Used Galion T 500 for sale (45,078)

Year of construction: 1980, condition: good (used), indoor crane, crane, electric wire rope hoist, manual trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, crane undercarriage, trolley, carrier undercarriage, overhead track undercarriage -Manufacturer: Balkancar, crane chassis type T 10232 with electric cable hoist -Cable hoist: load capacity 0.5 t Chjdpfx Absvyzinjzed -Hook path: 12.0 m -Dmensions: see photos -Lifting speed: 8 m/min -Travel speed 20 m/min -Transport dimensions: 830/550/H860 mm -Weight: 142 kg

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic horizontal bending and straightening press - Fabrikat Zopf - Model T 500 with straightening equipment - Multiprogramming of 99 programs each 16 steps - hydraulic pressure 50 to. - length of stroke 300 mm - bending speed adjustable Csdpfxjdk H A Io Abzjhd - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 300 mm - motorcapacity 5,5 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 1300 kg - bending capacity: flat material max. 300x15 mm round tube 3/8" - 2 1/2"

Condition: new, functionality: fully functional, power: 367.75 kW (500.00 HP), fuel type: diesel, color: white, axle configuration: 8x4, fuel: diesel, wheelbase: 4,250 mm, gearing type: automatic, emission class: euro6, Equipment: ABS, 🇬🇧Iveco T-Way 500 Equipment CIFA RY 1300 ADVANCE concrete mixer • Anti-wear protection for 25x8 mm propellers • Two manholes • Rolling rollers diam. 250 mm with balance support • Central reduction gear • Water tank, capacity 1200 | + 80 litre oil tank • W a t e r • Quick water connection on both sides • Concrete consistency detection pressure gauge • Double electro-hydraulic controls (one push-button panel in the truck cabin and one rear, removable, with 3 m of cable) • Two additional chute sections, with fixing supports on the subframe • Four-start, edged propellers at the unloading point • Wear-resistant plates on the loading hopper and unloading chute • Unit completely sandblasted and protected with anti-rust primer • Water pump and chute lifting cylinder, hydraulically operated by the distributor • Heat exchanger • Approved folding rear underrun protection bar • Emergency Start/Stop buttons for the vehicle engine Optional • No. 2 additional chute sections > EKOS CAP Cedpfx Asv Apf Njbzehd - POSSIBILITY OF CUSTOM FINANCING OR LEASING ON SITE. FROM 24 UP TO A MAXIMUM OF 96 INSTALLMENTS 0 DOWN PAYMENT TEL. -0823 1686306 -335 6713062 -377 7064530 OFFICE OPENING HOURS: MONDAY-FRIDAY 8:30/19:00 SATURDAY 08:30/14:00 WE OFFER A WIDE CHOICE OF USED MULTI-BRAND COMMERCIAL/INDUSTRIAL VEHICLES (FIAT-HYUNDAI-DAF-MERCEDES BENZ-RENAULT-PEUGEOT-IVECO-MITSUBISHI-SCANIA sway S-WAY -5500-V8-650-580-730-s500-S 500-S500Stralis-MAN-NISSAN v8-Intarder- 770s-limited edition-660 S semi-trailer-refrigerated semi-trailer - Lamberet-schmitz ISUZU-FIXED BODY-CRANE-TIPPING-TARPAD-BOX-TAIL LOADER-COLD BOX-INSULATED WITH FRIDGE - VAN

Condition: used, Year of construction: 1997, Folding machine MBO T 500/4 Year: 1997 Description: Chsdpshqin Nsfx Abzed - 4 page folder Feeder - Flat pile feeder - Counter Buckle folding unit MBO T 500 - 1 - 500/4 - First buckle folding section with 4 buckle plates - Maximum infeed width: 500 mm - Perforating shaft - Anti noise hood(s) Delivery - Stream delivery A 56

