Used Gea for sale (188)

Condition: excellent (used), Year of construction: 2013, GEA Modular Membrane Filtration System up to 6.25 m³/h, in excellent condition and barely used. This equipment was used for just two validation batches, and after that has been in storage. It is currently equipped with spiral-wound nanofiltration membranes but other membrane types can be used for microfiltration (MF), ultrafiltration (UF), etc. The complete original manufacturer documentation is included in digital format, comprising the operating manual, process flow charts, wiring diagrams, certificates, inspection reports, and other relevant technical documentation. The system is designed to process a maximum volume of approximately 100 m³ of product (feed) per day. An average feed flow rate of approximately 4 to 6 m³/h is assumed under the “16/4” or “20/4” operating regime (Explanation: “20/4” corresponds to 20 hours of filtration operation / 4 hours of CIP cleaning). If, at a later stage, the daily processing capacity needs to be increased or the installed membrane surface becomes insufficient due to unforeseeable fouling effects, two empty slots are provided for retrofitting additional membrane housings. The piping and recirculation pump are already prepared for such an expansion. The membrane unit is designed for a semi-automatic cleaning-in-place (CIP) procedure. The system includes the required valves for internal circulation of cleaning solutions, followed by system flushing. Specifications - Feed volume: 400 - 500 m³/week - Feed volume: 80 - 100 m³/day - Feed volume: 4.0 - 6.25 m³/h - Production time: 16 - 20 h/day - Operating temperature: 35 to max. 65 °C Consumption - Power supply (pumps): 3 x 400 V, 50 Hz - Installed power: approx. 65 kW - Electric power consumption: 53.1 kW/h - Compressed air: 6 bar, oil- and water-free - Steam: 6 bar (max.) - Seal water: approx. 75 - 150 l/h - CIP water: approx. 19 m³/h Iiodpfx Aovhctwsn Dsa - CIP water per cycle: 6 m³/CIP - Steam consumption per cycle: 100 kg/CIP - CIP chemicals: (e.g., membrane cleaner, acid, alkali, preservative, biocide) Limits - Max. operating temperature: 65 °C - Max. operating pressure: 30 bar - pH range for feed water: - Maximum: pH 10.0 - Minimum: pH 2.0 Cleaning-in-Place (CIP) - Max. temperature: 85 °C - Max. pressure: 10 bar - pH limits (for up to 30 minutes): - Maximum: pH 10.5 - Minimum: pH 2.0

Condition: used, Year of construction: 1990, Washing tunnel for cleaning the outside of kegs. Cleaning is carried out with water heated to 60 °C. A steam or hot water-heated bath is located in the lower part of the external washer for this purpose. Equipped with adjustable spray nozzles and a brush station. To prevent excessive water carry-over, the flap doors at the inlet and outlet close under their own weight. With device for discharging of washed-off labels. Additional title: Keg spraying and keg brushing Max. capacity: 300 Kegs/h Capacity keg filling plant: 110 Kegs/h Voltage: 220/380 V Frequency: 50 Hz Length: ca. 2200 mm Ijdpfx Ajxwy H Ajn Djia Width: ca. 1500 mm Formats: 30-litre and 50-litre kegs, EU format, with PU jacket Features: Spray jets, high-pressure pump, brush station, label discharge

Condition: excellent (used), Year of construction: 2012, Large grinder for fresh meat, these models were previously known as Wolfing C250UNI. Excellent condition. With de-gristle unit. Ijdevvn Icopfx An Dsia

Condition: not inspected (used), 3m x 1000mm thermal oil fryer, direct from closed snack food factory where it was frying samosas and onion bhaajis. Complete with top hold down belt and teflon infeed. Machine was removed from the factory when it closed in 2015 and has been in storage ever since. Iodpfxeh Uhamj An Dsia

Condition: used, conveyor belt width: 1,000 mm, GEA CFS Koppens inline fryer, heated by thermal oil. 3m frying length, 1000mm wide belt. Auto canopy hoist, top hold down belt. Older machine, has been in storage for a long time, previously used for frying onion bhaajis and pakora. Iiedox Av Dujpfx An Dea

