Used Grain Mill for sale (762)

Year of construction: 2024, condition: new, The Agricracker AC200 is a milling machine for structure milling. Grains, beans & seeds are welknown applications. Ndjdjg Ugbrjpfx Ab Red Even as fet and wet products, which are better grindable then known milling machines. Capacity 0-8 ton / hour. Flyer at the bottom of this page. Milling trials are possible.

Condition: used, maximum load weight: 35,910 kg, overall weight: 41,000 kg, axle configuration: 3 axles, first registration: 02/2023, next inspection (TÜV): 02/2026, total width: 2,480 mm, Year of construction: 2023, Equipment: ABS, 3-axle KRONE multi-container chassis SDC27 eLTU4 First registered 02/2023, from 1 owner Central tube frame made of high-quality fine-grain steel, pneumatically extendable rear end Fifth wheel height 1,120 to 1,150 mm Container locking devices for the following containers: 1x 40 ft container with tunnel 2x 20 ft container 1x 20 ft container flush with the rear 1x 20 ft container in the center 1x 30 ft container flush with the rear Ndodpfxjwdki Rs Ab Red KRONE axles with large disc brakes, 430 mm 1st axle LIFT AXLE Lifting and lowering system with automatic ride height adjustment 6 tires 385/55 R 22.5 KNORR Trailer EBS with vehicle stabilization function RENT is the new BUYING, with We are also available for RENTAL or full-service LEASING immediately-----

Year of construction: 2024, condition: new, functionality: fully functional, Clamshell Bucket, Hydraulic Grab, Grain Bucket, Bucket Grapple, Clamshell Grapple, Capacity 2 m3 Gross Weight 1700 KG Ndedpfx Aopcdd Aeb Rsd Rotation 360 Degree 1 Year Warranty - Company Mikron Hidrolik

Condition: new, functionality: fully functional, Year of construction: 2025, Chain excavator WOODGRAIN GF-1500 max 12/15KM Nodevzqk Repfx Ab Rsdd EXCAVATION DIMENSIONS 600 X 100 MM The WOODGRAIN GF-1500 chain excavator is a professional machine designed for excavating for cables, pipes, irrigation, digging trenches for water installations or irrigation systems. Thanks to its precision, speed, dimensions, it will easily perform excavations near fences or other objects, in hard-to-reach places even with very hard ground! Only one person is required for operation. Machine Specification CE Certificate, DTR: YES Engine Capacity: 420cc Fuel: Petrol Efficiency: 60m/h Digging Width: 100mm Digging Depth: 150,300,450,600mm Teeth: 27 carbide teeth Chain Length: 2000mm Chain Speed(Max): 550m/min Tire: 145/7.0-6 Height: 1100mm Length: 2100mm Width: 720mm Gross Weight: 188 kg Engine technology: 4-stroke, Single cylinder, air-cooled, OHV (overhead valve) Displacement (cm3): 420 Cylinder: Cast iron sleeve Cylinder diameter (mm): 90.0 Stroke (mm): 66.0 max 3600 rpm Fuel tank capacity (l): 6.6 Oil system capacity (l): 1.1 Dry engine weight (kg): 31.0 Dimensions: length (mm): 499 Dimensions: width (mm): 370 Dimensions: height (mm): 443 Max engine power (EPS*): 15 HP *EFFECTIVE POWER SOLUTIONS Engine Features: OHV Technology - optimal performance guaranteeing longer engine life and greater fuel savings. Lo-Tone PRO Muffler - Lowest audible sound level (significantly lower DB) TWO air filters - no airborne contaminants into the engine (protection) Speed ​​control - regulates speed to provide more usable power in difficult conditions. Cast iron sleeve - reinforcement and durability, providing resistance to wear and overuse while improving oil control. Double ball bearings - provides additional durability and extends engine life. Float carburetor - the right amount of fuel, which improves engine start-up along with fuel economy High torque - more power, higher efficiency! Protective cover against ejection of excavation spoil

