Used Gas Cutting Machine for sale (85,821)

Condition: used, current intensivity 140 A plate thickness 1,5 mm Nsdpsxbtmdjfx Abuodd welding range CO2: 35 - 225 A welding range 30Ar+CO2: 30 - 250 A weight of the machine ca. ca. 90 Kg dimensions of the machine ca. 0,4 x 0,8 x 0,8 m

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, Capacities & Axes Ndsdpfexyk D Dox Abued Working Range (X x Y): ≈ 3,080 x 1,650 mm. Max. Sheet Thickness: Up to approx. 8 mm (Mild Steel). Traversing Speeds: X up to 100 m/min; Y up to 60 m/min. Combined Speed: Approx. 100–116 m/min. Accuracy: Positioning accuracy of ±0.10 mm.

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D Nsdjxwl Tzspfx Abujdd - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Axes X/Y/Z: 3065/1560/150 mm Nedpfxsxxkm No Abuodd Price on request.

Condition: ready for operation (used), Year of construction: 2015, Main Drive Maximum sheet thickness 3mm - 80 mm This VOORTMAN V304 was manufactured in 2015. A robust plasma cutting machine, it's ideal for precision cutting tasks. Consider the opportunity to buy this VOORTMAN V304 plasma cutting machine. Contact us for further details. Ndedpjxulfrefx Abujd Application Types Cutting

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: AC, sheet thickness (max.): 200 mm, overall weight: 7,500 kg, input voltage: 400 V, cutting speed: 300 mm/min, cutting height (max.): 230 mm, table length: 13,975 mm, working width: 2,000 mm, table width: 2,200 mm, positioning accuracy: 0.5 mm, working length: 12,000 mm, 1 plasma & 1 gas (natural) torches 200 Amps Hypertherm HD4070 plasma source 1 owner throughout all service life Good condition, still in operation Set of technical documentation (users + maintenance manuals) Filter unit GTV included Nesting program Asper license + PC included Assistance in dismantling, packing, loading (to be negotiated separately) Ndedpfxewltwaj Abusd Organizing of transportation to countries of the European Union (at separate quotation)

Year of construction: 2004, condition: used, Applicable material: Metal Empty weight: 460 kg Auction item. Plasma power source was in working condition. Not used for 3 years. Cutting current: min 80A, max 240A. Nodpfx Aboxxx Hdjuodd Max cutting thickness - 40 mm (from the edge). Sold together with box full of tips, worn parts, tools (visible in photos).

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser power: 6,000 W, The machine is powered on and can be inspected at any time. X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 100 mm Control system: ByVision Laser on-time: 17,372 hours Laser beam on-time: 3,572 hours 1. Base machine 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of delivery 1.3 Safety and guidelines 1.4 Complete documentation 1.5 Spot Control 1.6 Collision detection 1.7 Automatic nozzle centering 1.8 ByPos Fiber 1.9 Cut Control Fiber 1.10 Nozzle cleaning 1.11 Laser diode pointer 1.12 Scanning 1.13 Cutting bridge 1.14 Shuttle table 1.15 Laser source 1.16 Chiller 1.17 Tank heating 1.18 Tropicalization 1.19 Machine control system and operator interface 1.20 Uninterruptible power supply (UPS) 1.21 Condition Messenger 1.22 Maintenance Messenger 1.23 Cutting plan editor 1.24 Restart manager 1.25 System manager 1.26 Cutting parameter assistant 1.27 OPC interface cutting 1.28 Handheld operator device 1.29 Electrical connection 1.30 Compressed air (machine, laser source, chiller, extraction system) 1.31 Material specification 1.32 Cutting gas 1.33 Ambient conditions 1.34 Structural requirements 2. Accessories for the machine 2.1 Detection Eye 2.2 Special position of the control cabinet Nodpfx Aboxxic Ajuodd 3. Additional options 3.1 Part marker (printer) 4. Automation 4.1 AWS16 4000x2000 h. 9800 mm, incl. 70 raw sheet cassettes and 20 return cassettes, 3-ton cassette, total number of storage locations 258 4.2 Handling device BYTRANS MODULAR 4020 Flex 5. Value Packages 5.1 Comfort The Comfort Value Package includes: - Automatic nozzle changer with 64 positions - Parts and cross conveyor in the cutting area - Scrap carriage under shuttle table (crosswise)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm Ndodsxwl N Aspfx Abuod - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), functionality: fully functional, overall weight: 5,000 kg, total width: 4,000 mm, total height: 3,000 mm, total length: 4,000 mm, including KAPPA extraction system Type: MYKRON M 16 Serial number: 00M16.0055 Motor power: 15 kW Speed: 3000 rpm Year of manufacture: 2000 Control type: NBS 300 Production number: 1513 Voltage: 230 V Frequency: 50 Hz Connection rating: 330 VA Nedpfx Absxwnd Ajuedd FCA D-04895 Falkenberg, loaded onto truck

Year of construction: 2015, condition: ready for operation (used), Additional Equipment LN710 5" Servo Focus Head + LN010 5" High-Accuracy Lens (2.0 MPa) PC010 2-Pallet Changer TL322 4th Gas Line (Super High Pressure, 3 MPa) XXX001 Smart Junior (Software) with Training XXX002 Donaldson Dust Collector XXX003 Set-Up Kits This Mazak SUPER TURBO-X 612 MK III G was manufactured in 2015. It features a maximum cutting area of 2000 × 4000 mm and a resonator power of 4 kW. Standard equipment includes an Automatic Nozzle Changer, Auto Calibration, and a Safety Cover. Additional features like a 2-Pallet Changer and a Dust Collector enhance its functionality. If you are looking to get high-quality cutting capabilities, consider the Mazak SUPER TURBO-X 612 MK III G machine we have for sale. Contact us for more information. Application Types Nedpfx Abexqh T Reuedd Cutting

Condition: excellent (used), functionality: fully functional, Angle Cutter INDUMASCH 260 Njdpfexyl Evex Abuodd

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment sold as a working set, including: CNC plasma cutter Satronic E3500, water table 2000x6000; ventilation unit Kemper 8000; cutter Thermal Dynamics Ultra-Cut 200 In case of interest, it is possible to make demo work. Nsdpov U Uzmsfx Abuedd

Condition: good (used), Year of construction: 2023, operating hours: 5,001 h, functionality: fully functional, X working area max.: 3000 mm Y working area max.: 1500 mm Ndjdpoxxbwxefx Abued Control: TRUMPF Control based on Rexroth IndraMotion MTX Machine: - Closed machine frame - Hybrid axis system - Linear magazine with 24 slots for clamps and tools - Hydraulic clamps (3 pieces) - Drives with maintenance-free three-phase motors - Repositioning with programmable hold-down device - Foot pedal for clamp closing - Parts chute on the right Punching Head: - Delta Drive - Rotatable mono-tool holder - Programmable hold-down position - Tool length compensation - Punch lubrication spray system - Punch slug extraction - Forming function - Stroke counter for punches Control: - TRUMPF Control based on Rexroth IndraMotion MTX - Touch panel with 19" TFT color display - Touchpoint - Programmable cutting gas pressure - Automatic shut-off - Remote support interface - Program management - Production planning Data Transmission: - USB interface - RJ-45 network interface - Central Link - Online Update Manager Safety: - CE marking and EC Machinery Directive - Dual-beam safety light curtain Extended Standard Equipment: - 1st positioning pin (inside right) + Brush tables + MultiTool + Thread forming with thread counter + Thread-former breakage monitoring + Lubricant level monitoring + Marking/rapid beading + Deburring and rolling technology + Adaptive stroke calibration + Die lubrication spray system + Smart Punch Monitoring + Parts flap on the left + Parts conveyor belt for parts flap left + Collection tray for parts conveyor left + Sensor for parts chute + Parts conveyor for parts chute right + Additional clamp + 4x individually openable clamps + 4x height-adjustable clamps + Automatic clamp closing loading sensor system + Optical loading sensor + Automatic repositioning movement to compensate for loading tolerance + Repositioning device for DeltaDrive + Vibration-dampened installation + Chip conveyor with tilting bin + Machine status light + Warpage detection + Wireless Operation Point SheetMaster Compact 3000 x 1500 (AK05): - Loading station with spreading magnet for sheet separation - Suction frame - Vacuum sensors - Double sheet detection - Unloading cart for residual grids and microjoint sheets - Second operator station for loading and unloading + Compact setup for light grid and reference point system + Peeling system SortMaster Compact: - Machine-integrated automated small part removal - Suction frame for unloading good parts up to 600 x 400 mm (X x Y) - 2 suction bars (each suction cup individually controllable) - Unloading area 600 x 800 mm - Vacuum sensors for the suction circuits + X-axis extension - Extension of the unloading area to 1200 x 800 mm

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Ndedpfxjxwlmuj Abued Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: new, Year of construction: 2024, Our new generation Double Shaft Multi Slitting Machine CML/2/250 has entered the service of our sector... Self-adjusting feed speed according to the cutting height... Ability to install saws of different diameters thanks to the up-and-down movable saw shaft Automatic positioning according to cutting height Adjustable cutting height from 20 mm to 250 mm ----- Nedpfxottlame Abusdd Our new generation Double Spindle Multiripsaw Machine CML/2/250 has entered the service of our industry... Self-adjusting feed rate according to cutting height... Ability to mount saws of different diameters thanks to the up-down movable saw spindle Automatic positioning possibility according to cutting height Adjustable cutting height from 20 mm to 250 mm

Condition: ready for operation (used), Year of construction: 2011, This MicroStep EasyCut 6001.25PrGB was manufactured in 2011. It is a CNC plasma/oxyfuel cutting machine designed for industrial, heavy-duty applications. Features include a large working area of 6000 × 2500 mm, dual-side driven gantry, and compatibility with CAM software like mCAM and AsperWin. It supports up to 6 oxyfuel torches and offers options like automatic height control. Note: the gas console is defective. Contact us for more information about this machine. Application Types Cutting Ndjdpfxjxuayws Abujd

Condition: used, Punching machine for, e.g., slipcases with many punching dies Nsdpfx Asxw N Ntsbusdd

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, Set includes two thread cutting machines No.1 - REMS UNIMAT 75 (1985) equipped with a set of cutters and heads as per the attached PDF. Version with hydraulic vice. No.2 - REMS UNIMAT 75 (1992) backup machine, partially non-functional due to removed contactors, to be repaired/commissioned. Ndjdpoxyi E Tofx Abued

Condition: good (used), Year of construction: 1999, operating hours: 52,324 h, functionality: fully functional, X working area max.: 1270 mm Y working area max.: 1270 mm Control: Bosch Type 3 Basic Standard equipment: - Robust C-frame - Safety light barriers - Coordinate guide with integrated linear magazine - 2 clamping claws - Automatic tool changer - Automatic repositioning - Tool length compensation - Forming capability - Mono tool holder with 360° rotation for all tools - Programmable hold-down device - Multitool drive - Punch slug extraction - Brush tables - Part chute 200 x 200 mm, sorting of parts into 2 containers - NC-controlled, digital, maintenance-free three-phase drives - Network interface RJ34 - 3.5" floppy disk drive - TOPS 2000 graphical programming Nsdpfoxxbdlsx Abusdd - Online diagnostics via modem - Operating manual + Vibration-damped installation + Multitool + Thread forming + Start post

Condition: used, functionality: fully functional, Year of construction: 2015, Machine - Enclosed machine frame - Automatic pallet changer in longitudinal direction - Torque drive in combination with linear direct drives - Enclosed beam guidance using fiber optic cable (LLK) - Machine cooling unit (water-air) - Integrated control cabinets with interior lighting - Power supply to TruDisk via the machine - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Oil spray device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser Ndsdsxw Uryepfx Abusd - Solid-state laser TruDisk with 1 fiber optic output - Laser cooling unit (water-air) - Excitation via pump diodes - Laser power control Cutting Unit - Universal cutting unit with fully adaptive lens system - Single cutting head strategy - Protective glass against lens contamination - Protective glass condition monitoring - ControlLine: height control and sheet metal edge detection Control - Advanced workshop programming (TruTops via network access) - Fast repeat production - 17" touch color screen - Integrated technology data - Automatic shut-off - Programmable selection of cutting gas/pressure - ContourLine - Microweld - FastLine - FlyLine - AdjustLine - Teleservice via Internet - Integrated e-shop Data Transfer - USB interface - RJ-45 network socket Safety - CE marking - Light barriers - Multi-chamber extraction system - Compact dust extractor - Machine enclosure with certified viewing window (right door) - Roll-up roof Special Equipment: • 3001 on TruDisk 4001 • Extended pallet extraction • Dust protection device panel • Viewing window left • Side viewing windows right • Storage interface • Brightline Fiber • Titanium cutting package • Brass cutting package • Copper cutting package • Nozzle changer

