This cold smoke plant is a converted fermentation cooling plant made of stainless steel with very good insulation. The chamber has two doors, one above the other. The smoke has 6 tiers, the spacing of which can be varied according to the length of the product. The Cylindrical Chips Smoke Generator glows for 2 to two and a half hours depending on the air supply setting. The smoke density and glowing speed are regulated by the strength of the air supply. The smoking temperature in the chamber inc...
For sale is a Laska line ( Wolf freezer micro cutter ) by Laska from 2021.
List price 600000
There are still :
-2x seydelmann 750 l cutter
-1x seydelmann 120 l cutter
-various packaging machines a -canning line
-various handtmann fillers
- one slicer line
And much more
1 x Marel continuous portion cutter.
Model – IMP X-300.
Serial number – 1088.
Date of manufacture – 1998.
Electrical supply – 400v / 50-60hz / 3 phase.
Overall dimensions – 2500mm L x 1800mm W x 2100mm H.
Weight – 700kg.
Supplied with air compressor.
We are selling Injektor including Siemens touch panel, liner filter, brine filtration system, mixer. The possibility of setting the injection pressure steplessly. For easier cleaning and maintenance, each pin can be removed individually, without use of any tools. The centrifugal pump has a stainless steel rotor, as well as a brine level sensor, which prevents dry operation and possible damage to the pump and rotor.
Technical details: Belt width: 350 mm
Number of needles: 102 of 3mm, on the top ...
Baader 47 skin puller for fish. Capacity up to 60 files / min depending on size. Max width fish 22 cm, Skins whitefish, Redfish, As well as flatfish,
Dimensions 210 x 80 cm H 120 cm.
Lubeca LW 303 line for closing Hansa type boxes, including:
1. Two Lubeca LW 303 sealing machines with a full set of production equipment necessary for work.
2. A fast clincher to feed both machines at 130 cans per minute
4. Supply tapes from distributor to 1st and 2nd sealing machines:
- 5 m. length
- 2.5 m. length
5. Lead strip, after sealing machines:
- 5 m. length
Gift 3rd Lubeca sealer and clincher, for spare parts.
The machines are fully renovated from Lu...
FILLETING LINE FOR FISH
Consist of Model: 478
Year of manufacture: 1985
Has been used for sardines
Baader in feed line consisting of: Baader mobile automatic 5 lane infeeder, type: 478 .
Baader mobile automatic feeder, type: 478, year of construction: 1985, 400 V, 3 Ph, 50 Hz, 5 A, 5 lanes, lane width: (5x) 40 mm, total dimensions: 3350 mm x 1300 mm x 2450 mm.
Complete set contains:
- Brine injecting machine IMAX 430F - IMAX430-7271-15
- Brine tank LB300 - LB300-3751-15
- Rotation filtering unit DF 510A - DF510-764-15
Machine in perfect condition. Used only for a short period. Machine may be used in fish industry as well as in poultry processing.
BAADER 184 WHITE FISH FILLETING
Baader 184 white fish filliting machine Operator requirements 1 personCapacity 24-40 fish/min steplessly adjustable according to the size of fish. Power Requirements 10 kW Water consumtion approx. 25 l/min
Dimensions approx. 6,15×1,70×1,50 m
Coveyor belt assembly for the processing of i.e. fish
Two directional with adjustable speed.
Made of stainless steel and nylon components (bearings i.e).
Provided with a gutter in the centre with water connection.
Belt lenght 300 cm
Belt width 30 cm
Working hight 95 cm
Boleto Fish Gutting Machines for species such as: Trout, Mackerel, Arctic Char, Sea bream, Sea bass or Herring is simple and solid in construction.
The Fish gutting machine is plain and strong constructed.
It is easy to operate, and maintenance can be carried out by the operator, i.e. no extra costs are involved to outside assistance. Also the maintenance costs are very low.
The machine is made to order and built, according to customers information about type and size of fish to be gutted. Th...
Marel MSC 240 Horizontal Slicer
The MSC 240 is an efficient and reliable horizontal slicer providing top quality slicing.
The slicer is developed for horizontal slicing of fresh, cold smoked salmon and similar fish species. The slicer cuts long and consistent thin slices from the total length of the product. Ideal for value added products.
Loading and clamping of the fillet on to the cutting table is done manually.
