Used Gildemeister Gmx for sale (240)

Condition: good (used), Year of construction: 2003, turning length: 1,505 mm, Turning & Milling Center GILDEMEISTER GMX 400 linear Year of manufacture: 2003 Control: Sinumerik Power line Technical Specifications: Main spindle drive power ISM 90: 36/45 kW (100/40%) Main spindle speed: Main spindle torque: Bar capacity: 90 mm Number of magazine positions: 120 pcs Milling spindle tool holder: HSK 63 Counter spindle drive power ISM 90: 36/45 kW (100/40%) Counter spindle speed: Counter spindle torque: Bar capacity: 90 mm B-axis / Milling spindle: Drive power: Speed: Torque: Tool holder: HSK z3 Lower turret: X-axis: Z-axis: Speed, driven tools: Number of turret stations: 12 pcs Tool holder: VDI 40 Accessories: - Chip conveyor Cedpswzbq Tjfx Af Ashc - High-pressure unit with 20 bar - Preparation for 3D measuring probe - Tailstock function on counter spindle - Automatic sliding doors

Condition: used, Year of construction: 2004, operating hours: 11,022 h, functionality: fully functional, machine/vehicle number: 07520000211, turning length: 1,070 mm, turning diameter over cross slide: 400 mm, turning diameter: 560 mm, spindle motor power: 37 W, spindle speed (max.): 4,000 rpm, spindle bore: 79 mm, travel distance X-axis: 485 mm, travel distance Y-axis: 160 mm, rotational speed (max.): 12,000 rpm, Equipment: rotational speed infinitely variable, Gildemeister GMX 200 Linear with tailstock and steady rest for sale. Included are a coolant treatment system and a quality selection of tools HSK 63 - A, approximately 40 tools. Also included is a Berg chuck, see photos. The machine is being sold due to lack of orders. 49,700 power-on hours, 11,022 spindle hours. The machine can be inspected and tested at any time. Loading is possible without any issues. Chedpfoug Uc Nox Af Ajc

Condition: good (used), Year of construction: 2004, functionality: fully functional, Gildemeister GMX 400 Year of manufacture: 2004 Control system: Siemens 840 D Powerline Max. turning diameter: 640 mm Turning length: 1,585 mm Cjdpfx Afoytpfzs Aehc Standard turning diameter: 400 mm Control: Sinumerik 840D powerline Siemens Distance between centers: 1,930 mm Main spindle: Type: ISM 90 Max. speed: 4,000 rpm Drive power - main spindle: 36 / 45 kW Max. torque: 600 Nm Spindle diameter front bearing: 150 mm Spindle bore: 107 mm Max. bar diameter: 102 mm C-axis: 0.001° Chuck diameter: 315 (max. 400) mm Milling spindle: Max. speed: 12,000 rpm Drive power - milling spindle: 13.2 / 22 kW Max. torque: 100 Nm Tool holder: HSK-A63 Holding torque: 500 Nm y-axis: +/- 110 mm b-axis: +/- 120° c-axis: 1° x-travel: 550 mm Bearing diameter: 80 / 55 mm Tool magazine: Number of tool slots: 120 positions Tool holder: HSK-A63 Max. tool length: 350 mm Chip conveyor Feeds: Rapid traverse X1/Z1: 40/60 m/min Total power requirement: 70 kVA Machine weight approx.: 20.0 t

