Used Gildemeister Ct 20 for sale (240)

Condition: new, Year of construction: 2025, Gildemeister 20 completely rebuilt to new condition Isdpfxofzk S Ds Am Deat -AC motor for production time control -AC motor for threading -GM-type soundproof casters -frequency converter for spindle speed programming -bar passage 20mm ,25mm , 28mm with integral loader -Optional : X and Z axis NC cross slides, NC pickup with NC pickup slide -EC brand

Condition: used, Integral automatic loader Pietro Cucchi Pick-up Iaedpfx Aoy Exgtom Dot Pick-up recovery slide Hydraulic unit for pick-up

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Iedpfxjyxm Tns Am Djat Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: excellent (used), Year of construction: 2016, operating hours: 75,078 h, functionality: fully functional, CNC Turning and Milling Center Gildemeister CTX gamma 1250 CT – Technically Excellent Condition (Year of manufacture: 2016) Operating hours: 75,078 Spindle hours: 48,772 Available from: Week 47 / 2026 (Inspection under power during ongoing production possible) Basic Equipment Turning length: 1,250 mm Main spindle as integrated spindle motor (ISM102) Drive power: 35/45 kW (100/40 % DC) Spindle speed: up to 4,000 rpm Partial hollow chucking device (hydraulic) Draw tube inner diameter: 104 mm, 848 mm depth C-axis with hydraulic spindle brake Upper cross slide with turning/milling spindle as motor spindle Mounting: HSK-63A DIN 69893 Hydraulic clamping during turning Y-axis: ±200 mm B-axis: ±120° (torque motor) Tool disc magazine: 36-position NC tailstock with mounted, hydraulically traversable quill and fixed live center Iasdpey A Hngsfx Am Djt Absolute, direct measuring systems on X, Y, and Z1 axes Coolant pump: 6 bar, 20 l/min, filtration fineness 10 µm Cooling system for spindle motors, motor console, turning/milling spindle, and B-axis USB and Ethernet interfaces Control CNC controller: Siemens Sinumerik 840D solutionline Operation: ERGOline Control Software: SINUMERIK Operate, ShopTurn 3G Operating system: Linux Extended Equipment Tool chain magazine: 120-position (instead of 36-position) Mechanical oil mist separator, filter class H13 Chuck flushing device on main spindle Coolant supply through spindle Tropical package (up to 40°C ambient temperature) Workpiece measuring probe BLUM TC60 incl. cycle package 3D data model of work area (STEP / IGES) Profibus interface Hand-held control device with jog mode and emergency stop function Tailstock force increased to 20 kN Special tailstock version for torque-proof pressure device Coolant & Chip System Coolant cleaning unit: Filter unit FK 20 (20 l/min) Coolant tank 950 l Magnetic roller MW180 Process pumps: 5 bar / 20 bar Chip conveyor type 300 S-2 (wear-resistant design, XAR) Return delivery pump: 1.2 bar Condition The machine has been regularly serviced by Gildemeister service and is in technically excellent condition. Dimensions & Weight Machine: approx. 580 × 280 × 285 cm, approx. 20,000 kg Chip conveyor: approx. 670 × 125 × 160 cm, approx. 1,000 kg Total weight incl. accessories: approx. 22,605 kg Number of packages: 11 Loading meters: approx. 21 Disassembly, loading, transport, and recommissioning can be organized Machinery Trade Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: excellent (used), CNC Turning-Milling Center Gildemeister CTX gamma 1250 CT, Year 2016 Pictures to follow... Available from March 2027 Base machine: CTX gamma 1250 CT with a turning length of 1250 mm - main spindle as integrated spindle motor, ISM102, drive power 35/45KW (100/40% duty cycle), 4000 rpm - partial hollow clamping device (hydraulic), draw tube inner diameter 104 mm x 848 mm depth - C-axis and spindle brake (hydraulic) - upper cross-slide with turning/milling spindle as motor spindle with hydraulic clamping during turning, HSK-63A DNI 69893 interface - Y-axis ±200 mm - B-axis ±120°, torque motor - disc-type tool magazine with 36 stations - NC tailstock with bearing-mounted, hydraulically movable quill, fixed center - absolute, direct linear measurement systems in X, Y, Z1 axes - coolant pump 6 bar; 20 l/min, plug-in screen filter 10 µm filtration - cooling system for spindle motors, motor console, turning-milling spindle, B-axis torque motor - CNC control with ERGOline operating panel (manufacturer and type per control description) - USB interface, Ethernet interface CNC Control: SIEMENS Sinumerik 840D solutionline with ERGOline Control, SINUMERIK Operate and ShopTurn 3G, Linux OS at no extra cost Tool chain magazine for 120 tools replaces disc-type magazine (36 tools), HSK-A 63 DNI 69893 interface, - only with Siemens control - Mechanical oil mist separator 100 m³/h, filter class H13 Chuck flush device at the main spindle, external, Coolant supply through turning spindle Tropical package for machine environment temperatures up to 40°C, consisting of control cabinet cooling unit (up to 40°C) B-H7080 workpiece touch probe, BLUM, with Quickstart cycle package including probe TC60 with transmitter and receiver unit, HSK 63A tool interface, 1 stylus, measuring cycles B-Z0908 3D data model of the specified machine workspace in Step and IGES format. Delivery of the 3D data model on CD. B-L7000 Standard electrical interface Profibus Handheld control unit: Axes X1Y, 1, Z1, C1, B1, X2, Z2, Z3, C3, C4 can be jogged and moved incrementally using the handwheel. Emergency stop and feed override functions are available on the handset. Tailstock feed force increased to 20kN. SK-2014-3518 The tailstock is supplied without quill bearing to allow fitting of a twist-proof pressure device. When used as a tailstock, a rotating center must be used. Coolant cleaning system: - Filter unit type: FK 20 * Filter performance 20 l/min * Filter medium: filter fleece PN100/100 - Coolant tank 950l type: FKA/950 - Magnetic roller type: MW180 - Process pump 5 bar (50 l/min) - Process pump 20 bar (40 l/min) with DBV 20/40 - Control cabinet Chip conveyor type 300 S-2: - Wear-resistant version (guides and base plates made from XAR) - Return pump 1.2 bar (100 l/min) etc. The full equipment and further technical data can be found in the documentation, which we are happy to provide on request. The machine has always been serviced by Gildemeister customer service and is in technically perfect condition. It can be inspected under power and during production. Dimensions & weight: (LxWxH) Machine CTX Gamma DL 125 – 580x280x285 cm, 20,000 Kg Chip conveyor 670x125x160 cm, 1,000 Kg Total weight incl. accessories 22,605 Kg Number of packages 11 Loading meters: 21 Dismantling, removal, shipping, and reinstallation can be organized. Ijdpsy Axuxsfx Am Deat

