Used Gear Griding Machine for sale (70,827)

Condition: used, Technical details: z-travel: 1250 mm swing diameter over bed: 260 mm workpiece dia. over bed: 500 mm workpiece dia. over support: 250 mm center height over bed: 260 mm hobbing length: 2000 mm module max. : 8 / 12 total power requirement: 9,5 kW weight of the machine ca.: 3,8 t Hfjdpjv U Un Hofx Aftjl

Condition: good (used), max. module 2 hobbing length 135 mm total power requirement 2,2 kW weight of the machine ca. 1420 kg dimensions of the machine ca. 2,00 x 1,60 x 1,43 m --> Technical specifications Maximum milling diameter: Ø 150 mm --> Maximum milling length: 135 mm --> Maximum module: 2 --> Spindle bore: Ø 24 mm --> Spindle mount: MK-4 Hjdjzkvuvspfx Aftofl --> Cutter speeds: 140–1120 rpm --> Automatic feeds Equipment and accessories: Coolant system, cutters, change gears, operating instructions

Condition: repair required (used), Year of construction: 2008, functionality: not functional, machine/vehicle number: 06-13633, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse movement of the column: ±20 mm - Maximum workpiece external diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece Specifications - Maximum nominal module (for steel with an approximate tensile strength of 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm, where d0s is the external diameter of the cutter (in mm) - Maximum external diameter (internal gearing): 280 mm - Maximum band (toothed area) width: 42 mm - Maximum stroke length for toothing: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load supported by the table (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum attainable helix angle (with hydrostatic guide): ~45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm Hfodpsxwl Tzsfx Aftel - Weight: 5700 kg Main Features and Capabilities: - Vertical Design: Optimized for chip evacuation and easy loading/unloading - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy via Heidenhain linear scales - Measurement system: Marposs T25 (for angle alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip conveyor Machine Status: NOT WORKING: NC does not start

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm Hsdpfsxwl N Aex Aftsfl - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg Hsdpfx Afexwlmujtefl - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Grinding worm dimensions: Min./Max. outer diameter: 280/350 mm Width: 84/104 mm Max. pitch with limitations: MOD 8.0 (DP 3.2) Number of threads: up to 3 with limitations Max. usable width (shift distance): 90 mm For detailed technical information, please refer to the attached PDF file. Accessories: Several Fässler diamond wheels Hfodjyfnlkspfx Aftel Dressing device Grinding stones Turbo separator

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC Spiral Bevel Gear Cutting Machine Gleason No 631 Hfsdpow Tfb Sofx Aftol Year of manufacture: 2011 Control: SIEMENS 840d Retrofitted in 2011/2012 with new control, drives, etc. The machine was fully overhauled in 2011. A new control system and drives were installed.

Condition: ready for operation (used), functionality: fully functional, One used CNC gear grinding machine OERLIKON Opal 800 Max. tip diameter: 1000 mm Min. root diameter: 40 mm Min. module: 1 Max. module: 16 Number of teeth: 999 Max. gear width: 630 mm Opal grinding wheel and diamond disk Hfodsyucd Hepfx Aftjl Only single profile grinding possible, see photo.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 Hfedpsxu U Suefx Aftsl - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: used, Year of construction: 1986, machine/vehicle number: 275590, Ref. No. 25362 Technical Data: - Drilling capacity 25 mm - Drill spindle taper MK 3 Hsdpfx Aeyf Ehioftjfl - Drill spindle speeds 100 / 205 / 345 / 440 rpm 695 / 885 / 1450 / 2900 rpm - Drill spindle stroke 130 mm - Drill spindle reach 260 mm - Coordinate table with 3 T-slots 580 x 240 mm - Table travel X-axis: 415 mm Y-axis: 155 mm - Drive 400 V / 0.75 / 0.9 kW - Space required approx. W 900 x H 1800 x D 700 mm - Weight approx. 270 kg - Machine vice

