Used Gildemeister Ct 20 for sale (264)

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Hfedpoxnmxmofx Aaben Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Hodewym Nfspfx Aabsfn Accessories: Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Year of construction: 2003, condition: good (used), Sub-spindle, Y-axis, B-axis SIEMENS 840D Powerline Turning diameter max 200mm Turning length -635mm Hfsdpoglf A Hjfx Aabon Swing Diameter -250mm Spindle speeds main & sub-spindle 20-7000 rpm Turret head 1+2: 12 driven positions B-Axis, upper turret head +135/-45° Misc. accessories MARCELS MASCHINEN CH

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical specifications: Hsdpfx Aaexmvhbjbofn Swing diameter over bed: 600 mm Spindle bore: 74 mm Spindle speed – range: 3000 Longitudinal travel Z: 1250 mm Cross travel X: 398 mm Max. swing diameter over carriage: 480 mm

Year of construction: 2006, condition: ready for operation (used), Control Unit Brand SIEMENS Model 840 D Main Drive Spindle speed range 7000 rpm Hsdpfxsxg Un He Aabsfn Number of axis 7 Additional Equipment Double spindle version Y-axis Main and counter spindle Collet chuck 1 attached tool axial 1 attached tool radial Belt filter system Loading magazine FMB Turbo 10-72 XT This 7-axis Gildemeister Twin 41 horizontal turning machine was manufactured in 2006. Ideal for precision and complex turning operations, it offers robust performance and reliability. Consider the opportunity to buy this Gildemeister Twin 41 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: used, Year of construction: 2008, turning diameter 250 mm Hfodpfsxiy Dfex Aabjn turning length 1185 mm control Siemens 840 D total power requirement 21 / 28 kW

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm Hjdpfoxnmvfox Aabefn C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 5601-0106, turning length: 320 mm, spindle speed (max.): 10,000 rpm, overall weight: 2,800 kg, bar passage: 33 mm, equipped with Iemca Boss 542 new in 2000 – well tooled – Ge Fanuc 18i-T Control Hedpfsxn R N Ajx Aabsfn

Condition: good (used), Year of construction: 2009, Ref. -No.: 10523 Manufacturer: DMG GILDEMEISTER Type: NEF 600 Year of construction: 2009 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Halberstadt Country of origin: Germany - Japan Turning Speeds: 4.000 RPM Tool holder type: VDI 40 DIN 69880 X stroke: 398 mm Y stroke: 1250 mm C-Axis: ° Turning Length: 1.200 mm Swing Diameter Over Bed Slide: 490 mm Spindle Diameter In Front Bearing: 160 mm Spindle Bore: 118 mm Spindle nose: 220h5 Spindle Speed Min.: 3.500 RPM Max. Torque: 790 / 590 Nm Rapid Travel Speed X-Axis: 30 m / min Rapid Travel Speed Z-Axis: 30 m / min Main Drive: 20 - 4000 kW Total Power Requirement: 50 kW Max. Rod diameter: 92 mm Spindle 1 chuck diameter: 315 mm Max feed rate: mm / min Power Capacity: 37 / 28 kW Turret places: 12 Pcs Hsdpfx Aasw Upkmsbofn Machine length: 6500 mm Machine width: 3500 mm Machine Height: 2300 mm Weight Of The Machine Ca.: 5,3 t Further information: Tailstock: Tailstock displacement: 1,150 mm Clamping force: 12.5 kN Tailstock holder: MK 5 Machine is still in production and can be inspected at any time.

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed 560 mm Swing diameter over cross slide 250 mm Spindle bore 65.3 mm Hsdevn Rlzopfx Aabjfn Power Max. 15 KW Speeds 11.2 - 2,240 rpm Centre width 1,000 mm Quill diameter 80 mm Quill mount MK 5 Incl. chip conveyor Incl. complete documentation

