Used Grain Drain for sale (1,460)

Condition: used, Year of construction: 2021, 8 rows Shifting tramline Fertilizer coulters Fertilizer auger Isobus machine Without / Terminal Area: 1,011 ha / Dodpfx Astgpf Ujptjkt

Year of construction: 2006, operating hours: 1 h, condition: excellent (used), Putzmeister DMR 13 stationary pump. Fully refurbished and renewed. New Pistons. Many new parts. Like new. Ready for work. Dksdpfxjytch Ns Aptot The Putzmeister DMR 13 is a reliable stationary concrete pump with the following specifications: Mixing container 170 l Conveying hopper 200 l Output* 20–80 l/min Conveying distance: to 150 m wide, to 80 m high. With plaster/fine plaster site-made mixes: 60 m wide and 40 m high Maximum grain size 6 mm Delivery pressure 40 bar Engine: diesel engine We accept barter.

Year of construction: 2023, condition: used, functionality: limited functionality, GÜNTHER - SPLITTER TWIN WAVE The Günther SPLITTER Twin Wave is a screening/separation machine designed for materials that are difficult to screen, especially coarse, wet, sticky, or contaminated substances. It is used to separate material based on grain size and to remove unwanted components such as stones, clay, mixed waste, or unshredded material. Djdpfjy N Rlvsx Aptjkt The machine is particularly suited for construction material recycling and processing, especially for mixed construction waste, excavated soil, as well as stones and earth. The twin-wave design keeps the material longer on the screening deck, helping to better dislodge adhering or clay-heavy components.

Condition: excellent (used), Year of construction: 2021, operating hours: 2,500 h, functionality: fully functional, overall weight: 1,100 kg, rotor diameter: 700 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 3,400 rpm, power: 90 kW (122.37 HP), Equipment: rotational speed infinitely variable, This shredding machine is exceptional and highly innovative. The material to be processed is shredded particle by particle in 6 rows of small chambers, while simultaneously the particles are flung against the grinding surface. The combined effect results in a very fine grain size – and it is possible to dry the material being shredded at the same time. Keywords: Turbo mill, impact mill, eddy current mill. Depending on the material, the machine can shred to a particle size of less than 1000 µm to 5 µm. The throughput rate is between 100 and 900 kg/h, depending on the material. The applications range from minerals, industrial products, powder coatings, chemicals, dyes to food and feed. Dkodpjzl Shzjfx Aptjt The innovations of the machine are: • the plug-in connections for the wear tools (always in the same place with minimal tolerances) • rotation in both directions – this ensures that the tools are worn down evenly on both sides • conical design – allows the cutting gap to be adjusted precisely to 0.1 mm with only 12 screws. Technical data: • Drive power 90 kW – frequency converter (FU) is essential – frame size 90 kW with 150% overload for 60 seconds. • Speed up to 125 m/s • Tools: Rotor and stator made of hard metal, available in various degrees of hardness; ceramics are also possible. • Machine monitoring via bearing temperature measurement and vibration measurement included. • Control panel is not included. The machine was in operation at an R&D center in Israel. Since the company now operates a production facility in Europe, the R&D center is being closed. The machines will be transported to Europe at the owner's expense and can be delivered EXW at a port or at the production plant in Europe.

Condition: new, The Grain Pusher is designed for use with loaders and telehandlers with quick release brackets available to suit your machine. Dkodpfen Tmxaex Aptjt

Year of construction: 2008, condition: used, functionality: fully functional, Blažek ABM-5 D stick packaging line for sale – 3 machines available For sale are three fully functional Blažek ABM-5 D stick packaging lines, including downstream collection stations. These systems were specifically developed for the precise filling of fine-grained sugar and feature volumetric dosing for granules and crystalline raw materials. Thanks to their robust design and reliable technology, the machines are also suitable for numerous other free-flowing products with comparable properties. Technical specifications: Manufacturer: Blažek Type: ABM-5 D Dosing system: Volumetric dosing Suitable for: Fine-grained sugar Granules Crystalline raw materials Current configuration: 5 sticks per cycle Includes downstream collection station Machines are fully functional Available systems: Year of manufacture 2008 Year of manufacture 2008 Year of manufacture 2016 Condition Dkedpjzvww Njfx Aptet All systems are in functional condition. A demonstration in test operation on-site is possible by arrangement, so that interested parties can be convinced of the function and performance of the machine. Inspection An inspection of the systems is possible by appointment. We will gladly provide further technical information, pictures, or a test run video. If you are interested, we look forward to hearing from you.