Condition: good (used), Gear hobbing machine, milling machine, tool milling machine, vertical milling machine, roller milling machine, gear hobbing machine, gear hobbing machine, high-performance hobbing machine -Manufacturer: Liebherr, high-performance gear hobbing machine type SS 5-K/500 -Working area: Ø max. 500 mm -Max. cutter diameter: 186 mm Accessories: Includes extensive accessories (see photos) Hfsdpfxov Dtmme Aftol -Not included: Template for helical gearing -Machine dimensions: 2300/1460/H1870 mm -Accessory dimensions: Pallets 1420/1300/H300 / 1200/800/300 mm -Weight: 5300 kg plus 535 kg accessories

Condition: defective spare-parts repository (used), functionality: not functional, workpiece diameter (max.): 400 mm, According to the electrician, the main motor needs to be rewound. The carbon brushes should be replaced, and two coils in the control cabinet need to be replaced as well. Hedpfjzp R Tkox Aftjfl Up until the motor failure, the machine was fully operational.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm Hfsdpfex Aq Egjx Aftel max. workpiece weight: 60 kg without filter *

Condition: used, Year of construction: 1998, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg with Turbo Separator, loading unit, latest-generation balancing and dressing unit and various accessories * Hfodezgw I Nspfx Aftel

Condition: used, Year of construction: 2009, controller manufacturer: Siemens, controller model: 840 D, _____ Description: Year of manuf. : 2009 In General: Year of manufacture:2009 Control system:Siemens 840 D External gear diameter:1,200 mm Internal gear diameter:1,200 mm Maximum gear width:260 mm Maximum workpiece diameter:1,500 mm Machine base: Travel:600 mm Lateral adjustment:+/- 60 mm Cutting head: Spindle diameter:125 mm Tool holder:SK 45 Distance between spindle and table:0–820 mm Stroke length:270 mm Max. module:16 mm Max. tool diameter:300 mm Max. spindle speed:25 rpm Hodpfjzdxi Nsx Aftefl Table: Table diameter:900 mm Table bore:320 mm Bore depth:520 mm Max. speed:12 rpm Max. table load:95 kN Equipment: Chip removal:2 magnetic belt conveyors Coolant supply:Cutting oil system with filter and temperature control Set-up operation:Electronic handwheel

Condition: like new (used), functionality: fully functional, overall weight: 7,000 kg, This machine is configured with 4 fully electronic CNC axes and has integrated software that generates the automatic program. Description Hsdpfx Aewvbqijftefl Maximum gear diameter: 400 mm Gear width: 76 mm Stroke: 82 mm Rotation: 150 - 700 rpm Module: min. 0.5 mm Module: max. 6 mm Machine weight: approx. 7500 kg Electrical equipment: – Operating voltage: 380/400 V – Protection: 20kva Machine with new CNC Siemens 808D Siemens drives and servomotors New update 2025 Screens for automatic program generation Automatic cycles NR12 Included in Chip conveyor Coolant tank Automatic lubrication Digital pressure controls Hydrostatic guide

Condition: excellent (used), Year of construction: 1991, max. wheel diameter 10 - 330 mm gear width 180 mm max. module 7 min. module 0,5 clamping length 420 mm number of teeth 10 - 600 ical angle +/- 45 ° turning speeds 1100 - 1900 U/min grinding wheel diameter 280 - 350 mm grinding wheel width 84 - 104 weight of the machine ca. 5,1 t dimensions of the machine ca. 4,5 x 6,0 x 2,3 m Hodpozd Hgisfx Aftsfl

Condition: refurbished (used), functionality: fully functional, Universal Profile Hobbing and Thread Milling Machine ZFWVG 250x5000 / S7 • Thread milling • Gear hobbing • Longitudinal milling Max. workpiece diameter over saddle: 250 mm Max. workpiece diameter over bed guideway: 500 mm Spindle bore: 102 mm Tailstock quill travel: 100 mm Main motor: 4.0 kW Cross-feed motor (X-axis): 4.3 kW Longitudinal feed motor (Z-axis): 3.8 kW Electrical configuration Operating voltage: 400 V Control voltage: 24 V Frequency: 50 Hz Programmable logic control (PLC) for fixed machine functions Total connected load: 9.5 kW Milling length: 5,000 mm Space requirements: Length: 7,000 mm Width: 2,500 mm Height: 1,600 mm Net weight: 6,700 kg Hfjdew Hquxspfx Aftol Standard accessories: • Standard thread milling attachment ApG • Max. milling diameter: 150 mm • Spindle taper: Morse 3 • Max. module for hobbing: Module 3 • Min./max. number of teeth for hobbing: 4–50 Options: • Hobbing attachment ApFW Hobbing of parallel and helical profiles up to module 7 Max. milling diameter: 150 mm Spindle taper: Morse 4 • Heavy-duty thread milling attachment ApGS Hobbing of parallel and helical profiles up to module 5 Max. milling diameter: 150 mm Spindle taper: Morse 4

Condition: used, Year of construction: 2014, Technical details: max. wheel diameter: 150 mm gear width: 350 mm max. module: 4 total power requirement: 48 kW weight of the machine ca.: 13 t dimensions of the machine ca.: 4,88 x 4,40 x 3,56 m spindle turning speed range: 100-1000 U/min Hfjdpfextbmisx Aftel Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. *

Condition: excellent (used), Capacity M16 module Table diameter: 1,200 mm Maximum workpiece diameter: 1,500 mm Milling slide travel: 600 mm Hfsdpezql Ufjfx Aftjl Table center hole diameter: 250 mm

Condition: used, Bench drill, gear drill ALZMETALL Type AB 40 ST Production drill Manufacturer No. 750 Year of manufacture 1994 Drilling capacity 40 mm Spindle mount MK 4 - short quill Overhang 325 mm Quill stroke 200 mm Table size 740 x 460 mm Height adjustment of drill head 700 mm Distance spindle-table max. 1015 mm Spindle speed 56 - 2500 rpm 12 gear stages Automatic feed 0.15 - 0.2 - 0.3 - 0.36 mm/rev Motor power 4 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 12 gear stages - Drilling and threading device with right and left rotation Hedpfx Aoza Hzgoftofl - Electric foot switch for switching the direction of rotation to left for thread cutting interruption - Rapid traverse via hydraulic quill movement - Semi-automatic operating sequence: rapid traverse - working feed - rapid return - Drill head height adjustment via hand crank - Table height adjustment via hand crank (table height from 740 to 1170 mm) - Coolant system - Control cabinet on the back of the machine - Mounted on a steel plate (1300 x 750 x 15 mm) with machine feet - Quick-change drill chuck METABO 3 to 16 mm - Operating manual and electrical diagram Overall height with drill head at the top 2750 mm Space requirement L x W x H 1400 x 850 x 2300 mm Weight 1250 kg Good condition

Condition: used, Technical details: center height over bed: 260 mm workpiece dia. over bed: 500 mm Hfodpov U T Dyefx Aftol workpiece dia. over support: 250 mm hobbing length: 2000 mm number of teeth: 2 - 50 feed:: 0,023 - 5,17 / mm/min module max. : 8 / 12 spindle bore diameter: 102 mm workpiece rpm : 18 - 224 U/min tailstock quill adjustment: 100 mm total power requirement: 9,5 kW weight of the machine ca.: 5,2 t dimension machine xH: 3,6 x 2,1 x 2,0 m

Condition: used, Year of construction: 1988, Technical details: Hfodpfxswrzute Aftsl max. wheel diameter: 210 mm total power requirement: 60 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,85 x 2,60 x 1,80 m grinding slide feed: 700 mm grinding slide feeds: 1-15.000 m/min max. workpiece weight: 150 kg centre height: 260 mm grinding wheel diameter: 240 mm

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm Hsdpfx Afjxc E H Sstjfl gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: used, MONNIER + ZAHNER MZ 120 is a Worm gear cutting machine, built for precision, high accuracy and reliable operation. Capacities: workpiece diameter 2–40 mm, module max 1.5 mm, workpiece length max 250 mm, max cutting length 150 mm, cutter diameter 16–32 mm. Specs: milling spindle speed max 8000 t/min, work piece spindle speed 770 t/min, milling spindle drive 1 kW, max milling head inclination 45°. Accessories: sprinkle cooling device, lamp, switch cabinet air conditioner. Achieves tight tolerances; typical sectors: automotive, watchmaking, machine tools, aerospace, medical. Hfodeza Ukiepfx Aftjl