Used Gang Drilling Machine for sale (92,175)

Condition: used, Display unit Dedpfxev Ntb Uj Adkewc Condition: Like new Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: good (used), Year of construction: 1994, Transport dimension: Width: 1500 mm, Depth: 1500 mm, Max. Height: 1550 mm, Weight: approx. 220 kg. Dwjdpfom Rg Npsx Adkjc

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Dwodpfsur H I Nsx Adkoc Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: good (used), Machine number: 26798 TyP / Model: BS 40 AIII drilling capacity steel / cast iron: 50 / 60 mm spindle mounting: MK 5 Speeds: 32 to 1,400 rpm Feed rate: 0.11 to 1.73 mm/rev table: 780 x 650 mm clamping surface: 630 x 500 mm head height adjustment: 250 mm stroke: 280 mm footprint: 700 x 1.200 mm total power supply: 6,7 kW Dodpfx Aeiypmxedkowc accessories/equipment: thread cutting function, right-left run; autom. feed, separate control cabinet condition: good weight: 1,5 t dimensions: 780 x 1.200 x 2.700 mm

Condition: good (used), Year of construction: 1995, functionality: fully functional, throat depth: 2,000 mm, drilling capacity: 60 mm, spindle speed (max.): 1,450 rpm, spindle speed (min.): 29 rpm, Radial drilling machine Manufacturer: Elha Model: FRN-60 Arm length: 2000 mm Speed range: 29 - 1450 rpm Drilling capacity: Steel: 60 mm Cast iron: 80 mm Boring capacity: Steel: 100 mm Dsdpfx Adow Ax Aiokowc Cast iron: 120 mm Thread cutting: In steel: M60 In cast iron: M72 The machine is in 100% functional condition.

Condition: excellent (used), Year of construction: 2018, Radial Drilling Machine KNUTH R 40 V Year of manufacture: 2018 Very little used Clamping cube Digital depth display Technical Data: WORKING AREA Drilling capacity: 40 mm Tapping capacity, cast iron: M 40 Tapping capacity, steel: M 32 Max. drilling depth: 260 mm Machine table dimensions: 2050 mm x 920 mm x 180 mm Cube table dimensions: 620 mm x 450 mm x 450 mm Arm reach: 300 mm - 1300 mm Dodpfx Adexdw Ukekewc Distance spindle nose to table surface: 300 mm - 1200 mm Vertical arm travel: 640 mm Column diameter: 280 mm TRAVEL Horizontal travel of drilling head: 1000 mm MAIN SPINDLE Speed range: 54 rpm - 2150 rpm Spindle taper: 4 MT FEED Feeds: 0.1 mm/rev - 0.63 mm/rev DRIVE POWER Main drive motor power: 2.2 kW Lifting motor: 1.1 kW DIMENSIONS AND WEIGHT Dimensions (L x W x H): 2.07 m x 0.85 m x 2.43 m Weight: 2300 kg

Condition: used, Display unit Condition: Like new Dwsdpfx Adov Ntb Iokoc Included in delivery: Equipment case Device Operating instructions Bit This item is an unused display unit.

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Thrust 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm Dedpjxd Tt Ajfx Adkewc T-slots, number x width x distance 2 x 14 x 160 mm Distance spindle-table min./max. 140/670 mm Hand feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom push button (latching) for EMERGENCY STOP Reversing switch for clockwise and counterclockwise rotation Motor protection switch Stepless speed adjustment Digital speed display Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint: DD structural paint light gray RAL 7035, anthracite RAL 7016

Condition: new, Catalog number M0297 – For the production of customized furniture – Drilling horizontally, vertically, and at an angle in wood-based panels and solid wood – 1500 mm measuring frame – Set of spacers included – Brand new machine TECHNICAL SPECIFICATIONS Dwodsxbzkwopfx Adksc - Number of spindles: 23 - Distance between spindles: 32 mm - Total interaxial distance: 704 mm - Maximum tool diameter: 40 mm - Maximum drilling depth: 65 mm - Max. size of workpiece: 740x3000x200 mm - Working table height: 860 mm - Table dimensions: 949x350 mm - Drilling head inclination: 0–90° - 2 independent pneumatic cylinders - Spindle speed: 2,800 rpm - Motor: 1.5 kW - Working pressure: 6/8 bar - Dust extraction port diameter: 80 mm - Machine packaging dimensions: 1115 x 950 x 1050 mm - Frame packaging dimensions: 1500x120x60 mm - Net/Gross weight: 271 kg / 301 kg Net price: 29,900 PLN Net price: 7,050 EUR, depending on the exchange rate 4.25 EUR (Prices may be subject to change with significant fluctuations) PRODUCT FEATURES The Maggi MS 704 is a multi-spindle drilling machine designed for fast production of customized furniture. The MS 704 is a compact machine capable of handling the complete production process, from drilling cabinet bodies to assembling flip-down fronts and system drawers of any brand. This drill enables comprehensive execution of all required holes in any technology: cam fittings, dowels, connectors, pilot holes for runners, shelf supports, hinge cups, and mounting holes for slides and actuators. The working table width without removing the side stops is 740 mm, so you can drill oversized cabinet components with ease. The machine features a patented 1500 mm measuring frame, allowing work independently of the 32 mm system. This gives you the flexibility to process workpieces up to 3000 mm in length. A new concept in furniture component drilling allows for quick material processing without the need for retooling. The measuring frame is a fixed part of the machine. Contrary to conventional drilling machines, the main operational axis is perpendicular to the spindle head, not parallel. The MS 704 is additionally equipped with height adjustment for the pressure beam, allowing you to process material up to 200 mm thick. The clamps are powered by independent circuits and are equipped with valves enabling safe operation—one clamp can be switched off when working with smaller elements. The MS 704 comes standard with a drill bit magazine and a set of spacers for positioning elements along the axis parallel to the spindle head.