Condition: used, Year of construction: 2016, machine/vehicle number: 4303, pressure:500 t passage width:2100 x 1500 mm stroke:1000 mm total power requirement:62 kW weight of the machine ca.:39 t dimensions:5100 x 2800 x 4040 mm return capacity:40 t Main cylinder:2 Stück column diameter:Hauptzylinder 360 mm Table dimensions:2100 x 1500 with T-Nute mm Ram size:2100 x 1500 mm table height over floor:850 mm pre-running speed:300 mm/sec return speed:300 (bei 20T Stößelgewicht) mm/sec Pressure Speed:200T = 28 mm/sec Oil Tank Capacity:ca. 1000 l Auxiliary cylinder:2 Stück column diameter:Hilfszylinder 120 mm Total size Table Tops:ca. 2750 x 1600 mm Total size of plunger plates:ca. 2750 x 1600 mm Pressure Speed:300T = 20 mm/sec Pressure Speed:500T = 6 mm/sec Retract force of the plunger:40 t Tension of the control chain:24 V voltage:400 V Frequency:50 Hz Axial piston pump (REXROTH/Bosch A4VSO125):290 lt/min Daylight Opening:1500 mm Hydraulic block:REXROTH pressure control:über PLC (Mindestdruck 50T) Cylinder:4 x ?90 x 70 mm stroke length max.:300 über PLC einstellbar mm Outejection speed forward:95 mm/sec. Outejection speed return:240 mm/sec. Codpfx Aedyynvobzjhd Capacity:4 x 15T bei 250 bar t Pressure setting:über Monitor von 50-500T t Pressure constant posture:0-900 sec Hydraulics tank:2000 l Siemens Control System:S7 300 Storage capacity:200 Programme Electronics from German manufacturers:SIEMENS/MÖLLER Tax desk:auf Schwenkarm Light sensors sick:1500 auf der Vorderseite mm

Year of construction: 2009, operating hours: 1,472 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: N°M11490, WIRE BELT BLASTING SYSTEM Manufacturer: OMSG Type: CWB 500/4 T Year of manufacture: 2009 Passage width: 500mm Passage height: 250mm Spinning wheel: 4 pieces Cjdpfxsvmwqns Abzehd Filter system: Yes Machine length: 6100mm Machine height: 4350mm Incl. operating instructions, documentation, etc. The system is assembled and ready for use. A viewing is possible by prior appointment. Price: on request EXW: dismantling and loading is carried out by the buyer

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm Cedjg R Tfuopfx Abzehd -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H315 mm -Weight: 111 kg

Condition: ready for operation (used), Year of construction: 2000, operating hours: 32,769 h, functionality: fully functional, machine/vehicle number: H/7529, pressing force: 500 t, table width: 2,400 mm, table length: 1,300 mm, stroke length: 800 mm, TECHNICAL DETAILS Press force: 500 t Table area: 2,400 x 1,300 mm Pedal area: 2,400 x 1,300 mm Stroke: 800 mm Max. stroke length: 830 mm Control system: Siemens S7-400 Installation height: 400 mm/min Working speed: 25 - 60 mm/s Closing speed: 500 mm/s Rapid traverse up: 450 mm/s Mold base area: min. 1,400 x 900 mm Mold base area: max. 2,300 x 1,200 mm Mold weight: max. 3,000 kg MACHINE DETAILS Weight: 83,000 kg Chsdpfx Aewa S R Isbzed Power: 255 kW Rated current: 435 A Voltage: 400 V Frequency: 50 Hz Hydraulic pressure: 255 bar Oil volume: 3700 l

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm Cedsg Si I Iopfx Abzjhd -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H310 mm -Weight: 86 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system Chsdpeg Si Ntsfx Abzed -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H320 mm -Weight: 121 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H335 mm Csdpfeg Si Nljx Abzjhd -Weight: 123 kg

Condition: good (used), Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate, pallet changer, pallet changing system -Clamping plate: with T-slots and clamping devices, comes from a CNC machining center -Width: 500 mm -Length: 400 mm -Groove width: 14 mm Chsdpfxjg Si Nps Abzod -Groove spacing: 65 mm -Dimensions: see technical drawing in the photos -Clamping devices: see photos -Dimensions total: 400/500/H190 mm -Weight: 87 kg

Condition: excellent (used), Year of construction: 2020, machine/vehicle number: 1044, ELEKTRO HUBWAGEN DEICHSEL 2500 kg very well preserved integrated loader ready for immediate use with TÜV 2024 Csdjdg T Ukopfx Abzjhd for questions just contact me many thanks in advance

Condition: good (used), functionality: fully functional, Year of construction: 2016, operating hours: 500 h, Bunker dosing belt by R&T Recycling Technik Year of manufacture: 2016 Capacity: 2.5 m³ Drive: 1.5 kW Frequency-controlled feed belt This system was integrated into a small pilot plant for approximately 3 months in 2016. The unit is in excellent condition and ready for operation. Chodpfexcuviox Abzod As shown in photo no. ..., this unit can be transported on a large tandem car trailer.

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Type: HLP 220V 500W -Length: 165mm -Diameter: 13mm -Price per piece Codpfx Abeb A Sdaszjhd -Number: 4x available -Weight: 0.2kg

Condition: used, Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Type: HLP 230V 500W -Length: 90mm Cjdpfjb A Sc Usx Abzehd -Diameter: 13mm -Price per piece -Number: 9x available -Weight: 0.2kg

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Chsdpfxexrzgao Abzod Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: good (used), Year of construction: 1995, machine/vehicle number: B 2575, Offer 23348 Cedpfx Aerkmaaebzehd Technical data: - max. load capacity 1500 kg - Flat plate diameter 850 mm - Distance from floor to center of rotation axis 800 mm - Rotation electr. infinitely variable 0.08 - 1.6 rpm - Right + left rotation - Welding current transmission approx. 700 A - Drive 400 V / 2.2 kW - Space requirement attached unit approx. W 850 x H 1450 x D 1000 mm - Space required for co-rotating unit W 850 x H 1450 x D 1000 mm - Weight driven unit approx. 550 kg - Weight of rotating unit approx. 400 kg

Condition: new, Year of construction: 2020, Cantilever rack NEW Data : - H : approx. 416 cm - D : approx. 137 cm - L : approx. 402 cm - Cantilever arms : approx. 120 cm - Axial dimension : 131 cm - NEW GOODS immediately from stock. - 500 kg load per arm - 2250 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 100 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 416 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - incl. all necessary connecting elements and screws. Codpfx Aboxrzb Dozjhd Why BLT cantilever racking ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright foot and upright back are welded together, providing additional safety and short assembly times, as the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 2578,00 € net + statutory value added tax. You will receive an invoice with VAT shown. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2012, condition: like new (used), functionality: unexamined, machine/vehicle number: D500-D4000-16-T600-CNC-T, BRAND NEW UNUSED MACHINE AVAILABLE IN SOUTHERN INDIA Codpsw Em R Tefx Abzohd

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 144465, overall weight: 2,025 kg, This is a KUKA 1500/3 T linear unit Chsdpfx Aju Ra N Esbzsd Hybrid slide for KRC4 Year of construction 2015 Total length: 4m

Year of construction: 2016, condition: used, functionality: fully functional, Item: AV-12315-16-Pressure tank 5000L Chjdpfx Asxpw E Tjbzed Vertical stainless steel pressure tanks – 2 units External dimensions: Diameter Ø 1850 mm, total height 4000 mm. Vertical, stainless steel pressure tanks - 2 pcs. Pressure: 2 bar. 60-degree conical bottom. Klopertop. Manhole at the lower part of the cylinder and on the top. CIP (Cleaning-In-Place). AISI 304.

Condition: used, mileage: 1,50,000 km, Year of construction: 2019, Serial number: YS2R6X2000553xxxx Please contact ATS Norway for more information Please provide reference number upon request: 18545 Specifications: EU-approved for delivery Model year: 2019 Mileage: Approx. 160,000 km Transmission: Automatic Tires: See pictures Emissions: Euro 6 Flatbed length: Approx. 630 cm Total length: 1,096 cm Width: 255 cm Wheelbase: 475/135 cm Towbar: Yes Reversing camera: Yes Stabilizing legs: Yes Drive: 6x2 Engine power: 500 hp Bullbar: Yes LED bar: Yes Toolbox: Yes Bed: Yes Radio/CD: Yes Climate/AC: Yes Chsdpfx Abovg Aivozsd Crane Specifications: Crane: Hiab 477E-7 Hipro from 2019 Certification: Delivered with new certification Outreach: 7+6 Jib: Yes Crane diagram: Yes Remote control: Yes Description: 2019 Scania R500 6x2 crane truck with a Hiab 47 t/m crane and 7+6 outreach, equipped with a jib. Both the truck and crane come with new certification. The flatbed length is 630 cm. Quick delivery available. Km: 150000 HK: 500 Technical approved: Yes EU-approved until: 26.09.2026 Own weight: 20374 Total Weight: 30000 Payload: 9551 Width: 255 Length: 1096 Euro: 6 Model: R500 Gearbox: Automatic