Condition: good (used), Year of construction: 2007, operating hours: 27,896 h, functionality: fully functional, machine/vehicle number: 2101-0171, turning diameter: 20 mm, rotational speed (max.): 10,000 rpm, torque: 14 Nm, Equipment: bar feeder, chip conveyor, TECHNICAL DATA Max. turning diameter: 20 mm Tool body diameter: 20 mm Spindle positioning resolution: 0.1° Main spindle Rated power: 3.7 kW Maximum power: 5.5 kW Torque: 14 Nm Rated torque: 9.4 Nm Speed: 10,000 rpm Axis data Linear axis Z1 / X1 / Z1 – Stroke: 80 / 35 / 240 mm Linear axis Z1 / X1 / Z1 – Rapid traverse (max.): 40 m/min Linear axis Z1 / X1 / Z1 – Acceleration (max.): 10 m/s² Linear axis Z1 / X1 / Z1 – Nominal force: 1,250 N Linear axis Z2 / X2 – Stroke: 180 / 230 mm Linear axis Z2 / X2 – Rapid traverse (max.): 40 m/min Linear axis Z2 / X2 – Acceleration (max.): 10 m/s² Linear axis Z2 / X2 – Nominal force: 1,250 N Tool holder Number of fixed tools (internal): 6 Iaodey Dr S Hepfx Am Djt Diameter: 20 mm Number of fixed tools (external): 4 Tool shank size: 12 × 12 mm Number of driven tools: 4 Collet type: ESX 16 MACHINE DETAILS Control: Fanuc 16iT Machine dimensions (L × W × H): 2,275 × 1,300 × 1,760 mm Weight: 2,600 kg Connected load: 21 kVA Power-on hours: 85,620 h Operating hours: 27,896 h EQUIPMENT - Bar feeder FMB Turbo 3-36 / 4200 / A, year of manufacture 2007 - Coolant tank with chip conveyor - Central lubrication - Hand-held control unit - Documentation available

