Used Cnc Drilling Milling Machine for sale (83,591)

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm Dusdpfjx Sw Nmox Ag Rel W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM Djdpfx Agjxz Aygs Reul B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h Djdpfxotvmtkj Ag Rjul table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual

Condition: used, Year of construction: 2007, Serial no. 107.51.00.013, Control unit: Heidenhain make, Type: ITNC530, 5 axes, rotary/swivel table, travel X/Y/Z 1,000 x 700 x 700 mm, electrospindle by Step Tec, max. speed 24,000 rpm, 5-position pallet station, pallet size 500 x 600 mm, 165-position tool changer, tool holder HSK 63, chip conveyor, belt filter, ICS (internal coolant supply), coolant temperature control, enclosure, BLUM laser measuring system, tool and accessory package, workbench, mobile, 6 drawers, single-door, WTS cart, orange, 2 table carts, contents: tool holders, clamping devices, FCS zero-point clamping system, 5 grid plates, HD vise. Dsdexug Alspfx Ag Reul +++ Attention: Machine is part of an online auction! +++

Condition: used, CNC Universal Coordinate Drilling and Milling Machine FEHLMANN type PICOMAX 100-CNC 3 CNC control HEIDENHAIN TNC 155 make no. 16186651 year of construction 1986 spindle holder FEHLMANN SF32 drilling capacity Ø 30 mm in steel threading up to M20 in steel travel X: 850 mm, Y: 435 mm pinol stroke Z: 210 mm vertical movement milling head 580 mm Feed X and Y 1 to 8000 mm/min. Feed Z 1 to 4000 mm/min. Rapid traverse X and Y 8 m/min. rapid traverse Z 4 m/min. Table clamping surface 1570 x 500 mm distance spindle nose - table 130 - 720 mm projection spindle - column 450 mm Spindle speed 50 - 7100 rpm. Stepless spindle drive 10 kW Duedpshik Ezsfx Ag Rol Total connected power 20 kW Mains connection 400 Volt, 50 Hz - CNC control HEIDENHAIN TNC 155 with TFT monitor - 3 axes controlled, X, Y and Z pinol adjustment - hydro-mechanical tool clamping FEHLMANN SF32 - thread cutting device - cable remote control for machine operation and axis movements - motorized vertical movement of the milling head with shut-off via adjustable cams - 3D probe RENISHAW, type MP 11F with holder Fehlmann SF32 - 20 tool holders FEHLMANN SF32 - swivelling tool holder with 21 tool places - Coolant device in the machine column - control cabinet fixed to the machine - Documentation Operating manual, control manual and E-circuit diagrams space requirement L x W x H 2350 x 2000 x 2300 mm weight 3,2 ton. very good condition

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, High precision drilling and milling machine Fehlmann model Picomax 51 CNC Heidenhain TNC 360 very good condition CE conform Hthrgw39X Technical Data: >> Year of construction: 1995 >> Travel X/Y/Z 420/ 240/ 120 mm >> Travel distance W 450 mm >> Clamping surface (L x W) 730 x 280 mm >> Permissible table load 75 kg >> Distance table - spindle nose 0 - 560 mm >> Feed speed X/Y 1 - 7200 mm/min >> Feed speed Z 1 - 3600 mm/min >> Tool quick-change system SF 32 >> Infinitely variable speed range 9200 rpm >> Drive power 4 kW >> Space requirement approx. (W x D x H) 2.0 x 1.5 x 2.4 m >> Fourth axis dividing head Dujdpfx Asuxprlsg Rel About the machine : We offer a high-precision drilling and milling machine Fehlmann model Picomax 51 CNC in very good condition with CE conformity. It has a Heidenhain TNC 360 contouring control. The program creation in the user-friendly Heidenhain plain text dialog is particularly easy. HEIDENHAIN TNCs are workshop-oriented contouring controls with which you can program conventional milling and drilling operations directly on the machine in easy-to-understand plain-language dialog. The tool holders (see pictures) are included. Mechanically and electrically tested. Take the opportunity to inspect and try out this machine under power on site.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 15105602, travel distance X-axis: 700 mm, travel distance Y-axis: 315 mm, travel distance Z-axis: 180 mm, spindle speed (max.): 9,200 rpm, number of slots in tool magazine: 32, No reserve price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine within the specified timeframe between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Travel X-axis: 700 mm Travel Y-axis: 315 mm Travel Z-axis: 180 mm Travel W-axis: 495 mm Feed rate X-axis: 9 m/min Feed rate Y-axis: 9 m/min Feed rate Z-axis: 4 m/min Spindle speed (max.): 9,200 rpm Spindle speed (min.): 50 rpm Tool holder diameter: 30 mm Number of magazine tool slots: 32 Max. tool length: 260 mm Max. tool diameter without empty adjacent slots: 63 mm Table width: 410 mm Table length: 1,230 mm Table load capacity: 250 kg Dedpfoxm S R Ejx Ag Reul CNC control manufacturer: HEIDENHAIN MACHINE DETAILS Dimensions (L x W x H): 3,500 x 2,400 x 2,200 mm Distance floor to coordinate table: 1,010 mm Distance coordinate table to spindle nose: 125 to 620 mm Horizontal reach: 370 mm EQUIPMENT Documentation/manual Infinitely variable spindle speed FEHLMANN dividing unit (4th axis) 126 SK 30 tool holders Supplementary documentation