Condition: like new (used), Year of construction: 2021, Almost brand new condition. Bought in 2021 and only used for a few months before factory Bankruptcy. Great saving on new price. Iedpfx Anex Hazuo Dsia

Condition: good (used), GEA AutoGrind 200 grinder for fresh and frozen meat. Currently missing both screws. Can be sold ’as is’ or complete. Iiedpsx Alncofx An Dja

Condition: good (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: P281560766/3, power: 2.35 kW (3.20 HP), Single outlet roof top air coolers in good condition including their fans. AVAILABLE the following codes : DEA 093DL-DEB 081D-DEB 094DL-DEBE 072D-DEBE 081D-DEBE 082D-DPA 032S-DPA 041S-DPA 042S-DPA 043S Iiedpfx Aeul U Ausn Dja The posted price is per piece.

Year of construction: 2019, condition: like new (used), Condition: As good as new Container has not been in use. Was ordered for a large project, but never put into operation. perm. operating pressure: 22 bar volume flow: 490 m³/h empty weight: 2100 kg refrigerant: R717 dimensions: 2.200 x 1.180 x 1.940 mm frequency converter: Danfoss VLT with 132 kW Iiodpfx Aok Sgwaon Dsa Accessories: 1 x blowdown tank Aprovis 18180678-MSK 3 x thrust drive ARI Premio Plus 2G 2.2 kN 5 x gate valve Ari 1.0619N 3 x gate valve Ari JL1040 2 x shut-off valve KSB nw-6150BQ0465 3 x diaphragm valve KSB SISTO-16 TWA 1 x turbine volume measuring part / heat meter MWN130-NC 3 x KSB amri ACS 02ACCNY005 shut-off valve 3 x strainer ARI 6 x gate valve Ai Ziva-G 1.4581

Condition: used, Year of construction: 2015, Manufacturer: GEA Type: single wall tank Year : 2015 Capacity : 290 L Iodjx R A T Ijpfx An Deia Diameter : 61 cm Depth : 108 cm Temperatures: min 0°C – max 90°C Load cells: 4 units -> Sartorius PR6211/22 01 (max 200kg)> Endress+Hauser Liquiphant M vibrating fork level sensor / detector

Condition: used, Quantity available: 14 units Manufacturer: GEA Tuchenhagen Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Ijdpfsx R A S Rex An Dsia Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7111 TM1.P2AAL/81/52 Isdpfx Asx R A S Djn Doia Nominal diameter : DN 25 Setting air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 2 units Manufacturer: GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7991 TM15P2AAL/81/52 Nominal diameter: DN 25 Control air pressure : min 4,8 bar / max 8 bar Iijdpox R A Swjfx An Doa Fluid pressure : 10 bar max

Condition: used, Quantities available : 4 units Manufacturer : GEA Tuchenhagen Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81/52 Nominal diameter : DN 65 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L Iisdpfxex R A Sqe An Dsa

Condition: used, Quantity available : 1 Manufacturer: GEA Tuchenhagen Iiodpfxox R A Ske An Dja Type : Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 80 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available: 1 unit Classification: ATEX Manufacturer: GEA Tuchenhagen Model T-smart 7 / 7881 SES.P22EEE/43/65 Iiodpfx Ajx R A Sdsn Dea Nominal diameter : DN 80 Type : Butterfly valve Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Iiedpfx Ansx R A R Ts Dea Type: Butterfly valve Model T-smart 7 / 7881 TM1.P2AAL DN : 40 Set air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L

Condition: used, Quantity available : 1 unit Manufacturer: GEA Tuchenhagen Type : Butterfly valve Ijdpfx Ansx R A Ryo Dsia Model: T-smart 7 / 7881 TM1.P2AAL/81 Nominal diameter : DN 50 Control air pressure : min 4,8 bar / max 8 bar Fluid pressure : 10 bar max Stainless steel : 316 L  

Condition: used, Year of construction: 1999, GEA Courtoy R 090/18 rotary tablet press with electrical cabinet R090XT13 Number of positions / stations: 18 Punch type: EU D Max. compression force: 100 kN Max. precompression force: 10 kN Production speed: 15,900 – 79,200 tablets / hour. Ø Max. tablet diameter: 25 mm Outer diameter of dies: 56 mm Isdpfxex R Amhe An Djia Die height: 23.81 mm Ø Punch body diameter: 25.35 mm Height of the press: 1955 mm Net weight: 1800 Kg Full technical file. Feeding device / Loading hopper / Discharge chute / Allen Bradley control system. Small size. Equipment in excellent condition and low operating hours.