Condition: used, DMG Gildemeister GMX 400 linear multi-tasking twin spindle CNC lathe with Siemens 840D control & pneumotec gantry parts loading system with coolant paper filtration system, chip conveyor, IFM mist extraction unit, oil chiller, automatic doors, foot switches, wash gun, handwheel, signal tower & manuals. Overall dimensions: L9,347mm x W4,646mm x H3,018mm. Weight 24,000kg. With dual rohm KUBF-400/4 Ø400mm power chucks. Swing Ø640mm. Maximum turning Ø640mm. Maximum turning length 1,500mm. Axis travel 'X1'=550mm, 'Y'=220mm, 'Z1'=1,585mm, 'X2'=225mm, 'Z2'=1,400mm, 'Z3'=1,500mm, 'B'= ±120°. Rapid travere 'X'=40m/min, 'Y'=24m/min, 'Z'=60m/min. Spindle bore Ø107mm. Csdpfxsz Hzuwo Af Ajhc Maximum bar capacity Ø92mm. Maximum main spindle speed 4,000rpm (45kW Motor). Maximum sub spindle speed 4,000rpm (45kW Motor). Maximum rotary spindle speed 12,000 (22kW Motor). Rotary spindle taper capto C6. 60 position ATC. 12 position sauter turret. 20 position loading station with air blast cleaning tank.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 640 / 400 mm turning length: 1500 mm control: Siemens 840 D Powerline Cedpjyv Dnkefx Af Ajhc Travel turret No.1 (milling spindle) x/y/z: 550 / 180 (±90) / 1585 mm Swivle angle milling spindle (B-axis): ±120° interpol. ° Rapid traverse feeds turret 1 (milling head) x/y/z: 40/24/60 m/min RPM milling spindle: 12000 1/min power capacity - milling spindle: 12 / 23 kW Torque of milling spindle: 100 Nm Tool magazine for milling spindle (turret 1): 120 HSK-A 63 Tool change time tool/tool, milling spindle: 1,6 s Spindle 1 RPM: 4000 1/min Spindle 1 power: 36/ 45 kW Spindle 1 Torque: 730 Nm Spindle 1 max. bar diameter: 90 Spindle 2 RPM: 4000 1/min Spindle 2 power: 36 / 45 kW Spindle 2 torque: 730 Nm Spindle 2 max. bar diameter: 90 c-axis: 0,001 ° Travel turret 2 x: 225 mm Travel Turret 2 z: 1595 mm RPM of rotary tools turret 2: 4000 1/min no. of tools in turret 2: 12 VDI 40 high-pressure pump: 20 bar total power requirement: 110 kVA weight of the machine ca.: 24 t dimensions of the machine ca.: 9,3 x 4,6 x 3,1 m Accerories Chip conveyor Automatic door High performance turning and milling center with milling head (X, Y, Z, B-Axis), tool magazine with 120 pos. HSK-A 63. Excellent for manufacturing excentric parts. Coolant system with 1000 l tank and coolant system 4 kW. Both spindles have differencial pressure clamping system Steayrest for lower turret dia 8-101 mm. Parts gripper for turret No. 2 with 3-jaw chuck for parts with max. dia. 140 mm. Conveyor belt for finished parts. Preparation for 3D-probe Toolmonitor Artis Machine can be shown under power. *

Condition: used, Year of construction: 2005, turning diameter 640 mm turning length 1.185 mm control SINUMERIK 840D swing diameter 640 mm distance of spindle heads 1500 mm slide I: X1 / Y1 / Z1 / B slide travel X-axis 550 mm slide travel Z-axis 180 mm Z- Travel 1.185 mm B - axis 240 ° feed x-axis 0 - 40.000 mm/min feed y- axis 1 - 24.000 mm/min Feed z- axis 1 - 70.000 mm/min feed B-axis 1 - 20 1/min rapid traverse X/Y/Z 40 / 24 / 70 m/min feed capacity X/Y/Z S6: 7,00/11,00/7,50 kN tool taper HSK 63 turning speed milling-spindle 10 - 12.000 1/min power capacity at 100 % load 13,20 kW power capacity at 40 % load 22,00 kW torque milling spindle 60 / 100 Nm no. of workpieces in the magazine 46 Stück Csdpfx Aoydflljf Ajhc tool length - max. 350 / 200 mm tool diameter 80 mm wotkpiece diameter with 2 vacant positions 120 mm weight of tools max. 6 / 10 kg slide II: X2 / Z2 slide travel X-axis 180 mm Z- Travel 1.050 mm feed x-axis 1 - 24.000 mm/min Feed z- axis 1 - 36.000 mm/min rapid traverse x + z axis 24 / 36 m/min feeding force S6: 11,00/9,00 kN turret (x-stations) 12 tool taper DIN 69880 Ø40 Driven tools - quantity 12 Driven tool turning speed 1 - 4.000 1/min power capacity at 100 % load 10,70 kW torque S1: 32 Nm Slide III - longitudial travel Z3 mm Z- Travel 1.150 mm Feed z- axis 1 - 36.000 mm/min rapid traverse Z-axis 36,00 m/min feed capacity Z - axes S6: 13,00 Nm Main spindle ISM90 turning speed main-spindle 10 - 4.000 1/min power capacity at 100 % load 36,00 kW power capacity at 40 % load 45,00 kW max. torque at 40% / 100% load 800 / 630 Nm spindle bore 80 mm turning speed opposed-spindle 10 - 5.000 1/min power capacity at 100 % load 21,00 kW power capacity at 40 % load 28,00 KW max. torque at 40% / 100% load 320 / 240 Nm spindle bore 80 mm total power requirement 70,00 kW weight of the machine ca. 20,00 t dimensions of the machine ca. 8,50 x 4,50 x H3,10 m Machine with SIEMENS SINUMERIK 840D control, main- and counter-spindle, chip conveyor, dust exhauster, DMG-automation WH10top. Main-spindle ISM90: hollow clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter-spindle ISM76: closed center clamping device, C-axis, 3-jaw hydraulic chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-up device with integrated conveyor belt, automatic protective cover, differential pressure clamps. Incl. pump-frame for coolant - Pump 1: 17 l/min at 80bar - Pump 2: 20 l/min at 8bar - Pump 3: 40 l/min at 20bar Without coolant unit. Was connected to a central coolant-system. Accessories: Hainbuch collet chuck incl. collets Ø30,45,50,55,60,65,72,82,85,90 1 piece workpiece pick-up-gripper for turret