Condition: new, Year of construction: 2025, KRBS 101 Combined pipe, profile and belt grinder Convenient operation due to easily adjustable clamping device The rotatable clamping jaws of the clamping device allow safe clamping of square tubes, round tubes and flat steel Adjustable grinding angle from 30 - 90° and from 0° - 60°. Due to the optimised quick-change holder, the tensioning pulley can be changed easily and quickly without tools Particularly durable due to larger and improved roller bearings Practical tension pulley holders integrated in the substructure Extensive range of tension rollers for grinding different pipe diameters available as accessories Quick change between pipe grinding and belt grinding possible Powerful motor Almost all adjustments can be made without tools (operating tool included) Large, hinged protective screen with optimum field of vision 2 belt speeds for optimum adaptation to the respective material (15 m/s best for stainless steel and aluminium, 30 m/s perfectly suitable for steel) With two easily removable chip collecting containers Suction nozzle (Ø 100 mm) for suction systems available Suction units available as accessories Further developed, vibration reducing substructure Scope of delivery: 1 x standard sanding belt grain K 36 2 x spit collection container 1 x screw wrench 1 x sanding roller 42 mm Model KRBS 101 Nodocnz Ayjpfx Ab Rsdd Article no. 3921001 Technical data Mains connection 400 V Mains frequency 50 Hz Motor power 2.5 / 3.3 kW Sc

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Ndodpfx Abexxk Ake Rsd Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: new, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245/70 R 17,5, color: other, gearing type: other, front tire size: 245/70 R 17,5, rear tire size: 245/70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic tailgate opening when tipping backwards, side boards with spring relief, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the sides, infinitely height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode, front-mounted, integrated compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- subject to printing errors, mistakes and changes, sample images --, More data under: !, More Details: ! Ndedpfx Aoxv Dc Ejb Rjd

Condition: used, maximum load weight: 29,560 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 09/2026, loading space length: 11,560 mm, loading space width: 2,480 mm, loading space height: 2,445 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,900 mm, Year of construction: 2024, Equipment: ABS, H&W (Vreden) AGRAR Walking Floor 70 cbm Fully Equipped First Registration Internal Dimensions (LxWxH): 11,560 x 2,480 x 2,360/2,566 mm (conical design) Coupling height: 1,200 to 1,250 mm Total height: 3,900 mm SAF axles "Off-Road" with large 430 mm disc brakes WABCO trailer EBS with RSS stability program Chassis made of fine-grain steel, hot-dip galvanized Forced steering on 1st and 3rd axle, TRIDEC system with rod steering 3x central lubrication points mounted externally 6x 385/65 R 22.5 tires Cargo-Floor AGRAR floor with 15-board system, reinforced 10 mm version Remote control for floor and tailgate Ndsdpfxexgzt As Ab Rsd Wall panel seams on the inside fully welded (grain version) 2x reinforced cross members Stainless steel wear plate at the rear under the floorboards Front wall with cleaning door Double-wing rear door made of 30 mm aluminium hollow profiles Hydraulic connections at the front wall and additionally at the support legs PNEUMATIC BULKHEAD POSITIONER Roof roll tarp with quick tensioning system RENTING is the new BUYING. With us, ALSO available immediately in full-service rental.

Condition: excellent (used), Labotek Type: FMD-M-M-15-15-V Model 101134 The Labotek FMD-M-M-15-15-V model is part of the FMD-M series by Labotek, a leading manufacturer of material drying, dosing, and conveying systems for the plastics industry. The FMD-M series comprises modular dryers designed for processing plastic granules. Technical Specifications of the FMD-M Series Model designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Shipping volume: 1.15 m³ These dryers are specifically designed for processing plastic granules and are characterized by their modular construction, allowing flexible adaptation to a wide range of production requirements. Voltage: 3x400 Vac+PE Current: 10.4 Amp Overcurrent protection: 16 Amp Power: 2.6 kW Frequency: 50/60 Hz The Labotek AVR3G is an industrial vacuum conveyor with a 1-liter capacity, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical factors. Ndsdpewwh Evefx Ab Red Technical data for Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed material: Free-flowing, granular raw material (minimum grain size 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80°C Alarm function: Low material level Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See image) (Subject to change and errors in technical data. Details are provided without obligation!) If you have further questions, we are happy to assist you by phone.