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Hjdpfxsxf A Edj Aabsfn Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: good (used), Year of construction: 2007, operating hours: 21,168 h, machine/vehicle number: 8087020322B, For sale: GILDEMEISTER Sprint 65 linear CNC turning center Model: GILDEMEISTER Sprint 65 linear Year of manufacture: 2007 Control: SIEMENS 840D Operating hours: 21,168 h Power-on hours: 61,362 h Technical data: - Max. spindle speed main and sub-spindle: 5,000 rpm - Main spindle through-bore: up to Ø 65 mm (bore Ø 75 mm) - Rapid traverse speed: up to 30 m/min Equipment: - 3 turrets with 12 stations each - Turret 1 has a fault and needs repair - Tool holder VDI 30 - Driven tool drive on all turret stations - C-axis for main and sub-spindle - Y-axis on slide 3 - Sub-spindle coolant flushing - Workpiece pick-off device - Workpiece conveyor belt - Mechanical preparation for oil mist extractor - Electrical interface and software preparation for bar feeder magazine - Synchronous running between main and sub-spindles - Hinged belt chip conveyor - 2 additional inputs/outputs (4 M-functions) - Workpiece counter and time calculator - Rigid tapping (without compensating chuck) - Software for polygon turning on slides 1, 2, 3 - Constant cutting speed - Helical interpolation on slide 3 (thread milling) - Spindle speed monitoring system - Three-color signal lamp - Air conditioning unit for electrical cabinet - High-pressure coolant system with belt filter and heat exchanger (capacity 980 l, pressure 20 bar, 40 l/min for turrets 1, 2, and 3) - 3-jaw chuck for main spindle - 3-jaw chuck for sub-spindle - Coolant spray gun for cleaning the work area - Differential pressure system for the sub-spindle with the possibility to set two different clamping pressures - Upper slide flushing with cutting fluid - The machine is under power. Price: €20,000 (fixed price) Location: 75334 Straubenhardt Hfsdpfxovzwm Es Aabjn Note: Loading and transport are to be organized by the buyer! If interested or for further information, please contact us.

Year of construction: 2007, condition: ready for operation (used), General Data Measurements width 1750 mm Measurements depth 2100 mm Measurements height 1710 mm Hfjdpfx Ajxdfppsabsn Machine weight 2800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 4000 Number of axis 2 Movement X-Axis Movement 220 mm Z-Axis Movement 700 mm This Gildemeister NEF 400 was manufactured in 2007. A robust horizontal turning machine featuring a SIEMENS SINUMERIK 840D control, it offers a spindle speed of up to 4000 rpm. Dimensions are 2100x1750x1710 mm, and it weighs 2800 kg. If you are looking to get high quality turning capabilities consider the Gildemeister NEF 400 machine we have for sale. Contact us for more information. Application Types Turning

Condition: excellent (used), Year of construction: 2002, Machine in perfect condition. Hodergpv Tjpfx Aabofn Can be inspected during production any time

Condition: excellent (used), Monitor Display (108142) Make DMG Gildemeister Hodoigqr Hspfx Aabsfn Type Supply 11098, I.D.-No.259284 Monitor was taken from a mechanically defective machine function was tested

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Iemca 432 Fire suppression system installed in 2022 High-pressure unit from 2022 Spindle bore: 16 mm Hodpfxexlt Upj Aabefn Turning length: 160 mm Control: GE FANUC Series 18 i-T Spindle speed: 8,000 rpm Rapid traverse: 30 m/min

Condition: used, Year of construction: 2004, Technical data: Main spindle: Max. turning diameter: 33 mm Max. speed: 8000 1/min Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Slide travel Z1: 320 mm Slide travel X1: 50 mm Slide travel Y1: 255 mm Rapid traverse speed: 30 m/min Ball screw diameter: 25 mm Tool holder slide 1: Number of tools stationary with tool shank 16 x 16: 5 pieces Slide 2: Slide travel X2: 165 mm Slide path Z2: 200 mm Rapid traverse speed: 30 m/min Ball screw diameter: 30 mm Tool holder slide 2: Number of stations for turret with integrated spindle: 8 pieces Number of axially driven tools (integrated): 8 pieces Coolant tank, approx.: 400 l Hfsdpotzyx Tefx Aaben Coolant pump, max. output: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - CNC control Fanuc iT - Workpiece unloading system - IEMCA bar loading magazine - 5-pos. tool carrier plate for slide 1 - Electrical interface and software for bar loading magazine - Collet chuck holder for main and pick-up spindle - 2 Double drill holder for rear machining support with cylinder - Pick-up spindle workpiece pusher