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Diameter pulleys Motor side: Spindle side: 38; 48; 66; 78 mm 90; 104; 120; 133 mm Motor speed: 800 rpm stroke: 100 mm throat: 300 mm Dwedeh Hrkispfx Adkoc table: 400 x 400 mm distance table - drill chuck max: 580 mm distance table - drill chuck min: 130 mm table: 400 x 400 mm footprint: 750 x 480 mm total power: 0,4 kW accessories/equipment: drill chuck Condition: good weight: 170 kg dimensions: 750 x 480 x 1.450 mm

Condition: used, total width: 600 mm, total length: 700 mm, total height: 700 mm, - Main motor power [kW]: 0.75 - Drills included: Yes - Tool wrenches included: Yes - Documentation available: No - Voltage [V]: 400 - Power [kW]: 0.8 - Transport dimensions: 700mm x 600mm x 700mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Dwjdpfx Adjw N Nq Aeksc Glenn Smeets

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Dwjdpfxovvi I Rs Adkjc

Condition: used, Line boring machine SCHEER DB 22 - used - ----- Technical data ----- Number of spindles: 2 x 21 pcs, Drill spindle spacing: 32 mm, Stop rulers: 1 pc, Gantry clearance: 850 mm, Pneumatic connection: 6 bar, Extraction nozzle: 160 mm, Dimensions LxWxH: 3,100 x 1,100 x 1,800 mm, Weight: 350 Dodpjxd U Ubsfx Adkjwc

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Dedpfxexd Ttpj Adkewc Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: excellent (used), Catalogue number 7689 TECHNICAL DATA - Tool diameter: 16 mm - Max drilling depth: 160 mm - Max milling length: 160 mm - Drilling unit adjustment: front/back, up/down, and sideways - Working table dimensions: 600x320 mm - Material clamping mechanism - Motor power: 2.2 kW - Dimensions (LxWxH): 950x740x1330 mm - Weight: 283 kg ADVANTAGES – Polish manufacture Dwedpfx Ajw Eluqodkec – Very good condition – Used drilling machine Net price: 6,300 PLN Net price: 1,480 EUR depending on the exchange rate of 4.25 EUR (Prices may change if there are significant fluctuations)

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 2832*93-A4B400, drilling capacity: 32 mm, stroke length: 300 mm, rotational speed (min.): 25 rpm, rotational speed (max.): 3,000 rpm, input voltage: 400 V, height adjustment type: mechanical, Equipment: rotational speed infinitely variable, Alzmetall Säulenbohrmaschine Type AB35/S Dwsdpfewd E T Dsx Adkoc Loading 300 mm Aufnahme MK-4 bj. 1996 Var. Geschwindigkeit. Kuhlung.

Condition: excellent (used), Surface of the base plate 880 x 700 mm Distance from spindle center to stand min./max. 220 / 620 mm Drill spindle: 13 mm passage Inner cone MK 3 Stroke 150 mm Dwedpfx Aeuigzpjdkoc Spindle speeds 25 - 2560 rpm. Spindle feeds 0.06 - 0.12 - 0.25 mm/rev Motor power (1500/3000 rpm) 1.2 / 1.5 HP

Condition: used, Year of construction: 1980, Number of drill spindles: 23 Pitch: 32 mm Drill bit holder: Screw-in thread Operation: Foot pedal Drilling direction: From above and from the front Swivel: Pneumatic Maximum throughput width: 720 mm Number of material clamps: 2 Type of material clamping: Pneumatic Design: Mobile Stop system: For hole line and construction line Dimensions: 1300 x 1200 x 1700 mm Approx. weight: 365 kg Motor power: 2.2 kW Dodpfx Aowkir Dsdkewc Storage location: Nattheim

Condition: used, Year of construction: 2006, functionality: fully functional, Drilling, Milling, and Dowel Insertion Center – KOCH Model WINDOOR-L, Year of Manufacture 2006 Working Length (Y): 150 – 800 mm / 50 – 1,350 mm (2,100 mm in 2 cycles) Material Thickness (Z): 14 – 60 mm Maximum material length: 2,100 mm. Material stops on the right and left are automatically lowered to allow processing of oversized workpieces. The machine is equipped with 2 working fields. 2 workpieces, each with a maximum width of 650 mm, can be placed independently. Wider workpieces are positioned separately. Working height: 900 mm Machine features: • 1 horizontal drilling station • Guide bush for drill bits • Glue injection and dowel insertion station Drilling unit: 2 kW Drill speed: 2,800 rpm, with air nozzles for cleaning the dowel holes 1 dowel drill bit, 8 mm dowel diameter Djdpfx Aoxgfd Sjdkewc Dowel length: 30 mm Dowel protrusion: 7–14 mm, set to 12 mm 2 Milling units, 3 kW each (12,000 rpm): One right-hand, one left-hand rotation with vertical spindle. Frequency inverter for stepless speed control from 6,000 – 12,000 rpm. Spindle diameter: 40 mm, collet length: 70 mm, profile diameter: 100 – 200 mm. 1 brake for the profiling motors, without acoustic enclosure. 1 Vibratory dowel feeder 1 glue pump 1:1 with central lubrication Electronic glue monitoring 1 material clamping system with 10 pneumatic cylinders • 1 material stop on the left and right • Mechanical digital readouts for adjustment Machine cycle is started by push buttons • Modem for remote diagnostics via telephone line KOCH Numeric positioning control PC Pentium CPU Screen area in local language OS (Windows XP Professional): English 15” touch panel VGA graphics + touch screen via LVDS connection USB interface to PC and touch panel Serial and parallel interface to PC 2.5” hard drive All machine functions, including motor control, entered via the touch panel Electrical supply: 400 V, 50 Hz, 3 phase Pneumatic connection: 1 x R 1/2" female thread, 7 bar Dust extraction airspeed: approx. 30 m/sec Ambient temperature at installation: min. 10°C (50°F), max. 40°C (100°F)

Condition: good (used), Year of construction: 2011, functionality: fully functional, ALZMETALL AX 4 / SV Pillar Drill 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: Used Year of Manufacture: 2011 Drilling Capacity: Steel E335 (St 60) 55 mm Thread Cutting: Steel E335 (St 60) M 42 Cast Iron EN-GJL-200 M 56 Short Spindle MT 4 Spindle Stroke 140 mm Usable Throat 300 mm Column Diameter 145 mm Machine Table, Usable Support 615 x 430 mm Spindle-Table Distance min./max. 150/735 mm T-slots, number x width x spacing: 2 x 14 x 224 mm Feed rate 0.1 + 0.3 mm/rev Machine height: approx. 1850 mm Net weight: approx. 380 kg Infinitely variable drive Motor: 1500 rpm Power: 3.0 kW Spindle speed: 70-2400 rpm Standard equipment: Main switch with lockable motor protection switch Mushroom push button (latching) for emergency stop Infinitely variable speed adjustment Digital speed display Feed overload protection Dsdsxd Trxjpfx Adkowc Protection class: IP 54 Spindle protection with electrical protection Available options: – 12. Machine light – 20.1 Thread cutting device – 24. Coolant system in the base – 37.1 Digital drilling depth indicator – 50.6 Drilling depth fine adjustment 0.1 mm – Combination table – Original documentation

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL table drilling machines and column drilling machines in our range. You can find an overview of the drilling machines on our homepage. If you have any questions, just call us. Here we offer the new series of ALZMETALL pillar drilling machines with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drilling machine Condition: NEW Standard equipment 7“ TFT - LCD display with touch function: - Manual input of spindle speed setpoint - Speed display actual value - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status displays and warnings in the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Continuous speed setting using adjustment lever - Spindle protection with electrical protection - Three separate buttons for clockwise rotation - anti-clockwise rotation - stop - Mushroom push button (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and anti-clockwise rotation via contactor control - Control voltage 24 volts - Protection class IP 54 - Paint finish: DD structural paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable projection (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Distance spindle-table (mm): 117 / 701 Feed: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Other options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Keyless drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For self-collection. Forklift available. Shipping also possible Dsdpexd Trlsfx Adkswc Subject to errors, changes and prior sale. Not the right machine? Then please contact us.

Condition: new, ALZMETALL AX3/SV pillar drilling machine NEW Manufacturer: Alzmetall Type: AX3 SV Condition: New Drilling capacity steel 40 mm Thread cutting steel M24 Cast M30 Short spindle MK 3 Spindle stroke 120 mm Usable projection 293 mm Column diameter 115 mm Machine table 515 x 360 mm Distance spindle-table 117/701 mm T-slots 2 x 14 x 224 mm Feed 0.1 + 0.2 mm/rev Machine height approx. 1840 mm Dwsdpfx Asxd Trfedkec Net weight approx. 270 kg Drive continuously variable Motor 750/ 1500 rpm Power 1.0 / 1.6 kW Spindle speed rpm 80-1125 Additional equipment: - Reversing switch - Machine light LED - Thread cutting device - Coolant device B Available immediately from stock

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Dwodpfx Asxd Tp Dsdkoc Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm Djdpfx Adexd Tpwjkowc 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Djdpsxd Tlxefx Adkowc Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300