Condition: used, Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, Control system: HEIDENHAIN Plus iT with Turn Plus Turning length: 1175 mm (tailstock machine 1100 mm) Tool holder: HSK 63A (DIN 69893) Tool magazine: 1 x 36-position disc magazine Cedjzx Agzepfx Af Aehc Note: We offer flexible financing solutions for all machines as well as a professional relocation service. Dismantling, transport, and expert reassembly – all from a single source. Billing based on individual terms and conditions and duration. Contact us for your personal offer.

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Cedpowmdv Aofx Af Aohc

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, turning length: 1,185 mm, turning diameter: 640 mm, spindle speed (max.): 4,000 rpm, turning diameter over bed slide: 640 mm, counter spindle torque (max.): 5,000 Nm, Turning and Milling Center with Main and Counter Spindle and Comprehensive Equipment! TECHNICAL DETAILS Turning diameter: 640 mm Turning length: 1,185 mm Swing diameter: 640 mm Distance between headstocks: 1,500 mm SLIDE I X-Axis travel: 550 mm Y-Axis travel: 180 mm Z-Axis travel: 1,185 mm B-Axis: 240° Feed rate X-axis: 0 – 40,000 mm/min Feed rate Y-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 70,000 mm/min Feed rate B-axis: 1 – 20 rpm Rapid traverse X/Y/Z: 40 / 24 / 70 m/min Feed force X/Y/Z S6: 7.00 / 11.00 / 7.50 kN Tool interface: HSK 63 Milling spindle speed: 10 – 12,000 rpm Drive power 100% duty cycle: 13.20 kW Drive power 40% duty cycle: 22.00 kW Milling spindle torque: 60 / 100 Nm Max. tool length: 350 / 200 mm Tool diameter: 80 mm Tool diameter with 2 free pockets: 120 mm Max. tool weight: 6 / 10 kg SLIDE II X-Axis travel: 180 mm Z-Axis travel: 1,050 mm Feed rate X-axis: 1 – 24,000 mm/min Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse X + Z axes: 24 / 36 m/min Feed force Z / X S6: 11.00 / 9.00 kN Turret (positions): 12 Tool holder: DIN 69880 Ø40 Driven tool positions: 12 Speed: 1 – 4,000 rpm Drive power 100% duty cycle: 10.70 kW Torque S1: 32 Nm SLIDE III Z-Axis travel: 1,150 mm Feed rate Z-axis: 1 – 36,000 mm/min Rapid traverse Z-axis: 36 m/min Feed force Z-axis S6: 13.00 Nm MAIN SPINDLE Model: ISM90 Speed: 10 – 4,000 rpm Drive power 100% duty cycle: 36.00 kW Drive power 40% duty cycle: 45.00 kW Torque at 40% / 100% duty cycle: 800 / 630 Nm Spindle bore: 80 mm COUNTER SPINDLE Speed: 10 – 5,000 rpm Drive power 100% duty cycle: 21.00 kW Drive power 40% duty cycle: 28.00 kW Torque at 40% / 100% duty cycle: 320 / 240 Nm Spindle bore: 80 mm MACHINE DETAILS Electrical Data Total power requirement: 70.00 kW Dimensions & Weight Machine weight: approx. 20.00 t Chsdpewyvc Uofx Af Ajc Footprint: approx. 8.50 x 4.50 x H3.10 m Control Control manufacturer: Siemens Control model: SINUMERIK 840D EQUIPMENT Chip conveyor Oil mist separator DMG Automation WH10top Main spindle ISM90: Hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Counter spindle ISM76: Partial hollow chuck, C-axis, 3-jaw power chuck SMW-AUTOBLOK KNCS-NB-315-91 Pick-off unit with integrated conveyor belt Automatic safety cover Differential pressure clamping With pump stand for coolant: Pump 1: 17 l/min at 80 bar / Pump 2: 20 l/min at 8 bar / Pump 3: 40 l/min at 20 bar Hainbuch collet chuck including collets Ø30, 45, 50, 55, 60, 65, 72, 82, 85, 90 1 workpiece pick-off for turret

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, turning length: 1,585 mm, turning diameter: 300 mm, controller model: Siemens 840D Powerline, number of slots in tool magazine: 120, No minimum price – guaranteed sale to the highest bidder! Chedpey Dqtijfx Af Asc TECHNICAL DETAILS Turning length: 1,585 mm Turning diameter: 300 mm Tool magazine capacity: 120 positions MACHINE DETAILS Control: Siemens 840D Powerline EQUIPMENT Sub spindle C-axis Hollow clamping device (diameter 68 mm) on main spindle, left Measuring device with probe Oil mist separator

Condition: good (used), Year of construction: 2016, operating hours: 23,500 h, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, total length: 7,500 mm, total height: 2,500 mm, total width: 1,600 mm, number of spindles: 2, Equipment: documentation/manual, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Center Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as conversion kit to long turning center (Swisstype kit) for short and long turning on one machine. Delivery conditions: Free on truck. Location: 58332 Schwelm Availability: Immediate - by arrangement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; the exact date will be provided in advance! Payment terms: Payment in advance - by bank transfer. Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW COUNTER SPINDLE DATA: Max. turning diameter: 32 mm (bore for draw tube: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Diameter of tool holder: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Diameter of tool holder: 25 mm Scope of supply: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & weights: Installation dimensions L x W x H approx.: 7500 x 1600 x 2500 mm Weight approx.: 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ►If desired, we can offer transport to the destination. Csdpfjzxhdlox Af Aehc ►The quoted price is net plus VAT. ►The goods are sold excluding any warranty. ►Technical data is without guarantee. ►Subject to prior sale. ❗The sale of the goods is exclusively to business customers❗

Condition: ready for operation (used), Year of construction: 2008, operating hours: 51,226 h, functionality: fully functional, turning length: 1,175 mm, spindle speed (max.): 5,000 rpm, controller model: HEIDENHAIN Plus iT, number of slots in tool magazine: 36, TECHNICAL DETAILS Maximum spindle speed: 5,000 rpm Turning length: 1,175 mm Turning length with tailstock: 1,100 mm Chedpfozqfvvsx Af Aec Tool holder: HSK 63A according to DIN 69893 Number of tool magazine positions (disc magazine): 36 MACHINE DETAILS Control system: HEIDENHAIN Plus iT with Turn Plus

Condition: good (used), Year of construction: 2003, functionality: fully functional, turning length: 600 mm, turning diameter: 324 mm, travel distance X-axis: 260 mm, travel distance Z-axis: 635 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, GILDEMEISTER CTX 420 linear V3 Year of manufacture: 2003 Control system: Heidenhain Plus IT / DataPilot Machine type: CNC turning machine Design: C-axis and driven tools Working area: Swinging diameter over bed: 680 mm Swinging diameter over cross slide: 565 mm Max. turning diameter: 324 mm Max. turning length: approx. 600–635 mm Travel in X-axis: 260 mm Travel in Z-axis: 635 mm Main spindle: Speed range: 20–5,000 rpm Drive power: 37 / 25 kW Max. torque: approx. 390 / 270 Nm Bar diameter: approx. 65 mm Spindle bore: approx. 79 mm Tool turret: 12-position Sauter tool turret Tool holder: VDI 30 Driven tool stations: up to 12 Speed of driven tools: up to approx. 4,500 rpm Power of tool drive: approx. 12.2 kW C-axis: C-axis available Rapid traverse rates: Rapid traverse rate X-axis: up to 60 m/min Rapid traverse rate Z-axis: up to 45 m/min Tailstock: Tailstock available Arbor mounting: MK 5 Tailstock travel: approx. 580 mm Machine data: Machine weight: approx. 6,000–6,500 kg Dimensions L x W x H: approx. 3,500 x 2,460 x 2,100 mm Typical equipment: Driven tools C-axis 12-position turret Cedpfjz Iqc Hjx Af Ashc Tailstock Chip conveyor Coolant system

Condition: excellent (used), Year of construction: 2011, operating hours: 7,541 h, functionality: fully functional, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, spindle bore: 65 mm, type of input current: three-phase, total height: 2,067 mm, total length: 5,671 mm, total width: 2,721 mm, overall weight: 8,000 kg, spindle diameter: 250 mm, Equipment: documentation/manual, Main spindle: 25 kW, 5000 rpm, SMW Autoblock chuck diameter: 250 mm, bar diameter: 65 mm. Counter spindle: ISM52, 20 kW, 6000 rpm, SMW Autoblock chuck diameter: 210 mm. Turning and milling spindle (B-axis): HSK63A, 18000 rpm, external/internal coolant with high-pressure flushing at 20 bar. Csdpfez Dpm Nex Af Aehc Direct axis measurement. Tool magazine for 24 tools. Chip conveyor, extraction system with filtration. The delivery includes various HSK63A tool holders. Direct sales to end users only. W-Technology s.r.o. Polní 8 79201 Bruntál Czech Republic

Condition: excellent (used), Year of construction: 2005, Gildemeister GLD25 Machine in very good operating condition. Cedpfx Afozvpaio Ajhc It can be inspected at any time during production. Only 10,800 operating hours.

Condition: used, Year of construction: 2016, operating hours: 18,071 h, functionality: fully functional, machine/vehicle number: 06960000941, spindle motor power: 25,000 W, spindle speed (max.): 5,000 rpm, rapid traverse Y-axis: 30 m/min, torque: 280 Nm, input voltage: 400 V, overall weight: 6,000 kg, power: 25 kW (33.99 HP), input frequency: 50 Hz, controller manufacturer: Siemens, controller model: Sinumerik 849D sl, input current: 63 A, tool type: VDI 40, number of axes: 3, DMG MORI CTV 250, 2nd Generation – Vertical Turning Center (Pick-up), Year of Manufacture 2016 For sale is a well-maintained DMG MORI (Gildemeister) CTV 250, 2nd Generation, manufactured in 2016, with only 18,071 spindle hours. The machine is fully equipped for automated series production of chucked parts and is currently still powered on – inspection and demonstration possible by arrangement. Control System & Drive Siemens Sinumerik 840D sl (Slimline) including ShopTurn option AC main drive 25 / 32 kW, torque 280 / 360 Nm Spindle speed up to 5,000 rpm, duty cycle 100 % / 40 % Hollow cylinder, programmable clamping pressure via NC program Axes & Tools 12-station turret (disc diameter 340 mm), all stations powered (UDI 40) C-axis with powered tool system Y-axis +90 / -65 mm Linear guides, ball screws, glass scales, AC servomotors with absolute encoder Rapid traverse 30 m/min Automation & Metrology Workpiece transport system SRA 160 (drag chain, NC-controlled) including drag chain set Storage capacity: 30 parts (Ø 30–70 mm, max. 7 kg) or 18 parts (Ø 30–100 mm, max. 15 kg), max. total weight 320 kg including pallets Workpiece diameter 30–160 mm, workpiece height max. 160 mm Robot interface Profinet (electrical interface for 6-axis robot) Workpiece probe Renishaw LP2DD at the loading/unloading station, measuring accuracy 10 µm, with air blow cleaning Coolant & Peripherals Chedpfszi R R Nsx Af Asc Coolant system 8 / 20 bar, tank 600 l, high-pressure pump 20 bar / 40 l/min Coolant supply via turret disc to all stations Band filter system 40 µm with forced indexing, coolant level monitoring Hinged belt chip conveyor with extended discharge chute (+300 mm), enlarged chip container, modified sludge pump Aluminum machining package Integrated work area extraction max. 400 m³/h, work area flushing with 3 flushing nozzles Cabinet cooling up to 40 °C, hydraulic oil cooler Air blower via main spindle, 4-color signal light Remote diagnostics via the internet Connection values: 400 V / 50 Hz, 40 kVA, 63 A · Weight: approx. 6,000 kg Sale from current location, dismantling/loading/transport by arrangement or by the buyer. Sale is subject to the exclusion of all warranties (commercial sale of used machines, sold as seen). Please contact us if you have any questions or would like to arrange a viewing.

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 320 mm, travel distance Z-axis: 1,097 mm, controller manufacturer: SIEMENS, controller model: 840D, number of axes: 3, Horizontal turning machine manufactured in 2000. This Gildemeister CTX 500 S2 features a maximum turning diameter of 455 mm and a turning length of 1097 mm. It includes a robust tool system with a disc turret and a maximum chuck diameter of 315 mm. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 500 S2 machine we have for sale. Contact us for further details. Chodpfx Asz Iqnpjf Ajc - Max. Swing Over Bed / Slide: 680 mm / 670 mm- Max. Turning Diameter over Face Slide: 455 mm- Max. Turning Length: 1097 mm / 2097 mm- Spindle Head Flange: 220 mm (Size 220h5)- Spindle Bore: 107 mm- Spindle Bearing Front Diameter: 140 mm- Max. Chuck Diameter: 315 mm / 400 mm- Tailstock Quill Taper: MK 5 / MK 6- Tailstock Quill Diameter: 120 mm- Tailstock Quill Stroke: 120 mm- Tool System: Disc Turret- Number of Slide Carriage Sets: 1- Number of Face Slides: 1- Longitudinal Stroke: 1097 mm / 2097 mm- Face Stroke: 320 mm- Max. Torque: 650 Nm / 2000 Nm- Feed Force (Longitudinal / Plan): 1 N / 8000 N- Rapid Feed (Longitudinal / Plan): 30 m/min / 24 m/min- Feed Speed Range: mm/min- Main Drive Motor Type: B3- Feed Drive X-Plan Motor: Siemens 1FK6063-6AF71-1AH0 (1.9 kW, 3000 rpm, IP64)- Feed Drive Z-Longitudinal Motor: Siemens 1FK6101-8AF71-1AG0 (4.9 kW, 3000 rpm, IP64)- Lubrication Motor: Vögele 113.50.000701C (0.13 kW, 2200 rpm, IP44)- Hydraulic Motor: 2.2 kW, 1450 rpm, IP54- Connected Load / Power Requirement: 58 kVA- Voltage: 400 V- Frequency: 50 Hz- Current: 85 A- Fuse Rating: 100 A- Control Voltage: 230 V AC / 24 V DC- Floor Space Required: 8.41 m x 4.3 m x 2.41 m (5607/6657 x 3285 x 2405 mm)- Machine Weight: 8700 kg / 10000 kg- Additional Equipment: Chip conveyor with chip container, coolant system, exhaust filter unit (IFM) Technical Specification Counter Spindle No Driven Tools Yes

Condition: ready for operation (used), Year of construction: 2016, operating hours: 23,500 h, functionality: fully functional, machine/vehicle number: 8107000021B, spindle bore: 32 mm, spindle speed (max.): 8,500 rpm, overall weight: 4,300 kg, controller model: FANUC 32i MB, bar length: 3,200 mm, DMG MORI GILDEMEISTER SPRINT 32/5 – Short/Long Turning Automaton Csdpfxoz A Tbue Af Ajhc Well-maintained machine, low operating hours, including IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016, as well as a conversion kit to a long turning automaton (Swisstype kit) for short and long turning on a single machine. Delivery terms: Free on truck Availability: Immediate - subject to agreement NOTE: The machine must be picked up on a fixed date in mid/late October 2026; we will provide the exact date in advance! Technical data: Control: FANUC 32i MB Operating hours recorded: 25,263 Spindle hours recorded: 22,772 MAIN SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z1: 100 mm Max. speed: 8,500 RPM Drive power S1: 5.5 kW TAILSTOCK SPINDLE DATA: Max. turning diameter: 32 mm (guide bushing bore: 38 mm) Stroke Z2: 200 mm Max. speed: 8,500 RPM Drive power S1: 2.2 kW AXIS DATA X1: Travel: 70 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² AXIS DATA Y1: Travel: 405 mm Max. speed: 30 m/min Max. acceleration: 5 m/s² AXIS DATA X2: Travel: 300 mm Max. speed: 40 m/min Max. acceleration: 5 m/s² TOOL HOLDER DATA – SLIDE 1: Tool holder diameter: 25 mm Number of fixed tools for external machining: 6 Tool holder size: 16 × 16 mm Number of driven tools: 4 Collet type: ESX20 TOOL HOLDER DATA – SLIDE 2: Number of fixed tools for internal machining: 4 Tool holder diameter: 25 mm Scope of delivery: IEMCA BOSS 338/32 HD bar feeder (up to 3,200 mm bar length), year of manufacture 2016 Chip conveyor Available manuals Accessories as shown in the pictures Dimensions & Weight Footprint (L x W x H): approx. 7500 x 1600 x 2500 mm Weight: approx. 4300 kg Attention: Disc damaged! If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional notes: ► Upon request, we can offer transport to your destination. ► The goods are sold without any warranty. ► Technical data is subject to change.

Condition: good (used), Year of construction: 2008, functionality: fully functional, The machine is in good technical condition. Swinging diameter over the bed: 500 mm Distance between centers: 780 mm X-axis travel: 200 mm Y-axis travel: 80 mm Control system: Siemens 840 Total operating hours: 26,501 h Max. turning length: 500 mm Maximum turning diameter: 200 mm Chedpoz Hldcofx Af Aec Turning diameter over the bed (max): 500 mm Distance between centers: 780 mm Maximum spindle speed: 6000 rpm Workpiece weight: 45 kg Weight: 4500 kg Filtration system Includes a CNC Spacesaver SS 2500 bar feeder (2018) Inspection in operation is possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 2005, operating hours: 48,000 h, functionality: fully functional, turning length: 1,080 mm, turning diameter: 600 mm, spindle speed (max.): 2,500 rpm, total height: 2,140 mm, total length: 5,300 mm, total width: 2,160 mm, overall weight: 9,000 kg, spindle diameter: 530 mm, Equipment: documentation/manual, Gildemeister CTX 620 — это тяжёлый токарно-фрезерный ЧПУ-станок, предназначенный для обработки крупных и сложных деталей. Станок оснащён гидравлическим патроном 21″, системой управления Siemens Sinumerik 840D, а также осью C, осью Y и приводным инструментом, что позволяет выполнять на одном станке токарную обработку, фрезерование, сверление, нарезание резьбы и другие операции. Большая рабочая зона, высокая жёсткость конструкции и мощный шпиндель позволяют выполнять как тяжёлое черновое точение, так и точную чистовую обработку деталей большого диаметра и длины. CTX 620 особенно хорошо подходит для серийного производства, где важно сократить количество установок детали и обеспечить стабильную точность обработки. Codpfxoz Ehgqs Af Ajhc

Condition: good (used), Year of construction: 2008, functionality: limited functionality, machine/vehicle number: 8086010539B, spindle motor power: 5,500 W, spindle speed (max.): 6,500 rpm, spindle bore: 46 mm, type of input current: three-phase, bar passage: 42 mm, bar diameter (max.): 42 mm, overall weight: 4,700 kg, DMG Gildemeister Sprint 42 linear CNC turning center with FANUC 160i control and IEMCA Boss 545-E bar feeder. The machine is a compact and productive CNC twin-spindle turning center for the series production of bar stock parts up to 42 mm in diameter. Thanks to its main spindle, counter-spindle, 6 linear axes, 2 channels, and powered tools, the machine is particularly suitable for precise turning, drilling, milling, and complete machining operations in medium to high volumes. The machine is available including the bar feeder and chip conveyor. On-site inspection is possible by arrangement. Machine data: Manufacturer: DMG / Gildemeister Italiana Model: Sprint 42 linear Machine No.: 8086010539B Year of manufacture: 2008 Control: FANUC 160i User interface: DMG SlimLine / TFT 15" Spindles / C-axes: 2 Number of axes: 6 Number of channels: 2 Max. bar diameter: 42 mm Main spindle max. speed: 6,500 rpm Counter spindle max. speed: 6,500 rpm Installed power: 40 kVA Operating voltage: 400 V / 50 Hz Base machine weight: approx. 4,700 kg Travel distances: X1: 65 mm Y1: 350 mm Z1: 120 mm X2: 265 mm Y2: 326 mm Z2: 320 mm Spindle data: Main spindle: Chjdpfxozkh Ius Af Aec Max. bar diameter: 42 mm Guide bushing bore: 46 mm Max. speed: 6,500 rpm Nominal power: 5.5 kW Nominal torque: 37.5 Nm Counter spindle: Guide bushing bore: 38 mm Max. speed: 6,500 rpm Nominal power: 3.7 kW Nominal torque: 19.6 Nm Bar feeder: Manufacturer: IEMCA Model: Boss 545-E Type: 32 LL Year of manufacture: 2007 Serial No.: 020722GA10 Weight: approx. 860 kg Voltage: 400 V / 50 Hz Compressed air: 6 bar Weight: 860 kg Location: Bocholt Availability: immediately available Inspection: possible by arrangement Loading / Transport: for collection

Condition: like new (used), Year of construction: 2019, operating hours: 44,087 h, functionality: fully functional, machine/vehicle number: 02620000651, overall weight: 6,360 kg, Equipment: documentation/manual, Gildemeister/DMG Mori CTX 2500/700 CNC Turning Machining Center (2019) – used and operational The machine is operational and in good condition, and is available for any testing. Year: 2019 Technical details: Serial No.: 02620000651 Driven spindles: Rated speed: 4,000/5,000 rpm Net weight: 6,360 kg Total operating hours: 44,087 h Spindle hours: 27,832 h Cooling unit Chip conveyor Chodpjzxxh Uefx Af Ajc Coolant treatment system Control system Manufacturer: DMG Mori Model: Ergoline Tool turret 14 positions For driven tools Condition: very good, operational Ready for immediate delivery The machine runs without any problems. The machine is available at H.B.R. srl – Calolziocorte (LC) – Italy. You can inspect and test the machine with your own staff.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. Codpfx Afjzzyt Ds Ashc No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Year of construction: 2007, functionality: unexamined, machine/vehicle number: 2601-0324, The Sprint 42 Linear from DMG Gildemeister is a CNC turning/milling center with 6 linear axes and 2 C-axes. Direct drives enable high acceleration and precise machining operations. It is suitable for demanding series production of parts with a bar diameter of up to 42 mm. Cedpfxszkgqze Af Aohc Year: 2007 Spindles: Main and counter-spindle, each up to 6,500 rpm; bar passage through main spindle 42 mm, counter-spindle 38 mm. Tool capacity: 26 stations, including up to 11 driven tools; turret with Y-axis for milling and threading operations. Axes / Travels: Slide 1: X1 = 65 mm, Z1 = 350 mm, Y1 = 120 mm Slide 2: X2 = 326 mm, Z2 = 320 mm, Y2 = 265 mm Rapid traverse rates: up to 30 m/min (X1, Z1, X2, Z2), Y2 up to 18 m/min Control system: FANUC 160i-TB with 15" DMG SlimLine panel Including IEMCA Boss 545-E bar feeder The IEMCA Boss 545-E bar feeder (Type 32 LL, year of manufacture 2007) is included in the scope of supply and enables the continuous feeding of material up to Ø 42 mm. It operates with 400 V / 50 Hz and requires 6 bar of air pressure; its own weight is approximately 860 kg. Main spindle newly bearing: The main spindle has already been overhauled (new bearing). Inspection & Collection: An on-site inspection is possible. If you are interested or have questions about technical details, please do not hesitate to contact us.

Condition: excellent (used), Year of construction: 2003, Sub-spindle, Y-axis, B-axis, C-axis SIEMENS 840D ShopMill Turning diameter max 246mm Turning length -445mm Cedpez Iaqgofx Af Aehc Spindle speeds main & sub-spindle -6'000 rpm Turret head: 12 driven positions B-Axis 440 mm Tool presetting device Tool catching attachement Misc. accessories MARCELS MASCHINEN CH