The horizontal slicer has a vertical drive to control and adjust sli...
Marel 2 track check weigher.
Type - DWU.
Year of manufacture - 2004.
Conveyor dimensions - Length:188cm. Width:30cm. Height:95cm. / Adjustable.
Weight minimum - 0.01kg
Weight maximum - 5kg. Weighing product over several times over the conveyor.
Video can be sent to you if wanted in working stage.
Both screens are mounted and is in working condition.
Machinen is tested and in good condition.
Item: D-1035-Double bulk feeder with weight
Stainless Steel double bulk feeder with weight.
Dimension: Vat L 1800 X W 850 X H 1300 mm
Bigger lift: 460 mm, Small lift 100 mm, flight 80 mm
L 2700 + weight 500 mm , Total L 3200 mm
COMPLETE BAADER 176 FLATFISH FILLETING LINE
This complete Flatfish filleting line is new bought in 2017 and is used for 1 year. This line consist of the following equipment:
Baader 176 Flatfish filleting machine;
Cycloon Baader 176;
2x Steen 600 Skinning machine;
Baader 61 Grinding machine;
Baader 62 Grinding machine;
De-icing tank with hopper;
Elevator conveyor belt;
Waste conveyor belt;
Trimming table (black side);
Trimming table (white side);
BAADER 176 FLATFISH FILLETING MACHINE...
JBT Stein gas fired fryer. 34" wide belt with 15' frying length. Top hold down belt etc. Was kept in a small factory with a complete line start to finish to be used as a backup if the larger factories had a problem so hasn't been used a lot.
Baader 427 deheader for COD and whitefish.
Capacity - 12-28 fish pr. minute.
Weight of fish - From 3kg. - 13kg. (50-100cm.)
Water consumption - 20L/min.
Power consumption - 2kw.
Stainless steel chains.
Conveyor dimensions - Length - 260cm. Width - 35cm/20cm.
Access height - 95cm. Take off height -135cm. Total dimensions - Length - 270cm. Width - 170cm. Height - 175cm.
We have a video of the machine in running condition.
Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute,
Year mod 1983.
Dimensions 690 x 185 cm H 180 cm.
Only 1100 running hours. (Across approximately 2 years) now surplus to requirements.
Great condition, perfect working order and excellently maintained.
Additional photos and video can be provided in the New year.
Significant Spares also available at additional cost.
Nesco 8 station grader
Stainless 8-station grader. Maximum weight range - Up to 1000g. Power - 3 phase. Previously used for grading approximately 600kg/h of frozen fish fillets 5-8oz in size.
2 x JBT FMC Foodtech autoclave / retorts in nice condition. Have come direct from a European pate producer. Single door, 1.4m diameter 4 trolley capacity 6790 litres. Two identical machines and we also have a 6 trolley version A146.
Stainless, variable speed conveyor with UV disinfection zone, the UV disinfection zone consists of two arrays of UV lamps, the top array is mounted above the wire belt and bottom array of lamps is mounted below the wire facing upwards. This is set up to achieve disinfection on all sides of a product placed on the conveyor, HMI touch screen controls, belt dimensions 3500mm x 500mm, stainless wire mesh belt, with manual, 1Ph
Formaco Multi needle injector
Model: FGM 16/64 F
2017, stainless multi needle injector, conveyor dimensions 1300mm x250mm, previously used for 16 x quad needles for fish processing industry, 3Ph
Kroma Fish gutting machine
Model: Gutmaster 1200
2007, stainless, up to 65 fish per min, electrically controlled touch screen controls, with flighted elevator conveyor outfeed 3Ph
Olympic Games: Machineseeker sponsors Team Germany
How to receive 100% of our e-mails
Machineseeker Group becomes title sponsor of EHF Champions League
Morlock Motors official partner of Machineseeker and Truckscout24
Machineseeker Trust Seal
What is the Trust Seal?
The Machineseeker Trust Seal enables buyers to quickly recognize whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Verification of the dealer's postal address
Validation of the banking details
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal awarded to you in your listings on Machineseeker. In this way, you signal to any potential buyer the independently verified seriousness of your company. This creates buyer confidence and increases the likelihood of successfully selling machines. In addition, you have the option of including the Maschinensucher seal of confidence on your homepage and letterhead.