Condition: excellent (used), HEIDENHAIN TNC-310 Working travels 500x260x480 mm (+ spindle stroke 160 mm) cross table 880x320mm additional with Manual hand wheels Spindle speeds 100-9000 Rpm Misc accessories Dedpfsfrbtdjx Ag Reul MARCELS MASCHINEN CH

Year of construction: 1992, condition: ready for operation (used), A Wotan CNC horizontal boring and milling machine is available. Travel X/Y/Z: 8000mm/3500mm/1000mm, travel W/U: 700mm/1600mm, table dimensions X/Y: 8000mm/4500mm, plate fields: 2, rotary-shift table dimensions X/Y: 2500mm/2000mm, max. table load: 25000kg, spindle speed: 2000rpm, tool positions: 60, power: 63kW, control: Siemens Sinumerik 850M. Includes 4x 90° angle heads. Documentation available. An on-site inspection is possible. Dusdoxrf Ihepfx Ag Rol

Condition: excellent (used), Control : Heidenhain TNC 426 Dimensions Space requirement (WxDxH) 1.92x1.85x2.4 m Weight Weight approx. 2'400 kg Working range travel lengthwise X-axis 500 mm Transverse travel Y-axis 255 mm Quill stroke (controlled) Z-axis 147 mm Quill stroke (manual) Z-axis 160 mm Machine head travel W-axis 500 mm Feed rates Speeds: Rapid traverse - X- and Y-axis 1-11,000 mm/min - Z-axis 1-6,000 mm/min - W-axis 1-3,600 mm/min Feed forces - X- and Y-axis 6'500 N - Z-axis 8'000 N Rapid traverse - X- and Y-axis 11 mm/min - Z-axis 6 mm/min Displacement measuring system Direct measuring system via linear scale X / Y / Z axis Resolution Indirect measuring system via rotary encoder Z axis Resolution in X-, Y-, Z- and W-axis 0.001 mm Accuracy of position tolerance P axis(es) X / Y 0.005 mm Dedpfx Agjtp S R Hs Reul Position spread Ps axis(es) X / Y 0.003 mm Z / W 0.005 mm Table clamping surface (lxw) 885 x 320 mm Working area T-slots: - Number 5 - - Width 12-H8 mm - Spacing 50 mm Permissible table load 250 kg Table height from floor 1040 mm Distance table-spindle nose (min-max) 0-120-620 mm Horizontal projection 300 mm Work spindle Quick-change tool system SF 32 - Hydraulic tool change via push buttons - - Repeat accuracy 0.002 mm - Changing time (manual) approx. 5 sec Speed range (infinitely variable) 50-9,000 rpm Drive power 7.6 kW Max. Torque 65 Nm Cutting capacity Drilling capacity ø 25 mm Thread cutting M 20 - Shuttering Semi-shuttering with sliding doors - - Coolant Coolant: Lubrication - External tank, capacity 100 l - Pump flow rate 75 l/min Central lubrication system Vogel