Condition: used, TECHNICAL DETAILS - Max. bar diameter : 12,7 [mm] - X stroke : 85 [mm] - Y stroke : 150 [mm] - Z stroke : 160 [mm] Hodpfeuy Uywex Aabjfn - Spindle speeds : 12000 [rpm] - Number of axes : 5 EQUIPMENT - CNC : Fanuc 18 i-T - Bar loader : IEMCA CH 220 Type 32 L - Oil mist extractor : LTA Basic line 01

Condition: good (used), Gildemeister lathe with Heidenhain control system Good condition, fully functional. Can be inspected and tested on site. Shipping also available internationally. Inspection: Please note that, to avoid misunderstandings, the item can be inspected and tested under power prior to purchase. Please ask any questions before buying to avoid any uncertainties. If you have general questions or wish to arrange an inspection, I am available at the phone number provided below or above at any time. Hedpfx Aexiv Akoabjfn Subject to prior sale and errors in the description. VAT is shown separately on my invoices. Shipping by freight forwarder.

Condition: excellent (used), Year of construction: 2023, Gildemeister CLX 450 TC turning/milling center, Hfsdjxhg D Nopfx Aabon Year of manufacture: 2023, Control: Siemens 840 D SL Operate, Turning length: 1,000 mm, Hollow chucking device Ø 67 mm, Main spindle up to 5,000 rpm, Milling head, infinitely variable B-axis +/- 120°, HSK 63 interface, 60-position tool magazine, Y-axis +/- 100 mm, Spindle speed up to 12,000 rpm, Counter spindle, 2 x C-axis, Steady rest slide, Tropical package, DXF interface, Coolant pressure 20 bar, 750 power-on hours, 150 spindle hours,

Condition: excellent (used), Year of construction: 2017, operating hours: 20,000 h, functionality: fully functional, spindle speed (max.): 6,500 rpm, bar passage: 42 mm, bar diameter (max.): 42 mm, Production lathe Gildemeister Sprint 42 - 8 linear axes with high-pressure system and Iemca bar feeder Hsdpfx Ajxbpp Ujabefn Year of manufacture: 2017 Control: Fanuc 31i Operating hours: ~20,000h Version with 8 axes – linear drive on X1 axis Main and counter spindle speed: 6,500 rpm Max. bar capacity: 42mm Coolant system: Slide 1: 8 bar Slide 2 + Y: 20 bar Bar feeder: Iemca BOSS 552/32 Parts conveyor belt

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning diameter over cross slide: 410 mm, turning length: 1,200 mm, turning diameter: 600 mm, Heidenhain plus IT CNC control 8 fold turret head 3-jaw chuck 315mm diameter Hedswnwz Uopfx Aabjfn tailstock coolant device chip conveyor Technische Daten / technical details: max. Drehdurchmesser über Bett / max. turning diameter over bed 600 mm max. Drehdurchmesser über Schlitten / max. turning diameter over sledge 410 mm max. Drehlänge / max. turning length 1200 mm Planweg (x) / cross way (x) 320 mm Längsweg (z) / longitudinal way (z) 1250 mm Drehzahlbereich / spindle speed 3000 UpM /rpm Werkzeugrevolver / turret head 8 fach /holes Reitstockaufnahme / tail stock taper MK 5 Eilgang X/Z / rapid feed X/Z 15 m/min. Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 24/18 kW Gewicht der Maschine ca. / weight 5500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: ready for operation (used), Gildemeister 852.14.00-00.21 card (851.75.00-00.21), used, normal signs of use, 100% functional Hjdpfei D U S Uex Aabofn

Condition: good (used), Year of construction: 1997, - Control system: SIEMENS SINUMERIK 840-C - Max. bar diameter: 65 mm - C-axis - Main spindle speed: 31 - 6,300 rpm - Turret 1: 8 stations, 4 of which are powered - Turret 2: 8 stations, 4 of which are powered - Driven tool speed: 4,000 rpm - Both turrets with internal cooling - High-pressure unit - Chip conveyor - Bar feeder IRCO SiMag 65 Hjdjxa Epbepfx Aabsfn - Max. bar length: 3,200 mm Dimensions LxWxH: - Machine: 3,400 x 1,700 x 1,800 mm - Bar feeder: 4,000 x 1,000 x 1,400 mm - Chip conveyor: 3,000 x 1,100 x 1,600 mm Total weight: approx. 6,000 kg

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 Hodpfx Ajub Amlsabefn tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing