Used Glass Dishwasher for sale (3,761)

Year of construction: 2018, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: M iClean HM mit GIO, Our 10 Meiko pot washers with the model designation DV 80.2 PW and built in 2015 2016 are for sale. Condition good, ran partly with soft water. These machines are former leasing devices. With 6 months spare parts guarantee. Preventive maintenance was always carried out with the replacement of some wearing parts. Inspection and test run on site possible and desired. Technical specifications: Performance up to 60/40/17 baskets (corresponds to approx. 1080/720/306 plates or e.g. 2160/1440/612 glasses) per hour Program run times: 60/90/210 seconds Lajdpfjpy Dxrjx Apdog Basket dimensions in mm: 500 x 500 Insertion height: 440 mm Tank capacity: 22 l Water consumption per basket: 2.6 l Tank heater: 1.3 kW Boiler: 7.5 kW (cold water) Boiler: 9.0 kW (hot water) Material: stainless steel Connected load: 400 V / 11.2 kW (cold), 9.7 (warm) Dimensions: W 635 x D 750 x H 1470/2050 mm Electrical installation: Electrical connection: three-phase current 3 NPE, 400 V, 50 Hz. The circuit corresponds to the regulations of the VDE Water installation: The dishwashers can be connected to the fresh water network without the interposition of safety fittings. Minimum flow pressure 0.6 bar, maximum pressure 5 bar. The installation regulation EN 1717 must be observed. expiry ¾ ̋. On-site wall drain max. 700 mm high. Length of the connection lines approx. 1.8 m from the dishwasher. Collection of the machines desired. Dispatch by freight forwarder at cost assumption possible.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, 5-axis Milling Machining Centre | Brand: MATEC | Type: 30 HV Year of manufacture: 06/2008 Range of components: Steel, cast and welded structures. The large X-axis and the head, which can be swivelled through 105° in either direction, are ideal for multi-sided machining of long profiles or shafts. The machine can be inspected under power by appointment. Condition: In working order / ready for use. Operating hours ((September 7, 2026): Control on: 76.085 h Machine on: 62.198 h Program run: 26.653 h TECHNICAL SPECIFICATIONS Travels: - X-axis: 3.000 mm - Y-axis: 800 mm - Z-axis: 1.100 mm - A-axis: +/- 105° - B-axis: 360° - 1-axis NC swivel head, swivels through +/- 105 degrees - Speed range: 20 - 9.000 rpm - Drive power of motor spindle increased: 30 kW * Torque max.: 190 Nm * Boring capacity in steel: ca. 60 mm * Milling capacity: approx. 500 cm3 * Thread cutting: M30 SPECIFICATIONS: - CNC control system: HEIDENHAIN iTNC 530 - NC rotary table, brand: KESSLER, embedded in the machine table, SKH-NC 6/800 * Horizontal faceplate,diameter: 800 mm * Direct measurement system for the NC rotary table * Part accuracy: : +/- 12" * Load capacity max.: 2,5 tons * Tangential torque with clamping: max. 6.500 Nm, incl. motor (AC) with integrated rotary measuring system, hydraulic clamping and incl. additional CNC axis - Clamping plate: Width / length: 835 / 3.500 mm Number of T-slots: 7 Slot width: 18-H8 - Amperemeter for the main spindle drive - Tool magazine: 48 positions - Additional tool magazine: 48 positions, including tool changer, specialised software and control panel for loading tools whilst the machine is running in automatic mode - Working area: * Rapid speed: 30 m/min * Feed rate: 30.000 mm/min - Spindle: * Cone/tool holder: SK40, DIN 69871 * Rotational speed: 9.000 / 30 kW - Internal coolant supply 40 bar (paper belt filter, tank capacity: 450 l) - High coolant pressure at the external nozzles High-pressure coolant pump, switchable via the M function in the parts programme to the external nozzles on the headstock, 20 bar. - Coolant supply flow monitor - Compressed air through the tool - Centralised oil lubrication - Oil mist extraction system - Direct measurement system: X, Y and Z axes - 3D measuring probe, brand: RENISHAW RMP 60, with radio signal transmission for control, including control software - Tool breakage detection - Tool length measurement - Fully enclosed work area with a roof; a completely enclosed work area. The loading doors are designed in such a way that loading by crane is possible at any time whilst they are open. - Safety fence fitted to the machine - Stronger linear guides for the Y-axis = 800 mm X = size 65, Y + Z = size 55 - Bellows with steel vanes - Rinsing gun - Electronic handwheel (portable), brand: HEIDENHAIN HR 410 - Chip conveyor - Workstation lighting (2-light) - Extraction system - Safety/machine guard glasses are being replaced - Compressed air refrigeration dryers - Documentation - CE marking Special features: - Zero-point clamping system - Swiveling head - The CNC rotary table, in combination with the swivel head, enables 5-sided or 3D machining of workpieces The sale does not include any clamping devices. Lodpfxozyy Rmo Apdeag Without guarantee of completeness and correctness of the technical information and the equipment. - Subject to prior sale -

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: DM2AE437, number of ink cartridges: 6, color channels: CMYK + Weiß + Lack, number of print heads: 3, resolution (max.): 1,200 dpi, paper width (max.): 300 mm, paper height (max.): 420 mm, total length: 1,290 mm, total width: 1,355 mm, total height: 856 mm, counter reading (color): 41, type of input current: AC, input current: 5 A, input voltage: 230 V, Equipment: raster image processor, Title: Mimaki UJF-3042 MkII e (Year 2022) – Only 41 m² printed! Includes Kebab Option & Professional Free Package (SURA, UV DTF A+B Films, and Base Frame) Object Description: For sale is a top-of-the-line professional UV printing system: a Mimaki UJF-3042 MkII e (year 2022) including the high-quality Kebab option. The machine is being sold due to business closure and is a rare find on the used market: according to the meter reading, the machine has only printed a total of 41 m². You will receive a system in new condition at a fair used price. The machine has been meticulously maintained and was continuously connected to the power supply to ensure proper execution of the automatic maintenance and circulation cycles (preventing nozzle failures). Why proper pretreatment is so important in UV printing: A crucial factor in professional UV printing is the permanent adhesion of the color to challenging materials such as glass, metal, ceramics, or smooth plastics. Without special pretreatment, the ink can easily flake or scratch off. This is where the Pyrosil system (flaming unit) included in this offer comes into play: it creates an ultra-thin, invisible adhesive layer through silicidation and alters the surface tension. The result is an extreme, dishwasher-safe, and scratch-resistant bond between the material and the ink – absolutely essential for the professional and durable finishing of promotional items! Technical Highlights & Features: Model: Mimaki UJF-3042 MkII e (current generation) Year: 2022 Condition: Like new (only 41 m² total print volume) Configuration: CMYK + White + Varnish (LH 100) Kebab MkII Option: Included (original Mimaki device for 360° all-around printing on bottles, glasses, etc. – new price approx. €2,700) Software: RasterLink 7 RIP software included 🎁 EXCLUSIVE FREE PACKAGE (additional equipment worth approx. €4,000!) Since we are completely closing down the business, we are giving away the following professional equipment for pre- and post-treatment free of charge with the printer. A separate sale of these components is not possible – a real all-in-one package for your production start: 1. SURA Instruments Pyrosil GVE 2 HB Professional flaming unit for silicidation (surface pretreatment). Ensures extreme adhesion on glass, metal, and ceramics + plastics. Includes hand torch and gas hose. Important note regarding the condition: The hardware of the Suralink Pyrosil flaming device is in excellent condition. However, the included consumables have exceeded their expiration date and should be reordered by the buyer for professional production. Current new price: approx. €2,900.00 net 2. Material Starter Set Includes UV-DTF film set (A+B). 3. Robust machine base frame Custom-fit and stable table/stand for the Mimaki. Lsdpjyr Aiwefx Apdjag Ensures a safe, wobble-free stand during printing and the optimal, ergonomic working height. Pricing & Processing: The sale is made as a complete package with a proper invoice and VAT shown separately. Location & Collection: The machines are located in 33178 Borchen. An up-to-date nozzle test can be carried out during inspection. If you are interested or would like to arrange a viewing, please contact us directly via the messaging function.

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: EcoPurge30, pneumatic purging pump for 2K-metering pump max. flow: 6l/min max. pressure: 21MPa Laedpepz H Hqsfx Apdog pressure ratio: 30:1

Condition: like new (used), Year of construction: 2022, functionality: fully functional, horizontal glass drilling machine Ledpfx Apeyub Azedeag with extendable roller table 700 mm machine sizes : L : 1850 mm , H : 1800 mm , depth : 1200 mm

Condition: good (used), Year of construction: 2008, 10 cup wheels vertical glass edging machine with variable angle 0-45° total number of woreking meters : 179.000 min. glass size height : 70 mm speed : 0,5 - 5 m/min. Ljdpfx Ajx Hvxpopdsag glass thikness : 3 - 50 mm machine dimensions : L x W x H : 8,8 x 1,2 x 3 m weight : 4300 Kg

Condition: ready for operation (used), Year of construction: 2023, laser power: 1,20,000 W, This 3-axis Trotec Speedy 360 laser engraving machine was manufactured in 2023. It features a CO₂ laser with 120 W power and a work area of 610 x 305 mm. Capable of handling materials up to 10 mm thick, it supports a variety of materials including wood, acrylic, and glass. The machine includes an integrated extraction system and a color touchscreen interface. If you are looking to get high-quality engraving capabilities consider the Trotec Speedy 360 machine we have for sale. Contact us for more information. • Work area: 610 x 305 mm (24" x 12") • Maximum material thickness: 10 mm (varies by material) • Laser power: 120 W • Repeatability: ±0.01 mm • Resolution: 1,000 dpi • Control software: JobControl® Vision • Material handling: removable table for thick objects • Exhaust system: integrated extraction system • Connectivity: USB, LAN • Supported materials: wood, acrylic, plastics, glass, leather, paper, textiles, and more • Cooling: air-cooled laser tube • Interface: color touchscreen • Safety features: protective cover with interlocks Technical Specification Engraving Speed 3000 m/s Lajdpfx Ajx I S Nyjpdsg

Condition: used, functionality: fully functional, mileage: 3,81,656 km, power: 338 kW (459.55 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Lodozzyw Njpfx Apdsag Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white. Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: L3B031, IMA MISTRAL Y 16 Bottle/Can Air Rinsing Machine – Used, Immediately Available Machine Data: Model: IMA MISTRAL Y 16 Type: Automatic Bottle/Can Air Rinsing and Extraction Machine Serial No.: L3B031 Year of Manufacture: 2011/2012 Manufacturer: IMA S.p.A. / IMA Swiftpack (Italy) Electrical Specifications: 220/380 V, 3 phases, 50 Hz Space Requirements: approx. 400 × 140 × 220 cm Description & Features: This rotary air rinsing machine is designed for pharmaceutical and medical applications, suitable for GMP-compliant internal cleaning of stable, round glass or plastic bottles using sterile compressed air. • Fully automatic bottle cleaning and extraction • Processes up to 200 containers per minute • Includes format parts for plastic bottles Ø 44 mm × height 95 mm • Additional formats included: Ø 40 × 55 mm, Ø 60 × 130 mm • Operation: Bottles are single-lane fed via conveyor and screw separator, transferred into a carousel, gripped by tongs, rotated 180°, and cleaned with nozzles (blowing) and extraction heads (suction). Bottles are then transferred to the conveyor for downstream processing. • Suitable for bottles and cans made of plastic and glass • High level of automation, GMP-compliant design Documentation & Manuals: • Operating manuals (German, English, Italian) • Electrical circuit diagrams • Layout drawings / guards layout • Spare parts catalog • Blowing diagram / electrical diagram Lodpow Sfa Esfx Apdjag • FAT and SAT documentation • Machine and operator manual in German Scope of Supply: • Complete machine • Spare parts as per catalog • All original documentation (PDFs and printed documents) • Size parts for various bottle sizes Condition: • Used, from pharmaceutical production • Immediately ready for operation after installation • Available immediately Location: Çorlu, Turkey Price: On request

Condition: used, Year of construction: 2001, functionality: fully functional, Groninger Filling and Capping Line – Type DFK 6001 & KVK 206 Manufacturer: Groninger GmbH, Crailsheim Models: DFK 6001 (volumetric dosing filler) & KVK 206 (dropper inserter/capper) Year of manufacture: 2001 Machine No.: DFK 5265 / KVK 5266 Electrical connection: 220/380 V, 3 phase, 50 Hz Documentation: Machine and operating manual (German) available Line output: According to manufacturer: up to 9,000 units/hour Actual recent operation: approx. 8,000 units/hour Output infinitely variable Technical Data – Filler (DFK 6001): 6-head volumetric dosing filler for free-flowing liquids Currently equipped with stainless steel pumps (dosing range 10–133 ml) General dosing range: 0.15–266 ml Bottles up to Ø 100 mm, max. height 320 mm Subsurface filling possible (also for foaming products) Pumps can be quickly removed for cleaning and sterilization Filling needles are adjustable in height and laterally Operation via control panel (on right) and dial scale handwheel (at rear) Working area protected by folding glass doors Manual feed via rotary table Ø 1000 mm, onward transport via plastic slat-chain conveyor Technical Data – Capper (KVK 206): Dropper inserter & capping machine Performance range: Object Ø: 20–100 mm Object height: 30–250 mm Cap Ø: 10–60 mm Cap height: 10–60 mm Lasdpfxsw Sd Nro Apdsg Capacity: max. 9,000 units/hour Closures separated in sorting bowls, fed and placed automatically Press-fit stations and capping heads synchronized Torque clutch adjustable for defined closure force Finished, closed bottles ejected on the right Processed formats: 4 bottle formats: 40 / 50 / 80 / 125 ml Same droppers and screw caps for all formats Dimensions (approx.): Line: 700 × 270 × 225 cm Control cabinet: 180 × 60 × 220 cm Application areas: Pharmaceutical industry Cosmetics industry Chemical industry Special features: Compact, GMP-compliant stainless steel line Flexible dosing ranges, also suitable for foaming liquids Ready for immediate use Condition: Well-maintained used condition Available immediately from Çorlu, Turkey Price: On request

Condition: new, functionality: fully functional, Year of construction: 2026, The LCW 3000W is a compact and versatile 4-in-1 handheld laser system engineered for high productivity and operator convenience. Designed for industrial use, the machine unites welding, laser cleaning, cutting, and weld seam cleaning capabilities, making it highly suitable for manufacturing, repair, and maintenance environments. This unit is based on a Raycus 3000W fiber laser source and is equipped with an industrial water chiller for stable performance and outstanding reliability. Its touchscreen control system enables rapid parameter adjustments, saving of operating modes, as well as real-time diagnostics and warnings. An additional operator control panel ensures easy modification of parameters during use. The laser head is optimized for both welding and cleaning tasks, featuring optical protection and support for various welding processes, including spot welding, continuous welding, fish-scale welding, and full seam welding. The result is a clean, uniform, and visually appealing weld seam. The machine is also capable of removing rust, paint, resin, oil, dirt, and oxide layers from surfaces. Key Advantages: - 4-in-1 functionality: welding / cleaning / cutting / weld seam cleaning - Raycus 3000W fiber laser source - Handheld laser head for welding and cleaning - 10 m standard optical fiber length (up to 15 m maximum) - Intelligent touchscreen control system - Multi-language user interface - Industrial chiller-based water cooling - Red-light positioning feature - Automatic wire feeder - Supplied with safety glasses, working lens, standard accessories, and a spool of welding wire Technical Specifications: ----- Model: LCW 3000W Laser Type: Raycus Fiber Laser Laser Power: 3000 W Operating Voltage: 380 V Wavelength: 1064 nm Fiber Length: 10 m standard, up to 15 m maximum Welding Speed: 30–120 mm/s Cooling System: Industrial water chiller Ambient Operating Temperature: 15–35 °C Recommended Welding Thickness: 0.5–3 mm Cleaning Width: 0–80 mm Focal Length / Working Distance: 600 mm Applications The machine is suitable for: - Iron - Stainless steel - Aluminum alloys - Other metals Typical uses include: - Welding sheet metal and profiles - Pre-processing surface cleaning - Removal of rust, paint, oil, and oxides - Final weld seam cleaning Lodeyr D A Eepfx Apdoag Scope of Supply LCW 3000W machine complete with: - Handheld laser head - Automatic wire feeder - Laser safety glasses - Additional working lens - Spool of welding wire - Complete set of standard spare parts and accessories

Condition: used, mileage: 22,418 km, power: 79 kW (107.41 HP), first registration: 10/2020, fuel type: diesel, overall weight: 2,940 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 5,531 mm, total width: 2,059 mm, total height: 2,499 mm, loading space length: 2,900 mm, Year of construction: 2020, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Errors and prior sale excepted! Internal number: 0717. LB68927 ----EQUIPMENT * Front air conditioning including dust and pollen filter * LED lights in the cargo area * Cargo area protection package 1 - "Easy Clean" cargo area floor - high side panel lining * Transmission: 6-speed manual * Anti-lock braking system with electronic brake force distribution (EBD) * Driver's airbag * Exterior mirrors, manually adjustable (2) - with integrated turn signals * On-board computer with consumption and mileage information (e.g., remaining range) as well as outside temperature display and Ford ECO mode * Roof, medium * Headliner in driver's cab - up to the partition to the cargo area * Double-wing rear door with 180° opening angle (without window) * Tachometer * Third brake light * Electronic stability program (ESP) with traction control (TCS) - hill start assist - crosswind assist - emergency brake assist - rollover protection * Front power windows - with quick-down/up function for the driver's side * Ford Easy Fuel - convenient fuel filler cap and misfueling protection * Generator, high-performance version * Glove compartment with lid * Interior lighting with delay function * Cargo area lighting * Steering column, adjustable in height and reach * MyKey key system - individually programmable second key * Emergency brake assist including emergency brake lights * Particle filter: diesel particulate filter * Radio: Audiosystem 12 - radio (FM/AM) - four speakers, antenna - audio remote control on the steering wheel - Bluetooth, USB connection and hands-free system - MyFord Dock * Sliding door: sliding door, right * Rear mud flaps * Side protection strips * Power steering * Safety belts - seat belt pretensioners and force limiters in the front - warning system for unfastened driver's seat belt * Seats: seat package 4 - driver's seat, 4-way adjustable (fore/aft, backrest, seat cushion tilt, height) - double passenger seat with storage compartment under individually foldable seat cushions - headrests, height-adjustable - tray in the double passenger seat (foldable) - internal armrest for the driver - BASIC seat upholstery: fabric * Start-stop system * Daytime running lights * Partition to the cargo area without window * Rear bumper with integrated step * Lashing eyes * Immobilizer * Heat-insulating tinted glass * Central locking with remote control Lodpfjlvqh Tjx Apdsag * Auxiliary heater, electric ... and more ----The vehicle is in original condition! Nationwide delivery possible for an extra charge. Errors and prior sale excepted. We will gladly accept your vehicle as a trade-in. Financing / leasing also possible without a down payment! Do you have any further questions? We will be happy to advise you!

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 1407, total width: 2,500 mm, total length: 2,710 mm, total height: 3,000 mm, overall weight: 10,000 kg, maximum load weight: 330 kg, loading space volume: 3.3 m³, air pressure: 7 bar, Tonello 330 HS Industrial Garment Washing & Dyeing Machine (re-controlled 2014) Large-Capacity 3300 L Industrial Garment Wet-Processing Machine with B&R Touchscreen Control The Tonello 330 HS is a large-capacity industrial garment washing and wet-processing machine manufactured by Tonello S.r.l. (Sarcedo, Italy), the leading garment-finishing technology brand. The 330 class (3300 L drum) handles industrial washing, dyeing, softening, bleaching and stone-wash / enzyme effects on denim and garments at production scale. This unit (MASI in-house reference "Pesumasin No 3") was in professional denim-finishing production until factory shutdown. The machine body dates from 2000 and the complete electrical control system was rebuilt in 2014 with a new Tonello / B&R panel. Technical Specifications • Manufacturer: Tonello S.r.l. (Italy) • Model: G1 330 HS • Serial / Matricola: 1407 • Year: machine 2000 / electrical control rebuilt 2014 • Basket / Drum Volume: 3300 L • Power Supply: 380–400 V, 3-phase + GND, 50 Hz • Installed Power: 27 kW (machine plate) / 14 kW (2014 control plate) • Air Pressure: 7 bar · Max Steam Pressure: 3 bar · Hydraulic Pressure: 10 bar • Weight: 10,000 kg • Supply Cable: 25 mm² • Country of Manufacture: Italy Key Features • Large 3300 L stainless drum for high-capacity garment wet processing • B&R Power Panel 300 touchscreen HMI (rebuilt 2014) with programmable cycles • Yaskawa Varispeed 616G5 variable-frequency drum drive • Mettler Toledo weighing controller and Siemens Sitrans flow metering • Automatic chemical dosing system • Steam, water, air and hydraulic services • Front loading door with sight glass Includes • Tonello 330 HS washing machine with stainless drum • B&R touchscreen control cabinet and pushbutton console • Yaskawa VFD and PLC electrical cabinet • Chemical dosing system, pumps and instrumentation Laedpfxjzmt S Dj Apdsg Applications • Industrial denim and garment washing • Garment dyeing and over-dyeing • Softening, bleaching, enzyme and stone-wash effects • High-volume garment wet processing Condition • Working — main machine functional (per factory records) • Previously in professional denim-finishing production (MASI "Pesumasin No 3") • Machine from 2000 with 2014 electrical-control rebuild • Typical wear/dust from a wet-processing environment • Available for inspection under working conditions before dismantling Location Valga, Estonia Dismantling & Transport Buyer responsible for dismantling, loading, transportation, and all related costs. Professional rigging required (heavy industrial machine, ~10 t). Sales Terms Sold as-is, where-is, without warranty. Part of the MASI Jeans factory liquidation. Part of the Tonello industrial laundry line (available individually or as a complete line).

Condition: refurbished (used), functionality: fully functional, Year of construction: 2013, total length: 2,868 mm, total height: 2,102 mm, total width: 1,960 mm, overall weight: 2,200 kg, Hello, we are selling several 3D printers from an insolvency estate. All are professional-grade devices from the automotive development and design sector. This listing features the Stratasys Objet 1000 / J4100 from 2013. The printer underwent a mechanical overhaul by Stratasys in 2025 and was updated to the latest standards electronically and in terms of software. This upgrade cost approximately EUR 135,000. Accessories such as a replacement print bed with a mobile lifting frame and various spare parts are included. Consumables can be purchased additionally at a favorable price. This is a stereolithography printer, meaning liquid resin is cured using UV/laser technology, creating the component layer by layer with extremely high detail, precision, and excellent surface quality. Thus, it is an absolute professional-grade device that can, for example, print multi-colored automotive lights with a clear glass appearance. A new device in this print volume size currently costs well over EUR 350,000 (net). Technical data: Build volume/build size max: 1,000 × 800 × 500 mm Layer thickness up to 27 microns High speed: up to 3 base resins, 27 µm resolution Super high speed: 1 base resin, 55 µm resolution PolyJet UV technology 110–240 V Dimensions: 2,870 x 1,960 x 2,105 mm Weight: 2,200 kg The price is ex works; we can arrange loading. We also offer worldwide shipping and the necessary customs documents, for an additional fee. The device can be inspected at our warehouse. Price includes VAT; invoice with VAT shown separately. !! Sale only to business customers, without warranty, no guarantee, no exchange, sold as is. Further description from the manufacturer: Create large or small production tools and full-size prototypes. Maximize your productivity and achieve a quick ROI with the Stratasys J4100™ 3D printer. Its multi-material capability, high throughput, and extra-large build platform enable faster, smarter, and more precise workflows. Thanks to PolyJet Technology™, this powerful system enables engineers, manufacturers, and designers to 3D print any design – no matter how complex or detailed. The size of the parts is irrelevant: the J4100 prints both large and small prototypes with equal precision. Print large parts with a length of over a meter in a single print job. This eliminates the need to split large CAD files and later assemble the parts. Print many parts in a single print job and benefit from competitive unit costs. The reliable and user-friendly J4100 enables you to produce parts that are ready for use with minimal or no post-processing. The support material can be quickly removed with a water jet, and for most applications, the smooth, multi-material parts do not require polishing or painting. Lodpsz Ahq Tefx Apdeag

Condition: repair required (used), Year of construction: 2000, Hydraulic press for ceramic tiles SACMI PH380, the machine has incomplete control system. Lajdpfx Apsxvdnbedjg

Year of construction: 2019, condition: refurbished (used), functionality: fully functional, This is a CMP 61 combination steamer from the premium manufacturer Rational, in an electric version, manufactured in 2019 and equipped with a fully automatic self-cleaning system! The unit has been completely overhauled in our in-house workshop and is fully functional. The combination steamer shows signs of wear, see photos. The base frame shown in the picture is not included in the offer but can be purchased as an option. You will receive an invoice with VAT shown. Service: We will gladly assist you in finding a certified Rational customer service provider throughout Germany. Are you looking for a specific Rational appliance model? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. This unit is the optimal choice if you are looking for a classic combination steamer that you want to operate manually. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible choice of shipping or self-collection Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 The Combi Master® from RATIONAL is robust and impresses with its functions, which enable the highest food quality. It supports the individual craftsmanship of the chef through precisely controlled cooking chamber climate, as well as precise adjustment of temperature, humidity, airflow and cooking time. Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845 x 850 mm Power connection: 400 V / kW: 11.0 / 50-60 Hz Capacity: 5x1/1 GN Weight: approx. 103 kg Serial number: E61MI19122799286 Year of manufacture: 2019 Condition: used, overhauled, fully functional Further information: Possible applications: Steam mode: from 30° C to 130° C Hot air mode: from 30° C to 300° C Combination mode: from 30° C to 300° C Finishing®: brings pre-prepared and chilled dishes to the ideal serving temperature in an optimal environment Automatic separation of grease for clean cooking chamber air Fully automatic cleaning program 5 air speeds: Whether delicate or robust, the CombiMaster® Plus has the right air speed for every food Ventilated double-pane glass (swiveling for easier cleaning) Core temperature measurement using a sensor Cool-down function High-performance fresh steam generator (automatic rinsing and draining) Handheld spray with automatic retraction Dynamic air circulation Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to request advice or would you like to see something on site? You can reach us by phone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. Subject to changes and errors. Laodpfsz Dg Svjx Apdjg The sale is exclusively subject to our general terms and conditions.

Condition: used, Year of construction: 2017, Overview This SACMI KUBE 60 is a rotary self-adhesive labelling machine built in Italy in 2017. It carries six self-adhesive labelling stations and eighteen servo-driven bottle plates, and reaches a maximum output of 12,000 bottles per hour in its current configuration. The machine labels 750 ml glass bottles in a sparkling wine line, where it currently runs at about 5,000 bottles per hour. A LINX SL301 laser marking system is integrated for coding. Technical data - Manufacturer: SACMI - Model: KUBE 60 - Year of manufacture: 2017 - Machine type: rotary self-adhesive labeller - Maximum output: 12,000 bottles/h - Current production speed: about 5,000 bottles/h - Containers: glass bottles, 750 ml - Self-adhesive labelling stations: 6 - Bottle plates: 18, servo-driven - Electrical supply: 400 V, 3 phases + N + PE, 50 Hz Lsdpjz Durwjfx Apdeag - Rated current: 13 A Equipment - Six self-adhesive labelling stations with their own operator displays - Main touch-screen operator panel - LINX SL301 laser marking system for coding Condition The machine is still installed and in production and can be inspected by arrangement. Dismantling and loading are not included. Availability Available from 29 January 2027.

Condition: used, Year of construction: 2004, Overview Lasdpfx Ajz Dtndepdeg This Robino & Galandrino ZENITH Z 2/16 OTTICO is a rotary capsuling machine for sparkling wine bottles, built in 2004. It places and crimps capsules onto 750 ml glass bottles, with optical spotting so that a printed capsule is aligned to the bottle before crimping. The machine is laid out as a two-turret unit: a capsule distributor turret feeding a 16-head rotary crimping turret, rated at 12,000 bottles per hour. It is still installed and under power, remains in production until end of January 2027, and can be visited in operation on request. Technical data - Manufacturer: Robino & Galandrino - Model: ZENITH Z 2/16 OTTICO - Year of manufacture: 2004 - Machine type: rotary capsuling machine for sparkling wine bottles - Configuration: 2 turrets, 16 crimping heads - Capsule spotting: optical - Capacity: 12,000 bottles per hour - Container: glass, 750 ml sparkling wine bottles - CE marked Equipment - Automatic capsule magazine with inclined slat elevator feed - Optical spotting station for pre-printed capsules - Full safety enclosure with transparent doors and emergency stops - Bottle infeed and discharge handling with star wheels and guide rails Condition Used - still installed and under power, in production at the current site. Availability From end of January 2027. Location: France. Sold EXW; dismantling, handling and truck loading are not included.

Condition: new, mileage: 10 km, power: 125.03 kW (169.99 HP), first registration: 08/2026, fuel type: diesel, overall weight: 3,500 kg, tire condition: 100 %, color: white, gearing type: mechanical, number of seats: 3, loading space length: 4,200 mm, loading space width: 2,100 mm, loading space height: 2,100 mm, Equipment: ABS, EBS, air conditioning, airbag, cruise control, electronic stability program (ESP), non-smoking vehicle, power assisted steering, traction control, New Renault Master chassis, L3 2.0 170 hp + insulated body Standard equipment: • Option: socket on the B-pillar • Tire pressure monitoring system • Rain and light sensor • Steel underrun protection • “Wide View” interior mirror • Full-size spare wheel • Standard tires • Lane keeping assist • EMRD3 approval criterion • LED low beam and daytime running lights • RCall system • Rear parking sensors • Driver fatigue warning • Traffic sign recognition • Emergency braking assist • Driver airbag • Side marker lights • Central locking • ABS • Cruise control with speed limiter • Wireless smartphone charger • 10-inch “OpenR Link” multimedia system with wireless smartphone mirroring • Manually operated air conditioning • Electrically adjustable, heated, and manually folding exterior mirrors • Height-adjustable seatbelt • Folding key • Two-level adjustable plastic steering wheel • Interior mirror • Electrically operated front windows, including pulse function • Driver’s seat with armrest and lumbar support • 2-seater “Mobile Office” bench seat with storage compartment • Cabin lighting • 12V socket in the cabin • Extendable passenger-side storage compartment • Trim of the partition to the driver's cabin with carpeting • Lockable storage compartment in the dashboard • Analog driver displays with 3.5-inch TFT display (monochrome) ENGINE • Engine type: Blue dCi 170 • Displacement (cm³): 1998 • Number of cylinders: 4 • Number of valves: 16 • Maximum power kW (hp): 125 (170) • Maximum torque (Nm): 380 – 1500 • Fuel type: Diesel • Emission standard: EURO VIe Insulated body • Internal dimensions: 4.20 x 2.10 x 2.10 • Intermediate frame made of cold-formed steel profiles, hot-dip galvanized • Walls and roof of the body (40 mm thick, RTM process) consist of a 3-layer panel made of high-quality laminate, glass fiber reinforced using polyester resin, designed as sandwich panels with insulation. • Interior walls coated with reinforced AT laminate • Front wall and roof prepared for the installation of a selected refrigeration unit • Insulated floor, with an anti-slip layer • Aluminum exterior and interior corner profiles • Two-leaf rear door, opening 270°, with exterior locks • Side doors of the body • Door handles, fittings, locks, and the frame of the rear door made of stainless steel. • Plastic wheel arches, equipped with mud flaps. • One LED light • A set of cargo securing rails • Roof spoiler • 2 drain openings Net price for the complete vehicle: 43,900.00 EUR Optional equipment: ➢ Rear view camera: 350.00 EUR ➢ Carrier Citimax 350 L.A. refrigeration unit: 5,550.00 EUR (Power supply exclusively via the vehicle engine and heating with hot gas) Laodsz Dpnyjpfx Apdeg ➢ Carrier Xarios 300 refrigeration unit: 7,600.00 EUR (Power supply via the vehicle engine and the 220-V power grid) ➢ Carrier Xarios 350 unit: 8,800.00 EUR (Power supply via the vehicle engine and the 220-V power grid)

Condition: used, functionality: fully functional, mileage: 4,58,174 km, power: 338 kW (459.55 HP), first registration: 03/2023, fuel type: diesel, overall weight: 8,461 kg, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2023, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Predictive Cruise Control: I-See. Map based topography information. Cab: Globetrotter XL Cab, extra high sleeper. 2 x 210 Ah - AGM Absorbent Glass-fibre material type. Lajdozfyy Sopfx Apdog D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR. EURO 6. I-Shift Automated 12-speed - GCW 60 tonne. Standard transmission shift - I-Shift or Powertronic. Volvo Engine Brake - Retardation D13K-375kW/D16-500kW. Advanced Emergency Brake System AEBS Driver attention support Driver comfort Electrically controlled air conditioning with sun sensor. Comfortable, suspended driver seat with belt. Comfortable suspended Passenger seat with seatbelt mounted in seat. Height adjustable foldable top bunk 700 x 1900mm. Lower bunk 815mm wide in the centre. Cab parking heater - 1.8kW Air to air. 33 litre under bunk mounted fridge / freezer with dividers. Technical specifications Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with AEBS advanced emergency brake system. Front tyres - 315/70 R22.5. Rear tyres - 315/70 R22.5. Jost JSK 37 cast fixed or sliding fifth wheel. Wheelbase 3800 mm. 900 litre, left side fuel tank with steps. 65 litre AdBlue tank under/behind cab. 570 litre, right side fueltank. Speed limiter setting 90 km/h - 56mph. Technology Secondary colour information display. FMS gateway for Fleet Management System. Exterior LED Headlights. Automatic headlight switching between day running light and low beam. Front fog lights - white. Tyres Information Front left - 13 mm Front right - 13 mm Rear left inner - 15 mm Rear left outer - 14 mm Rear right inner - 14 mm Rear right outer - 14 mm

Condition: used, functionality: fully functional, mileage: 2,26,313 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 380 mm, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2024, number of cylinders: 6, cubic capacity: 12,777 cm³, steering wheel position: left, Equipment: full service history, power assisted steering, Features Cabin type: Globetrotter XL Volvo FH 460 Eco torque software - Improved economy mode. Fuel economy optimized cruise control for I-Save Volvo Engine Brake - Retardation D13K-375kW/D16-500kW I-shift Automated 12-speed - GCW 60 tonne NEW D13K460TC Turbo-compound diesel engine, 460hp, 2600Nm SCR and EGR Batteries: 2 x 210 Ah - AGM Absorbent Glass-fibre Material type Euro VI Step E Rear Camera - GSR Compliant fitted at end of frame Driver comfort Seats: regular Beds: regular I-ParkCool Advanced cab parking cooler with 150V DC electrical compressor Parking heater (Webasto): 1.8kW Air to air 33 litre under bunk mounted fridge / freezer with dividers Electrically controlled air conditioning with sun sensor Driver Alert Support Warning Side Collision Avoidance Support, passenger and driver side Laodpez Drhvjfx Apdog Interior sun visor - Driver & passenger side Technical specifications Wheelbase: 3800 mm Fifth wheel height: 150mm leg-height Front axle load: 7.5 tonne Retarder: NO ACC - Adaptive cruise control: YES I-See Predictive Cruise Control with lower operating settings - Map based topography information ADR: Without Drive Axle ratio: 2.31:1 Continental VDO 4.1 smart tachograph version 2 - legal demand from 21/08/2023 Forward collision warning with adaptive cruise control and AEBS advanced emergency brake system Fuel tanks capacity (left, right): 610 LITRE, RIGHT SIDE FUEL TANK, 610 LITRE, LEFT SIDE FUEL TANK Ad blue tank capacity: 65 litre under cab Additional roof lights: Without Tyres: 315/70R22.5 Technology Infotainment System GSM/GPRS/4G modem, LTE & WLAN Exterior Mirror cameras: no Automatic - LED headlights Roof lights: without Side Skirts: YES Roof air deflector Volvo. Cab Enh Exterior Trim Levels: Enhanced complete paint - Main Grille, handles, mirrors, bumper in cab colour Tyres Information Front left - 5 mm Front right - 5 mm Rear left inner - 5 mm Rear left outer - 5 mm Rear right inner - 5 mm Rear right outer - 5 mm

Condition: excellent (used), Year of construction: 2014, Tilting table with air cushion Maximum glass size: 6000 x 3300 mm In very good and clean condition Good working order, tested Ljdpjy Nagcjfx Apdoag As is Available immediately

Condition: used, mileage: 34,073 km, power: 353 kW (479.95 HP), first registration: 03/2025, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2027, brakes: retarder, color: black, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MAN TGS 18.480 LL SA, full air suspension, ADR compliant, 2-line tipping hydraulics First registration: March 2025 Mileage: 34,073 km Hazardous goods equipment according to ADR Type EXIII (EXII, FL, AT) Unladen weight: only 7,272 kg High-roof cab TM with 1 sleeper berth, cab air suspension, Premium driver's seat package, multi-function leather steering wheel, professional combined instrument panel 12.3 inches (the large one), water auxiliary heater/parking heater, Climatronic air conditioning, 220-volt connection, MAN sound system, MAN truck navigation, STABO CB radio, side window wind deflectors, LightFix roof lamp bar chrome with 2x triple LED spotlights, illuminated MAN lettering and illuminated lion, Air suspension front axle Air suspension rear axle VASC height adjustment Wheelbase 3,600 mm AGM batteries 210Ah Aluminum diesel tank 390 L Lajdpfxsz Dzbxe Apdeg Ad-Blue tank 60 L MAN TipMatic 12-speed 12.26 DD, gearbox function EfficientRoll, idle speed driving, Efficiency Plus, Performance and Manoeuvre (shunting mode) RETARDER + high-performance engine brake EVBec Lighting: full LED Tires: front axle 385/65 R 22.5 Rear axle 315/80 R 22.5 ALCOA aluminum rims Dura-Bright EVO high-gloss 2-line tipping hydraulics, switchable high-pressure/low-pressure system, pivoting arms in front of the fifth wheel Full safety package Light and Visibility Plus, full brake assistant, digital axle load display, light sensor, rain sensor, door window safety glass, electronically controlled steering system MAN ComfortSteering, driver airbag, ESP, ASR, distance cruise control with stop-and-go function, emergency brake assist EBA Plus, lane keeping assistant LRA, lane change assist LCS and turning assist, MAN AttentionGuard, traffic sign recognition, RENTING is the new BUYING; immediately available with our full-service rental.

Condition: used, mileage: 1,17,946 km, power: 350 kW (475.87 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 07/2027, brakes: retarder, color: white, gearing type: automatic, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, MERCEDES-BENZ Actros 5 L 1848 GigaSpace with SoloStar Concept First registration 06/2024, from first owner German delivery, German registration Mileage 117,946 km GigaSpace cab with flat floor, air-suspended cab, 2 beds, Style-Line, SoloStar Concept, multi-function leather steering wheel, interactive multimedia cockpit, sound system, Mercedes Truck Navigation, digital radio DAB+, light sensor, rain sensor, electric sliding/lifting sunroof (glass version), MIRROR-CAM, air horns, CB radio, auxiliary warm water heater, additional noise and heat insulation in the cab, electric stationary air conditioning system, waste heat recovery, full-LED lighting, cornering lights, illuminated Mercedes star, Engine OM471 Euro VI E, Lodjz Dzbfspfx Apdsag Torque increase in 7th - 11th gears and Torque increase in 12th gear Mercedes PowerShift 3 Advanced RETARDER Wheelbase 3,700 mm Tires Front axle 385/55 R 22.5 Rear axle 315/70 R 22.5 Aluminum tank on the left, 680 liters + 120 liters Ad-Blue Aerodynamic underbody fairing Full safety package with: Predictive Powertrain Control, lane keeping assist, distance control assist, attention assist, traffic sign assist, Active Brake Assist 5, Active Sideguard Assist, Active Drive Assist 2, driver airbag, trailer stability assist TSA, axle load measuring device With 2-circuit tipping hydraulics, switchable high-pressure/low-pressure system RENTING is the new BUYING; with us, it is also available immediately in the form of a full-service rental.

Condition: good (used), Year of construction: 2012, operating hours: 43,313 h, controller model: Siemens Sinumerik 840 D, laser power: 5,000 W, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 115 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Laser power: 5,000 watts Working area: 3,000 × 1,500 × 115 mm Max. sheet thickness, steel: 25 mm Max. sheet thickness, stainless steel: 20 mm Max. sheet thickness, aluminum: 20 mm Max. speed: 235 m/min Accuracy: 0.10 mm MACHINE DETAILS Control model: Siemens Sinumerik 840 D Operating hours: 66,934 h / 43,313 h Dimensions & weight Dimensions (L x W x H): 8,300 x 4,800 x 2,400 mm Weight: 12,000 kg EQUIPMENT Solid-state laser TruDisk 3001 with one LLK output Light guide cable according to standard layout Ledpfxjz D Evae Apdeag Laser cooling unit (water-air) Excitation via pump diodes Laser power control Laser logbook function Universal cutting head with fully adaptive lens system Protective glass against lens contamination Condition monitoring of the protective glass ControlLine: Height control and sheet edge detection