Condition: new, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 9,720 mm, loading space width: 2,410 mm, loading space height: 2,200 mm, loading space volume: 52 m³, Equipment: ABS, Aluminium rear tipping trough approx. 52 cbm, aluminium chassis, combination rear door with double-wing doors and rotary latch / pendulum flap, pneumatic locking, 2 x grain slides, load pressure gauge, tarpaulin cover, aluminium landing legs, ABS, EBS, SAF INTRA CD axle(s), aluminium rims, disc brake system, air suspension with lifting/lowering device, lift axle; vehicle may be wrapped and/or lettered for advertising purposes. Our offer generally does not include a new roadworthiness inspection (TÜV). Should you require a new inspection, we will be happy to provide an offer from our partner workshops! Vehicle may be wrapped and/or lettered for advertising purposes. Our general terms and conditions of delivery and payment apply. We will gladly prepare a financing or leasing offer for this item. Please contact us! Ndjdpoxv Nyvsfx Ab Rjd

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives Ndedpfx Asmhh Idob Red - logspacer Location: Comes to stock 54634 Bitburg

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Ndedpfsxxky Aex Ab Rsd Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Year of construction: 2020, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Beveling and Packaging Machine – Packtech AF-35 A professional solution for fast and precise packaging of bulk products. The Packtech AF-35 is a pneumomechanical vertical machine designed for weighing, dosing, and packaging bulk products in “pillow” type bags. It is ideal for packaging pellets, grains, salt, sugar, feed, fertilizers, and other free-flowing materials — even in large doses up to 50 kg. Thanks to its weight-based dosing system, the machine guarantees high accuracy (error 0.5–1%) and a wide operational range from 2 to 25 kg per portion. The machine operates fully automatically, requiring minimal operator intervention. The machine can work with loading conveyors, allowing automatic maintenance of product level in the hopper. Its construction meets ISO 12100:2010 safety standards, and all product-contact parts are made of stainless steel. Ndsdpfxoxx Sdvs Ab Rjd Key Advantages of AF-35: - High efficiency – 1–5 cycles per minute depending on the product - Precise weight-based dosing for various bulk materials - Wide dosing range: 2–25 kg - Fully automatic operation with minimal supervision - Wide film compatibility through impulse sealing (PE, PP, laminates) - Robust construction – combination of carbon steel and stainless steel - Safety and compliance with ISO standards Technical Data: - Power supply: 400 V, 3.5 kW - Pneumatics: 6 bar, 500 l/min - Machine dimensions: 2900 × 1800 × 4600 mm - Weight: 960 kg - Film thickness: 20–130 μm - Max. roll width: 1050 mm Packaging dimensions: up to 600 mm length and 400 mm width Hopper capacity: 100 l Applications: - Food industry - Agriculture - Feed production - Chemical processing - Fertilizers and granulates - Pellets and solid fuels The price quoted is Net. Transport and installation at any location can be arranged for an additional fee. The machine is ready for operation. Immediate pickup available in Gdańsk.