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) Iasdjx D H I Tjpfx Am Dst • Spindle bore: 25 mm (upgraded) • Machine duty hours: 29,200 h Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Iasdox Hggwepfx Am Djt Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Iedpfx Amox Hgkce Doat Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Year of construction: 1989, operating hours: 64,136 h, Centre height: 350 mm Turning length: 1000 mm Max. swing diameter over bed cover: 600 mm Max. swing diameter over cross slide: 360 mm Spindle bore: 107 mm Iedpfsvr Eh Eex Am Deat Speed range: 16 – 3150 rpm Feed range longitudinal & face: 0.5 – 5000 mm/min Rapid traverse longitudinal & face: 9 m/min Main drive: 30 kW Dimensions of machine with chip conveyor (L x W x H): 5400 x 2200 x 2000 mm Weight: 6400 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 with TFT display General description: CNC manual input control system with program entry via function and numeric keypad. All information is entered in dialogue with the screen. Integrated menu technology with plain text display of all functions. Operator keypad, display, and electronic handwheel located within a separate chip guard housing. The EPL control offers the following capabilities: • Direct interactive program entry and editing by the operator through the EPL control without manual technological preparation • NC programs in ISO/EIA format can be entered, output, or manually keyed in via the RS 232 serial interface Machining cycles: • Removal cycles for longitudinal, facing, and contour turning, including with allowance • Thread cutting • Undercuts as per DIN 509-Form E and F and DIN 76; grind stock programmable • Axial and radial grooves as per DIN 471 and 472, including bottom finishing • 90° radii and 45° chamfers • Automatic cutter radius compensation for cycles, undercut, groove, radius, chamfer Programming: • Block-orientated, metric/inch, diameter for absolute entry, radius for incremental entry • Full circle programming, subroutine technology, hide levels for program sections, zero point offset, mode selection via menu Program entry and output: • Interactive via guided menu or direct in dialogue • Hydraulic 3-jaw chuck Ø 315 mm with through spindle bore Ø 80 mm • Hinged chip conveyor • 12-position tool turret VDI 40, 6 standard stations + 6 driven tool stations • Coolant system • RS 232 interface • Electronic handwheel • Electric foot switch for 3-jaw chuck and tailstock quill • Lighting • 12 various standard toolholders (to be finalized on site) Overhauled servo drive for main spindle, 06/2025 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 1990, condition: ready for operation (used), A CNC lathe Gildemeister is available. Swing diameter over bed/face slide: 600mm/360mm, bed dimensions X/Y: 350mm/450mm, carriage length: 620mm, carriage width: 250mm, facing travel: 1100mm, chuck diameter: 315mm, spindle bore: 107mm, spindle diameter: 140mm, spindle power: 30kW, torque: 950Nm, speed: 3150rpm, rapid traverse X/Z: 10m/min/5m/min. Quill diameter: 100mm, quill stroke: 180mm, max. tailstock pressure: 1200daN, turning length: 1000mm. Machine dimensions X/Y/Z: approx. 4350mm/2050mm/2000mm, weight: approx. 6400kg, operating hours: 49811h. Documentation available. An on-site inspection is possible. Isdpfx Amox R Duas Djat

