Used Glass Scale for sale (5,370)

Condition: new, Year of construction: 2026, functionality: fully functional, number of drawers: 30, SLIDING RACK FOR GLASS M80-30 MANUFACTURED IN 2026/ BRAND NEW We manufacture sliding racks for glass pane storage (boxes with glass) or other panel materials (metal sheets, quartz sinters, polycarbonates, furniture boards). We design and manufacture our racks from scratch in Poland. The materials which we use for manufacturing hold the proper certificates of durability and they are subject to quality control on a continuous basis. Storage racks consist of sliding and slightly inclined drawers. They save up to 75% of space because all the partitions are parallel and they are separated every 10 millimetres. We also offer various sizes and load-bearing capacities. However, after consultations, we are able to manufacture a storage rack of different parameters, considering your individual conditions and requirements. The inclination of spans depends on assembly – it may be right hand sided or left hand sided. We recommend this storage rack especially to glass production facilities, stoneworks facilities, furniture production facilities and advertising companies, which want to use their space effectively. The racks are delivered for self-assembly in a package. The assembly is very simple and easy owing to our long-term experience which allowed us to create a well-thought product which is attached with the assembly instructions, making the assembly trouble-free. In case of any problems, do not hesitate to contact our technical department. We also provide charged assembly services by our technicians in your location. M80-30 RACK TECHNICAL DATA Hodpfx Aoha E S Tjbhep Intended use – single glass panes 255 cm x 160 cm Maximum pane size - 275 cm x 170 cm Number of partitions -30 The width of the storage strip for glass – 8 cm The length of the storage strip for glass - 308 cm The material on which glass is placed – wooden board 308 cm x 8 cm x 2.5 cm Structure height (A) – 218 cm Structure width (B)- 436 cm Structure depth (C)-318 cm Space needed for the correct use of the rack – 27 m2 Requirements for the ground – smooth/straight The number of the partition guide bearings – 8 pcs. Front wheel – Ø 160 / reinforced polyamide Rear wheel – steel wheel with a bearing / rolled along the profile Colour - RAL 7040 (grey) Anti-corrosion protection – phosphating and powder-coating of steel elements Permissible load-bearing capacity of a single partition – 900 kg Permissible load-bearing capacity of the whole rack – 27000 kg Partitions inclination – left or right – depending on assembly Assembly time - 14 hours The number of people required for assembly – 2 people DOCUMENTS ATTACHED TO M80-30 RACK - User’s Manual - Assembly Instructions - Rating plate - 12 months’ warranty The product is delivered as a whole ready for use. We also deliver our racks for glass to the EU countries and other countries.

Condition: good (used), - Type: GS - 250 Hjdpfxorgqp Ne Abhep - serial no.: 14 - Year of construction: 1999 - Dimension min.: L1100mm x W800mm x H900mm - max.: L1700mm x W1300mm x H900mm - Power type: 1 x 220V / 50HZ / 7.8 A - Connected load: 1500w / 2800 MIN - 1 kW - Price on request

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,600 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 950 kg, input current: 16 A, warranty duration: 12 months, input voltage: 400 V, GLASS CUTTING TABLE – MANUAL – BRAND NEW Model: SDRXL FULL Year of manufacture: 2026 – brand new Manufacturer: EXPOGLASS® (Poland) – for over 11 years we have been supplying glass cutting tables to workshops on 3 continents. Our background in flat glass processing has allowed us to design equipment with exceptional durability and functionality. Standard equipment: Manually extendable supports for vertical loading (with replaceable ash wood blocks), 4 swivel polyamide wheels Ø80 mm for heavy loads, 4 adjustable leveling feet, Worktop covered with highly durable black felt + ash wood edge strips, Two steel plates mounted underneath for easy unloading with a forklift, Lower beam filled with reinforced vibrated concrete for maximum stability, Pneumatic tilting with hydraulic speed controller, Longitudinal and cross breaking bars, pneumatically operated by foot pedals, Air cushion with integrated 2.2 kW high-pressure fan for easy handling of heavy glass sheets, Adjustable breaking bar height. Technical data: Weight: 950 kg Table size: 340 × 260 cm Height: 91 cm (adjustable ±2 cm) Power supply: 400 V, 50 Hz, 16 A plug (5 pin) Hjdpfjf Svtkox Abhjp Air connection: 7 bar, standard 7.2 NW fitting Documents & warranty: Declaration of conformity with EU Machinery Directive, CE marking, EU EMC declaration, Warranty: 12 months, Operating manual (Polish & English). Condition: brand new, ready for immediate use. Delivery: we organize worldwide transport (EU and beyond).

Condition: good (used), Year of construction: 2009, Cutting width: 3700 mm. With glass loading and unloading device. Cutting system: heating and blade. Working height: 950 mm. Total length of the system: 4080 mm. Table width: 4020 mm. Width across the bridge: 4820 mm. Year of manufacture: 2009 Hjdsxpnk Hjpfx Abhep Weight: approx. 6.2 t. Condition: good, second-hand

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total length: 43,000 mm, total width: 4,000 mm, total height: 2,750 mm, working height: 500 mm, input voltage: 400 V, type of input current: three-phase, Lisec insulating glass line 4500 x 2000 mm, year 1989/2007, consisting of following machines: - AKL-20V, edge grinding machine - RTVN-27/20WE, washing machine inlet conveyor - RTL-20B, washing machine with 6 brushes for low-e, including a sand filter and a hot water tank as well as a blower - RSV-38/20, frame set section - PSL-35/20V, assembling station - RTVN-16/20MZU2, measuring section for gas filling press - FPS-35/20U2B, gas filling press for Argon, can do assembling of 4,5 m long units, gas filling up to 3500 mm length - RTVN-11/20, outlet conveyor of gas filling press - UKL-35/23VA, tilt table for line discharge of 90° - KFL-35/22, horizontal glass conveyor - RTVN-16/20VFE, short inlet of sealing robot, including measuring device for glass and frame - VL-1N/20, sealing robot, including option for triple units - DOS-1PU, dosing and metering station, modified to PS Hedeza Hckspfx Abhep - VLA-25/20, extension of sealing robot The machine is in very good condition and will be available by the end of June 2026.

Year of construction: 1999, condition: ready for operation (used), functionality: fully functional, Schraml Modula 16 Super 6, manufactured in 1999. Vertical flat glass washing and drying machine, washing height 1600 mm, 6 brushes, open top. Glass thickness 3-12 mm, working height 550 mm, working direction from right to left, inlet section 2800 mm, Hedpfxezcxa To Abhjp outlet section 2800 mm, light panels at the inlet and outlet, automatic start-stop system, recirculation system with water tank and water pumps. The machine is in good condition and is available immediately.

Condition: excellent (used), Year of construction: 2015, CNC glass milling and working centre NEPTUN QUICKMILL 160-30 NC Year of production: 2015 Milling, seaming of milled profiles and drilling (only with frontal head) Maximum working height: 1600 mm Maximum working length: 3000 mm Minimum glass size: 800 x 340 mm Glass thickness: 5 - 12 mm NC controlled (with software) Excellent condition Good working order, still in production As is Hedperzazyofx Abhsp Available immediately

Condition: excellent (used), functionality: fully functional, Glass packages unloader (grab) UNKNOWN producer UNKNOWN year of production For jumbo size glass sheets (6000 x 3210 mm) Maximum lifting capacity: 3000 kg Very good condition Hedpfx Asx Ecrdebhop As is Available immediately Cheap

Condition: used, mileage: 33,709 km, power: 125 kW (169.95 HP), first registration: 10/2024, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel tank capacity: 93 l, color: black, gearing type: automatic, number of gears: 9, emission class: euro6, number of seats: 3, total length: 6,950 mm, total width: 2,100 mm, total height: 2,770 mm, Year of construction: 2024, Equipment: ABS, air conditioning, airbag, cruise control, hill-start assist, navigation system, parking heater, power mirror, start-stop system, traction control, trailer coupling, = Additional options and accessories = - LED headlights - Armrest - Attention assist - Automatic headlight flash - Outside temperature gauge - Heated exterior mirrors - Passenger airbag - Electrically foldable exterior mirrors - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Speed limiter - Cruise control - Height-adjustable steering wheel - Air conditioning - Collision mitigation by braking - Comfort seats - Lumbar support - Metallic paint - Multifunctional steering wheel - Emergency brake assist (BA3) - Radio with DAB - Rain sensor - Rearview camera - Headlight assist - Lane keeping assist - Immobilizer - Tachograph - Thermal glass - Blind spot monitoring - Traffic sign recognition - Connected services - WiFi hotspot Hjdszcnidopfx Abhjp = Additional information = General information Number of doors: 2 Model range: Apr. 2024 - 2026 Cab: single Technical information Torque: 400 Nm Number of cylinders: 4 Engine displacement: 1,950 cc Dimensions Length/Height: L3H1 Weights Unladen weight: 2,035 kg Payload: 1,465 kg GVWR: 3,500 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Interior Interior: black Consumption Average fuel consumption: 9.1 l/100km Maintenance, history and condition APK (periodic vehicle inspection): valid until 10/2027 Number of keys: 2 (2 remote controls) Product safety Manufacturer: Oostland Automobielen Wasaweg 22 9723JD GRONINGEN, NL

Condition: good (used), - Year of manufacture 12/77 Hsdpfxsr Nvgne Abhjp - Serial number: 3241 - Belt size 100 x 1830 mm - Dimensions 1650 x 1200 x 100 mm (HxWxD) Price on request

Condition: used, Year of construction: 1998, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 6778 2-01E, Used single-head glass grinding machine. Hedpfxjx Rp Sqe Abhjp

Condition: used, Year of construction: 2006, functionality: fully functional, Fully renovated, repainted drilling machine. Guides, bearings, compressed air pipes has been fully changed. Hsdpfoxz Ez Hex Abhjp

Condition: like new (used), Year of construction: 2020, Avery Berkel XTs420 UK 3054 2 Gigabyte system memory Standard max. 8 GB Optional Solid state storage up to 5 USB 2. 0 ports Touchscreen 13. 3 inch 2 available !!!! Unit price Shipping possible Hjdpfx Abel Rahtohep

Year of construction: 2026, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2026/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position Hjdpfxegq Dl Ao Abhjp ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 1,860 mm, total length: 2,800 mm, total height: 910 mm, overall weight: 600 kg, input current: 16 A, warranty duration: 12 months, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, GLASS CUTTING TABLE - MANUAL - New MODEL: SDRM FULL Manufacturing year 2026 - brand new We manufacture glass cutting tables in various equipment configurations. Our products are characteristic for top functionality and service life because we processed flat glass and we know what customers expect from these machines. Our tables have been operating for a few years in glass processing plants on 3 continents. Hedpfxsd Tamds Abhjp Our long-term experience enables us to design a machine whose functionality and quality satisfies the needs of our customers to the fullest extent. TABLE EQUIPMENT: - manually slid supports for vertical loading (covered with replaceable ash trees blocks) - 4 swivelling polyamide castors Ø80 for extreme loads of table movement - 4 adjustable feet for levelling the table in the operation place - table top surface - extremely resistant black felt - table top surface circumference covered with milled ash tree strips - 2 steel panels screwed beneath facilitating loading by means of a forklift - bottom base beam filled with vibrated concrete with steel reinforcement and dispersed concrete from polypropylene fibres in order to increase the stability and rigidity of the structure - pneumatic pivoting (the vertical and horizontal levelling of the table top surface) by means of an actuator with a hydraulic speed controller - breaking strips (breakers: longitudinal and transversal) controlled pneumatically by means of pedals mounted on the sliding foot panel with automatic return - an airbag with installed high pressure fan enabling the easy manipulation of heavy panes on the top surface (the fan is activated by means of a pedal on the foot panel and two additional switches mounted on the top surface circuit blow in the air under the panes, reducing friction significantly) - adjustable height of breaking strips sliding from the table top surface. BASIC TECHNICAL DATA: - weight: 600 kg - top surface size: 286 cm x 186 cm - height: 91 cm (adjustable +/- 2 cm) - electrical connection: 16 A 5 pin plug - air connection: standard 7.2 NW - air working pressure: 7 bar - fan power: 2.2 kW - voltage: 400 V 50 Hz DOCUMENTS ATTACHED TO THE MACHINE: - Declaration of Conformity with the applicable machinery standards - CE Marking - UE EMC Declaration - 12 months’ warranty - User’s Manual (in Polish and in English) This product is supplied ready for operation. Our company can also deliver the table within the EU and to other countries.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2022KL2938, total width: 2,400 mm, total length: 3,400 mm, total height: 910 mm, overall weight: 900 kg, warranty duration: 12 months, • Glass cutting table SDRD FULL Tilted table which supports the process of manual cutting the glass, product designed and manufactured in Poland Length - 3400 mm Width - 2400 mm Height - 910 mm Breaking bar - 2 pieces in cross arrangement Hedpfx Absh Nx R Tjhep Bars steering - by foot pedals Air cushion system - installed Power of fans (air cushion) - 2,2 kW Air cushion system steering - by foot pedals and hand button Tilting of the top - pneumatical Stabilization of tilting - by hydraulic speed controller Support of quick tilting - by to gas springs Pull-out cantilevers of glass loading - yes, manually Covering of the top - grey felt Covering of the circumference - ash slats Wheels - 4 rotary, with increased load Levelling feet - 4 pieces installed Steel construction covering - polyurethane covering Filling of the lower beam in stationary construction - vibrated, fibre reinforced concrete Table available from stock. Our company also delivers worldwide.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: GG220N-15839, overall weight: 4,950 kg, input current: 92 A, input voltage: 400 V, year of last overhaul: 2025, For sale: double edge machine with 2 x 10 cup wheels and corner deburring function. This is a single machine with a maximum working width of 2500 mm. The machine is still connected and can be tested at any time. Hjdsxzgrtjpfx Abhop

Condition: reconditioned (used), MAREL + SCANVAEGT VÅGAR Hsdpfxegfvbqe Abhop ID.NO. 1654 2x complete Multihead scales from Marel / Scanvaegt's associated platform, 14 bowls, conveyor belts, vibrator gutters, platform, distribution tools for packing in deep drawers, previously packed salami but suitable for many other things such as Vegetables, Cheese, Fish and more.

Condition: refurbished (used), NIMO-KG SKV 200 MK Hjdshua Hdjpfx Abhjp ID.NO. 2196 Nimo-KG SKV 200 MK trolley lift for 200 liter trolleys. Dimensions 110 x 130 cm Height 480 cm Tipping height 380 cm.

Year of construction: 2000, condition: excellent (used), Bilwinco BM114-W multihead scale model year 2001. 14 bowls measuring / bowl 19 x 16 cm. Weighs between 30 - 2000 gr per weighing. Hsdpfx Aeifpf Eebhep Dimensions 130 x 130 cm H 120 cm.

Year of construction: 2002, condition: refurbished (used), NIMO-KG ID.NO. 1767 Nimo-KG in very good condition built-in mettler Toledo scale cells space for 4x sideboards + 1 sideboard in the middle. Completely in stainless steel hydraulic pistons. Hodpfxefigxte Abhep

Condition: good (used), - Type: FP 6 glass grinding machine with 6 spindles - Serial number: 22 - Year of construction: 2002 - Glass thickness: 2 - 25 mm - Min. glass dimension: 80 x 200 mm - Machine dimensions: 5200 x 1200 x 2800 mm - Weight: 1500 kg - 2 diamond wheels for edge - 2 polishing wheels for edge - 1 combined wheel each for front and rear seam - Connected loads: 380V, 50Hz, 8.8 kW Hsdpeq Dzpvofx Abhjp - Offer price 4.500 € free truck loaded

Condition: used, Year of construction: 2008, Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | - Hjdpfx Abjvzymhshop

Year of construction: 2025, condition: new, functionality: fully functional, overall weight: 675 kg, lifting height: 3,800 mm, lifting power: 350 kg/m, Equipment: CE marking, === MAIN SPECIFICATIONS === Model: Smartgroup SG350 Year: 2025 (Demo machine) Operating condition: Demo / as-new Lifting capacity: 350 kg Maximum lifting height: 3,800 mm Own weight: 675 kg Traction: 1WD rear-wheel drive Speed: 5 km/h Dimensions (L × W × H): 1.80 × 0.75 × 1.85 m Batteries: 4 × 105 Ah AGM Charger: Integrated onboard charger Overload warning system: Yes Proportional controls: Yes Pick & Carry capability: 350 kg Hjdpfsxwm Rujx Abhep Turning radius (lateral): 2.1 m CE certification: Yes === HIGHLIGHTS === • Demo machine from 2025 – excellent condition • Compact, lightweight and highly manoeuvrable (only 675 kg) • Strong pick & carry performance with 350 kg capacity • AGM battery pack with integrated charger – plug & play operation • Proportional control system for smooth and precise movements • Overload warning system for improved safety • Ideal for glazing, construction, installation, warehouse and industrial use • CE-certified and ready for immediate operation === CONDITION === Demo condition – used only for demonstrations. Fully inspected and tested by certified technicians. No damage, no faults, 100% functional. === LOCATION & DELIVERY === Located in Sittard, The Netherlands. Worldwide delivery available. Price: €22,250 excl. VAT (EXW Sittard). === DELIVERY === • Crane loading available on request • Worldwide transport arranged by Collé Rental & Sales • All shipments handled professionally with full CE documentation

Condition: used, Year of construction: 2020, Monoblock for rinsing, filling and capping glass bottles. 1. Rinser: Rinsing tower with 6 grippers for single-stage rinsing of empty bottles. 2. Filler: Filling tower with 6 electro-pneumatic backpressure valves. 3. Capping machine: Stainless steel cap container with cap conveyor and capping head 4. Bottle exterior washer Additional title: Counterpressure filler with 6 filling valves, sealer with one sealing head Capacity: 1100 bo/h referring to 0,33 l bottles Filling temperature: 2 °C Length: 2,20 m Width: 1,90 m Hodpjw Tbgdsfx Abhop Height: 2,10 m Formats: Euro 0.5 l and 0.33 l; 26 mm crown caps Running direction: clockwise Operation / Control: Schneider Electric Base construction: Monobloc; Stainless steel housing on feet with plexiglass doors Features: Rinser with 6 grippers, filler with 6 filling valves, capper with one capping head, bottle exterior washer, beer pump, free bottle transport