Condition: used, mileage: 1,70,503 km, power: 114 kW (155.00 HP), overall weight: 8,500 kg, fuel type: diesel, axle configuration: 2 axles, gearing type: mechanical, first registration: 06/1993, Equipment: ABS, crane, Well-maintained Unimog U1650 with a Palfinger PK 105 crane with 3x hydraulic extensions, 1x mechanical and a maximum working height of 15 meters and a 5th + 6th control circuit (e.g. for grabs, shovels) plus a cable winch on the crane. The vehicle is approved as a LOF. * Palfinger PK 10500 * 3x hydraulic extensions * Working height 15 m * Side extension * 2.50 m ? 3,940 kg * 4.30 m ? 2,250 kg * 6.10 m - 1,520 kg * 7.80 m - 1,140 kg * 9.60 m - 940 kg Cedpfowk T Ehex Abzehd * Mechanical extensions * 11.60 m ? 740 kg * Additional control circuit on the crane for rotary servo, gripper * 4x support * High seat and floor control * Wood grapple including 2 additional bowls for an additional charge * 3 seater * All-wheel drive with differential locks * Stainless steel exhaust system switchable * Trailer coupling * Reversing gear 8 F + 8 R gears * Air driver's seat * Additional hydraulics at the front * Additional hydraulics at the rear * Registration as a self-propelled work machine possible * Total mileage 170,503 km * Financing through our partner banks possible, we are happy to help you. We expressly reserve the right to sell the item prior to sale, as we also offer this item on other portals. Information about accessories is provided without guarantee. Subject to changes, prior sale or errors. We offer and strongly recommend an inspection and inspection so that the buyer does not have any false impressions about the condition and suitability. Inspections and inspections are possible at any time by appointment and are expressly desired.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Fuji Film LUXEL T-6500CTP S Thermal Platesetter (2017) – B2 Format Chjdpfx Absxm Td Hozsd Technical Details and Equipment List: A. CTP PLATESETTER – LUXEL T-6500CTP S ● Technology: Thermal CTP ● Year: 2017 ● Laser Head: 32-channel (S Version) ● Productivity (B2): Up to 21 plates/hour at 2400 dpi ● Max Plate Size: 830 x 660 mm ● Min Plate Size: 324 x 330 mm ● Imaging Area: 830 x 636 mm ● Plate Thickness: 0.15 – 0.30 mm ● Resolutions: 2400, 2438, 2540 dpi ● Power Supply: 200/240 V, 47/63 Hz, Single-phase 35 A / 5 kW ● Weight: 830 kg ● Dimensions (L x W x H): 1985 x 1315 x 1300 mm ● Condition: Used, in daily production. Available for immediate inspection and testing. B. RIP & SOFTWARE SYSTEM ● RIP Processor: FujiFilm XMF PROCESSOR V6 4UP BUNDLE ● Functionality: RIP for B2 format, standard screening, HR/LR output, ICC/DLP/CIP3 support ● License: XMF DONGLE ONLY security key included ● Computer: Dedicated PC for XMF Gateway C. PLATE PROCESSOR ● Model: FLH-Z 85CD ● Max Plate Width: 850 mm ● Min Plate Length: 285 mm ● Plate Thickness: 0.15 – 0.40 mm ● Developing Speed: 15 seconds (dip to nip) ● Developer Tank: 30 L ● Weight: 364 kg (dry) Commercial Information: ● Availability: Machine is active in production. Reason for sale is an upgrade to a larger format.