Condition: used, maximum load weight: 32,150 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2025, next inspection (TÜV): 03/2026, loading space volume: 31 m³, total width: 2,550 mm, total height: 3,650 mm, Year of construction: 2025, Equipment: ABS, SEKA 3-Axle Food Tank Semi-Trailer, 3 Chambers, 31,000 Litres First registration: 03/2025, New vehicle Unladen weight: 5,850 kg Overall length: 10,650 mm Overall height: 3,650 mm Coupling height: 1,150 to 1,200 mm Chassis made of fine-grain steel, KTL primed + two-coat paint finish SAF axles with large disc brakes, 430 mm SAF Tire Pilot tyre pressure monitoring system 1st axle is a lift axle, incl. automatic starting aid WABCO Trailer EBS with RSS (Rollover Stability Support) Spring brake actuators on 2 axles SAF crank support legs Aluminium air tanks Tyres: 6x 385/65 R 22.5 2x LED reversing lights Stainless steel tool box, rear right Tank capacity: 31,000 litres, divided into 3 chambers (12,000 + 6,000 + 13,000 L) Tank material: Stainless steel 1.4301 Non-pressurised tank Polyurethane insulation (K=0.481 W/m²K) Bright-polished stainless steel cladding, without tensioning bands, end covers made of synthetic resin Each chamber with 1 x DN450 manhole cover, 4-point bolted Continuous stainless steel walkway Insulated DN100 common outlet ending in rear discharge box Central cleaning pipe with 6 individually lockable spray heads Stainless steel outlet box at rear Ndjdpfx Aow D Tluob Rjd Stainless steel hose carrier, left side, DN160, length 6,000 mm Reducers: DN100 to DN80 DN80 to DN65 DN65 to DN50 RENTING is the new BUYING – also available immediately from us with full-service rental!-----

Condition: excellent (used), Shimadzu Type: Prestige-21 / with AIM-8800 infrared microscope Shimadzu IR Prestige-21 infrared spectrophotometer The IRPrestige-21 is designed for both highly sensitive and broad applications in the areas of research and development. It is an excellent addition to the existing FTIR series, which covers the standard laboratory area, among other things. AIM-8800 specifications Optics: 15 x Cassegrain objective 15 x Cassegrain condenser mirror with inlet for flushing MCT detector: with liquid nitrogen monitoring system Wavelength range: Type 1 - 5000 - 720 cm -1 Type 2 - 5000 - 650 cm -1 Electrically activated aperture XY Θ directional drive. The setting of the XY direction increments is 1 µm above the sample surface and 1° steps in the Θ direction (numerical input possible). Minimum setting value: 3µm Motor-driven XY sample stage Positioning range: X-axis: 70 mm; Y-axis: 30mm Resolution: 1 µm pitch Sample thickness: Reflection mode - ≤ 40mm Transmission mode - ≤ 10mm Operation via the keyboard of the main unit Measurement mode selection / XY stage operation (4-step speed control) / manual focusing / illumination control (Optional) Control via PC Measurement mode selection / XY stage operation / automatic centering / manual focusing / automatic focusing / illumination control / Aperture setting / Aperture preview / Measurement position and aperture setting recording (10 sample positions, 2 background positions) Environmental conditions: Ambient temperature: 15°C ~ 30°C Humidity: 70% or less Njdpfx Aef I Ew Hob Rodd External dimensions, weight: W410mm x D540mm x H520mm x 36kg Condition: used / used Scope of delivery: (See picture) (Subject to changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, maximum load weight: 27,100 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2011, next inspection (TÜV): 02/2026, loading space length: 9,600 mm, loading space width: 2,340 mm, loading space height: 2,230 mm, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,850 mm, Equipment: ABS, Steel rear tipper body approx. 60 cbm, double-wing door with rotating rod lock at the rear, grain chute, roll tarp, Jost support legs, SAF INTRA axle(s), ABS, EBS, lift axle, air suspension with lift/lower device, vehicle may be stickered or lettered with advertising. Njdpfx Asw Nduveb Rjdd Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we are happy to provide a quote from our partner workshops! Vehicle may be stickered and/or lettered with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing option for this item. Please contact us!

Condition: new, Year of construction: 2025, Weima chipper / shredder WL 8 The WL 8 single-shaft shredder is a proven classic for shredding all types of wood waste. It is used, for example, thousands of times in wood-processing plants all over the world. The high quantity of these highly demanded shredders guarantees a proven and reliable technology at the best price-performance ratio. The machines are characterized by their very robust design, which ensures an extremely long service life (even outdoors). Ndsdpfjpdqzxsx Ab Rsd Intuitive operation thanks to Siemens PLC control with touch display. To ensure that the electronics are optimally matched to the machine, we design, build and wire our control cabinets ourselves. We only use high-quality components - for example from Siemens or Rittal. Intuitive touch interfaces guarantee quick adjustments. Functions such as setting the slider clock or stop ensure high throughput. The built-in overload protection also prevents defects in the machine. No material bridges due to free-cutting hopper design The hopper fulfills several tasks at once. First, the material to be shredded is fed through it - manually, mechanically, or by conveyor belt. The generous opening makes it easy to fill even very large parts. However, its special design, which is rounded at the front and thus effectively prevents material bridges, is decisive for shredding. Even with bulky parts, the shredder cuts itself free. If required, both hopper extensions and lids with gas pressure springs are available. Durable rotor bearings thanks to offset design A rotor bearing must be particularly robustly built due to the extreme stresses it is subjected to during shredding operation. To prevent dust or foreign matter from getting inside it, we have set it apart from the machine frame. This also makes it very maintenance-friendly and easy to access. Rotor diameter (mm): 260 Rotor length (mm): 1000 Rotor speed (rpm): 80 - 125 Power (kW) 22 Number of knives: 54 Available knife sizes (mm): 40 x 40 Grain size (mm): Suction port (mm): 200 Feed opening (mm): 1000 x 1250 length (mm): 2045 width (mm): 1740 height (mm): 1840 Weight (approx. kg): 2200 Accessories: - 2nd row of knives - logspacer Location: Ex stock 54634 Bitburg - immediately available -

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Ndodpfoxxkvkex Ab Rod Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, mileage: 90,000 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, first registration: 10/2022, next inspection (TÜV): 10/2027, emission class: euro6, color: white, number of seats: 5, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, second-hand vehicle warranty, soot filter, Optional extras: Driving Assistant system, vehicle without model lettering, metallic paint, tire repair kit (Mobility Pack), heated front seats, sun protection glass (tinted rear) Additional equipment: Storage package, deactivatable passenger side airbag, driver/passenger side airbag, Connected Professional equipment package, exterior equipment: Shadow Line high-gloss, electric exterior mirrors. adjustable and heated, exterior mirrors in body color, BMW Live Cockpit Plus, on-board computer, brake assist, DAB tuner (digital radio reception), high-gloss Shadow Line roof rails, anti-theft protection for wheels (rim locks), through-loading facility (rear center armrest), dynamic brake light, Dynamic Stability Control (DSC) with extended scope, Dynamic Traction Control (DTC), first aid kit / first aid kit, driving assistance system: Active Guard Plus (lane keeping assistant, front collision warning), driving assistance system: attention assistant, driving assistance system: driving experience switch, remote tailgate release, velour floor mats, front footwell lighting, luggage compartment partition (net), luggage compartment lighting, automatic tailgate operation, LED rear lights, interior: interior trim strips in matt grained quartz silver, body: 5-door, 3-zone automatic climate control with automatic. Air recirculation control, rear head airbag system, front head airbag system, folding rear headrests, multifunction steering wheel (sport/leather), alloy wheels, 140 kW mild hybrid (2.0 liter engine - 140 kW diesel), facelift, front and rear Park Distance Control (PDC), electric parking brake, tire pressure monitoring system, low emissions according to Euro 6d emissions standard, LED headlights, rear side airbag, front side airbag, seat cover/upholstery: Hevelius fabric, mirror package, start/stop system (function), warning triangle, widescreen display, tinted heat-insulating glass August 9, 2024 73,049 km* Rear brake pads * Standard service Ndodpfxoxqi Ebo Ab Rsd * Oil filter * Other brakes * Rear brake discs * Oil change * Microfilter * Fuel filter New price ¤ 51,008 net

Condition: used, maximum load weight: 35,000 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 04/2026, loading space length: 12,213 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 70 m³, total width: 2,550 mm, total height: 3,856 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle AGRICULTURAL walking floor SANH 70 cbm First registered 05/ 2024, in new condition Dimensions i.L. (LxWxH) 12,213 x 2,475 x 2,300 mm Volume approx. 70 cbm Empty weight only 7,010 kg Njdpfxov Dz Ixs Ab Rsdd Fifth wheel height approx. 1,250 - 1,300 mm Total height approx. 3,850 mm Aluminum short chassis over the axles SAF axles with large disc brakes, 430 mm, reinforced "Off-Road" version Wabco Trailer EBS with RSS stabilization system 1st axle LIFT AXLE 3rd axle self-steering Tires 6-fold 385/65 R 22.5 ALUMINUM drop supports full load (2x 10 t.) 4x LED work lights Cargofloor moving floor agricultural version with 15 boards 6 mm smooth End caps aluminum welded RADIO remote control Side wall panels complete welded (grain version) rear portal support pivots at the top hydraulic connections at the top and also at the bottom of the support legs roof crossbar reinforced version, galvanized integrated grain discharge funnel at the rear, outlet opening downwards, operation from the side RENTING is the new BUYING, also available from us as a full-service rental-----

Condition: new, IPETRONIK interior simulation box Here we offer you an IPETRONIK indoor simulation box. Technical data and description of the equipment: IPETRONIK interior simulation box ( new and unused ). The interior simulation box is intended to simulate the passenger compartment for tests in recirculation mode. It has a variable interior space from 1,8 to 4m³. The exhaust air volume flow from the front evaporator or the air conditioning unit is fed into the interior in a controlled manner. Only rear evaporators installed in the passenger compartment are tested with the interior simulation box. The insulation chamber is mounted on an aluminum profile frame with rollers. A light is installed in the chamber. The box is protected against overtemperature by a safety thermostat (Esti). If the permissible temperature is exceeded, a glass cartridge in the ESTI is destroyed. The installation is stopped. (TRIGGER TEMPERATURE: 80°C) Technical data of the isolation chamber: Dimensions: Outside: width 1.860 mm depth 2.360 mm height 1.360 mm Inside: Width 1.700 mm Depth 2.200 mm Height 1.200 mm Insulation: 80 mm polyurethane rigid foam, foamed CFC-free, U-value 0.27 W/m2K, building material class B1 according to DIN 4102. Technical data and description of the system: Connection: Tongue and groove system with foamed-in eccentric closing hooks. Surfaces: Both sides: 0.8 mm stainless steel sheet 1.4301, ground, grain 320 Bottom finish: 2.0 mm stainless steel sheet 1.4301, SM rhombus, anti-slip, bottom beveled 90 ° all around (approx. 15 mm), bottom plate flush with wall plate, Pressure distribution plate made of laminated wood, 1,500 N/rubber wheel loadable (contact area > 4 cm2), 30,000 N/m2 surface load, floor joints completely welded, welded-in stainless steel pipe as floor drain, led out through the floor to the bottom Chamber door: Hatch door, 1-leaf, 800 x 1200 mm i.l., DIN left, heated door frame (230 V), heating bands silicone-free, 4-sided sealing profile made of EPDM, pess lever lock, lockable, emergency release, heated viewing window, 500 x 500 mm, triple glazed, surface heating (230 V), frame heating (230 V), heating controlled on site, silicone-free lipping Movable wall: 1680 x 1180 mm, 80 mm rigid polyurethane foam, 0.8 mm stainless steel sheet 1.4301 on both sides, ground, grit 320, with protective foil, closed on both sides with sheet metal (The rear wall is manually infinitely adjustable for volume change). Recirculation system: For temperature control, a heat exchanger (Systemair) is mounted in the recirculation section for indirect temperature control. The air is conveyed by a radial tube fan (Cosmo), heating is provided by an electric heater integrated in the brine circuit, electric heater (Türk and Hillinger) integrated into the brine circuit. The heaters are continuously monitored by temperature monitors and limiters (Türk and Hillinger, Johnsson Controls). Cooling is provided by a secondary brine circuit with pumps (KSB) and 3-way valve (Belimo). Installed electrical heating capacity 1 * 6kW. The mixing ratio is 50% water / 50% ethylene glycol. Feeding from station: =TME2++AS-QF21 Njdpslypy Eofx Ab Rodd Operating voltage: 400V Power: 17kW Rated current: 33A Back-up fuse: 35A Control voltage: 24V DC /24V AC /230V AC PLC - System: S7 300 Type: IPETRONIK indoor simulation box Condition: used / used Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) Further questions we can answer on the phone for you.