Condition: excellent (used), The silo has been dismantled. Complete with suction motors and pipes. Membranes, control system. Flour silo made of steel/stainless steel. Capacity: 6.5 tons of flour. One silo for 3.5 tons. And one for 3 tons. Dodpfx Asgh A Sgjptjkt We also have 3 x 25-ton Treviera silos, in excellent condition, complete with motors and pipes. These can be dismantled by the buyer. Please contact us in advance!

Year of construction: 2019, condition: defective spare-parts repository (used), functionality: not functional, Important note regarding the item's condition: Please read carefully before purchasing: This item comes from a business closure or warehouse liquidation. We were unable to test the device for functionality, and therefore it is explicitly sold as UNTESTED, DEFECTIVE, and NON-FUNCTIONAL. It is intended solely for hobbyists, technicians for repair purposes, or as a source of spare parts. The sale is made with the exclusion of any warranty regarding functionality or completeness. Product description: Offered is an industrial climate testing chamber / temperature and humidity testing chamber from the manufacturer SHENGS (Shanghai Shengs Electronic Technology Co., Ltd.). Devices of this type are generally used for material tests, aging simulations, or electronic component tests under defined temperature and humidity conditions. Features & visual characteristics (according to the images): • Interior: High-quality stainless steel interior, easy to clean. Includes a solid, perforated insert (grid). • Connections & access: Side cable entry (port) with a plug for passing through sensors or power cables for the test item. • Technical area: Easily accessible technical compartment on the side (electronics, contactors, relays, fan motors, and a stainless steel water tank for the humidification unit are installed). • Mobility: The heavy device is mounted on four stable swivel casters and can therefore be easily positioned at the place of use. • Other: Manometer on the outside, drain/supply hose in the lower area. Technical data (according to the nameplate): • Manufacturer: Shanghai Shengs Electronic Technology Co., Ltd. • Model: STH-2P-C (handwritten) • Year of manufacture / Date: 14.08.2019 • Serial number: SS-SC19011 • Power supply: 1 phase, 220V AC • Current consumption: 30A Visual condition: The device shows signs of wear and tear due to age and use (scratches, slight dirt, discoloration). A side panel for the technical area seems to be missing or was removed for the photos (please check the pictures carefully). The seals on the interior appear to be intact. All internal components shown in the pictures (circuit boards, cables, water tank) are included in the scope of delivery, but no guarantee is given regarding their functionality or completeness. Scope of delivery: • 1x SHENGS STH-2P-C climate testing chamber (as shown in the photos) • 1x Grid (already installed in the interior) • No other accessories, no manuals, or test reports are included. Dkedpfjzcxbwex Aptjt Shipping and pickup information: Due to its size and weight, regular parcel shipping is not possible. • Pickup: Pickup by the buyer is preferred (Please bring a suitable transport vehicle and possibly helpers/pallet truck). • Shipping via freight forwarder: Can be arranged on request and at the buyer's expense (buyer arranges shipping or freight costs are charged separately).

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Dedpfx Aeyb Rpdsptskt The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: used, empty load weight: 6,640 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 03/2001, suspension: air, tire size: 385/65 R22.5, trailer brake: trailer braked, Year of construction: 2001, Equipment: ABS, BENALU – approx. 55 m³ – Full Aluminum ((3 units in stock)) - Volume: approx. 55 m³ - Portal doors and grain discharge chute - Aluminum chassis - Aluminum body - ABS - BPW axles - Lift axle - Drum brakes - Air suspension - Roll tarp - Standing platform on the front wall Djdpoztk Ntsfx Aptjkt - Aluminum rims - Tool box - Spare wheel holder - Tire size: 385/65 R22.5 Tread depth approx. 50-80% - etc. ….. For more information: Mobile phone: +43 664 4477030 ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you. What to do with your used vehicle? If we reach an agreement, we will gladly accept it as a trade-in. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: used, maximum load weight: 24,300 kg, overall weight: 32,000 kg, axle configuration: 3 axles, first registration: 07/2014, loading space length: 11,600 mm, loading space width: 2,450 mm, loading space height: 17,003 mm, Year of construction: 2014, Equipment: ABS, Well-maintained tipping semi-trailer for scrap transport, Wytwornia Zabudow Poland Equipment: Chassis frame made of aluminium Dksdpfjzckarsx Aptot BPW axles Crank support legs Electric tarpaulin with remote control Grain discharge slide LED reversing lights Warning sign Platform on the front wall Tyre condition approx. 60% For equipment-related inquiries, please call. Subject to errors and prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, Drain screw system in any length, diameter, etc, tailored to your needs and requirements of course also available separately. Dedpfot Iwt Uox Aptskt reactions or questions ? please with full name, company name and phone number.

Condition: used, empty load weight: 6,560 kg, overall weight: 33,000 kg, axle configuration: 3 axles, first registration: 03/2000, loading space volume: 55 m³, suspension: air, tire size: 385/65 R22.5, Year of construction: 2000, Equipment: ABS, BENALU – approx. 55 m³ – Full Aluminum ((3 units in stock)) - Volume: approx. 55 m³ - Portal doors and grain slide - Aluminum chassis - Aluminum body - ABS - BPW axles - Lift axle - Drum brakes - Air suspension - Roll cover - Standing platform on the front wall - Aluminum rims - Tool box - Spare wheel holder - Tire size: 385/65 R22.5 Tread depth approx. 70-90% - etc. ….. For more information: Dkedpfx Apszr Skcotet Mobile: +43 664 4477030 ..:: Please contact us before your visit; the office is not always staffed ::.. Would you like to visit us? We offer a free pick-up service from the train station in 4020 Linz. We will take care of all customs matters for you. What to do with your used vehicle? If we come to an agreement, we will gladly take it in trade. This offer is non-binding and subject to change. Errors and prior sale excepted.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, overall weight: 1,600 kg, Electropneumatically controlled, segmented pressure shoes with a 30 mm segment width ensure a consistent grinding pressure across the entire workpiece width and can be further adjusted via the touch panel control. For final finishing: Smartflex lamellar disc for cross-grain sanding and for grinding radii. Technical data: Working width: max. 230 mm Workpiece thickness: 10 to 230 mm Year of manufacture: 2025 Weight: 1,600 kg 400 V, 50 Hz, 32 A, fuse rating 35 A Dkodezxnatjpfx Aptjt Directly from the manufacturer, inspection and sample processing possible at any time. Ex works Homberg-Caßdorf, price net plus VAT.

Condition: used, machine/vehicle number: 321, mileage: 9,07,800 km, power: 382 kW (519.37 HP), first registration: 01/2015, fuel type: diesel, empty load weight: 11,648 kg, maximum load weight: 14,352 kg, overall weight: 26,000 kg, tire size: 385/65 r22,5 - 315/80 r22,5, wheelbase: 3,900 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, loading space volume: 17 m³, loading space length: 5,700 mm, loading space width: 2,430 mm, loading space height: 1,200 mm, Equipment: ABS, additional headlights, air conditioning, cruise control, differential lock, hydraulics, low noise, navigation system, parking heater, retarder, traction control, trailer coupling, EBS Engine capacity 16,353 cc Light alloy rims Auxiliary air conditioning Urea tank (AdBlue) Automatic air conditioning Kempf aluminum bridge with plastic floor oculi Roll-up tarpaulin Grain pusher Folding underride guard Sun visor 2 loungers Cool box Air-suspended cab Alcoa aluminum rims Dedpfxom Dvhbj Aptskt Air horns Euro 6 A Errors excepted

Year of construction: 2018, condition: used, Screw compressor Manufacturer: Renner Type: RS132D Year of manufacture: 2018 Technical data - Main drive motor: direct drive of the compressor stages via a shaft coupling - Oil filter / thermostat unit: regulates the cooling of the compressor oil and filters it - Oil-injected compressor stage: compressed air generation - Suction regulator: regulates the amount of air drawn in by the compressor - Control cabinet: controls and regulates the compressor system - Suction air filter: filters the air drawn in - Radial fans: generate cooling air for the oil and compressed air coolers - Compressed air outlet: connection point for an external compressed air network - Minimum pressure retaining valve: maintains a minimum system pressure for oil supply, separates network / system pressure - Fine oil separator with oil suction line, sight glasses, and check valve: oil separation via air-oil filter cartridges, return of separated oil from the compressed air - Safety valve: relieves pressure in case of overpressure - Oil filler plug with oil level monitoring: electronic oil level monitoring - Oil drain: drains the oil reservoir - Compressed air / oil combined cooler: cools the compressed air and the compressor oil - Control system: RENNERtronic - Integrated standby heater Compressor - Counterclockwise rotation (without gearbox) / Clockwise rotation (with gearbox) Suction regulator The suction regulator is mounted directly on the screw compressor. It regulates the volume flow of air drawn in by the screw compressor through the suction filter. Operating principle of the suction regulator: The suction regulator has only one main valve. This valve operates Dedpfx Ajzu Aibeptekt as a stepless control valve as well as a tightly closing shut-off valve. In full-load operation, the suction cross-section is fully open with minimal pressure drop. In part-load operation, the suction cross-section is automatically regulated by limiting the stroke and adjusted to the actual air requirement. When the system is stopped, this valve quickly and automatically closes the entire suction cross-section completely. The multiple functions of the regulator are initiated by only one control unit. Minimum pressure retaining valve The minimum pressure valve is located at the compressed air inlet of the air aftercooler. It performs two functions: 1) As a pressure retaining valve, it prevents the pressure from dropping below a minimum overpressure of 4.5 bar when there is no back pressure. This pressure is necessary to ensure the oil supply to the compressor. At the same time, this minimum overpressure is required for good oil separation. 2) As a check valve, it prevents the backflow of compressed air from the compressed air network or the pressure vessel into the compressor system. This allows the separator vessel to be completely relieved when the system is shut down. The valve operates automatically. Adjustment of the minimum pressure valve may only be carried out by personnel authorized by the manufacturer! Suction air filter The suction air filter is installed in the housing and connected to the suction regulator via a ventilation hose. The micro-dry filter with a fineness of 10 μm is used to filter the suction air. The filter can be cleaned several times before it needs to be replaced. Use only original replacement filters! Pressure transmitter The pressure transmitter, used in all systems with electronic control (RENNERtronic / -Plus), is connected to the compressed air outlet (network press

Condition: used, mileage: 60,048 km, power: 294 kW (399.73 HP), first registration: 05/2010, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 06/2026, color: orange, gearing type: mechanical, emission class: euro5, Year of construction: 2010, Equipment: ABS, * Special equipment: * Wiedemann & Reichhardt BASIC 1000 Type 11.5-360 Vario superstructure, suction and jetting vehicle, former municipal service vehicle. * 3.0 m³ water / 8.0 m³ sludge, piston in front position * Vessel tube, lid, and base made of stainless steel * Stainless steel baffle plate mounted on sludge tank * Combination unit with telescopic piston, suction hose reel, high-pressure hose reel mounted on a boom with electronic pressure and speed control and display readout * ARCON radio remote control * High-pressure pump: Uraca Type P3-45-60 (Plunger 60 mm, 346 l/min, 205 bar drive power 130 kW, drive speed 1500 rpm), 3,421 operating hours * Vacuum pump: Wiedemann KW 2000 (2000 m³/h) with 4,395 operating hours (liquid ring pump) * Liquid ring pump - power consumption 50 kW, speed 1300 rpm * Liquid ring pump coupled with a pre-charge pump for temperature-dependent water circulation * Suction and high-pressure boom (swivel reel with 2 high-pressure hose reels, which can be operated individually, simultaneously, or synchronously) * Centrally mounted boom for optimal working range on both sides * - hydraulically swivels approx. 180° * - hydraulically telescopes approx. 1,200 mm * Hydraulic cable winch mounted on boom, lifting capacity 250 kg * Suction hose 25 m DN 125 * High-pressure hose reel 200 m DN 25 * Small high-pressure hose reel 80 m DN 13 * Length counter for high-pressure hose * Manhole above tank DN 500 * Hydraulic tilting tank approx. 1 m for maintenance and repair work * Hydraulic oil tank with 80 L capacity * 5 sight glasses on tank lid * Water filling on both sides with level indicator * BEKA-MAX centralized lubrication system for superstructure only, pump type troni X1, runtime 1.5 min or 20 cycles, pause time 4h * Accessories (various nozzles, suction hose DN 125, hose guides, spare parts (cardan shaft, valves, hoses)) * Handwash basin in the right front equipment cabinet, 20 L capacity, with swivel tap and fill unit * Boxes right and left at the rear, approx. 50 L, for storage of return pulleys, nozzles, etc. * Work floodlight (spotlight for shaft illumination), mounted on the boom, with 15 m cable and cable reel * Various work spotlights mounted on both sides of the superstructure * Rotating beacon on the boom and driver’s cab * Holder for manhole hooks at the rear incl. 2 hooks * 2 spring-tension cable reels * Large equipment cabinets mounted to the right and left of the water tank (illuminated), approx. 50 cm deep, aluminum doors opening upwards, gas struts with top locking * Wardrobe positioned over the high-pressure pump with lighting, ventilation slots, and water drain at the bottom * Extendable vice with bracket to the right * Rockinger SK 5 towing coupling * Front axle load 9.5 t * Raised exhaust pipe on right * Exterior mirrors electrically adjustable and heated * Wide-angle mirror with electric maneuvering assistance * Kerb mirror on the right, adjustable and heated Dodpfxjxvfxhe Aptskt * Rear axle differential lock * Air horns on driver's cab roof (2) * Cab: with 2 rear wall windows, tinted * Cab: with air suspension * Flame start system * Toggle brake (EVBec controlled) * Middle seat * PTO NMV 221, i=0.98 n=1470 rpm * Cab socket 12V and 24V * Control module for external data exchange * Additional high/low beam and fog lamps with cornering light * Further equipment: * Reversing camera * Turning camera * Axle configuration: 6x2/4 * Steered trailing axle * Wheelbase 3,600 mm + 1,350 mm * Frame over...

Condition: used, Year of construction: 2014, 30 liter SectionControl ISOBUS disc coulter ienung Nordsten / front tank NS1904M, Ba filling auger, 1900l / Dodet Uz Ivspfx Aptokt

Condition: used, maximum load weight: 29,700 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2008, loading space length: 7,300 mm, loading space width: 2,440 mm, loading space height: 1,350 mm, loading space volume: 24 m³, total width: 2,550 mm, total height: 3,329 mm, Year of construction: 2008, Equipment: ABS, 3-axle Schmitz Cargobull SKI 24SL 7.2 ALU box tipper VIN: 1239914 Chassis / Components: * Air suspension / Raise and lower function * Lift axle on axles 1 and 2 * Automatic lowering during tipping * Tires: 385/65 R.22,5 * Tire tread depth: Front ~40/90%, Middle ~40/90%, Rear ~40 * Foldable underrun protection * Steel chassis (fine-grain steel) Body: * ALU box tipper * CRAMARO E-roll cover * Remote control * Front cylinder Georg, high-pressure 250 bar * Volume: approx. 24 m³ Dodpfozbfplox Aptokt * Roll tarp * Work platform with access on the left * Rear gate, internal, with 2 hook locks * Aluminum floor, with 7mm aluminum wear plate, approx. 3,450 mm Weights: * Gross vehicle weight 35,000 kg * Payload 29,700 kg * Unladen weight 5,300 kg Other: * German registration * 1 previous owner New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates. We can also arrange the transport of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl am Rhein. Thanks to our many years of experience in the refurbishment and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. As we care about customer satisfaction, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them in the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly help you organize special transports. Day license plates / Export license plates We will gladly help you obtain export license plates/short-term license plates. Processing of customs formalities We will gladly help you with customs matters.

Condition: reconditioned (used), Year of construction: 2012, operating hours: 693 h, functionality: fully functional, working width: 650 mm, area performance: 4,200 m²/h, overall weight: 706 kg, warranty duration: 12 months, water tank capacity: 116 l, HAKO HAKOMATIC B115 R TB650 SCRUBBER NEW 6V 250Ah GEL BATTERIES (SIAP) (4x) NEW NEOS 24V 30A CHARGER Manufactured in 2012 with 693 hours of operation 650mm cleaning head (TB650) equipped with two new medium-hard disc brushes for work on any surface. New polyurethane squeegee rubbers, resistant to contact with oil, grease, and petroleum products. New rubber guards around the brush head prevent water from splashing outside the machine's outline. The device is equipped with a new, durable drain hose and a new suction hose. A new suction turbine ensures high water suction power from the squeegee. Each device we offer has individually taken photos; you buy exactly what you see. TECHNICAL DATA: Power supply voltage: 24 V Brush working width (mm): 650 Suction width (mm): 860 Theoretical capacity (m²/h): 4200 Clean/dirty water tank capacity (l): 116/116 Number of brushes (pcs): 2 Brush speed (rpm): 210 Total weight, ready to use (kg): 706 Gradeability (%): 10 INCLUDED: NEW 6V 250Ah SIAP GEL BATTERIES (x4) NEW NEOS 24V 30A BATTERY CHARGER NEW 24V 600W suction turbine NEW 330mm PPL 0.5 disc brushes (x2) Dkodpfx Aoztp Unsptet NEW drain hose NEW suction hose NEW head guard rubbers (x2) Squeegee blade with new rubbers 5L Tenzi Normal fluid - FREE KEY FEATURES: The 116-liter tank allows for a large volume of cleaning solution, eliminating the need to frequently stop for refills. The machine's design makes it highly maneuverable. The small turning radius allows for operation even in narrow passages and alleys. The parabolic squeegee beam ensures precise suction of the solution from the cleaned surface. The ergonomically designed cockpit and centrally located operator's seat provide excellent visibility of the surface being cleaned. The large working width (650 mm) ensures high surface coverage. The control panel is very clear and intuitive to use.

Condition: used, empty load weight: 6,160 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 09/2020, loading space length: 9,000 mm, loading space width: 2,340 mm, loading space height: 2,100 mm, loading space volume: 44 m³, tire size: 385/65 R22,5, wheelbase: 1,310 mm, Equipment: ABS, Color: MB 7350 novagrau (grey) Disc brakes EBS (Electronic Braking System) Payload: 32,840 kg Air suspension with lifting function Floor: 7 mm Rear wall: oscillating and designed as a single-leaf door SAF axles Underrun protection: foldable Lifting and lowering system Grain conveyor Platform Roll-up tarpaulin Splash-proof Hydraulic locking mechanism Subject to errors and omissions. Dksdpfx Apezzcphstet

Condition: excellent (used), 431 USED device for sprinkling grains, coating rolls in grains, has water spraying, and plates for various grains. EXTERNAL DIMENSIONS (in cm): -L: 200, -W:70, -H:130. The price is a net price. Dksdpshukixofx Aptst Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN AND UKRAINIAN.

Condition: like new (used), functionality: fully functional, machine/vehicle number: VF3VFEHS7N7040671, mileage: 1,72,000 km, first registration: 11/2022, fuel type: diesel, tire size: 215/65 R16C 106/104T, wheelbase: 3,275 mm, fuel: diesel, energy efficiency: D, color: white, gearing type: automatic, emission class: euro6, number of seats: 3, total length: 5,310 mm, total width: 2,010 mm, total height: 2,110 mm, loading space volume: 4 m³, loading space length: 2,400 mm, loading space width: 1,360 mm, loading space height: 1,150 mm, Year of construction: 2022, Equipment: ABS, AdBlue, Bluetooth, USB port, air conditioning, airbag, central locking, electric window regulation, fog lights, full service history, non-smoking vehicle, sliding door, soot filter, tire pressure monitoring, VEHICLE IN EXCELLENT CONDITION, AVAILABLE FOR TEST DRIVE Euro 6 D-Temp Automatic transmission Automatic climate control Bluetooth radio with MP3 player and steering wheel controls Smartphone integration Rear parking sensors Fog lights Dodpfxey A Ezre Aptskt Driver's airbag 3 seats in the cab Cruise control ATP FRCX Refrigeration from -20°C to +12°C Fridge unit mains/road – hot/cold with 220V socket Floor and perimetral skirting covered in rice grain aluminium Prepared for possible dual temperature operation

Condition: excellent (used), SELO Linear Scalder – Stainless Steel SELO industrial linear scalder, designed for the continuous thermal treatment of food products through scalding, especially suitable for fruit and vegetable processing lines. The equipment allows the product to undergo a controlled thermal treatment for a specific period before subsequent operations such as cooling, IQF freezing, preservation, or packaging. Scalding is commonly used to inactivate enzymes, condition the product, and stabilize its characteristics before the next stages of the process. Dkjdpfszxwvdex Aptjt Its linear configuration, continuous conveying system, and predominantly stainless steel construction allow for integration into high-production industrial lines. MAIN FEATURES -Manufacturer: SELO -Type: Industrial linear scalder -Application: Thermal treatment of food products -Automatic and continuous process -Internal product conveying system -Controlled dwell time -Uniform thermal treatment -Continuous feeding and discharge -Circulation/distribution system for the heating medium -Predominantly stainless steel construction -Longitudinal process chamber -Robust industrial structure -Top access for inspection and maintenance -Designed for continuous industrial operation -Integrable into automatic processing lines PROCESS The product is continuously fed into the SELO scalder and transported through the thermal treatment zone. During its passage, it is subjected to controlled temperature and residence time conditions, allowing for uniform scalding before discharge. Once the treatment is complete, the product can be directly transferred to a rapid cooling stage, avoiding unnecessary prolongation of the thermal effect and preparing it for subsequent processes. It can be integrated with: Product washers Slicers and dicers Conveyors and elevators Feeding systems Linear coolers Draining systems IQF freezing tunnels Weighers and dosers Fillers and packaging machines APPLICATIONS Especially suitable for fruit and vegetable processors, frozen food manufacturers, canneries, and prepared food plants. Depending on the configuration and process conditions, it can be used for peas, green beans, carrots, potatoes, corn, broccoli, and other vegetable products that require a scalding treatment before processing or preservation. The combination of SELO technology, continuous linear operation, and industrial construction in stainless steel provides a robust solution for professional vegetable thermal treatment lines. Machine available for inspection. Additional technical information, dimensions, additional photographs, or videos can be provided upon request.

Condition: used, Year of construction: 2014, functionality: fully functional, pressure: 8 bar, temperature: 20 °C, type of input current: three-phase, input voltage: 400 V, overall weight: 1,250 kg, usable tank capacity: 90 l, rotational speed (max.): 758 rpm, Equipment: rotational speed infinitely variable, We are offering this used RESPECTA DB13A/20-30L mixing and stirring unit, year of manufacture 2014. Manufacturer: RESPECTA Model: DB13A/20-30L Year: 2014 Condition: used Machine type: Mixing and Stirring Unit Weight: 1,250 kg Voltage: 400 V Frequency: 50 Hz CE safety standards The machine is in perfect working condition. This machine can also be purchased together with other units for a complete production line. Technical Details - Mixing Unit: The mixing unit is designed for blending dry fillers with liquids. Maximum filler particle size: 2mm Mixture output rate: approx. 20 – 30 l/min Mixing tool: single-flight mixing screw, left-handed, equipped with wear-protection coating, robust cylinder design with high surface hardness Drive: 3-phase motor, 4 kW – 379 rpm, 400V / 50 Hz Dodpfjyxg Dgox Aptokt Speed range: adjustable from 0 to 758 rpm Screw overload protection: set at 80% of the rated current Quantity adjustment: potentiometer, stepless, without altering the mixing recipe Technical Details - Binder Premixer: Dynamic mixing of pure liquids without any solid content. Mixing performance: max. 5 l/min Mixing tool: single-flight mixing screw, left-handed System materials: stainless steel, Viton, PTFE Drive: three-phase motor, 0.55 kW, 2830 rpm, 230-400 V / 50 Hz Pressure monitoring: S-11 pressure transmitter, 0-4 bar G ½" Pressure display: control terminal at switch cabinet Technical Details - Filler Dosing System: Four dosing systems for volumetric dosing of free-flowing, non-bridging dry fillers. The dosing units are interchangeable with identical units and secured with quick-release clamps. All dosing units are equipped with level sensors. For fine fillers, a horizontal agitator is integrated in dosing unit 2 to prevent bridge formation as much as possible. Fillers with max. grain size 2mm Dosing rate: approx. 2 – 10 l/min Dosing tool: single-flight spiral, left-handed Dosing drive: geared motor, 0.75 kW – 91 rpm, 230-400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 182 rpm Quantity adjustment and display: control terminal at switch cabinet Storage vessel Capacity: approx. 90 l (4x) Technical Details - Resin Dosing System: Pump unit for volumetric dosing of pure liquids without admixtures of solid or reactive substances. Dosing rate: approx. 400 – 2000 ml/min Viscosity at 20°C: approx. 2,000 mPas Pump type: gear pump Pump pressure: max. permitted 8 bar Drive: three-phase geared motor, 0.37 kW – 291 rpm, 230–400 V / 50 Hz Speed control: frequency converter – 0.75 kW – 230 V / 50 Hz Speed range: adjustable from 0 to 582 rpm Quantity adjustment and display: control terminal at switch cabinet Dismantling and removal at buyer's own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please feel free to send us a message or give us a call.