Used Gas Cutting Machine for sale (67,039)

Condition: used, Year of construction: 2024, CNC plasma cutting machine Manufacturer: Microstep Type: MasterCut Compact 3001.15P Year of manufacture: 2024 Working area: 1,500 x 3,000 mm 1 x Plasma torch with Kjellberg Q1500 plasma source with automatic O² gas console (O², N²) 1 x TEKA filter system for outdoor installation Bwodpfx Apjytqmmeron 1 x Nesting program on the machine control system Availability: immediately 3626ä

Condition: used, Year of construction: 2005, CNC portal plasma cutting machine Manufacturer: Messer Type: Omnimat L8000 Bjdpfx Apsykruajrswn Year of manufacture: 2005 CNC control: Global Control Plus Track gauge: 8,000 mm Equipment: 1 x oxy-fuel bevel cutting unit DAF/L for weld preparation (bevels) 1 x skew rotator with Kjellberg FineFocus 800 power source 3 x oxy-fuel torches ALFA 1 x marking unit FineMarker Without table, filter, and rail ä3626

Condition: used, Year of construction: 2006, CNC gantry plasma cutting machine Manufacturer: Messer Type: Multitherm 4000 Year of manufacture: 2006 CNC control: Global Control Bwodpfxjykpd Ej Aprsn Working area: 3 x 12 m Track gauge: 4,000 mm Track length: 15 m Extraction table 1 x plasma torch with Hypertherm HPR260 1 x plasma torch with Skew Rotator Delta and Hypertherm HPR260 Without filter system ä3626

Condition: used, Year of construction: 2023, CNC plasma cutting machine Manufacturer: Messer Cutting Systems Type: MetalMaster 2.0 6025 Year of manufacture: 2023 CNC control: Global Control 2.0 Working area: 2,500 x 6,000 mm 1 x plasma torch with Kjellberg HiFocus 280i neo power source Automatic gas console Filter system Donaldson DFPRO 6 Cyclopeel Cutting software Omniwin Standard Availability: immediate Bjdpfeyhd Rbjx Aprjwn ä3626

Condition: used, Year of construction: 2019, CNC Portal Plasma Cutting Machine Manufacturer: Microstep Type: MG 4501.20 BkP Year of manufacture: 2019 CNC control Working area: 2,000 x 4,500 mm 1 x 2D plasma torch with Hypertherm XPR300 power source, including Optimix gas console 1 x Drilling spindle 26 kW, up to 40 mm diameter, including 8-position tool changer 1 x Preparation for retrofitting a rotator (for bevel cuts) Bsdpfx Ajyay H Aeprown 1 x Nesting program on the CNC control ä3626 Availability: May 2026

Condition: good (used), Year of construction: 2008, CNC Portal Plasma Cutting Machine Bwodpfjiff Dasx Apren Manufacturer: Messer Type: Multitherm 4000 CNC Control: Global Control Plus Year of Construction: 2008 Retrofit: 2019 Extraction table: 2,000 x 3,000 mm 1 Oxy-fuel torch ALFA 1 Plasma torch Power source: Kjellberg HiFocus 280i Filter system: Z-Line 9 ZDC Our own technicians are available for installation, commissioning, and training! All spare parts are in stock. 3626ä

Condition: used, Year of construction: 2012, CNC laser cutting system Manufacturer: Microstep Type: FibreLas MSF 3001.15L Year of manufacture: 2012 CNC control: iMSNC Windows Approximate laser operating hours: 4,000-5,000 Laser power: 2.5 kW Working area: 3,000 x 1,500 mm Sheet thickness, steel (max.): 15 mm Sheet thickness, stainless steel (max.): 8 mm Sheet thickness, aluminum (max.): 8 mm Operating temperature: Bwsdpfx Apex Eh Droren +10 to +30 °C and max. 90% humidity (at 20° C) Extraction duct (left and right): Outlet on the left, diameter 250 mm Laser source: IPG Ytterbium laser system YLS 2.5 kW Laser chiller: LC 170.01-A.3.5 Voltage: 400 V / 3P / 50 Hz Filter system: TEKA 4H 5.5 kW External dimensions of the complete system: approx. 10,400 x 3,610 mm 3626

Condition: used, Year of construction: 2006, CNC gantry cutting machine Manufacturer: Bach Type: ACK-2D Year of manufacture: 2006 CNC control: NBS300 Bwedpew El Udsfx Aprsn Work table: 1.5 x 6 m 2 oxy-fuel torches 3626 operating hours

Condition: good (used), Year of construction: 2011, CNC Portal Cutting Machine Manufacturer: Microstep Type: MasterCut-AM 9001.20 Year of manufacture: 2011 CNC control: iMSNC with integrated network card Working area: 2,000 x 9,000 mm Extraction table 1 oxy-fuel burner Cutting thickness up to 150 mm 1 plasma marking unit Kjellberg Laser pointer Technical data in detail: 1x oxy-fuel burner (1 x fully automatic) 1x plasma marking unit (fully automatic) Kjellberg Finsterwalde MicroStep® CNC machine control iMSNC with integrated network card LCD operator panels on the portal Laser pointer with automatic offset transfer Parameter database iMSNC control / Windows® Programming system "AsperWin-Basic" for programming directly on the machine control Module macro library "AsperWin Select" Module NC simulator "AsperWin NC-Sim" Module "Plasma Marking" (for peening) via plasma source Bedpsudn Rzsfx Aprswn Module "THC" / Automatic height control via arc voltage USB 2.0 connection for storage media Module remote diagnostics MicroStep® "iFDS Win" Remote maintenance access via TeamViewer Central gas control via proportional valves Parameter database for 1 burner Power cables Gas hoses for preheating oxygen, cutting oxygen Acetylene machine cutting torch RHÖNA-Acetylene FIT+ 1 capacitive height control IHT / for oxy-fuel 1 electric ignition unit RHÖNA-Acetylene Double-sided cable protection (collision protection) of the portal bridge via emergency stop Kjellberg® plasma marking unit FineMarker Fully automatic support for FineMarker Kjellberg® plasma labeling system FineMarker CNC interface for FineMarker / connection to the CNC control Module for the automatic control of the marking device 3626

Condition: new, Year of construction: 2025, Operating Area: 1000*1500mm Machine overall dimensions: 3630×2200×1940mm Laser Output Power: IPG 3000w/2000w/1500w X/Y-axis positioning accuracy: ±0.05mm Bedpfxog Rgq So Aprswn X/Y-axis repositioning accuracy: ±0.03mm X/Y-axis Max. linkage speed: 60m/min 1. A Compact Design with Complete Protection Small occupied space balances complete protection and higher safety. 2.No Quiver when Cutting Thin Sheet i Series are capable of cutting edges of thin sheet and ensure no quivering marks. 3. Cast Iron Bed Featuring good shock absorption, Cast Iron Bed keeps its shape all the way with the optimal mechanical property.

Condition: new, Year of construction: 2026, functionality: fully functional, It is a perfect complement to obtain the desired width product from the edged plates. While providing ease of use with its simple, compact and versatile designs, it can be integrated into the existing facility of any business thanks to its easy assembly. - Models with 120-160 mm cutting heights - Possibility to apply 2 or 3 saws to the movable and fixed sleeve Bsdpfxorzakms Aprjwn - Manual or automatic feeding - Automatic fueling - Possibility to process 1000 mm wide products Optional equipment; - PLC controlled manual or automatic feeding - Up to 3 axis movable saw option - Removal of waste from the system thanks to separator arms - Cutting easily and in the most efficient way with the alignment arms. Technical Specifications Max. Cutting Height : 120 mm / 160 mm Min. Cutting Height : 15 mm Max. Cut Width : 800 mm Max. Working Width : 1000 mm Min. Cut Length : 800 mm Max. Feed Rate : 40 m/min Saw Rotation Cycle : 3000 rpm Upper Rollers : 2 x 240 Bottom Rollers : 5 x Ø135 mm (120)

Condition: used, functionality: fully functional, machine/vehicle number: div., For Sale: • 1x Kuris Pionier, spreading machine including spreading table, automatic servo-cutter, and band knife. Set price: €6,750 (disassembly by the buyer) • 1x Kuris Pionier, spreading machine including spreading table and band knife. Set price: €5,750 (disassembly by the buyer) Bjdpswpww Eefx Aprswn 1x Bierrebi cutting machine, including blade preparation table. Price: €4,950

Condition: good (used), Remote control for inert gas welding device, inert gas device, welding rectifier, hand controller Bwjdjgrlppjpfx Apron -Manufacturer: Fronius, remote control RCU5000i .: 4,046,098 -Voltage: U1 24 V -Dimensions: 180/260/H50 mm -Weight: 1.5 kg

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically -Year of manufacture: 1995 Bjdpfsb A Nc Hox Aprjwn

Condition: repair required (used), functionality: limited functionality, Year of construction: 2014, TRUMPF TruLaser 5030 fiber Year of manufacture: 2014 5,000 Watt TruDisk 5001 Siemens 840D SL Special price due to site closure / insolvency Update 05/27/2026: The machine has been thoroughly cleaned. It is in considerably better condition than can be seen in the photographs. For sale is a used TRUMPF TruLaser 5030 fiber from 2014. The machine was in continuous productive use until 2025 and, according to the previous owner, operated without any known problems. Subsequently, the system was shut down for approximately one year as part of an insolvency and was no longer operated. Currently, the machine is not connected and therefore cannot be demonstrated. Ideal machine for a buyer who wants to refurbish, clean, connect and put the system back into operation themselves. For this purpose, the machine is available at an exceptionally attractive special price. Extremely affordable. Purchase price in 2014 was approximately EUR 300,000. Technical data Manufacturer: TRUMPF Model: TruLaser 5030 fiber Year of manufacture: 2014 Machine type: Laser cutting system Laser source: TRUMPF TruDisk 5001 solid-state laser Laser power: 5,000 W Control system: Siemens 840D SL Working area / max. sheet size: 3,050 x 1,550 mm Travel range X-axis: 3,000 mm Travel range Y-axis: 1,500 mm Travel range Z-axis: 116 mm Rapid traverse: 280 m/min Max. workpiece weight: 900 kg Max. sheet thickness: 10 - 25 mm according to documentation Operating voltage: 400 V / 50 Hz Machine weight: approx. 12,000 kg Installation dimensions L x W x H: approx. 9,500 x 6,300 x 2,500 mm Color: gray / blue Cabin: Protective cabin Equipment TRUMPF TruDisk 5001 solid-state laser Laser cooling unit Cooling unit for system Universal cutting head Multi-chamber extraction system Light barriers Electric roll-up roof Hydraulically adjustable pallet changer Protective cabin Notes on condition Machine currently not connected Test run currently not possible Operating hours could not be read out Machine was idle for approximately one year due to insolvency Connection cable to the main power supply has been cut, must be replaced Machine, cooler and extraction system should be cleaned and technically inspected Filters / maintenance should be renewed or carried out before recommissioning Machine documentation is not completely available according to the expert opinion, but the manuals can be quickly obtained digitally Bwjdpjy Tmcxjfx Apron Positive aspects Cutting head was renewed in 04/2021 Machine was in use until 2025 Very interesting basis for self-refurbishment Remarkable special price possible Sale Location: Germany Availability: immediately Price: on request / special price Condition: used, currently not demonstrable Sale from location, as inspected Errors, prior sale and technical changes reserved.

Condition: good (used), Year of construction: 2016, CNC Portal flame cutting machine Manufacturer: Sato Type: Satronik D5765 Manufacture: 2016 CNC control: Satocontrol CNC 3010 Bsdegqkc Njpfx Aprswn Track width: 5.750 mm 6 x oxyfuel torche without tracks without table without filter

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, operating hours: 57,467 h, machine/vehicle number: 30003596, degree of automation: semi-automatic, laser type: CO₂ laser, laser source manufacturer: Bystronic, laser source model: Bylaser 4400, laser hours: 57,467 h, laser power: 4,400 W, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, power: 62 kW (84.30 HP), input voltage: 1,200 V, input current: 125 A, input frequency: 50 Hz, Equipment: CE marking, Bystar 3015 laser cutting machine from Bystronic. All maintenance has been carried out correctly by Bystronic and is up to date. The machine is ready for operation and is currently in use. Includes automation with Bytrans 3015 (year of manufacture 2006). Includes cooling system. Includes filter system. Includes 5-inch and 7.5-inch cutting heads. Includes accessories such as lenses, nozzles, etc. Bwsdeyxcvfspfx Apron We have two laser machines that we need to decommission by the end of July 2026. The price is symbolic and can be significantly reduced if the buyer assumes the decommissioning costs.

Condition: new, Year of construction: 2025, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Bedpfjhv U S Nox Aprewn Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 1972, Technical details: wire diameter - max.: 12 mm wire diameter - min.: 2,0 mm control for program: Process Controler Total power requirement: 18,5 kW Weight approx.: 10,5 t dimension machine xH: 2,6 x 1,8 x 2,7 m dimensions LxWxH: Schmiermittelanlage: 0,6 x 0,4 x 0,8 m dimensions electric cabinet LxWxH: 0,5 x 1,2 x 2,1 m dimensions of coil: 2,6 x 1,8 x 2,7 m WRAIGHTING AND CUTTING MACHINE from the manufacturer Wafios-Hack Also called spring coiling machine, for the production of right and left hand tension / compression springs. Feed length 17400 mm Spring Ø 120 mm Output range: Yield 1 - 70 pieces/min. Spring Ø 25 - Ø 200 mm Bwjdpfx Aju Ic Hnspren Wire thicknesses round steel Ø 5.0 - 140 mm and square steel 5.0 - 12.5 mm Feed speed - spring length max. 42,000 mm and wire feed F1= 40 m/min. + F2= 28 m/min. + F3=20 m/min. currently mounted on the machine: 6 feed rollers for wire intake Ø 4 mm to produce the end product: tension spring wire Ø 4 mm, outer Ø 34 mm and length at 135 mm Operation via control panel, Process Controler BRANKAMP Equipment: Lubricant system Wire reel reel Switch cabinet cooler reel Optional accessories and/or spare parts see photo i.D. *

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: ABCM 1250/3, type of input current: three-phase, Gas burner for I-beams. manufacturer - Peddinghaus Germany; type - ABCM 1250/3; Bodpfxerbif Te Aprown control - Fagor; The device is connected and functional.

Year of construction: 2004, condition: ready for operation (used), - USED - CO2 LASER SOURCE Bwsdpfxoy R E Une Apron SOURCE: ROFIN DC 030 ; 3000 W WEIGHT: 570 Kg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Bodeyah R Nepfx Aprswn Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: excellent (used), For sale: Professional, heavy-duty bookbinding guillotine from Franz Pytlik Maschinen, Nürnberg. Robust cast iron construction designed for precise cutting of large formats in binderies and printing houses. The machine offers an impressive cutting width of 112 cm, enabling the processing of oversized sheets. The worktable depth is 72 cm. The knife mechanism operates smoothly and effortlessly, while the rear guide, adjustable via handwheel, allows for accurate format positioning. Specifications and features: – Manufacturer: Franz Pytlik, Nürnberg (Germany) – Type: manual bookbinding guillotine – Cutting width: 1120 mm – Table depth: 720 mm – Heavy-duty cast iron frame – Cutting lever with wooden handle – Rear guide adjustable by handwheel – Large, stable work surface – Lower shelf for sheets and tools – Knife in good condition (can be resharpened) Technical condition: Bjdpjy Nmycefx Aprown The machine is complete and fully functional. All mechanisms operate correctly. Normal signs of use – no play and no structural damage. Ideal for use in a bindery, printing house, technical workshop or model making studio.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, laser type: fiber laser, Applicable Material: metal Condition: New Laser Type: Fiber Laser Cutting Area: 3000*1500mm Cutting Speed: 0-40000mm/min Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT Cutting Thickness: 0-30mm CNC or Not: Yes Cooling Mode: WATER COOLING Control Software: Bodor Pro Place of Origin: China Brand Name: Bodor Bsdpfx Apsg Ev T Eorswn Certification: CCC, CE, GS, ISO, Sgs Laser Source Brand: IPG/MAX Laser Head Brand: bodorgenius Control System Brand: bodorpro Weight (KG): 2200 KG Key Selling Points: Tenon-and-mortise type plate welding structure bed Warranty: 3 years Laser power: 1000W Power supply: 110V/220V/380V 50Hz/60Hz

Condition: used, Internal threading machine HAGEN & GOEBEL type HG 10 Tapping machine, Vertical tapping machine Machine. No. 4462 Year of construction approx. 1980 Cutting capacity in steel M3 to M10 Cutting capacity in cast iron M3 to M16 Cutting capacity in brass M3 to M18 mm throat depth 250 mm Pinol stroke 80 mm Table size 340 x 240 mm Spindle speed 200-1000 rpm 6 steps Motor power 0.55 and 0.75 kW Mains connection 380 Volt, 50 Hz - 6 speed levels through 2 motor speeds and 3 belt levels - Thread pitch via guide cartridge - 2 guide cartridges with 1.0 mm and 1.25 mm thread pitch - Spindle holder with cone Ø 14.8 to 16 mm and 4 mm keyway - Table height adjustment with toothed rack via hand crank on the round column - Quick-change tapping chuck size 1, Ø 19 mm Bjdjupbf Dspfx Aprewn Space requirement L x W x H 850 x 550 x 1800 mm Weight 255 kg Good condition