Condition: used, 4-axis CNC drilling and milling machine IXION Type 30 CNC W VMC, BAZ, machining center Year of construction approx. 1997, machine overhauled in 2020 Travel X: 600 mm Y: 350 mm Z: 600 mm Table size 800 x 400 mm T-slot spacing 75 mm Table load 300 kg Spindle holder SK 40 (tightening bolt DIN 69872 A) Spindle speed 20-5000 rpm Torque at the spindle max. 150 Nm Distance between spindle nose and table max. 660 mm Feed speed X, Y and Z 0 - 5000 mm/min. infinitely variable Rapid traverse speed X, Y and Z 15000 mm/min. Tool change time approx. 5 sec. Tool change time from chip to chip approx. 7.5 sec. Milling capacity in St 60 150 ccm/min. Drilling capacity in St 60 35 mm Thread cutting capacity in St 60 M24 Spindle motor drive power 5 kW (10 kW at 25% duty cycle) Mains connection 400 Volt, 50 Hz - CNC control Heidenhain TNC 415 with 12" TFT display - Electronic handwheel - RS 232 interface - 12-position tool changer - hydro-mechanical tool clamping - Rotary axis as dividing head on the table = 4th axis, MECATECNICA type DCN 250-8, jaws lathe chuck Ø 200 mm Speed approx. 25 rpm, transmission ratio 1:180 Duedpeu Tln Nofx Ag Rol - Cabin lighting via 2x halogen spotlights - Chip conveyor with coolant pump - Switch cabinet fixed to the machine Space required for transportation Length 320 cm x width 230 cm x height 300 cm Footprint of the machine with chip conveyor L x W x H 3200 x 3100 x 3000 mm Weight of the machine 3100 kg Weight of the chip conveyor approx. 200 kg good condition

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill stroke: 160 mm, table width: 320 mm, table length: 880 mm, X-500, Y-250 , Z- quill stroke 160 , W- traverse path machine head 480 , table 880 x 320 , max. 320 kg , fixture SF 32 , 100-9000 rpm , 5 kW , 60 Nm , Heidenhauin TNC 124 Dujdpsq R Rb Hsfx Ag Rjl Many accessories

Condition: good (used), Year of construction: 1993, Tool holder SK40, speed range 20-4000 rpm, clamping area 1.100 x 600 mm Dsdelcbggjpfx Ag Rsul

Condition: good (used), Year of construction: 2013, operating hours: 11,427 h, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, TECHNICAL DETAILS Type: Horizontal drilling and milling machine (T-table design) Control: CNC Heidenhain iTNC 530 Travel paths X-axis travel: 3,500 mm Y-axis travel: 2,000 mm Z-axis travel: 1,250 mm Dsdpfjwc Ryasx Ag Rsul Table Table dimensions: 1,800 × 2,200 mm B-axis: 360° continuous rotary table Spindle Spindle speed: 3,000 rpm Spindle diameter: 130 mm Table load: 12 t Feed rate Working and rapid traverse speed: 10 m/min Cooling system Internal cooling through spindle: 20 bar (CHOV 20) External cooling: available MACHINE DETAILS CNC system switched on: 41,414 h Total machine runtime: 40,471 Program runtime: 9,805 Spindle runtime: 11,428 Runtime with increased spindle speed: 70 h EQUIPMENT - Blum TC60 touch probe - Heidenhain DNC - Through-spindle cooling - Continuously rotating rotary table - No chip conveyor

Year of construction: 1994, condition: ready for operation (used), A CNC universal tool milling and drilling machine Hermle is available. Travel X/Y/Z: 700mm/550mm/500mm, quill stroke: 95mm, spindle power: 12kW, spindle speed: 4200rpm, spindle swivel: +/-75°, tool holder: SK40, clamping force: 12kN, feed rate: 10m/min, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4400mm/4250mm/2300mm, weight: approx. 4500kg, control: Heidenhain TNC 425. Documentation available. An on-site inspection is possible. Djdpfow D Evlsx Ag Roul

Condition: good (used), Year of construction: 2013, spindle speed (min.): 3,000 rpm, feed length Y-axis: 500 mm, Mirror diameter: 10" Duodpfsx Nmuaox Ag Rel Neck diameter: 400 mm

Condition: ready for operation (used), Year of construction: 2025, number of axes: 3, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Dodpfjx D Dnksx Ag Rjul Application Types Boring & Drilling (Wood)

