Used Gildemeister Gd 16 for sale (235)

Condition: reconditioned (used), functionality: fully functional, GILDEMEISTER GS20 LATHE VARIANT 25 MM ELECTRICALLY AND MECHANICALLY REFURBISHED -REFURBISHED PNEUMATIC SECONDARY CHUCK -NEW AIR TREATMENT UNIT AND SOLENOID VALVES -RADIAL AND AXIAL SLIDES IN POS. 1-2-4-5 -WORKPIECE PICK-UP AT POS. 6 MECHANICAL OVERHAUL: 1. TURNTABLE OVERHAUL 2. SLIDE OVERHAUL 3. FRONT AND LEVER OVERHAUL 4. SPINDLE OVERHAUL 5. COLLET OPENING/CLOSING SYSTEM OVERHAUL Codpfow Sxptsx Antoha 6. THREAD CUTTING UNIT OVERHAUL ELECTRICAL OVERHAUL: 1. NEW SIEMENS S71200 PLC AND SIEMENS KTP700 PANEL 2. CAM ENCODERS 3. RELAY REPLACEMENT

Condition: good (used), Year of construction: 1999, NEF520 year of manufacture 1999 Csdpfoy S Eu Rox Antsha

Condition: ready for operation (used), Year of construction: 2004, operating hours: 63,778 h, functionality: fully functional, machine/vehicle number: 06800002061, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS X-axis travel: 800 mm Z-axis travel: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter in the front bearing: 90 mm Chodpfx Anjy T Ikkjtja Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump output: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 63,778 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 74,523 h, functionality: fully functional, machine/vehicle number: 06800001121, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Travel, X-axis: 800 mm Travel, Z-axis: 300 mm Rapid traverse rate, X: 100 m/min Rapid traverse rate, Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy in point positioning: < 0.02 degrees Chjdsy T Id Djpfx Antja Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 74,523 h Note: The machine is sold including a small set of accessories!

Condition: ready for operation (used), Year of construction: 2002, operating hours: 77,119 h, functionality: fully functional, machine/vehicle number: 06810000041, rotational speed (max.): 6,000 rpm, spindle bore: 56 mm, spindle diameter: 90 mm, empty load weight: 6,000 kg, TECHNICAL DETAILS Chodpjy T Iddjfx Antoa Travel X-axis: 800 mm Travel Z-axis: 300 mm Rapid traverse rate X: 100 m/min Rapid traverse rate Z: 45 m/min Chuck diameter: 200 mm Spindle head, flat flange: F140 h5 Spindle diameter at front bearing: 90 mm Spindle bore: 56 mm C-axis Speed range: 0–100 rpm Torque, holding torque brake: 240 Nm Accuracy at point positioning: < 0.02 degrees Number of tool stations: 12 Cylindrical shank diameter: 40 mm Drive power, 40% duty cycle: 10.8 kW Torque: 28 Nm Speed: max. 6,000 rpm MACHINE DETAILS Power of the three-phase main drive: 25 kW Torque, 100% duty cycle: 160 Nm Speed range: 20–7,000 rpm Electrical data Power: 25/35 kW Voltage: 400 V / 50 Hz Control voltage: 24 V DC Hydraulics Total capacity: approx. 25 l Pressure: 80 bar Pressure for clamping device: max. 700 bar Coolant system Capacity: approx. 190 l Pump power: 1.7 kW Flow rate at 6 bar: 20 l/min Weight: approx. 6,000 kg Operating hours: 77,119 h Note: The machine is sold including a small set of accessories!

Condition: used, Year of construction: 1995, Machine in parts for sale spare parts ..... Csdonximuopfx Antjha CNC lathe, make GILDEMEISTER Type: CTX 600, year 1995 Forkardt chuck 315 mm, tool turret Tailstock, steady rest Headstock Guide covers and sheets Motors Machine in individual parts for sale ..... Please ask what you need and we will send you an offer.

Condition: good (used), Year of construction: 1985, CNC Lathe GILDEMEISTER Type: N.E.F. 1020 Year 1985 Control EPL 2 Turning diameter over bed : 1020 mm Turning diameter over face plates : 600 mm Turning length : 3000 mm Spindle speed : 5 - 1120 rpm Motorl.30 KW Spindle bore : 128 mm Tool turret Parat size : 4 with 10 holders Faceplate : 900 mm, steady rest, drill stand, chip conveyor, complete machine documentation and parameters available. Machine disassembled in stock. Complete weight approx. 12 000 KG. Cedpfjqc Ul Aex Antjha Further data see data sheets .

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, CNC Lathe Manufacturer: Gildemeister Model: CTX 420 linear V3 Year of Manufacture: 2003 Control Unit: Heidenhain Plus IT Swing diameter over bed: 680 mm Swing diameter over cross slide: 565 mm Cross travel: 260 mm Longitudinal travel: 635 mm Drive power (40/100%): 25/37 kW Speed range: 20 – 5000 rpm Codpjxc Uq Tsfx Antsha Weight approx.: 6500 kg Equipment: Driven tools: 12 stations Tool turret: 12-position Sauter turret VDI 30 Partly hollow clamping chuck Tailstock Automatic quill travel Quill taper: Mk 5 Chip conveyor Measuring arm Oil mist extraction unit Subject to prior sale and errors.

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] Csdou Habmopfx Antoha - Machine weight : 10500 [kg] - Number of working hours : 10946 [h] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Parts catcher - Parts conveying strip - Chips conveyor - Coolant tank - Bar loader : Iemca PRA 40/42F - Bar holder and stand - Bar holder housing - Oil mist extractor : Donaldson

Condition: used, TECHNICAL DETAILS - Number of spindles : 6 - Number of counter-spindles : 1 - Max. travel of front spindles : 120 [mm] - Max. bar feed : 130 [mm] SPINDLES * Max. bar diameter : 35 [mm] * Spindle speeds : 218-4000 [rpm] COUNTER-SPINDLE - Single-acting hydraulic counter-spindle - Counter-spindle position : 6 POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 5950 x 1680 x1980 [mm] - Machine weight : 10500 [kg] EQUIPMENT - Standard cutting carriage, in position : 6 - Hydraulic cylinder for rear attachment, in position : 6 - Fixed front spindles, in position : 1,2,3,4,5 - Thread milling and polygon unit - Combing unit - Recessing : Push over - Parts catcher - Chips conveyor - Coolant tank - Bar loader : Pietro Cucchi - Oil mist extractor : Donaldson Csdpfx Aneu Habgstjha

Condition: used, TECHNICAL DETAILS - Number of spindles : 2 - Number of axes : 2 MAIN SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] Chedpou E U Ufjfx Antsa - Max. turning diameter : 120 [mm] - C axis indexing precision : 0.1 [°] COUNTER-SPINDLE - Spindle speeds : 6500 [rpm] - Max. bar diameter : 42 [mm] - C axis indexing precision : 0.1 [°] POWER SUPPLY - Supply voltage : 230 [V] - Total installed power : 7.5 [kW] WEIGHT & DIMENSIONS - Machine floor space : 5.400 x 1.900 [mm] - Machine height : 2.000 [mm] - Machine weight : 5.000 [kg] MACHINE HOURS - Number of hours under power : 33912 [h] - Number of working hours : 21069 [h] EQUIPMENT - CNC : FANUC 160i - Coolant tank - Chips conveyor - Parts catcher - Parts conveying strip

Condition: used, TECHNICAL DETAILS - Spindle number : 6 - Max. bar diameter : 20 [mm], 25 [mm] in option - Cross slides number : 4 - Max. supply length : 100 [mm] - Spindle rotation speed : 420 - 5000 [Rpm] Cjdpfxeuharro Antoha - Indexing time : 0,7 [s] - Machining time : 1,4 - 60 [s] - Power : 11 [kW] - Dimensions : 5800 x 1500 [mm] - Weight : 6000 [kg] EQUIPMENT - 4 cross slides posts 1 2 4 5 - 1 chip conveyor - 5 drillers - 1 IEMCA PRA41/31/P feeder DBMS-36 (1995)

Condition: used, Year of construction: 2005, turning diameter 680 mm turning length 600-635 mm control Siemens Chsdpjzgxfvsfx Antea weight of the machine ca. 6500 kg

Condition: excellent (used), Year of construction: 2008, operating hours: 35,598 h, functionality: fully functional, machine/vehicle number: 07400004031, spindle motor power: 20 W, spindle speed (min.): 3,250 rpm, spindle speed (max.): 5,000 rpm, bar passage: 90 mm, overall weight: 10,000 kg, bar capacity 90 mm - 2x12 position driven turrets - Y axis in upper turret - tail stock - Siemens 840D power line Control - machine in perfect condition that has always worked with oli - very very well tooled - Lns Sprint S2 barfeed. Cedpfx Aneuyx Hzjteha

Condition: used, Tool presetting machine GILDEMEISTER-DE VLIEG, type EGS 5045 / Microset DPS 100 Serial No. 83-10-102, Year of manufacture 2002 Travel X-axis: approx. 400 mm Travel Z-axis: approx. 400 mm Tool holder in the mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table: Ø 340 mm Internal taper in the mounted rotary table: Ø 245 mm Tool holder plate as a rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Chodpohbal Djfx Antsa Rotatably mounted flange with centering diameter: Ø 102 mm Rotatably mounted flange with outer diameter: Ø 155 mm Rotatably mounted flange with 3x M10 mounting holes, pitch circle: Ø 130 mm Mains connection: 230 volts, 50 Hz - Measuring electronics Microset DPS 100 - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm, magnification 20x and two circle ground glass screens - Ground glass screen fixed with crosshair - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via handwheels - Rotatable rotary table with pneumatic clamping - Metal base with 3 drawers Footprint L x W x H: 1100 x 1000 x 800 mm Weight: 400 kg Good condition

Condition: used, Year of construction: 2003, turning diameter 210 mm turning length 580 mm control 840 D Siemens centre height 190 mm turning diameter over bed 330 mm turning dia. over face-slide 260 mm turning speed range - main spindle max. 4.000 min/-1 power capacity - main spindel 10 / 7,5 kW max. Torque 115 / 86 Nm spindle bore 68,5 mm max. usable bar diameter 51 mm C - Axis 0,001 ° travel -x axis 185 mm travel -z axis 455 mm number of toolpositions 12 pos. tool taper VDI 30 Driven Tool Stations: 6 pos. tailstock adjustment 400 mm intake pressure max. 4.000 N rapid traverse X: 20 / Z: 30 m/min Feed force ( X / Y / Z ) 4,5 kN total power requirement 21 kW weight of the machine ca. 3,2 t dimensions of the machine ca. 8,0 x 2,2 x 2,0 m CNC Turning- and Milling Center GILDEMEISTER - CTX 310 V3 - incl. IRCO Breuning bar loader - incl. 2x chucks, incl. various jaws Chedpfxstqmmuo Antoa - incl. 63x VDI30 turning tool holders - incl. 7x driven tools - incl. 6x reduction tubes

Condition: used, Year of construction: 2003, turning diameter max. 246 mm turning length 600 mm control 840 D Powerline Siemens greates pass round over bed 400 mm Swing dia. over traverse guideway 300 mm centre distance 600 mm turning speed range - main spindle max. 6.000 min/-1 power capacity - main spindel 16 kW max. Torque 155 Nm spindle diameter in front bearing 100 mm spindle bore 68,5 mm spindle nose 140H5 Spindle speed range subspindle max. 4.000 min/-1 power capacity - Sub spindle 7,5 kW max. Torque 48 Nm spindle diameter in front bearing 75 mm spindle bore 37 mm spindle nose 140H5 number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 5.000 min -1 power capacity - driven tools 3,7 kW max. Torque 24 Nm tool taper VDI 30 Tool dimensions with square shank 20 x 20 mm x-axis 160 mm z-axis 450 mm rapid traverse X: 60 m/min rapid traverse Z: 45 m/min Feed force X: 2,5 kN Feed force Z: 4 kN rapid traverse C: 200 1/min max. Torque C: 155 Nm Cjdpfxsypv Tqo Antjha total power requirement 32 kVA weight of the machine ca. 3,8 t dimensions of the machine ca. 8,0 x 3,0 x 2,7 m CNC - Turning- and MillingCenter GILDEMEISTER - CTX 320 linear V5 - Main- and Subspindle - tool-drive - C-Axis - ShopTurn

Condition: used, Year of construction: 2004, turning diameter max. 560 mm turning length 600 mm control 840D powerline Siemens greates pass round over bed 680 mm Swing dia. over traverse guideway 565 mm centre distance 620 mm turning speed range - main spindle 20 - 5.000 min/-1 power capacity - main spindel 25 / 37 kW max. Torque 390 Nm spindle nose 170H5 spindle bearing diameter 120 mm usable bar diameter 65 mm max. chucking diameter 250 mm C-Axis 0,025° / 360 ° Spindle speed range subspindle 20 - 7.000 min/-1 power capacity - Sub spindle 25 / 33 kW max. Torque 213 Nm spindle bearing diameter 90 mm spindle bore 57 mm Chjdpfx Aowmf Tpjntea spindle nose 140H5 C-Axis 0,025° / 360 ° number of toolpositions 12 pos. Number of driven toolspositions 12 pos. Spindle speed - driven tools max. 4.500 min -1 power capacity - driven tools 12,2 kW tool taper VDI 40 DIN 69880 Tool dimensions with square shank 40 mm x-axis 185 mm y-axis 80 mm z-axis 620 mm rapid traverse X: 60 m/min rapid traverse Y: 15 m/min rapid traverse Z: 45 m/min total power requirement 50 kVA weight of the machine ca. 7 t dimensions of the machine ca. 6,0 x 3,0 x 2,5 m CNC Turning- and MillingCenter GILDEMEISTER - CTX 420 linear V6 - Main and sub spindle - Tool drive - C axis / Y axis - Partial hollow clamping device - ShopTurn - Surface - Package bar processing consisting of: - Hollow clamping device 66mm - Workpiece picking device - Incl. 2x driven tools - Incl. 4x double tool holders - Incl. 4x tool holders - Incl. 83x tools

Condition: used, Year of construction: 2013, turning diameter max. 20 mm turning length max. 80 mm control Fanuc 310is max. usable bar diameter 20 (25) mm inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW Chjdstqmnnepfx Antja max. Torque 9,4 Nm C-Axis C1: 360 ° inner draw tube diameter 28,5 mm Max. speed main spindle 10.000 min/-1 power capacity - main spindel 3,7 kW max. Torque 9,4 Nm C-Axis C2: 360 ° x-axis 1: 50 / 2: 240 mm y-axis 1: 350 / 2: 120 mm z-axis 1: 80 / 2: 300 mm number of toolpositions 17 pos. inner processing 6 pos. outer processing 6 pos. driven statition 5 pos. Shank diameter 20 mm shaft cross cut 12 x 12 mm collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0.98 kW max. Torque 3x 4 / 2x 2,3 Nm number of toolpositions 13 pos. inner processing 4 outer processing 4 driven statition 5 pos Shank diameter 20 mm shaft cross cut 12 x 12 collet diameter ESX / ER 16 tool spindle speed range 3x 3.450 / 2x 6.000 min/-1 power capacity - driven tool-stations 5x 0,98 kW max. Torque 3x 4 / 2x 2,3 Nm rapid traverse ( X / Y / Z ) max. 40 m/min feed power max. 2,5 kN Accelaration max. 5 m/s² total power requirement 56 kVA weight of the machine ca. 4,8 t dimensions of the machine ca. 8,0 x 2,5 x 2,0 m CNC-Short-Lathe GILDEMEISTER - Sprint 20-8 - 8 Achsen ( 2x X / 2x Y / 2x Z / 2x C ) - Main- and Subspindle - Bar-Feeding-Magazine FMB turbo 3-36/ 3200A - Coolant System DELTATHERM

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Chodpfx Anozdum Detoa

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 3 Cedpfx Ansx Nvr Ustoha Length: 1000 mm Swing Over Bed: 350 mm Spindle Speed (RPM): 3500 Machinable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: good (used), Year of construction: 2001, functionality: fully functional, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 2,000 mm, rotational speed (min.): 4,500 rpm, feed length Z-axis: 500 mm, fuel type: electric, fuel: electricity, throat depth: 350 mm, Year of manufacture: 2001 Chuck diameter: 12" Number of axes: 2 Length: 1000 mm Neck diameter: 350 mm Cedpex Nvqdofx Anteha Spindle speed (rpm): 3500 Machinable material types: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek.

Condition: good (used), Year of construction: 2004, spindle speed (min.): 3,500 rpm, travel distance Z-axis: 1,000 mm, Model Year: 2004 Chuck Diameter: 12" Number of Axes: 2 Length: 1000 mm Swing Over Bed: 350 mm Chedpfxsx Nvpas Antoa Spindle Speed (RPM): 3500 Processable Materials: Steel, Aluminum, Titanium, Graphite, Copper, Invar, Composite, Delrin, Peek

Condition: used, Year of construction: 1998, operating hours: 97,593 h, functionality: fully functional, turning diameter: 65 mm, spindle bore: 79 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 25 rpm, For Sale: Gildemeister MF Sprint 65 CNC Sliding Headstock Lathe with 3-Meter Bar Feeder, as shown in the pictures. The machine was removed from our workshop in fully functional condition. A video of the machine in operation prior to disassembly is available upon request. Approximately five years ago, the linear guides of the X1 and Z1 slides (on the main spindle side) were replaced, including bearings and belts. A new HMI interface was installed recently. Detailed specifications and technical data can be found in the attached PDF. TECHNICAL DATA Control: Sinumerik 840C Bar Feeder: SIMAG 65.1-3200G, Year of Manufacture: 1998 Bar Length: 3 meters Bar Diameter / Spindle Bore: 65 mm Main Drive Power Output: 28 / 21 kW Speed Range: 25 – 4,500 rpm Torque: 320 / 240 Nm Maximum Feed Rate for Thread Cutting: 10 m/min C-Axis Speed: 120 rpm C-Axis Torque (Holding Torque): 180 Nm Tool Carrier Number of Tool Stations: 8 Shank Diameter (DIN 69880): 30 mm Number of Driven Tool Stations: 4 Power Output: 7.6 / 4.6 kW Torque: 24 / 14.7 Nm Maximum Speed of Tool Carrier 1: 4,000 rpm Maximum Speed of Tool Carrier 2: 4,000 rpm Slide 1 Cross Travel / Longitudinal Travel: 155 / 280 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN Slide 2 Cross Travel / Longitudinal Travel: 82 / 120 mm Rapid Traverse Speed X/Z: 22.5 / 22.5 m/min Feed Force X/Z: 900 / 900 daN MACHINE DATA Dimensions with Bar Feeder and Chip Conveyor (L × W × H): approx. 6 × 2 × 2 meters Weight: approx. 6.5 tons Operating Voltage: 50 Hz, 400 V Accessories: Chodpfx Aowym Nfentea Cooling System Chip Conveyor Documentation The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: good (used), Year of construction: 2008, 1 used CNC turning/milling center Gildemeister type TWIN 65 RG 2 year 2008 with Siemens 840 D Maximum turning length (travel in the Z axis) 650 mm Maximum turning diameter over bed 250 mm Maximum length of travel in the X-axis 300 mm Maximum feed speed X-axis 30 m/min Maximum feed speed Z axis 30 m/min Maximum main spindle power 35 kW Spindle diameter 65 mm Minimum main spindle speed 20 1/min Maximum main spindle speed 5000 1/min Lathe length 7000 mm Lathe width 4700 mm Lathe height 2500 mm Lathe weight 10 t Machine equipment Y axis Irco loading magazine ILS RBK 1200 mm Workpiece pick-up device Csdeq T I Izopfx Antjha Technical data Errors excepted Please note that the machine is sold without chucks, as these remain with the seller!