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Ijdpfsydp Azjx Am Deat

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is Main spindle: max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C1: 360 ° Subspindle: inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° axis stroke: x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm Linear tool panel carrier for slide 1: number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm Linear tool panel carrier for slide 2: number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm feeds: rapid traverse ( X / Y / Z ) max. 40 m/min Iodstqmnnspfx Am Deat feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Condition: good (used), Center height 260 mm Trestle holder MK 4 Quill stroke 100 mm Iaodpfx Amoralkms Det This hydraulic tailstock comes from a GILDEMEISTER CT 40 CNC slant-bed lathe. Fig. similar Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel

Condition: used, Year of construction: 2002, Gildemeister cnc lathe CTX 400 S2 V3 CNC pilot control 4290 Heidenhain year 2002 Iaedpfeu Aahrjx Am Djt C axis driven tools tool head 12 tools Sauter VDI30 spindle passage 66mm Turning diameter max. 420 mm Turning length max. 630 mm Konik with machine chip conveyor documentation 2 driven toolholders 1/1

Condition: good (used), Year of construction: 2007, operating hours: 30,395 h, functionality: fully functional, Main spindle: Speed up to 5,000 rpm Counter spindle: 6,000 rpm C-axis turret: 12 stations Siemens 840D Powerline Max. turning diameter: 320 mm Max. turning length: 600 mm Travel paths: X-axis: 250 mm, Z-axis: 600–635 mm Sub spindle Iajdsy R Ddbjpfx Am Det Y-axis Chip conveyor C-axis Driven tools Bar feeder

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m Isdpfx Amow Syc Io Deat

Condition: ready for operation (used), Year of construction: 2002, operating hours: 22,542 h, spindle speed (max.): 5,000 rpm, travel distance X-axis: 570 mm, travel distance Z-axis: 635 mm, controller manufacturer: FANUC, controller model: Series 21i-T, number of axes: 3, This 3-axis Gildemeister CTX 400 Serie 2 was manufactured in 2002. It features a spindle speed of up to 5,000 rpm and a z-axis travel of 635 mm, along with an x-axis travel of 570 mm over the bed. The machine includes a 12-position turret and is equipped with a 3-jaw chuck, chip conveyor, and coolant system. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 Serie 2 machine we have for sale. Contact us for further details. • X-axis travel: max. 570 mm (over bed) / 420 mm (over slide) • Voltage: 400 V • Frequency: 50 Hz • Power capacity: 44 kVA • Rated current: 64 A • Main fuse: 80 A • Control voltage: 230 V (AC) / 244 V (DC) • Working hours: 22,542 hours • Feed time: 8 hours 4 minutes • Turret: 12-position turret • Tooling capability: driven tools; C-axis displayed on screen Additional equipment • 3-jaw chuck • Chip conveyor • Coolant system • Workspace lighting • Optional: Tool Holder Package Iedpfjy Nynysx Am Doat • Optional: Schunk Rota NCD 210-66 three-jaw chuck Technical Specification Counter Spindle No Driven Tools Yes

Condition: good (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 313154, spindle bore: 79 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 25 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 2,500 mm, total length: 5,000 mm, total width: 2,000 mm, overall weight: 4,000 kg, controller manufacturer: GRUNDIG, controller model: ELTROPILOT, input voltage: 400 V, input frequency: 50 Hz, input current: 64 A, nominal power (apparent): 44 kVA, number of slots in tool magazine: 12, number of driven tool stations in tool turret 1: 6, Equipment: documentation/manual, GILDEMEISTER CTX 400 E CNC Lathe Iasdpfx Ajy I Tcusm Dst - Swing diameter over bedway cover: 570 mm - Swing diameter over cross-slide cover: 420 mm - Cross travel (X-axis): 220 mm - Longitudinal travel (Z-axis): 635 mm - Main spindle headstock diameter: 170 mm - Spindle diameter in front bearing: 120 mm - Chuck diameter: 200/250 mm - C-axis speed: 100 rpm - Holding torque: 200 Nm - Indexing accuracy: 0.04° - Including 12-station tool turret, with 6 driven positions - Tailstock diameter (front): 80 mm - Tailstock travel: 515 mm - Tailstock taper: MT 4 The machine is equipped with a tailstock, tool holders in the tool turret, and a three-jaw chuck, diameter: 200 mm. Attention: The item must be collected bindingly between 24.08. and 27.08.2026 by prior arrangement. FCA D-61352 Bad Homburg – loaded onto truck

Condition: excellent (used), Year of construction: 2009, operating hours: 87,000 h, functionality: fully functional, turning length: 600 mm, turning diameter over cross slide: 410 mm, spindle speed (min.): 22,000 rpm, For sale is a CNC turning center manufactured by DMG, model CTX beta 800, year of manufacture 2009. The machine is in a well-maintained and fully operational condition. Technically flawless and immediately ready for operation. Technical Data Machine type: CNC Turning Center Manufacturer: DMG Model: CTX beta 800 Year of manufacture: 2009 Control system: Heidenhain 4290 Max. turning length: 600 mm Tool turret: 12-position Tool holder: VDI 40 Operating hours: approx. 87,000 h Spindle hours: approx. 22,000 h Linear guide Z1 recently renewed Iajdjyq Hq Njpfx Am Djt Turret drive S2 recently replaced Machine regularly serviced by customer service Technically flawless and fully functional Inspection under power possible by appointment Service and maintenance reports available Extensive accessory package Driven tools by WTO Further documentation and photos available on request Availability: from July 2026 If interested, simply write or call Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg

Condition: used, Year of construction: 2002, turning diameter 400 mm turning length 635 mm control Heidenhain Eltropilot greates pass round over bed 570 mm Iaedpfxjy I A U Hs Am Dot travel -x axis 220 mm travel -z axis 635 mm main spindle bore 79 mm drive of main spindle 21 kW max. torque on the spindle 240 Nm main spindle speeds: 25-5.000 turning speed range - C-axis 100 U/min feed power in the axis x + z 3,5 / 7 N rapid traverse X-axis 20 m/min rapid traverse Z-axis 24 m/min total power requirement 44 kva weight of the machine ca. 6 t

Condition: excellent (used), Hello, I have for sale a DMG GILDEMEISTER CTX 310 V3 CNC LATHE with driven tools. TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 310 V3 Control system: Heidenhain Data Pilot 4290 Country of origin: Germany Year of manufacture: 2003 - Total machine operating hours: 9,144 h Machine specifications: - Turret: 12 tool positions for VDI-30 holders + TurnPlus attachment - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Hydraulic tailstock - Through-spindle - Max turning diameter (X-axis): 190 mm - Max turning length (Z-axis): 455 mm - Cooling system - SMW AutoBlock three-jaw hydraulic chuck - Spindle bore diameter: 50 mm - Chip conveyor - Full programming manual - Mechanical and electrical documentation - Machine weight: 3.8 t - Loading included in the price The machine has undergone a full service inspection. 100% operational. Connected and ready for work. Iajdpfx Amoy Rb H Ho Det Stal-Com has been engaged in sales, service, and training on DMG group CNC machines for 19 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. Every machine undergoes a meticulous technical check. Apart from Polish customers, our machines are also purchased by clients across Europe and parts of Asia. Each machine can be inspected in operation, as we also provide machining services. After purchasing a machine from us, we conduct operator training and can also set up production of parts at the customer's facility. We cooperate on a long-term basis with many companies, supplying them with further machine tools.

Condition: excellent (used), For sale: GILDEMEISTER CTX 410 V3 CNC LATHE with driven tools TECHNICAL & VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V3 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2006 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 positions for VDI-30 tool holders (all stations are driven) - Max spindle speed: 5,000 rpm - C-axis - Driven tools - Tailstock - Max turning diameter (X-axis): 320 mm Iedpfoy Rb Ecox Am Djat - Max turning length (Z-axis): 600 mm - Coolant system - Hydraulic collet chuck on the main spindle (can be replaced with 3-jaw chuck) - Main spindle with through-hole (bore diameter: 66 mm) - Finished parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5 tons - Loading included in the price The machine has undergone a complete inspection. Fully operational and ready to work—currently connected and available for demonstration. About the company: Stal-Com has been trading, servicing, and providing training on DMG Group CNC machines for over 20 years. We specialize in all Gildemeister lathe models and Deckel Maho machining centers. Every machine undergoes a thorough technical inspection. We supply not only customers in Poland, but also across Europe and parts of Asia. Each machine can be inspected live in production, as we also provide subcontract machining services. After purchase, we provide operator training and can help set up production at the customer’s facility. We work with many clients under long-term partnerships, supplying additional machines as needed.

Condition: excellent (used), Year of construction: 2007, For sale: CNC LATHE GILDEMEISTER CTX 410 V6 with driven tools, Y-axis, sub-spindle TECHNICAL AND VISUAL CONDITION: Very Good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX 410 V6 Control: Heidenhain 4290 Country of origin: Germany Year of manufacture: 2007 The machine is fully equipped with both static and driven tool holders. Machine specifications: - Turret: 12 stations for VDI-30 tool holders (all stations driven) - Max spindle speed: 5000 rpm - C-axis on both spindles - Driven tools - Y-axis - Sub-spindle - Max turning diameter X-axis = 320mm - Max turning length Z-axis = 600mm - High-pressure coolant system Isdpfx Aoy Rbz Dom Deat - Hydraulic 3-jaw chuck 250mm on the main spindle - Hydraulic 3-jaw chuck 200mm on the sub-spindle - Main spindle through-hole (bore diameter 77mm) - Parts catcher - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 6 tons - Loading included in the price The machine has undergone a complete inspection. 100% operational. Connected and ready for operation. Stal-Com company has been dealing with the sale, service, and training on DMG group CNC machines for 20 years. We specialize in all models of Gildemeister lathes and Deckel Maho machining centers. All machines undergo a thorough technical inspection. Our machines are purchased not only by customers from Poland, but also from all over Europe and parts of Asia. Every machine can be inspected in operation, as we also provide CNC machining services. After purchasing a machine from us, we offer operator training as well as on-site production setup. We have long-term cooperation with many companies to whom we supply additional machine tools.

Condition: excellent (used), Year of construction: 1995, Equipment: documentation/manual, FOR SALE: CNC LATHE GILDEMEISTER CTX400 TECHNICAL AND VISUAL CONDITION: Very good Type: CNC Lathe Manufacturer: GILDEMEISTER Model: CTX400 Control: Heidenhain 1190 Country of origin: Germany Year of manufacture: 1995 Machine specifications: - Turret: 12 tool stations, VDI-30 tool holders - Max. spindle speed: 5000 rpm - Hydraulic tailstock - Parts catcher - Max. turning diameter X-axis: 290 mm - Max. turning length Z-axis: 600 mm - Coolant system Ijdpfx Asy Rbr Nsm Djat - Three-jaw hydraulic chuck 200 mm - Spindle bore: 66 mm - Through-spindle - Chip conveyor - Complete programming manual - Mechanical and electrical documentation - Machine weight: 5.5 tons - Loading onto truck included in the price The machine has undergone a full technical inspection. 100% operational. Connected and ready for work. Stal-Com has been selling, servicing, and providing training on CNC machines from the DMG group for 17 years. We specialize in all models of Gildemeister lathes as well as Deckel Maho machining centers. All machines undergo a thorough technical inspection. Besides Polish customers, our machines are purchased by clients throughout Europe and parts of Asia. Each machine can be inspected under power during production, as we also provide machining services. After purchasing a machine from us, we offer operator training and can help set up part production at the customer's site. We work with numerous companies on a long-term basis, supplying them with further machine tools.