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Duedpswtnxnefx Ag Rsl Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10.500 mm Verlengd bereik van de robotarm (links en rechts): 3045 mm maximale werkstuklengte indien het een profiel betreft: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10.500 x 3045 mm max. werkstukhoogte: 3500 mm 13-positie gereedschapswisselaar: - 12 elektrische gereedschappen - 1 meetsonde Freeskop: -SK40 - 10 kW op spindel 12.000 tpm / 15.000 tpm - 7,5 kW op spindel / 18 000 tpm - 4 kW op spindel / 24.000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit wijzigen naar één werkgebied (voor een groot werkstuk) of het opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken. Dsdov Sfk Hopfx Ag Rjul

Condition: used, Year of construction: 2012, SACHMAN T20 fixed bed milling machine, year 1998, retrofitted in 2012 with TNC 530. Travels: X 3500, Y 1200, Z 1200 mm – table 3700x1100 mm. Automatic head 2.5° x 2.5°, speed 4000 rpm. 20-position tool changer (ATC). Dujdpfx Agjx Hri Ds Rol

Condition: used, Year of construction: 1997, travel distance X-axis: 3,708 mm, travel distance Y-axis: 1,208 mm, travel distance Z-axis: 1,002 mm, feed length X-axis: 5,000 mm, feed length Y-axis: 5,000 mm, feed length Z-axis: 5,000 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 35 rpm, CNC Bed-Type Milling Machine – Universal ZAYER 20 KF 4000 Year of manufacture: 1997 CNC control: HEIDENHAIN TNC 426/430 Technical specifications: X travel: 3708 mm Y travel: 1208 mm Z travel: 1002 mm Table size: 4000 x 1000 mm Tool holder: SK 50 Spindle speeds: 35–3000 rpm Spindle motor: 22 kW Feed range: 6–5000 mm/min Rapid traverse: 15 m/min Machine weight: approx. 19.5 t Dsdpswtpfpefx Ag Rjul ADDITIONAL INFORMATION Electronic handwheel Automatically swivelling milling head vertical/horizontal +/-120° (stepless) Milling head automatically swivelling in the rear axis / 90° rotation Coolant system The machine can be inspected under power. Delivery time: immediately Sale from location Westerkappeln Dismantling, loading available on request.

Condition: new, Year of construction: 2025, operating hours: 1 h, functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 8,000 rpm, controller manufacturer: STYLE CNC Machines, number of slots in tool magazine: 24, motor manufacturer: FANUC, Delivery after consultation Ref: 24F048 Year of construction: 2025 Condition: Showroom Specifications: - X-axis: 4000 mm - Y-axis: 1000 mm - Z-axis: 1000 mm - 26 kW (S6) main motor - 8000 rpm Dusdpfx Agew Ty S Se Rel - BT-40 - Automatic tool changer (24 positions) - Remote service (IXON) + network connection - Stronger coolant pump incl. spray gun - Upgraded to the latest STYLE software available

Condition: ready for operation (used), Year of construction: 2025, This QUICK CNC KQ-62 Lite multi-spindle drilling machine was manufactured in 2025. It handles workpieces from 70 to 2400 mm in length, 9 to 60 mm in thickness, and 30 to 1220 mm in width. Features include a Higerman control system, dual 3.5 kW milling spindles at 18000 rpm, and comprehensive drilling units. Consider the opportunity to buy this QUICK CNC KQ-62 Lite multi-spindle drilling machine. Contact us for more information. Dusdpjx S Sizefx Ag Rjl Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Year of construction: 2002, 1 GOGLIO MX 60 moving column milling machine from 2002 CNC SELCA 4045D X 6000 Z 1800 Y 1100 Duedpfx Aswxacvjg Rsl Fixed table 6000 x 2000 Automatic head 1°X 3° Speed 3000 rpm - 24 kW Through-spindle coolant 20 bar ATC 40 tools ISO 50 Chip conveyor Still in operation at the customer

Condition: used, Year of construction: 1988, x-travel 0600 mm y-travel 450 mm z-travel 450 mm quill stroke 80 mm table-size 1000 x 400 mm spindle turning speed range 20 - 3000 U/min spindle taper SK 40 Dodpfx Agsu Rt I Ie Roul feeds - automatic programming 1 - 4000 mm/min rapid traverse 6 m/min control Philips 432 power capacity 12 kW total power requirement 15 kW CNC control Philips 423, V-head swivelling, coolant pump, hydraulic tool clamping, autom. central lubrication, machine light, with protection cabin, diverse accessories.