced and work-ready: ✔ Complete maintenance (oils, filters, full inspection) ✔ Condition: like new ✔ Only 1363 hours – minimal use ✔ New tyres – zero extra costs --- ### ⚙️ Key specifications * Lifting capacity: 2,500 kg * Power: GAS * Mast: Triplex, 4,900 mm lift height * Fork positioner: 1,400 mm * Forks: 1,050 mm * Cabin: open --- ### 📊 Technical details * Year: 2019 * Load center: 600 mm * Machine weight: 6,300 kg Mast: Triplex / 4900 mm / free lift 1320 mm Tyres: Superelastic (new) Front: 16x7x10 1/2 | Rear: 22x10x16 Features: Sideshift, fork positioner, free lift Condition: ✔ Technical: 5/5 – fully serviced ✔ Visual: like new, corrosion-free --- ### 🎯 Best suited for ✔ Narrow aisles ✔ Long loads (steel, timber) ✔ Indoor and outdoor operation --- ### 💡 Your benefits ✔ Ready-to-use equipment ✔ Fully tested before delivery ✔ Online video demonstration ✔ Delivery to your premises --- ### 🚚 Delivery ✔ Europe-wide transport ✔ Financing support available --- Hfedpfx Adezqbmqewjk ### 🏆 Why FT LOGISTICS? ✔ Over 100 machines in stock ✔ In-house service and preparation ✔ Proven experience across Europe 👉 Live video presentation on request --- FT LOGISTICS – Quality you can trust

Condition: excellent (used), Year of construction: 2013, operating hours: 72,688 h, functionality: fully functional, Atlas Copco GA45VSDFF screw compressor Inverter and dryer integrated. 45 kW 12.75 bar 8.67 m3/min Year of manufacture: 2013 Hfsdpfxoznlx Sj Adwek Operating hours: 72,688 h

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 75 kg, Pad printing machine Hsdpfsywx H Dsx Adwofk

Condition: used, Year of construction: 2006, functionality: fully functional, overall weight: 75 kg, Pad printing machine Hfodpfeywx Dpox Adwok

Condition: used, color: other, first registration: 08/2009, Year of construction: 2008, Serial number: 27.59.616.482 We have a stock of >100 axles. Hjdezukqaopfx Adwsfk Please contact us if you can't find what you are looking for.

Condition: excellent (used), mileage: 3,73,417 km, power: 287 kW (390.21 HP), first registration: 04/2006, fuel type: diesel, tire condition: 50 %, axle configuration: 8x4, wheelbase: 5,700 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, total length: 8,200 mm, total width: 2,550 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 8,000 kg, permissible axle load (axle 3): 9,500 kg, Year of construction: 2006, Equipment: ABS, differential lock, electric window regulation, trailer coupling, = Additional options and accessories = - Power take-off (PTO) - PTO - Rear view camera - Speed limiter - Sun visor Hsdjzuc E Nopfx Adwsfk = More information = Technical information Number of cylinders: 6 Engine capacity: 10.518 cc Axle configuration Tyre profile: 50% Front axle 1: Max. axle load: 8000 kg Front axle 2: Max. axle load: 8000 kg Rear axle 1: Max. axle load: 9500 kg; Suspension: leaf suspension Rear axle 2: Max. axle load: 9500 kg; Suspension: leaf suspension Weights Empty weight: 13.725 kg Carrying capacity: 21.375 kg GVW: 35.000 kg Max. towing weight: 50.000 kg Maintenance APK (MOT): tested until 01/2027 Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request Identification Registration number: BT-JZ-11 = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Year of construction: 2001, PROD. ATLAS COPCO TYPE GA180VSD S/N AIF072891 YEAR 2001 POWER (kW) 181 OUTPUT (m3/min) PRESSURE (bar) 12.50 HOURS (RUNNING/TOTAL) 85719 VARIABLE FREQUENCY DRIVE yes BUILT-IN DRYER no HEAT EXCHANGER no COOLED BY (AIR/WATER) air WITH TANK no DOCUMENTS no Hedpfx Ajzq An Nedwsfk CONNECTION 2 1/2 NEW/USED USED

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 3,275 h, load capacity: 4,000 kg, lifting height: 4,900 mm, free lift: 1,500 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 2,400 mm, motor manufacturer: G.M., gearing type: hydrostat, battery capacity: 100 Ah, fork carriage width: 1,320 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: superelastic tires (black), front tire size: 200/50-10, rear tire type: superelastic tires (black), rear tire size: 27/10-12, overall weight: 9,800 kg, empty load weight: 5,800 kg, total height: 24,000 mm, total length: 2,300 mm, total width: 2,200 mm, color: green, Equipment: all wheel drive, cabin, lighting, pallet forks, 🔧 Looking for a reliable forklift? We are industry specialists! We specialize in selling high-quality forklifts, offering well-maintained machines in excellent condition. Check out our offer and find the perfect equipment for your business! 💼🔍 🚜 In this listing we present: COMBILIFT C4000 – TRIPLEX 4900 mm – Year 2010 – GAS – FREE LIFT – FORK SIDE SHIFT – CONDITION 5/5 The forklift is in excellent technical condition, ready for immediate use. ✅ 📊 Key features & technical data: Model: COMBILIFT C4000 Year of manufacture: 05/2010 Load capacity: 4000 kg ⚖️ Mast type: Triplex Lifting height: 4900 mm ⬆️ Drive type: GAS ⛽ Load center: 600 mm Engine: G.M. Power: 74 HP Total weight: 5800 kg Free lift: 1500 mm Tires: Solid, Superelastic, in good condition Front: 200/50-10 – 100% tread Rear: 27/10-12 – 90% tread Overall height (mast lowered): 2400 mm Technical condition: Fully functional, after full service 🛠️ Visual condition: Very good 👍 Fork length: 1200 mm Total height: 2400 mm Total length: 2300 mm Total width: 2200 mm Fork positioner width: 1320 mm 🛠️ Equipment: Work lights 💡 Adjustable boom Pallet forks 🏗️ Cabin operator Freelift Fork side shift ↔️ This forklift is ideal for industries that require efficient handling of long loads in tight spaces, such as the wood, steel, or pipe industry. Thanks to its multi-directional movement system, it ensures easy maneuvering and optimal use of warehouse space. ✨Additional features: Integrated multi-directional control system 🔄 Comfortable operator cabin 🪟 High reliability under intensive use Perfect for indoor and outdoor operation 🌦️ ✅ Condition: Fully functional, regularly serviced, and ready for work. 🚚 We offer transport across all of Europe and include a FREE initial inspection with the forklift. 💶 Price & financing options: Hfodpozpiapefx Adwek We offer full support with financing: Invoicing available in EUR or PLN 💱 Leasing options, including Start-Up programs for new companies We are an authorized supplier for most major leasing companies Leasing decision within 2 hours! ⏳ FAST / SIMPLE / AFFORDABLE FINANCING

Condition: excellent (used), functionality: fully functional, Year of construction: 2006, operating hours: 5,898 h, load capacity: 4,000 kg, lifting height: 6,900 mm, free lift: 2,350 mm, load center: 600 mm, fuel type: gas, mast type: triplex, construction height: 3,200 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 1,360 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,700 kg, empty load weight: 6,700 kg, total height: 2,400 mm, total length: 2,400 mm, total width: 2,250 mm, color: green, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, COMBILIFT C4000 | 2006 | 5,898 MTH | LPG | Triplex 6,900 mm | Fork Positioner | New Tyres | Condition 5/5 ✅ Optional: 4,050 mm spreader beam. Ready for work. No compromises. 🚀 This COMBILIFT C4000 has been fully serviced both technically and cosmetically, presenting itself as like new ✨. Built for demanding environments, it delivers reliable, downtime-free operation. 💪 Key specifications: 📌 Load capacity: 4,000 kg 📌 Mast: Triplex 6,900 mm | Free lift: 2,350 mm 📌 Fork positioner: 1,360 mm | Forks: 1,200 mm 📌 Tyres: superelastic 100% 🛞 (Front 200/50-10 | Rear 27x10-12) 📌 Heated full cabin 🔥 Hfedpfxozphx Ro Adwok 📌 Weight: 6,700 kg | Load centre: 600 mm 📌 Dimensions: H 2,400 mm | L 2,400 mm | W 2,250 mm | Mast height: 3,200 mm ✅ Fully serviced and inspected | ✅ Ready for immediate operation Ideal for: 🏭 Narrow aisles | 📦 Long loads | 🪵 Timber/Steel/Tubes | 🌦 Indoor & outdoor FT LOGISTICS 🛠 Full technical inspection & refurbishment 🚚 Transport across Europe 💶 Leasing support | 📄 Invoice in EUR/PLN 🔧 After-sales service & warranty