Used Gildemeister Gd 16 for sale (235)

Condition: used, Hydraulic self-centering steady rest, luenette, lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearings Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar steady rest base: 245 x 240 mm Type of construction: stationary - 3 pieces roller bearing Ø 35 mm - roller width 18 mm - hydraulic self centering dimension L x W x H: 350 x 250 x 550 mm dead weight: 65 kg Cedpfx Afoiv Irlspopu good condition

Condition: good (used), Year of construction: 2007, operating hours: 88,040 h, functionality: fully functional, machine/vehicle number: 07400003691, turning diameter: 120 mm, spindle bore: 118 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 30 m/min, total height: 2,500 mm, total length: 5,500 mm, total width: 2,500 mm, overall weight: 11,000 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D POWERLINE, DMG GILDEMEISTER TWIN 102 CNC Turning and Milling Center - Recorded spindle hours: 43,558 - Spindle speed range: 3,200/5,000 rpm - Swing diameter: 270 mm - Spindle distance: 900 mm - X1 axis travel: 290 mm Csdeyaqgyjpfx Afpepu - Z1 axis travel: 650 mm - X2 axis travel: 180 mm - Z2 axis travel: 650 mm - Y1 axis travel: ±40 mm - Z3 axis travel: 670 mm - X3 axis travel: 175 mm - Max. bar diameter: 100/104 mm - Number of driven tools per tool turret: 12 - Including chip conveyor, with 2 tool turrets (each with 12 tool stations), main and counter spindles, as well as foot switches Attention, the machine has the following defects: - The B-axis is defective (mounted on turret 1) - Guideways and drives show age-related wear - X2 axis (guide rails) runs slightly out of alignment by approximately 0.03 mm (should be re-measured) - Occasionally, axis reference value setting in the control system fails - The hydraulic pump was replaced after a failure and is now installed externally as a standalone unit FCA D-58256 Ennepetal, loaded on truck at a mutually agreed date at the end of February 2026.

Condition: good (used), Year of construction: 2008, operating hours: 72,899 h, functionality: fully functional, machine/vehicle number: 07510001241, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 12,000 rpm, workpiece weight (max.): 150 kg, total height: 3,040 mm, total length: 7,800 mm, total width: 4,100 mm, overall weight: 16,500 kg, controller manufacturer: SIEMENS, controller model: SINUMERIK 840 D, DMG GILDEMEISTER GMX 250 LINEAR CNC Turning and Milling Center - Recorded spindle hours: 39,361 - Swing diameter: 640 mm Cjdpfxoyaqczo Afpepu - Counter spindle turning diameter: 400 mm - Spindle distance: 1,500 mm - X1 axis travel: 550 mm - Y1 axis travel: 180 mm - Z1 axis travel: 1,185 mm - B1 axis travel: 240° - X2 axis travel: 180 mm - Z2 axis travel: 1,050 mm - Z3 axis travel: 1,150 mm - Spindle speed range: 3,200/4,000 rpm - Rapid traverse rate, Slide 1 (X/Y/Z): 40/24/70 m/min - Rapid traverse rate, Slide 2 (X/Z): 24/36 m/min - Rapid traverse rate, Slide 3 (Z): 36 m/min - Tool holder: HSK 63 - Spindle speed: 12,000 rpm - Number of tool stations in chain magazine: 40 stations - Incl. tool holders mounted on the turret - Incl. bar loader, manufacturer: COCCHE GIOVANNI, type: CNC-DB 110, year of manufacture: 2008, serial number: CNCDB-08.306, weight: 1,500 kg Note: The machine has the following defects: - The hydraulic unit is faulty – it needs to be repaired - The Q2 axis (milling spindle tool changer) fails frequently - X2 axis (guideways) moves slightly askew - The linear guides and drives show wear commensurate with age Attention: A vehicle with 3,000 mm transport width is required for transport! FCA D-58256 Ennepetal, loaded onto truck at a mutually agreed date at the end of February 2026.

Year of construction: 2009, condition: ready for operation (used), A CNC universal turning and milling machine DMG Mori is available. Travel X/Z: 160mm/450mm, turning diameter over bed/face slide: 330mm/260mm, distance between centers: 450mm, chuck diameter: 210mm, speed: 5000rpm, spindle power: 16.5kW/11kW, tool positions: 12, rapid traverse: 30m/min. Machine dimensions X/Y/Z: approx. 3200mm/2000mm/1800mm, weight: approx. 3500kg, operating hours: 18127h. Dokumentation vorhanden. On-site inspection is possible. Cpjdpfx Ajygmcqjfpsu

Condition: used, Manufacturer: DMG Gildemaster Country of Origin: Italy CNC Control: FANUC 16i-TB with 7 axes CE Declaration of Conformity Technical Data - Number of axes: 7 - Number of spindles: 2 Travel distances: X1 axis: ±30 mm Z1 axis: 120 mm Y1 axis: 195 mm X2 axis: 30 mm Z2 axis: 180 mm MAIN SPINDLE - Max. bar diameter: 12 (13) mm - Travel: 120 mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm COUNTER SPINDLE - Max. bar diameter: 12 (13) mm - Spindle speed: 12,000 rpm - Spindle drive power: 3.7 kW - Torque: 6 Nm Driven tools: Tool drive power: 1.1 kW Cedpjygl N Njfx Afpopu Max. speed: 6,000 rpm IEMCA SMART 316 bar feeder Chip conveyor Machine dimensions: approx. 2043 x 1200 x 1750 mm Machine weight: approx. 2,200 kg Main spindle and counter spindle with new bearings!

Condition: good (used), Year of construction: 2001, spindle speed (min.): 2,500 rpm, Model Year: 2001 Chuck Diameter: 10" Number of Axes: 2 Length: 650 mm Swing Diameter: 650 mm Cpsdpfx Asx N A Dwofpsu Spindle Speed (RPM): 2500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, PEEK

Condition: reconditioned (used), Year of construction: 2002, Cycle-controlled lathe GILDEMEISTER NEF 320 Cpodpfx Aoxn Apbsfpou With MANUAL PLUS 4110 control Year of manufacture: 2002 Spindle bore: 50.8 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Center height: 160 mm Speed range: 10 – 4000 rpm, stepless With the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck Schunk ROTA – S plus Ø 200 mm 2 sets of soft top jaws ICP contour programming Tailstock with extendable quill Chip tray Coolant system Chip rinse gun 6 machine feet Operating manual

Condition: reconditioned (used), Year of construction: 2003, Universal Lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE control (SIMATIC PANEL TOUCH SCREEN) Year of manufacture: 2003 Spindle bore: 52 mm Distance between centers: 750 mm Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Cross slide travel: 185 mm Cpodpfx Asxn Ar Asfpsu Infinitely variable speed range: 14 – 3550 rpm Including the following accessories: Sliding guard with internal lighting Multifix tool holder with 2 inserts 3-jaw chuck SCHUNK ROTA plus Ø 200 mm 2 sets of soft top jaws Coolant system Chip blow gun 6 machine feet Operating manual The machine is in very good condition!

Condition: reconditioned (used), Year of construction: 2006, CNC Lathe GILDEMEISTER CTX 420 linear Equipped with Siemens 840 D powerline control Year of manufacture: 2006 Max. turning diameter: 324 mm Max. turning length: 600 mm Max. swing diameter: 680 mm Spindle bore: 79 mm Max. spindle speed: 4,500 rpm Including the following accessories: Sliding guard with interior lighting 12-position turret with 12 driven stations Y-axis, C-axis Tool measuring device Parts catcher 3-jaw hydraulic chuck 210 mm with foot switch Csdsxzt Dcjpfx Afpspu Hainbuch hydraulic collet chuck IRCO Breuning RBK 10012 bar feeder Signal lamp Tailstock with quill Chip conveyor Oil mist extraction Coolant system with high-pressure coolant (IKZ) and belt filter unit Operating manuals

Condition: reconditioned (used), Year of construction: 2005, Cycle-controlled lathe GILDEMEISTER NEF 520 With MANUAL PLUS 4110 control Year of manufacture: 2005 Spindle bore: 70 mm Center distance: 1000 mm O rotation over bed: 500 mm O rotation over cross slide: 290 mm Center height: 250 mm Speed range: 10 - 3050 rpm infinitely variable With the following accessories: Sliding guard with interior lighting 8-station Sauter VDI 30 turret with driven tools 10 pcs. VDI 30 tool holders 2 pcs. driven tools VDI 30 Coolant device Cpjdpfx Ajuda Tnjfpsu 3 jaw chucks SCHUNK ROTA 0 250 mm ICP contour programming Tailstock with extendable drilling quill Chip tray Operating instructions

Condition: ready for operation (used), Year of construction: 2006, operating hours: 32,503 h, functionality: fully functional, machine/vehicle number: 01510006441, controller model: MANUAL PLUS 4110, TECHNICAL DETAILS Cjdpfx Afsx Uz Edspepu Control: MANUAL PLUS 4110 MACHINE DETAILS Electrical Supply Rated voltage: 400 V Phases: 3~ Frequency: 50 Hz Performance Data Power: 24 kVA Rated current: 35 A Fuse rating: 50 A Operating hours: 32,503 h

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 3 Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek Cpodsx Nvr Uepfx Afpou

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 4,500 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 350 mm, Year of manufacture: 2001 Chuck diameter: 12" Number of axes: 2 Length: 1000 mm Cedpfx Asx Nvqdefpepu Neck diameter: 350 mm Spindle speed (rpm): 3500 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek.

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 2 Codpfx Afox Nvpaspepu Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Additional equipment • Mechanical and electrical preparation for fire extinguishing system • Cooling system with 600l capacity and 50µm filter • Pump with options of 8 or 20 bar • IEMCA Boss 332E bar loader for bar length up to 3m • Bristol B270/E oil mist separator • Moving headstock (80mm) with tools on slides plus tool breakage detection Machine Benefits Cjdpfx Afex D H I Tspopu Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: used, Year of construction: 2001, chucking diameter 250 mm greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain Cpedpfx Ajw Syc Ijfpsu weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: used, Year of construction: 1988, tail stock ja ja Cjdpsu Su I Eofx Afpjpu condition nicht geprüft weight of the machine ca. 3,8 t

Condition: used, Year of construction: 1999, control Heidenhain centre distance 1400 mm Cpodpfx Afew Syd Sjpsu weight of the machine ca. 3,6 t Handwheel defective

Condition: used, Year of construction: 2000, turning diameter . mm turning length . mm control 2x 840 D Kühlmittelsystem chip conveyor ja kW generator - rated current 95,00 A connected load 65,00 kW Csdpfx Aeqn A Rnefpopu

Condition: good (used), Year of construction: 1998, turning diameter max. 250 mm Cedpfjqn A Rgox Afpspu control Fanuc 16 T 2 toll turrets 2 x 12 tool taper HSK 63 frequency 50 Hz ampere 168 A Chip conveyor: JAKSS Filter system: JABelade

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, We offer you: Manufacturer: DMG Gildemeister Model: GMX 250 linear Year of manufacture: 2006 Control: Siemens 840 D powerline Technical Data: Max. turning diameter: 640 mm Turning length: 1,185 mm Draw tube inner diameter: 67 mm Travels: x1-axis: 550 mm y-axis: +/- 90 mm z1-axis: 1,185 mm b-axis: +/- 120° x2-axis: 180 mm z2-axis: 1,050 mm Main spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Counter spindle: Max. speed: 5,000 rpm Drive power: 21/28 kW Milling spindle: Speed range: 0 – 12,000 rpm Indexing: 1° Tool holder: HSK63A Number of tool pockets: 46 positions Turret: Number of tool holders: 12 positions Holder: 40 mm Hollow clamping device: Ø 67 mm Operating hours: approx. 92,100 h Spindle hours: approx. 47,800 h Cjdsyfmibepfx Afpopu Technical features and accessories: - Main and counter spindles ISM 76 - C-axis and spindle brake, hydraulic - B-axis interpolating and with hydraulic clamping - Tool magazine with 4 additional loading stations - Absolute, direct measuring systems on all linear axes - Coolant tank 600 l with lifting pump and level regulator - Coolant filtration with belt filter, coolant pump 8 bar, 20 l/min - Chip conveyor - Preparation for work area extraction - USB and Ethernet interfaces - Tool monitoring system, manufacturer Artis, type CTM - Star turret with driven tools, including direct measuring systems - Counter spindle with partial hollow clamping device, C-axis and spindle brake (hydraulic), holding brake and direct measuring system - Automatic sliding safety door - Coolant spray gun - Electrical cabinet lighting and socket outlet - Signal lamp, 4 colors - Tailstock function for the counter spindle - 2x three-jaw power chucks, manufacturer Forkardt 30QLC 250-72 - Turret-mounted steady rest, range 8 – 101 mm Accessories, tools, and clamping devices shown only included if specified in the additional information. Subject to changes and errors in technical data and specifications, as well as prior sale!

Condition: like new (used), Year of construction: 2013, operating hours: 7,100 h, functionality: fully functional, turning length: 650 mm, turning diameter over cross slide: 350 mm, turning diameter: 385 mm, spindle speed (min.): 4,500 rpm, spindle bore: 67 mm, travel distance X-axis: 255 mm, travel distance Z-axis: 800 mm, For sale: Used DMG NEF400 V3, 5th Generation ISM 2-axis universal lathe with C-axis. Travel distances: X: 255mm Z: 800mm Swing over bed: 385mm Swing diameter: 350mm Turning length: 650mm Equipment: - Main spindle as integrated spindle motor - Max. spindle speed: 4,500 rpm - Drive power: 8.0/11.5 kW (100/40% duty cycle) - 12-position VDI30 disc-type turret with 6 driven positions - C-axis and spindle brake (hydraulic) - Automatic tailstock, MK4 mounting, travel: 680mm - CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate, and ShopTurn 3G - Operating system: Linux - Technology cycle for applying alternating spindle speeds for vibration-critical setups - Manual tool measurement device in work area - Hydraulic unit - Coolant spray gun - Mechanical oil mist separator - Reinforced coolant pump: 12 bar, 23 l/min - Chip conveyor with discharge height of 1,250mm, discharging to the right Bar machining package consisting of: - Workpiece pickup unit with left-side conveyor for parts up to max. 65mm diameter, 150mm length, and 3kg max. weight Cpsdpfx Afoxzqnropju - Bar clamping device inner draw-tube diameter max.: 67mm - Interface for bar loader magazine - Foot switch for tailstock operation - Hydraulic 3-jaw chuck SMW-AUTOBLOK - RMS sensor (Relocation Machine Security) Machine available immediately! Machine ready for operation! Loading by us included! Transport can be arranged upon request!

Condition: good (used), Year of construction: 2007, Gildemeister NEF 600, year of manufacture 2007, Heidenhain Plus IT control, turning length 1100 mm, swing diameter Ø 600 mm, 8-position turret, VDI 40, tailstock dragged, spindle speed up to 3,000 rpm, chip conveyor, drag steady rest. Cpedeyf Eupopfx Afpou

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) An independent feed is installed at position 1 A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Codpfxjx Hggwe Afpjpu Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Year of construction: 1989, Technical details: number of spindles: 6 spindle passage: 20 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Gildemeister Type: GS20-6 Yob: 1989 six-spindle automatic lathe 8 main spindles for bars up to D=20mm All cross units are equipped with a tool holder (from Gildemeister or IMG Attachments) All longitudinal units are equipped, either fixed or rotating (without collets) A gear set for one speed is installed A gear set for one cycle time is installed The scope of delivery regarding the tooling equipment could be different like pictures. Please, contact us for getting more information and pictures on mail(at) or Codpfsx Hgkcjx Afpepu *