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 220604 € 3573.99 € 189100 € 6 kW Wechseltisch 20 mm 15 mm 20 mm 10 mm 12 mm 3.048 x 1.530 mm 3060 mm 1530 mm 140 mm 3.048 x 1.524 mm 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm Special campaign until 23.12.2025 Fiber laser HESSE HD-FO made by DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The shuttle table is positioned at the front, making this system ideal for customers who do not have sufficient space for classic longitudinal positioning. Optionally, the HD-FO can also be equipped with a manually extendable table. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Nodpewirmzjfx Abuedd Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines OPTION: suction unit with filter manually extendable table Further options as Durma cloud on request.

Condition: ready for operation (used), Year of construction: 2015, This KOIKE PNC-12 EXTREME plasma cutting machine was manufactured in 2015. It features a robust CNC control system and an effective cutting area of 1500 x 3000 mm. Capable of handling a maximum cutting thickness of 50 mm and equipped with rapid travel speeds up to 4000 mm/min, it ensures efficient operation. Consider the opportunity to buy this KOIKE PNC-12 EXTREME plasma cutting machine. Contact us for more information about this machine. Application Types Cutting Ndsdpfx Ajxr Rwzjbusd

Condition: new, neu ca. 8 Wochen ab Auftragse Türkei 208645 € 3386.88 € 179200 € 6 kW Wechseltisch 25 mm 15 mm 20 mm 10 mm 12 mm 28,5 kW 3060 x 1525 mm 3060 mm 1525 mm 125 (275) mm 3084 x 1524 mm 240 kg/m² 2160 kg 100 m/min 100 m/min 141 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 25 s Special campaign until 23.12.2025 Fiber laser HESSE HD-FN made by DURMA The HD-FN has two tables which are automatically switched alternately to enable simultaneous cutting and loading/unloading. The shuttle table is positioned longitudinally, which results in the best possible accessibility for optional loading and unloading systems. Control, laser source and cooling are integrated into the machine. The cutting head has automatic focus adjustment. The system consists of the following components: Shuttle table (positioned longitudinally for best possible accessibility for optional loading and unloading systems) Nodpjwiq T Tsfx Abujdd Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source CAD/CAM software for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Central lubrication Slug box Working area lighting Multi-chamber suction system Light barrier protection for the changing table Remote maintenance access Equipped according to CE guidelines OPTION: Extraction with filter unit

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 194845 € 3160.08 € 167200 € 6 kW Manueller Tisch 20 mm 15 mm 20 mm 10 mm 12 mm 3.048 x 1.530 mm 3048 mm 1530 mm 125 mm 3.048 x 1.524 mm 127 kg/m² 90 m/min 90 m/min 127 m/min 14 m/s² +/- 0,05 mm +/- 0,05 mm 6600 kg Special campaign until 23.12.2025 Fiber laser HESSE HD-FO made by DURMA The HD-FO is our compact entry-level model. Control, laser source and cooling are integrated into the systemto keep the overall dimensions as small as possible. The manually extendable table is moved out of the side of the machine for loading and unloading. The cutting head has automatic focus adjustment. This makes the system a particularly economical, fast and very easy to operate production machine. The system consists of the following components: Manual loading and unloading table Encapsulated cutting room with protective glazing CNC graphic control with touchscreen Laser source Brilase Premium DRM-8 F150 Cutting head with automatic focus adjustment Integrated cooling unit for cutting head and laser source Ndedpfxewiq Dxs Abujd CAD/CAM software LANTEK for programming including autonesting Positioning laser Sheet check system (automatic detection of sheet position and dimensions) Automatic nozzle cleaning Slug box Working area lighting Multi-chamber suction system Remote maintenance access Equipped according to CE guidelines DIMENSIONS: Lenght of Guiding Machine: 5.600 mm Width of Guiding Machine: 2.700 mm Height of Guiding Machine: 2.130 mm Height of Guiding Machine when loading door are open: 2.725 mm Length of exhausting unit: 2.500 mm Width of exhausting unit: 1.400 mm Dimensions according to layout plan 8.500 x 5.500 mm OPTION: exhaust unit with filters shuttle table for simultaneous loading/unloading and cutting to reduce the secondary processing time Further options as Durma cloud on request.