Used Gary Long Furnace for sale (7,321)

Year of construction: 2005, condition: ready for operation (used), Usable space: approx. 4m³, max. temperature: 400°C. The furnace is located in the outdoor storage area. Documentation available. An on site inspection is possible. Dwsdpfxeygw S Ao Aptsb

Condition: ready for operation (used), Year of construction: 2018, The UniTower is suitable to store bars or extrusions as well as sheet metal, plates, Euro pallets or boxes. Pallets: Dimensions X/Y/Z: 3000mm/1500mm/90mm, payload per pallet: 1500kg, number of storage spaces: 86 pieces. Payload: 15kN, occupancy rate: 90%. Total dimensions without stations X/Y/Z: approx. 9000mm/6000mm/5800mm. On-site inspection is possible. Dwsdpfjxv Au Tjx Aptob

Year of construction: 1986, condition: ready for operation (used), A Herdieckerhoff pot annealing furnace for the heat treatment of ring tubes is available. Maximum temperature: 1000°C, operating medium: inert gas, max. net charge weight: 1200kg, support height: 3850mm, furnace diameter: 2200mm, furnace height: 4650mm. Including 3x vacuum-tight and water-cooled circulators and 3x circulation impellers. Documentation available. On-site inspection is possible. Djdpfx Aovxvgrjptowb

Year of construction: 2018, condition: ready for operation (used), A Thermconcept high-temperature tube furnace is available. T. max.: 1700°C, heated length: 200mm, tube diameter/length: 60mm/600mm, power: 3.3kW, dimensions X/Y/Z: 460mm/530mm/830mm. Documentation available. Dedpfx Apjtxb Avstswb

Condition: ready for operation (used), A retort furnace PFS Anlagenbau UG for gas nitriding, nitrocarburizing, and tempering is available. Load weight range: 750kg-6000kg, max. operating temperature: 750°C, treatment chamber dimensions X/Y/Z: 1800mm/900mm/900mm, number of burners: 4, burner type: recuperative, burner output: 4×80kW, loading height: 1200mm, max. evacuation temperature: 350°C, retort material: 1.4841, circulator air volume flow: 10000m³/h, nitriding system manufacturer: Process-Electronic, vacuum pump capacity: 240m³/h, total pressure: below 0.7mbar, max. operating pressure: 1.45bar. Documentation available. An on-site inspection is possible. Dwjdpfxjy N Uxgo Aptjb

Year of construction: 1992, condition: ready for operation (used), Gross combustion chamber: 800l, usable combustion chamber: 500l, combustion chamber dimensions X/Y/Z: 820mm/600mm/1015mm, connected load: 100kW, max. operating temperature: 1400°C, machine dimensions X/Y/Z: approx. 1450mm/1150mm/2100mm, weight: approx. 1500kg. Including fresh air blower and control cabinet with controller Jumo Imago 500. On site inspection is possible. Dedpeyfv N Rsfx Aptswb

Year of construction: 2015, condition: ready for operation (used), There are 2 vacuum retort furnaces available, 1x vertical & 1x horizontal. Vertical: Xerion XRetort, year of construction: 2015, U: 400V, P: 48kW, Tmax: 700°C. Horizontal: Year of construction: 2008, U: 400V, P: 18kW, Tmax. 700°C. On-site inspection is possible. Dwodpfetndwusx Apteb

Condition: ready for operation (used), Year of construction: 2012, An automatic Kasto dual-tower storage system is available. Cassette usable dimensions X/Y/Z: 6500mm/840mm/440mm, cassette external dimensions X/Y/Z: 6620mm/976mm/485mm, C-profile height: 245mm, max. cassette payload: 1000kg, storage locations: 49, lifting unit speed: 22m/min, pull and push speed: 20m/min, system performance: 30double cycles/h, overall system dimensions X/Y/Z: approx. 7600mm/7250mm/7900mm. Documentation available. An on-site inspection is possible. Dwedpfxozd Eivo Aptsb

Year of construction: 2001, condition: ready for operation (used), A horizontal glass tempering furnace is offered. Max. temperature: 750°C, heating zones: 10, control system: PLC. Equipped with roller conveyor infeed and outfeed with ceramic rollers, high-pressure cooling blower, control cabinets, hydraulic power unit. Inspection possible by appointment. Djdpfx Apszgwyfjtewb

Condition: good (used), Code: 0450 Brand: MABO - ITALY Model: OLIMPIC - CE Standard Belt sanding machine for wood, joinery, furniture, wooden joinery, metals, stainless steel, aluminium and other materials – CE Standard Technical data: Work surface length 2500 mm Work surface width 600 mm Table height adjustment by handwheel Belt width 120 mm Motor power 2 Hp Speed 2820 rpm Dust extraction inlet diameter 110 mm Overall dimensions mm 3000 x 1200 x 1600 h Djdpfezmywmex Aptewb Weight kg 230

Condition: used, Year of construction: 1988, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 20992, Dear Mr. / Mrs., we have opportunity to offer you IPSEN VTTC-324 from 1988. Characteristic of vacuum furnace: Sn = 165 kVA Un = 400 V, 50Hz In = 240 A Useful dimension: 450mm x 600mm x 900mm Power of heaters = 120 kW Voltage of heaters = 43V, 50Hz Current of heaters = 1613 A Temperature range = 350 - 1320 C Absolute vacuum = 1 x 10e-5 (diffusion pump) Absolute pressure = 5 bar Dwsdewah R Ropfx Aptsb Also, with furnace is coming lot of spare parts and equipment for thermal heating process (tank for gas, heaters, lot of controllers, chargers and everything). For all information that you need, please contact me.

Condition: like new (used), Year of construction: 2015, machine/vehicle number: 27.15.494, functionality: fully functional, input voltage: 380 V, input current: 630 A, input frequency: 50 Hz, overall weight: 100 kg, Equipment: CE marking, 5M Tandem furnace (inductional) Dsdpfx Ajzqclheptswb

Condition: ready for operation (used), Year of construction: 1977, Usable furnace width: 600mm, usable furnace height: 310mm, clear passage height: 350mm, furnace zone length: 3500mm, number of heating zones: 3, radiant tube control: On/Off, radiant tube monitoring: via UV cell, max. temperature: 1050°C, operating temperature: approx. 800-1000°C, material processed: transformer and slit-strip cores, net/gross throughput: 750/860kg/h, max. grate load: 250kg, permissible grate weight: 50kg, cycle time per grate: approx. 20min, heating, equalizing, holding: approx. 850°C, approx. 120min, cooling: from approx. 850°C to below approx. 200°C in approx. 180min, number of grates: inlet lock: 1, annealing furnace: 6, furnace neck: 1, cooling section: 9, outlet lock: 0, grate return transport (buffer): 18, grate width: 600mm, grate length: 600mm, grate height: 60mm, overall grate height: 210mm, frame height: 150mm, weight per grate: approx. 50kg, annealing furnace length: 5000mm, cooling zone length: 5700mm, overall furnace system length: 15,100mm, loading height of the system: 700mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Dedeztrbkopfx Aptswb

Condition: ready for operation (used), Year of construction: 1975, A Bosch OBD 10/53L 12 and a Bosch OBD 15/54L 17 are available, strip width: 250mm, usable height: 260mm, number of furnace doors: 3, doors: inlet, intermediate and outlet door, strip speed: 1.8m/min, cycle time: 25min, cycle distance: 700mm, operating temperature of decarburizing zone: 760°C, operating temperature of bluing zone: 550°C, heating capacity of decarburizing zone: 84kW, heating capacity of bluing zone: 18kW, evaporator heating capacity: 3kW, evaporator water consumption: approx. 0.5l distilled water/h, energy consumption: approx. 45kWh/100kg net weight, total decarburizing time: 150min, cycle time: 25min, cycles in the decarburizing zone: 6, decarburizing zone temperature: 760°C, holding time: 30min, propane/air ratio for protective gas generation: 1:18, protective gas quantity: approx. 35Nm³/h, propane quantity: 2Nm³/h, air quantity: 36Nm³/h, combustion tower temperature: 1250°C, dew point or cooling water temperature of direct cooler: 23.5-25.5°C, total bluing time: 75min, cycles in the bluing zone: 3, bluing zone temperature: 550°C, holding time: 50min, evaporator temperature: 120°C, total connected load: 111kW, length: 14,200mm, width: 1650mm, height: 3000mm, with an Exogas Generator Gebrüder Hammer GmbH and documentation. An on-site inspection is possible. Dwjdpfx Apeztrbwsteb

Condition: new, Long Reach Boom & Arm for Excavators – Custom Made up to 22 m | Dredging, Canal Cleaning & Deep Excavation | Galen Manufacturer Custom-built long reach boom and arm systems manufactured by Galen for excavators that need extended digging depth and reach. Our long reach excavator boom is engineered for dredging, river and canal cleaning, pond and reservoir maintenance, deep foundation and basement excavation, slope profiling and embankment work – any job where a standard boom simply cannot reach far or deep enough. Djdpfx Aszfwdboptswb We manufacture long reach booms made to order, with reach up to 22 m and beyond, built from Hardox and Strenx high-strength steel for the best balance of reach, durability and weight. Each long reach boom-arm system is produced with full structural calculation, so that machine stability, hydraulic flow and bucket capacity are correctly matched to the extended geometry. The result is a properly balanced long reach system – not just a longer arm – that works safely at full extension. Supplied as a complete long reach boom + arm conversion or as individual sections, including correct hydraulic piping, cylinders and counterweight recommendations. We produce for all major excavator brands and models – Caterpillar, Komatsu, Hitachi, Volvo, Hidromek, Hyundai, Doosan, Liebherr and others – with mounting matched to your exact machine. Typical applications: dredging and waterway maintenance, canal and ditch cleaning, deep excavation, lake and pond work, slope and embankment shaping, and reach work over water or soft ground. As a manufacturer (not a reseller), Galen offers fully custom geometry, OEM/private-label production, engineering support, and export to Gulf, Balkan, Central Asian and European markets. CE-compliant production available on request. Why choose Galen long reach boom-arm: Custom reach engineered to your machine – up to 22 m+ Hardox & Strenx construction: high strength, low added weight Engineered for stability – balanced geometry, correct hydraulics & counterweight advice Complete long reach system or individual boom/arm sections For dredging, canal cleaning and deep excavation Manufacturer pricing, structural support, worldwide shipping Send us your excavator brand, model, operating weight and target reach, and we will engineer a long reach boom-arm system sized exactly to your machine.

Year of construction: 2024, condition: new, Horizontal Oil Quenching Furnace Technical details: Size range: 450x350x300 up to 1200x800x800 Load capacity: 100 kg to 1200 kg Transferring duration: maximum 29sec, to lower than 17sec Ultimate temperature: 1320°C Dedot D Tkuopfx Aptswb Final Vacuum: 10-1/10-4 Pa Temperature Uniformity Survey (TUS): ≤±5 °C Pressure Rise Rate: ≤0.5 Pa/h Cooling gas pressure:

Condition: ready for operation (used), functionality: fully functional, Vita ZYrcomat Firing Furnace / Firing Device / Ceramic Furnace High-temperature firing device for the VITA In-Ceram® technology. The VITA ZYrcomat T is a specially developed firing unit for atmospheric high-temperature sintering firings. Atmospheric long-term high-temperature sintering firings for frameworks made of zirconium dioxide and aluminum oxide. Djdpfx Apsxgb Nqjtjwb Technical Data Dimensions: Firing device: W × H × D = 360 × 810 × 490 mm Power unit: W × H × D = 500 × 210 × 350 mm Weight: Firing device: 32 kg Housing with power unit: 27.5 kg Firing chamber (useable space): Diameter: 84 mm Height: 90 mm Firing chamber temperature: max. 1600 °C Electrical Data Electrical connection: 230 V AC, 50 Hz Power consumption: max. 1500 W Classification: Protection class 1 Good working condition. Please chech out out other listings as well.

Condition: used, Furnace, Chamber Furnace, Heat Treatment Furnace, Hardening Furnace, NABERTHERM Professional Industrial Chamber Furnace – 1150°C, Used Machine Manufacturer Nabertherm (Made in West Germany) Model N81 Serial Number 72019 Dwsdpfx Aszc Ihaeptsb Year of Manufacture 1988 Item Number 7082 Technical Specifications Maximum Temperature: 1150°C Power Rating: 18 kW Operating Voltage: 380 V, 3N~ (Three-phase industrial power supply, 50 Hz) Current Consumption: 27 A Furnace Door Opening: 500 × 250 mm Overall Dimensions Width: 1200 mm Depth: 1800 mm Height: 1750 mm

Condition: used, Crate, Long Material Storage, used machine Overall dimensions : 6000 x 1290 x 570 mm Load capacity : 2000 kg Dwjdpey Aydzjfx Apteb Usable dimensions : 6000 x 1200 x 430 mm Weight : 440 kg

Condition: used, Stackable Storage Pallet, Long Material Cradle, Used Equipment Manufacturer: Alba Metál Alpin Kft. Dwedpfx Ajy Ayd Ieptsb Year of Manufacture: 2017 Load Capacity: 2000 kg Technical Specifications: Overall Dimensions (External): 6000 x 1400 x 750 mm Usable Dimensions (Internal): 6000 x 1230 x 610 mm Weight: 510 kg

Condition: ready for operation (used), Heat treatment furnace, annealing furnace, furnace, Used equipment Manufacturer: Budapest Electric Cable Factory Overall dimensions: 890 x 1350 x 1510 mm Weight: 785 kg Electrical data: 400 V, Temperature controller adjustable up to 1100°C +temperature controller in the electrical box Dwedpfouhmacsx Aptsb

Year of construction: 1995, condition: ready for operation (used), Product: Electrosinter Year of production: 1995 Air transport: 2x9000m3 Airspace / Capacity: 32m3 Oven opening: 1200 x 1200mm // 80 x 1500mm Heat load: 55-160kW G20 natural gas Air temperature: 170-220 ° C Enclosure size: 2600 x 10300 x 3600mm Electrical cabinets included. Dodpfjg R Sh Aox Aptewb It requires electronic and mechanical renovation. Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: used, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781/1L50 FR Serial-No. 1793 Heftdicke / Staple thickness 0-8mm Heftarmlänge / Staple Arm length 50cm Heftarmbreite vorn / Handle width at the front 10mm Klammerrückenlänge innen / Bracket Back Length Inside 12mm Heftdraht Runddraht Nr. 21 - 23 / Flachdraht II - IV Staple Wire Round Wire No. 21 - 23 / Flat Wire II - IV Heftgeschwindigkeit 250 Klammern pro min / Stapling Speed 250 staples/min Dwedpfjxvdmdex Aptsb Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, machine/vehicle number: 7160, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1Q50R Serial-No. 7160 Armlänge / Arm length 55cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Dodpfjiiilmsx Aptewb

Condition: used, machine/vehicle number: 8170126, Langarm-Drahtheftmaschine / Long arm Wire Stitching Machine Polygraph 781Kartonagenhefter / Carton Stitcher Typ / Model 781/1L75FR Serial-No. 8170126 Armlänge / Arm length 75cm Fußpedal / Foot pedal Online-Video-Inspection by Skype-Video Dwedoiiilqjpfx Aptsb We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test