Used Gea for sale (204)

Condition: used, 325L bowl capacity blad shaft motor power 120 kW/306 A (AC) Bowl motor power 3.7 / 4.4 kW - 8.2 / 8.8 A Ejection motor power 1.5 kW - 3.5 A Hydraulic pump motor power: 2.2 kW - 5.0 A blade shaft fan motor: 0.3/1.2 kW - 1.5/4.4 A Other: 3 kW - 8 A Total power: 133 kW - 337 A Temperature measurement Operating voltage: 400 V / 50 Hz Control voltage: 24 VDC / 230 VAC Control: Cut Control Pro 2-speed turntable Credpfxjz Imu Es Ai Ssh Product ejector (right) Knife cover Bowl cover Automatic lubrication Loader for Eurobins 200L (left) Weight: ± 5.390 kg Water connection 1" / 3-4 bar Air connection DN6 / 6 bar For dimensions, see the attached PDF.

Condition: used, all stainless steel suitable for thermal oil heating heating separately adjustable in two areas adjustable speed belt width ± 1.000 mm total length ± 9.400 mm canopy with electric hoists Suitable for steam injection (to heat up and to improve product yields) suitable for CIP cleaning system outside dimensions (l x w x h): ± 12.609 x 2.098 x 3.400 mm with extra outfeed conveyor: (l x b): ± 2.000 x 1.000 mm in good condition Fully mechanically overhauled: New bearings, chains, seals, slide bushings, gears, … All (motor-)driven transmissions overhauled or replaced with new ones Hood and tank completely re-insulated New grill belt, standard dimensions for snack products All wear-sensitive components replaced or fully overhauled General cleaning, overhaul, and inspection of the construction Fully electrically overhauled + update of electrical cabinet and control system: All electrical components and cables replaced with new ones Conventional push-button operation with Jumo temperature PID controller New electrical diagrams (E-Plan) New sensors Coding/labeling of components and cables New thermal oil control station : Pneumatically operated 3-way thermal oil control valves (A, B, AB) By-pass circuit Crsdpfez Harzox Ai Sjh Thermal oil filters Bellows-sealed shut-off valves with handwheel Temperature reading Pressure measurement Stainless-steel frame (protective side panels for hot piping and components) Stainless-steel piping and flanges (for the thermal control station only)

Condition: like new (used), Year of construction: 2013, This floor-standing machine is designed for mixing a large number of dry products. Thanks to the planetary motion of the mixing tool, intensive and homogeneous mixing is achieved. Cjdpfx Aijx Antus Serh The system consists of a stainless steel vessel—material 316L, mirror-polished, Ra < 0.8 µm—and a stainless steel housing, in which the vessel lid with the integrated mixing units and drives is installed. The mixing vessel has a capacity of approximately 90 liters (usable volume approx. 30 to 60 liters) and is placed and clamped onto two arms. The mixing material is filled in, after which the vessel is raised hydraulically, causing the mixing tool to immerse into the product. The mixer is equipped with a 45° spiral-shaped stainless steel mixing tool; the speed can be regulated via a gearbox. The mixing speed is adjustable—48, 82, 135, and 231 rpm. Vessel discharge is performed via a centrally located bottom outlet. Operation and control, including recipe and batch management, is performed via an operator panel on a separate stainless steel control cabinet. The operating language is English. The system is prepared for use in ATEX-rated (explosion-protected) areas. Electrical configuration: 230/400V, 3-phase, 50 Hz, IP55 Space requirement: 90 x 130 x 235 cm Weight: approx. 850 kg

Condition: used, functionality: fully functional, machine/vehicle number: 1674938, We offer this used GEA Westfalia Separator CA 220-010 two-phase decanter, year of manufacture approx. 1985. Type: CA 220-010 Machine number: 1674938 Year of manufacture: approx. 1985 Bowl design: cylindroconical with screw conveyor for solid/liquid separation Bowl diameter: 220 mm L/D ratio: 2.65 Screw drive: Cyclo gearbox Crsdsyrdlajpfx Ai Soh Connection voltage: 3 phase 400 VAC Connected load: 15 kW If you have any questions or require further information, please send us a message or call us.

Condition: used, Consisting of: “Thermopac - WANSON” thermic oil installation Type 200B 10 FT container natural gas burner power: 233 kW 3 x 400 V, 50 Hz 7.5 kW dimensions (L x W x H): ± 3,000 x 2,450 x 2,600 mm + Thermal oil pump Bathyscaphe Flue gas exhaust stack + “GEA-CFS” fryer Type BR 6000/600 all stainless steel suitable for thermal oil heating Crjdpfx Aszzwmhji Sjh infeed height : ± 900-950 mm outfeed height : ± 1.150 mm max. oil level above the belt : 120 mm suitable for fire protection with top hold down belt Oil circulation system net belt length 6.000 mm net belt width 600 mm adjustable speed sediment removal system filter lifting unit with electrical hoists dimensions (l x w x h) : ± 8.700 x 2.200 x 3.800 mm “Saval” fire suppression system + Paper filter Type OMR 120-60 50 Hz - 400 V 4.5 kW 525 kg dimensions (L x W x H): ± 2.800 x 1.700 x 2.200 mm + Cooling conveyor with ambient temperature all stainless steel variable speed 50 Hz, 400 V 2.61 kW net conveyor length ± 6.000 mm net conveyor width ± 900 mm wire mesh belt (3 mm) dimensions (L x W x H): ± 7.600 x 1.700 x 2.000 mm

Condition: used, all stainless steel electrically heated, 90 kW net belt length 3.000 mm net belt width 600 mm frying time min/max : 25/250s Credoz Harhepfx Ai Soh with lower and upper belt sediment removal system lifting unit with electrical hoists dimensions (l x w x h) : ± 6.092 x 2.365 x 1.985 mm suitable for fire protection weight : 2.750 kg oil level control circulation pump with Teflon infeed belt

Condition: used, Year of construction: 2002, power: 90 kW (122.37 HP), The CFS ChunkMaster 400 industrial grinder is a heavy-duty machine designed for meat processing plants that require exceptional performance, consistent raw material particle size, and the highest quality finished product. The machine is based on the proven Wolfking/CFS grinding platform, later continued as part of the GEA product portfolio, which is why the ChunkMaster 400 enjoys an excellent reputation in the industry for its reliability, durability, and low maintenance costs. Technical Specifications of the CFS ChunkMaster 400 Meat Grinder Manufacturer: CFS Model: ChunkMaster 400 Equipment type: Industrial meat grinder Year of manufacture: 2002 Grinding system diameter: Ø400 mm Power supply: 400 V, 3-phase, 50 Hz Current draw: 162 A Power: 90 kW Dimensions: What is the CFS ChunkMaster 400 meat grinder used for? The ChunkMaster 400 is designed for grinding a wide range of meat raw materials: beef, pork, poultry, fat, and trimmings, as well as fresh, chilled, and slightly tempered meat. The machine is well-suited as part of a raw material preparation line for the production of sausages, ground meat mixtures, burgers, pet food, and convenience products. The large feed hopper, with a diameter of Ø400 mm, allows for the processing of significant quantities of raw material while ensuring gentle handling of the product and minimal temperature increase during grinding—which directly impacts the quality and shelf life of the finished product. Design and Cutting System The ChunkMaster 400 grinder is equipped with a robust stainless steel frame, a durable feed auger, and an industrial gearbox designed for continuous operation in large meat processing plants. The raw material feeding system ensures a smooth and uniform product flow, minimizing compression—thereby preserving the natural structure of the muscle tissue and resulting in a higher-quality final product. The machine can be configured with various Unger cutting sets, allowing for raw material particle sizes ranging from coarse pre-grinding to fine grinding, depending on the blades and screens used. Key advantages of the CFS ChunkMaster 400 grinder Cedpfezmgqtsx Ai Sjrh Large grinding system with a diameter of Ø400 mm, Exceptionally high production capacity, Gentle handling of raw materials, Minimal temperature increase during grinding, Excellent preservation of meat particle structure, Industrial-grade, heavy-duty gearbox and hygienic stainless steel construction, facilitating access for cleaning and maintenance, Easy access to replacement parts; screens, cutting blades, and drive belt included One of the greatest advantages of the ChunkMaster 400 grinder is the continued availability of replacement parts. Many mechanical components remain compatible with later CFS MaxiGrind and GEA MaxiGrind series, and independent manufacturers continue to offer OEM replacements—which significantly facilitates the long-term operation and servicing of this machine.

Condition: like new (used), Cutter CFS GEA CutMaster 500 VACUUM Csdpfx Asyn Dy Noi Serh After capital renovation 3 months warranty for parts

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer this GEA COMAS LTH Type 400 automatic cake production line, manufactured in 2018, plus an ABRIGO ultrasonic cutting system, also manufactured in 2018. Crjdpfxjzk Hdho Ai Sjh For sale is a complete GEA Comas line for the production of layered cakes, manufactured in 2018, consisting of: LTH main unit, TRA tray transfer, DRV and DPP cream and syrup depositing/metering stations, DVB unit, cream lifter-tilter, and syrup unit. Included: Abrigo "Flexcut Plus" ultrasonic cutting system for clean portioning, without deforming the cream/glaze. Functional industrial equipment, in very good condition, with minimal wear – the line has only been in operation for a short time, with few hours of use. Price upon request. For details or to arrange a viewing, please contact us via message or phone. If you have any further questions or require more information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2009, Overview GEA Procomac Opera palletizing unit from 2009, sold as a complete end-of-line group: low-level infeed palletizer with all pallet conveyors, pallet magazine, mother pallet station, Robopac stretch wrapper and Logopak pallet labelling. The Opera is a low-level infeed palletizer for low to medium production capacities, with automatic changeover for different pallet patterns and pallet sizes. Still in production in Germany until October 2026. Technical data - Year of manufacture: 2009 - Design: low-level infeed palletizer - Changeover: automatic, for different pallet patterns and pallet sizes - Output range: low to medium production capacities - Handled at the site: shrink-wrapped PET bottle packs - Pallet handling: infeed and discharge pallet conveyors, pallet magazine, mother pallet station - Machine guarding: mesh safety fencing with access gates around the cell Scope of delivery Cedpfxsz Dxtxe Ai Serh - GEA Procomac Opera palletizer - Complete pallet conveyor system - Pallet magazine - Mother pallet station - Robopac stretch wrapping machine - Logopak pallet labelling system Condition Still installed and under power, in production until October 2026. Inspection under power by appointment. Availability From 1 October 2026. Location: Germany.

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: - Grey cast iron table, surface ground and hardened - Spindle adjustment via handwheel and scale on the front - 4 speeds with electric speed display - External spindle lock - Milling stop with fine adjustment on both sides + central adjustment - Motor brake - Extraction ports top + bottom - Spindle: 30 mm - Motor: 4 kW - Table dimensions: 1100 x 700 mm - Spindle speeds: 2900/4400/6000/8000 rpm - Vertical spindle adjustment 220 mm - Table opening 300 mm - Effective length of milling spindle: 1890 mm - Extraction connection: 150/120 mm - with 4-roller feed mechanism Weight: 600 kg Csdpfx Aezk Nk Rei Sorh Availability: at short notice Storage location: Röllbach

Condition: used, all stainless steel Csdpfx Ajz Eilboi Sorh with top hold down belt water circulation net belt length 8.000 mm net belt width 900 mm adjustable speed lifting unit with electrical hoists dimensions (l x w x h): ± 9.000 x 1.800 x 3.850 mm

Condition: used, net belt width ± 600 mm total electrical power 33 kW thermal connection: NW32 2x5 tiers product height: ± 100 mm cooking time min/max : 4-40 min max. temperature: 200°C automatic elevator Codpez E H Rzsfx Ai Sjrh with belt wash system suitable for CIP-cleaning suitable for steam injection (heating and product yield): 4-8 bar, connection: NW 40 turning to the left

Condition: good (used), Hermetic hydro clarifier, complete, tool set, 30 kW motor power, with documentation and overhauled. Price: 35,000 euros. Crodpfsy Rtlzsx Ai Ssh

Condition: used, all stainless steel 3 tiers nett belt length ± 5.800 mm nett belt width ± 940 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 7.200 x 1.400 x 2.900 mm + Evaporator "Goedhart B.V." Type LLK.s 411m² Crjdpfoz Ep Ayjx Ai Seh manufacturing number: PJV100282 Year of manufacture: 2010 Capacity: 135 dm³ Refrigerant: NH3 Weight: 770 kg, Working pressure: 22 bar Test pressure: 32 bar Overall dimensions including cooling panels and stainless steel door: 7.500 x 2.700 x 3.300 mm

Condition: used, Year of construction: 1997, functionality: fully functional, GEA Westfalia MSD 140-96-076 Whey Clarifier Year: 1997 22,000L Credpfozy Rlbox Ai Ssh

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Cedpjx Hazusfx Ai Sjrh

Year of construction: 2010, condition: ready for operation (used), A high-pressure homogenizer GEA is available. Stroke: 100mm, plunger diameter: 80mm, max. operating pressure: 200bar, throughput capacity: approx. 14000l/h, max. product temperature: 90°C, max. process temperature cleaning/sterilization: 140°C, machine dimensions X/Y/Z: approx. 2250mm/1600mm/1600mm, weight: approx. 3500kg. Including control cabinet and spare parts. The unit has new gearboxes. Documentation available. An on-site inspection is possible. Crsdpfx Aisyx H Huj Sjh

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 24 A, Excellent condition brine injector – complete steaker line (type TDC-400), brine cooler and brine filter, little used, fully functional. 3-phase connection, 12 kW, 24 A, 380 V. We speak English, German, and ex-Yugoslav languages. Contact also possible via WhatsApp. Crodpfxeyfgwlj Ai Soh

Condition: used, GEA crumb master. 600 wide belt. As new condition can be supplied with a wet coater. Csdpfx Ajz D Hqloi Ssrh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, GEA KOPPENS PRF 600 PerFormer | Plate former for burgers, nuggets, and convenience food products Manufacturer: GEA Koppens / Convenience Food Systems (CFS) Model / Type: PRF 600 PerFormer Serial number: 712 Year of manufacture: 2001 Power supply: 400 V | 50 Hz | 3 Ph | 60 A Power: 30 kW Working width of the belt: 600 mm Machine weight: 2850 kg Csdszkv Nmepfx Ai Serh The GEA Koppens PRF 600 PerFormer is a high-performance, industrial plate former designed for use in automated production lines in the meat, fish, convenience food, and vegetarian industries. This machine is an industry standard, dedicated to the precise shaping of products such as burgers, nuggets, meatballs, fish sticks, and cutlets. Thanks to its advanced raw material distribution system, the former guarantees perfect consistency in weight and preserves the fiber structure of the processed material. The core of the machine is a proven plate forming mechanism with a working width of 600 mm, which works in conjunction with a large loading hopper, enabling the achievement of the highest production rates required in industrial processing plants. The operation of the PerFormer former is characterized by minimal raw material loss and a uniform compaction level of the final product, which directly translates into optimized production costs.

Condition: excellent (used), Year of construction: 2022, operating hours: 800 h, Equipment: documentation/manual, Top specification forming coating and frying line. B ought new in 2022 and only used for a few months. Fryer 6m x 650mm has 800 running hours. Credpfx Ajzii N Doi Sjh

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, Equipment: compressor, Manufacturer: GEA Wiegand Codpfxezzyuue Ai Serh Year of manufacture: 2001 Infeed capacity: up to 40,000 kg/h Water evaporation rate: approx. 10,000 kg/h Steam compressor - Manufacturer: PILLER - Motor power: 200 kW - New motor installed in 2017 - Includes a new spare motor Previously used for whey processing Control system not included Without preheating (heat exchanger) Condition: very good, fully functional

Year of construction: 2010, condition: used, Manufacturer : GEA Niro Soavi S.p.A. Model : NS 2006 H Version : ARIETE Year : 2010 Type: Laboratory piston homogeniser Execution : SANITARY Special features: FDA-compliant + electropolished (Ra < 0.5 µm) + cGMP-compliant   Number of Plungers: 2 Plunger material: CERAMIC Codpjyyq E Dsfx Ai Ssrh Plunger diameter: 10 mm Plunger stroke: 40 mm No. of Stages : 2 Type of Control : HANDWHEEL Maximum pressure: 1500 bar Maximum viscosity: 500 cP Maximum temperature: 140 °C   Main motor power: 5.5 kW Speed: variable Min. flow rate: 17.5 L/h Max. flow rate: 35 L/h   Heat exchanger with no cross-flow Power cabinet + control panel Complete technical file

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0 Codpsvhctwjfx Ai Sjrh