Condition: like new (used), Year of construction: 2012, The refrigeration unit is in new condition with storage marks. Weight: 400 kg Height: 205 cm Width: 130 cm Iisdpfxsmmdq Tj An Dea Depth: 65 cm

Condition: used, Year of construction: 2009, 2 GEA NH3 refrigeration compressors with frequency control (from a refrigeration system with max. 180 kW) Capacity: 145 m³/h each Additional title: Refrigerant NH3 Iiedpjxzqtnsfx An Dsa Capacity: 145 m³/h Power: 37 kW Weight: 132 kg Position: Screwed onto concrete base Features: 2 x compressors: 145 m³/h, 26 kW with frequency converter, 37 kW rated power

Condition: used, Year of construction: 1988, from training workshop, public authority pivotable for long workpieces used, in good condition machine cleaned, overhauled greased, function tested, trial run Iijdpfxjwbi Exs An Doa manufacturer Gea type Kapre 3000 year of manufacture 1988 one-sided from below press cylinder 1 heating rail working length 3000 mm pneumatically operated mobile New parts: mist lubricator compressed air lines 2 pot seals for press cylinder 2 pot seals for clamping cylinder plug for heating rail Storage location 97447 Gerolzhofen, loaded free on truck, unpacked Handover in current condition as inspected, without warranty or liability

Condition: used, Year of construction: 1980, used, good conditionmake GEA-Casadeitype DE 410year 1980machineNr. 80-12-72planing width approx. 410 mmtable length infeed approx. 1200 mmtable length outfeed approx. 1000 mmjointing bartable lips slotted/low noisenumber of knives 4 piecessuction connection D 120 mmspace requirement approx. 2300 mm x 800 mm x 1000 mmstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as inspected,without warranty and guarantee Iiedpfovwfxzex An Doa

Condition: used, Year of construction: 1989, Used machine Year of manufacture: 1989 Equipment and technical data: - Planing width: 410 mm - 4-knife shaft - Motor power: 3 kW - Shaft speed: 5,000 rpm - Shaft diameter: 120 mm - Feed speed: 8 + 14 m/min - Maximum planing height: 230 mm - Extraction port: Ø 150 mm - Surface table: two-piece, foldable, synchronized on both sides - Fence: tiltable, angle with magnifying display - Table height adjustment: via double universal joints, handwheel with scale display - Thickness planer: with outfeed roller, spring-mounted, feed rollers driven synchronously Dimensions: 2,040 × 1,180 mm Weight: 560 kg Availability: short-term Isdpfexzl Adjx An Djia Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, The GEA CFS Autogrind 280 is a powerful industrial grinder built for high-performance applications, particularly in meat processing. Designed to work with frozen blocks up to -25°C Key Features: Enhanced Power: The 117 kW motor delivers increased grinding performance, enabling faster processing of both frozen and fresh meat blocks. Processes frozen blocks at temperatures as low as -25°C without compromising quality or texture. Suitable for a variety of raw materials, including beef, pork, poultry, and fish. The upgraded motor supports even higher production rates, making it ideal for large-scale industrial use. Features a 280 mm throat with robust cutting plates and knife options to ensure uniform particle size. Suitable for fine or coarse grinding, depending on your needs. Integrated block pusher and feeding system reduce manual labor and improve efficiency. Made from stainless steel for easy cleaning and compliance with stringent hygiene standards. Smooth, crevice-free surfaces minimize contamination risks. Iiedpfx Aovt R A Dsn Dja Minimizes heat generation during grinding to maintain product integrity and comply with food safety regulations. Safety interlocks and overload protection mechanisms safeguard both the operator and the equipment. Intuitive control panel for easy operation and monitoring. Despite its high power, the design is optimized to consume energy efficiently during continuous operation. Processes frozen and fresh meat for various end products such as: Minced meat Burgers Sausages Nuggets Other meat-based products This model is an excellent choice for high-demand production environments requiring consistent quality and reliability.