Condition: excellent (used), Year of construction: 2017, operating hours: 8,000 h, Kuhn SPW 22 Intense is a self-propelled animal feed wagon with two drums inside with an impressive capacity of up to 22 cubic meters! The machine from the first user, has an original mileage of less than 8,000 motor hours. Regularly serviced and used. It has many new parts such as: Conveyor belt New drum milling head New planetary gear Engine oils and filters - We accept various forms of payment such as Leasing, credit or classic transfer. We also offer transport within Poland or the European Union more information from the seller! - Equipment: Cabin Ndjdpfx Ajwbqm Reb Red Heating Radio Wipers Backlight 4-wheel drive Reversing camera Grimmer seat - Transport dimensions: Length: 11m Width: 2.5m Height: 3.1m Weight approx.: 16200kg - Technical data: Fiat engine (FPT) 165 kW - 224HP ----- Note! For Export and for companies to deduct VAT, they apply in net value. Discount possible for individual customers - ----- We provide professional, free advice and are characterized by an individual approach to the customer. We will always give you reliable advice even if you are in arrears with repayments or are in the Bik and Krd databases. - We have attractive credit or leasing conditions. Detailed information about financing will be provided by our representative Mr. Tomasz at tel.: 667910542 —— THIS ANNOUNCEMENT IS FOR INFORMATIONAL PURPOSES ONLY AND DOES NOT CONSTITUTE AN OFFER IN THE MEANING OF ART. 66, § 1. OF THE CIVIL CODE. OUR COMPANY IS NOT RESPONSIBLE FOR MINOR ERRORS OR INCOMPLETE INFORMATION CONTAINED IN THE ANNOUNCEMENT OR OUT-OF-DATE.

Condition: as good as new (ex-display), Year of construction: 2025, Compact wide belt sander with combined sanding unit Action equipment: - Switching the sanding shoe on and off from the control panel - Switching the roller on and off from the control panel Nedpfx Abjgf Sw No Rodd - Electronic control Fox 500 KTR - Table extension with 2 rollers with infeed and outfeed - Automatic table positioning with push button Item number: 5222100A2 Also for smaller craft workshops for occasional use Combination sanding unit with sanding shoe for fine sanding As standard with angular grooved steel roller Ø 120 mm for calibrating Fine adjustment of the working height Clearly arranged control panel on the front side Robust tube-stiffened monoblock steel machine body, robot-welded, working units mounted high up for maximum rigidity Motorized height adjustment of the work table with digital display Electronically controlled sanding belt oscillation Carpet feed via gear motor with two speeds Natural rubber feed carpet with negative profile Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of or behind each working unit Pneumatic belt tensioning for each unit with decimal correction option for grain size / belt thickness Universal use for solid wood and veneer thanks to combination unit Entry model for smaller companies Working width 950 mm Equipment details Combination unit for calibrating and grinding Angled steel roller Ø 120 mm with fine height adjustment Hard grinding shoe with graphite support Universal design for calibrating

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size Njdpsxxkuyefx Ab Rodd

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm Ndsdpfx Abswhp Dzj Rsd - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock