Used Vertical Glass Washing Machine for sale (86,040)

Condition: used, functionality: fully functional, Year of construction: 2014, 1600 mm open top vertical glass wasching+ drying machine glass thiknss : 3 - 19 mm inlet conveyor : 2 m outlet conveyor : 2 m total lenght : 6 m Knedpfx Afswwivpe Sed total power : 9 Kw Machine fully fonctional in very good condtion

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Vertical glass washing machine LISEC VHW-33/V8 Year of production: 2012 Maximum glass height: 3300 mm Working direction: from right to left 8 brushes Very good and clean condition Good working order, tested As is Available immediately Knjdpfsw U S Axox Af Sed

Condition: used, Year of construction: 2019, functionality: fully functional, total width: 800 mm, total height: 2,100 mm, total length: 1,130 mm, Vertical glass washing machine with a washing height of 1000 mm. This washing machine is designed for integration into the outfeed conveyor of glass edging machines with vertical transport. It is equipped with two washing brushes: the rear brush is fixed in position, while the front brush can be adjusted in width manually using a handwheel, allowing the cleaning of different glass thicknesses. The wash water is blown off the glass panes (front and back) using air nozzles and then collected in a reservoir. The machine can be operated either with fresh water or via a separate water tank. It is currently set up for operation with fresh water. Water tank and pump are not included in the price. Knsdpfjxqmxxex Af Ssd Modifications to the outfeed conveyor of the glass edging machine may be required for installation. Assembly can be carried out by us upon request but is not included in the scope of delivery. The pictures show an identical washing machine already installed at other customers—such as in a Bottero 810 BCS or a Bodo Gerhard K300. The washing machine offered here is in used but good condition. It has been thoroughly inspected, cleaned, and fitted with new wear parts by us.

Year of construction: 2000, condition: excellent (used), vertical flat glass washing machine type 1600 VA working height : 1600 mm open top working direction : from left to right number of brushes : 6 glass thikness : 3 - 12 mm inlet conveyor : 2 m outlet conveyor : 2,75 m with TL lights automatic speed adjustment Knjdpowmbuvsfx Af Sjd wasching section + rinsing section + drying section 1 watertank with heating element + 2 water tanks cold water total lenght : 7,1 m

Condition: excellent (used), Year of construction: 2016, MBR RADOVANOVIC WSR-27 Maximum glass height: 2700 mm Working direction: from left to right (L-R) PLEASE NOTE Machine excluding inlet and outlet conveyors Very good and clean condition Good working order Kedpfsq Ih Nyox Af Ssnd Available immediately

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, CE Glass 2100mm vertical glass washing and drying machine. The machine is in a well-maintained and inspected condition, ready for immediate use. New water suction rubber, new bearings. Working direction: from right to left Ksdjxb N Rfjpfx Af Send Max glass height: 2100mm Number of brushes: 4 (also for Low-e glass) Drying fan Stainless steel cabinet Water heating Background lighting Stop sensor The machine is fully inspected, cleaned and in perfect working order and can be viewed on our premises!

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. Kedpfx Asr Ak Exef Sjnd The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Year of construction: 2025, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2025/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it Kjdpfjgq Dl Ajx Af Ssnd ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: used, Year of construction: 2011, Serial no. 30-2587-01, control, manufacturer Siemens, infeed roller conveyor, output section, length approx. 4,000 mm Ksdew Rywpjpfx Af Sjnd +++ Attention: Position is part of an online auction! +++

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Zaffeani 1300mm vertical glass washer and dryer. Working direction: Left-Right Max washable glass height: 1300mm, open top, glass can be rotated Washable glass thickness: 3-12mm Number of brushes: 4 (not for Low-e glass!) Drying fan Kjdpev Nqgzefx Af Ssnd Stainless steel cabin Backlighting Stop sensor The machine has been completely inspected, cleaned and can be viewed in perfect working condition at our location!

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical glass washing machine 1600 mm open top working direction from right to left number of brushes : 4 glass thikness : 3 - 19 mm total lenght : 700 cm Knedpfx Afoxyhnte Ssd

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Hydro 3000.6 Max. Glas-height: 3.000 mm Thickness: 3-22 mm Knodpfxjwd N Uro Af Ssd Prewashingzone / Mainwashingzone / drying zone Stainless steel body 6 brushes (150 mm) maid out of one piece with Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm • Machine width – 2300 mm • Price upon request Knedpfx Afswl Dkqe Sed

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 4,440 mm, total width: 1,487 mm, total height: 2,793 mm, input voltage: 400 V, overall weight: 1,900 kg, input current: 16 A, Equipment: documentation/manual, EXPOGLASS® PRIAM is a modern vertical glass drilling machine equipped with electronic feed, automatic drill length measurement, and glass thickness measurement. The machine ensures high precision, smooth operation, and clean edges even with large hole diameters. Polish product – a solid, easy-to-use construction designed for intensive daily work in glass workshops. Technical data Length - 4440 mm Height - 2793 mm Width - 1487 mm Weight - 1900 kg Kedpfx Afeh Ek H Ss Sjnd Maximum distance of drilling center to bottom of the glass - 1000 mm Glass thickness - 2 to 20 mm Communication - touchscreen 7” and analogue buttons Spindle feed (motion) - automatic Spindle feed steering - electronic (not pneumatic) Setting of loading bar height - electronic Spindle rotation speed - 700 RPM do 2800 RPM Measurement of the drill position - automatic Drills changing mode - lowering of the white top and blocking spindle rotation Setting of the drilling depth - electronic (calculated by a controller) Horizontal positioning - two row of bumpers with measure (manual) Glass clamping system - pneumatical Hole chamfering mode - installed, electronically driven Automatic glass thickness - installed, electronically Measuring Automatic drill bit diameter - installed, electronically Measuring Drilling in series - installed

Condition: used, Year of construction: 2023, Serial no. 30-3677, wash line, length approx. 3,000 mm, corona treatment system, manufacturer Tantec, type SheetTEC, serial no. 46120, power generator, type HV-X series, serial no. 11958, 2 belt conveyors LxW 1,500–2,000 x 700 mm, extraction system, control and switch cabinets, PLC control, Simatic HMI Touch display, universal power meter UMG103-CBM, deionized water treatment system, accessory units. Kjdjwzuxwopfx Af Ssnd +++ Attention: Item is part of an online auction! +++

Condition: good (used), Year of construction: 1994, The machine was restocked a year ago and fitted with new brushes. The washing brushes are in very good condition! 8 brushes, Knsdpfoqc Udiox Af Ssd Without inlet and outlet, With control cabinet and dryer fan, Working direction: from right to left, 2.3 m washing height, Glass thickness: 4-15 mm, Width: 2900 mm, depth: 1100 mm, height: 3400 mm.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, input frequency: 50 Hz, input voltage: 400 V, pressure: 6 bar, LiSEC, KSR-25, Right – Left, year 2010 Vertical Glass Edge Seaming Machine, h=2,50 m Vertical compact grinding machine for the seaming of glass sheets on all four sides in a fully automatic cycle. Inspection during production is possible by appointment. Kedpfx Afjv Eguyo Ssnd In very good working condition. Available: March / April 2025.

Condition: as good as new (ex-display), Year of construction: 2025, Schiavo Top 2000.4 Max. Glas-height: 2.000 mm Thickness: 3-19 mm Prewashingzone / Mainwashingzone / drying zone Stainless steel body 4 brushes (120 mm) maid out of one piece with Kedpfx Afswd Raij Ssnd Incl. water tanks incl. vacuum system for drying zone LED lights on the outled for inspection

Condition: ready for operation (used), Year of construction: 2008, • Glass thickness (mm): up to 30 • Glass height (mm): up to 2000 Kedexgtqgopfx Af Sond • Cleaning brushes: 4 front and 4 rear

Year of construction: 2012, condition: ready for operation (used), A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documentation available. On-site inspection is possible. Knedpfxjxcx A Tj Af Sod

Year of construction: 2003, condition: used, Ser.-No. 300424, comprised of: Glass panel size approx. 700 x 500 x 800 mm, H 1,800 mm, thickness 1.2 to 6.0 mm, maximum panel size 2,700 x 1,800 mm, thickness 2.0 to 8.0 mm, side conveyor roller track, roller spacing approx. 220 mm, transport speed 1.5 to 6 m/min. Infeed/Park Position 1, L approx. 2,850 mm, pre-wash zone with rinsing, brush unit, intermediate drying, soaking spray zones, 2nd wash zone soak area, 3rd intermediate drying (2 units), 1/4 wash zones 1 to 4, final cleaning/rinsing zone / park position 4, rinsing zone length approx. 3,000 mm, fully enclosed with removable panels, wash water storage tanks (tank 1, tank 2), wash water storage tanks (tank 3 to tank 8), dimensions: machine installation length approx. 25 m, outfeed approx. 6,000 mm, total height approx. 2,950 mm, compressed air approx. 6 bar, waste water return from tank 8 to on-site water treatment system, electrical installation. Knodjwzu Ekepfx Af Ssd +++ Attention: This item is part of an online auction! +++

Condition: good (used), Year of construction: 2007, System with 6 washing brushes (very good condition). With inlet and outlet transport section, fan for dry zone, water circulation and heating tank. Working direction: From left to right. Washing machine height: 3650 mm. Washing machine width: 2800 mm. Inlet width: 1600 mm. Outlet width: 1600 mm. Condition: Good, second-hand. Kedexq Rc Ijpfx Af Send

Condition: used, Year of construction: 2008, functionality: fully functional, Stefiglass Sprint 1600 1600mm vertical glass washing and drying machine. Working direction: right to left Max washable glass height: 1600mm Number of brushes: 4 (not for Low-e glass!) Drying fan Ksdpjwk Up Usfx Af Ssnd Stainless steel cabin Water heating Backlighting Stop sensor The machine is in used condition as shown in the pictures, it can be viewed at our location!

Condition: good (used), - Completely overhauled by us, ready for immediate use - Type: 100013 - Serial number: 011136 - Glass thickness 2-12 mm - Minimum glass dimensions 120 x 80 mm - Max. Washing width: 1000 mm - Dimension: L=2900mm W=1650mm H=1250mm - Roller spacing 55mm -3 pairs of brushes / 1 pair of racks - Connected loads: 380/50V, 13kW - Price on request Knjdpfxjr Nvldo Af Sjd

Condition: like new (used), Year of construction: 2004, Fully refurbished. BENTELER Grinding, Milling, and Washing Line is a comprehensive glass processing system designed to handle large glass sheets up to 3300 x 6000 mm. This integrated line combines grinding, drilling, milling, and washing operations to streamline production and enhance efficiency. By linking these processes, the system minimizes manual handling and reduces cycle times, ensuring precise and high-quality glass processing. Knodpou Su Ncsfx Af Ssd Photos show before/after refurbishing. Like new condition