Used Granulator for sale (701)

Condition: new, The Zerma ZCS shredder combines leading shredder and granulator technology in a single, compact unit. By developing the combination of shredder and granulator, ZERMA has successfully expanded its product portfolio. Through the interplay of the proven design and high torque of the single-shaft shredder with a highly efficient granulator, ZERMA is able to deliver a reliable and compact pre-shredding system. The shredder and granulator are driven separately, providing better process control throughout. To further improve efficiency, the ZERMA Smart Drive System is used to constantly monitor the load and adjust the current accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where consistent quality in shredding and granulating is required. Typical applications include, but are not limited to, the following: Injection molding Thermoforming Knedpfeyr Tg Tsx Alyjc Blow molding Recycling Extrusion Waste

Condition: as good as new (ex-display), functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, workpiece width (max.): 60 mm, workpiece length (max.): 140 mm, feed rate X-axis: 12 m/min, with approximately 4000 m of operating distance. Comes with a new machine warranty. The machine is sold without the depicted return system. The minimum workpiece width varies depending on the workpiece length, height, and surface quality: 70. Processing of roll material in thick PVC/ABS from 0.4–3.0 mm & strip material with a thickness of 0.4–12 mm. “e-motion” control system with an 18” touch-color screen with integrated maintenance software and available network connection. Stable machine stand made of steel. Extendable workpiece support facilitates working with large workpieces. Motor-controlled, positionable pressure bar with 2 offset arranged roller guides for even pressure distribution on the workpiece. Chain feed with rubberized support pads for optimal hold on the workpiece. Ball-bearing roller support plate with Ø 770 mm. Feed guide rail with sliding rollers for sensitive materials. Edge trimming unit with tool-controlled diamond cutters and 2 motors each with 1.5 kW, 12000 rpm. Chip removal is adjustable from 0–3 mm via motor-controlled positioning, including 2 diamond cutters Ø 80 mm, H 49 mm, Z2+2. Edge detection using an infrared sensor. Shear cutter for pre-capping thick PVC/ABS edge materials. Teflon-coated gluing unit with a capacity of 1.5 kg, application via a finely adjustable glue roller & quick-change system, as well as heating cartridge monitoring (~ 250 m/min per 1 kg of granules on a 19 mm board). Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. Pneumatically tool-controlled gluing unit. Motor-controlled, positionable pressure unit with 1 large driven pressure roller and 2 conical follow-up rollers, pneumatically pre-tensioned. Cutting saw unit with 2 independent motors each with 0.50 kW, 12000 rpm, pneumatically swiveling 0–15°. Multi-function trimming unit for radius, flush and chamfer trimming of thin edges with 2 independent motors each with 0.75 kW, 12000 rpm, motor-controlled edge adjustment & pneumatic retraction function from the control panel. Corner processing unit for soft- and post-forming workpieces for processing the end edges with 0.4–3.0 mm edge thickness & 10–60 mm workpiece height. 2-axis motor-controlled, positionable radius drawing blade unit including pneumatic retraction function. Polishing unit with 2 motors. Special equipment 020 Surface drawing blade, pneumatically tool-controlled 032 Spray device for cleaning agents before the polishing unit 042 Spray device for release agents on the machine infeed side (PUR adhesive) 046 Extended feed guide rail (+400 mm) 047 Edge trimming cutter with interchangeable inserts, 64 mm height instead of 49 mm, 2 motors each with 2.2 kW instead of 1.5 kW 051 Multi-function trimming unit with vertical multiple rollers for processing workpieces with pot-band holes Ksdpfx Aszcymholyonc 053 Spraying of lubricant Pneumatic-mechanical insertion lock to prevent premature feeding of the machine 059 Automatic lubrication for the chain conveyor 064 Pneumatic-mechanical insertion lock 067 Reversing function for the glue tank. Ideally suited for applying solid wood edge strips or laminate edges. 050A Additional interchangeable glue tank, counter-rotating 090 “classic” multi-function & radius drawing blade unit e-motion with radius 1+2 mm 071 Motor-controlled adjustment and positioning for corner rounding cutters 085 Preparation for u-motion professional 033 LED lighting 505 Exhaust distributor professional Includes delivery & inst

Condition: new, Year of construction: 2026, overall weight: 5,550 kg, rotor diameter: 520 mm, number of blades: 82, total length: 2,260 mm, total height: 2,650 mm, total width: 3,000 mm, rotor length: 1,200 mm, rotor width: 350 mm, power: 50 kW (67.98 HP), warranty duration: 12 months, blade width: 50 mm, blade diameter: 50 mm, MIZAR SSH Series - Single Shaft Shredder / Einwellenzerkleinerer for Cables, Plastics & E-Waste Controlled Size Reduction with Intelligent Feeding System The MIZAR SSH Series is engineered for efficient and controlled shredding of a wide range of materials including cables, textiles, plastics, tires, electronic scrap, and various metal types. Designed for reliability, flexibility, and consistent output size, SSH shredders are ideal for recycling facilities requiring uniform material preparation before granulation or further processing. SMART SHREDDING TECHNOLOGY & ADVANTAGES • Single Rotor – Maximum Control: Customized high-alloy wear-resistant steel blades mounted on a robust single shaft ensure aggressive intake and efficient size reduction across mixed material streams. Kodpeyyupgjfx Alyonc • Programmable Hydraulic Pusher: An intelligent hydraulic feeding system continuously pushes material toward the rotor, optimizing throughput and preventing idle rotation. • Automatic Anti-Jam System: In case of overload or blockage, the rotor automatically reverses direction. This protects the machine and ensures uninterrupted operation. • Screen-Controlled Output Size: A heavy-duty screen located beneath the rotor determines the final particle size. Material remains inside the chamber until it reaches the required dimensions, ensuring a homogeneous output. • Industrial-Grade Components: Siemens/WEG motors, SKF/FAG bearings, and Schneider or ABB electrical systems ensure durability and long service intervals. Fully CE-certified for international compliance. APPLICATION AREAS • Cable Recycling: Copper and aluminum cables, wiring harnesses. • Plastic Materials: HDPE, PET, film, lumps, injection waste. • Electronic Scrap (WEEE): PCBs, electronic components, mixed e-waste. • Textile & Tires: Industrial textile scrap, fabric waste, car and light truck tires (pre-cut). • Metals: Aluminum scrap, radiators, light metal fractions. MODEL RANGE & TECHNICAL HIGHLIGHTS (Please ask for the exact configuration and screen size based on your material) • SSH S1: Compact solution for medium-scale operations. • SSH M1: Balanced performance for diverse recycling needs. • SSH L1: High-capacity industrial model for continuous operation. • SSH XL1: Heavy-duty configuration for the most demanding throughput requirements. Why Mizar SSH? • Precise output size control via interchangeable screens • Stable and intelligent hydraulic feeding system • Reduced downtime with automatic reverse function • Low maintenance design with accessible rotor chamber • Seamless integration into complete recycling lines Need a tailored shredding solution? Contact us for a customized quotation, technical drawings, or send your material for a performance test. Mizar Recycling Machinery

Condition: used, Year of construction: 2004, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 900, power: 3 kW (4.08 HP), Description Type: EH 400/1 Serial number: 900 Year of manufacture: 2004 Voltage/frequency: 400 V/50 Hz Rated power: 3 kW Boc Hpyfijw Niuho Dewt CE certified: Yes Device description: Knodpfx Ajzgblrslyec Industrial shredder or crusher (shredder/granulator). Notable features in the pictures: System with rotating blades (shredding unit) on a 2 mm shaft 3 kW SEW motor and reduction gear 8 mm screen (the screen is marked ‘8 mm screen’) – indicates the size of the output particles Rollable, transportable design Material discharge container and lower motor system Machines of this type are generally used to shred the following materials: Plastic Rubber Wood Light metal shavings Electronic scrap

Year of construction: 2003, condition: good (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology -Manufacturer: Rapid, Granulator Hammer Mill Cutting Mill Mobile -Type: 1528 -Drive motor: 2.2 kW -Funnel opening: 280 x 180 mm -Outlet: 280 x 180 mm -Sieve: Hole size 6 mm -Quantity: 1 cutting mill available -Dimensions: 600/550/H1140 mm -Weight: 183 kg Knjdpfx Aezn Iqkjlyoc

Year of construction: 1994, condition: excellent (used), functionality: fully functional, Manufacturer: Rapid Knedpfxowg R S Ro Alyoc Model: 2645-KU 3 rotor knives 2 stator knives Power: 12 kW Slow-speed granulator with soundproof enclosures PRICE REDUCED FROM 4,250 TO 3,850 EUR!!!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MZBF02, Equipment: Android Auto, CE marking, The production line can widely used to filling,capping and labeling for various semi-liquid,ointment paste, dense catsup and various materials with granule, such as drinks with fruit, honey,syrup,jam, peanut butter, sesame paste,tomato sauce, peper sauce, etc.Operating principle By the reciprocating motion of the pistons in the material cylinders of the Filling Machine, negative pressure produces in the front chamber of the cylinder so that material could be pumped. The stroke of the cylinder is controlled by a signal valve so as to adjust filing amount and to achieve accurate filling results.Property The Filling Machine with extra functions is designed and manufactured by our factory with reference to the same kind of foreign machines. Knsdpsxunctsfx Alyjc

Year of construction: 2026, condition: new, Josan & Söhne ‼️ NEW – NOW EQUIPPED WITH SIEMENS TOUCH SCREEN ‼️ For easier operation and enhanced control! Leasing options available directly through us! Linear payment schedule with no balloon payment at the end! - 36 months: rate factor 3.0694% - 48 months: rate factor 2.3697% - 60 months: rate factor 1.9456% German quality, CE-certified, compliant with EU standards, and available for live demonstration. We recommend purchasing locally here in Germany for German warranties, legal security, fixed prices, and future German-speaking support – available exclusively for machines bought directly from us. Visit us and see the quality for yourself – live demos are available on-site by appointment. ‼️ Our latest innovation – a unique system, only available with us in Heilbronn. Water-cooled, highly efficient, producing ultra-clean copper granulate (99.7%). We are a German company operating under German law. Top-quality with warranty and service. Our certified, German-speaking technicians provide ongoing support, including our own fleet of trucks and service vans for fast assistance and expert guidance. Experience Josan Recycling quality at an excellent price – don’t rely solely on pictures and videos for your purchase decision. We granulate ourselves and show you live demonstrations of our machines. The S600, developed and assembled in Germany, features water cooling and integrated fans. Kjdpfx Aowyx Rzjlyenc From small businesses, SMEs, and startups to large enterprises, we offer customized solutions – including financing, hire-purchase, or leasing. Process household cables, industrial cables, telephone cables, and more with our copper granulation plants to achieve up to 99.7% copper separation. The PVC fraction is also separated and can be sold to recyclers for further processing. Source your cables locally and produce copper – recycling in an environmentally responsible way saves resources. Generate copper (and revenue) with our recycling plants. Our systems also enable copper radiator separation: - Input: copper/aluminum radiators - Output: segregated copper and aluminum Ferrous parts and screws are separated by the integrated magnetic belt (pre-shredding required). Become a copper prospector and produce copper in an eco-friendly way. Because we use our own equipment for processing, our machines are continuously modernized for longevity and technological advancement. Maintenance, spare parts, modifications, and upgrades are handled directly by our trained staff. Granulation Plant S600 - For cables from 1–40 mm - Up to approx. 500 kg/h input capacity – at 50% copper content, 10 kg of input yields 5 kg of 99.7% pure copper granulate, which can be sold at top market prices - Total connected load: 49 kW (without shredder) - Separator tables included - 380 V power connection required - UVV (accident prevention regulation) compliance performed by a certified German company - Magnetic belt included (for steel separation) - Uncompromising quality: Only premium Siemens components used in control cabinet construction - The system can be individually configured – we advise you personally. Price on request. All information subject to change. Images/descriptions may differ.

Condition: new, Year of construction: 2026, overall weight: 6,500 kg, power: 75 kW (101.97 HP), shaft diameter: 1,200 mm, warranty duration: 12 months, MIZAR ERP Series - Eco Cable Recycling Plant & Copper Wire Granulator High-Purity Copper Recovery with Minimal Energy Consumption The ERP (Eco Recycling Plant) Series is Mizar’s latest innovation in eco-friendly cable recycling. Engineered to deliver maximum copper recovery with minimal energy consumption, this high-performance system provides a space-saving, sustainable solution for separating metal and plastic components from scrap cables with up to 99% purity. CORE COMPONENTS (Advanced 3-in-1 System) • Fine Granulator (FGR): Precision size reduction to prepare scrap cables for optimal separation. • Densimetric Separator (DES): Precise, density-based dry classification for the final separation of pure copper and plastics. • Dust Collector (DTF): Centralized filtration system ensuring a clean, low-dust, and eco-friendly workspace. KEY ADVANTAGES & FEATURES • Eco-Friendly & Energy Efficient: Optimized material flow drastically reduces power consumption while maintaining high throughput. • Smart Operation: PLC-controlled touch-screen interface for real-time monitoring and easy handling. • Compact & Versatile: Space-saving design that works perfectly as a standalone copper wire granulator or as part of a larger recycling line. • Heavy-Duty Durability: CE-certified and manufactured with premium-grade materials for long-term industrial use. MODEL RANGE & TECHNICAL SPECIFICATIONS • ERP S1: Capacity: Up to 400 kg/h | Total Power: 30 kW | Rotor: 350x400 mm | Blades (R+S): 7+2 • ERP M1: Capacity: Up to 800 kg/h | Total Power: 50 kW | Rotor: 350x800 mm | Blades (R+S): 14+4 Kjdpfx Alsxb A S Noyjnc • ERP L1: Capacity: Up to 1,300 kg/h | Total Power: 72 kW | Rotor: 350x1200 mm | Blades (R+S): 21+6 • ERP XL1: Capacity: Up to 2,000 kg/h | Total Power: 102 kW | Rotor: 350x1600 mm | Blades (R+S): 28+8 Ready to optimize your cable recycling with eco-friendly technology? Contact us for a customized quotation, technical drawings, or to arrange a performance test. Mizar Recycling Machinery

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Kodpfxeyu Undj Alyonc Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: good (used), 3 x 65 m³ aluminum silo (granulate storage silos) with long frame (used) Contents approx. 65,000 liters Diameter (inside) approx. 3,000 mm Total height approx. 12,000 mm Bulk density: 0.6 kg/dm³ Cone inclination: 90 degrees Connections in the topsoil: 1 vent nozzle with hood DN 200 1 flange nozzle DN 100 In the shell: 1 folding dome DN 450 1 filling pipe pulled downwards DN 80 Cone: The cone ends in a flange DN 150 with suction box otherwise as per sketch and photos Knsdpfovmidyjx Alyjc

Year of construction: 2017, condition: excellent (used), Included: screw conveyor; vibrating conveyor pipe with vibration motor drive. Total height: approx. 9250 mm Effective conveying height: 5800 mm Outer diameter: Ø 1200 mm Conveyor cross section: 300 x 100 mm Feeding height: approx. 1650 mm (machine) approx. 3100 mm (incl. support) discharge height: approx. 8900 mm (incl. support) number of spiral shelves: approx. 32 pieces heat exchanger surface: approx. 27,5 m² number of cooling/heating circuits: 32 pieces Material: stainless steel Knedpfx Alsinwfieyec So far in use for conveying and cooling of granules and glass fibers (approx. 2.5 t/h) Free loading; Currently, the device can still be viewed built in operation.

Year of construction: 2026, condition: new, ‼️SONDERANGEBOT‼️HIER IN STOCK IN HEILBRONN! Only while stocks last! ‼️SOFORT AVAILABLE ‼️AUF LAGER‼️ Kedpfjp E Ehqsx Alyenc Powerful, robust machine at an affordable price from Josan & Söhne Alligator shears small: ➡️3 kw motor ➡️7 up to 8 shear strokes per minute. ➡️Maße 1100x980x800 mm ➡️Gewicht approx. 275 kg ➡️Spannweite 15cm ➡️Messer can be turned over at some point when they are blunt, allowing you to work with them for longer ➡️UVV (accident prevention regulation) made by German company here Net 3.999,00€ +19% VAT 759,81€ Gross 4.758,81€ Alligator scissors large: ➡️Motor 7,5 kw ➡️30 cm span ➡️7 up to 8 shear strokes per minute. ➡️Maße 249x109x174 cm ➡️Gewicht approx. 1500 kg ➡️Messer can be turned over at some point when they are blunt and thus work longer with them ➡️630 KN pressure ➡️Hydraulikdruck 21 mpa ➡️UVV (accident prevention regulation) made by German company here PRICE ON REQUEST Pictures/equipment may vary. Errors/changes excepted

Condition: new, functionality: fully functional, Unused single-screw extruder / recycling extruder - Screw diameter: 140mm - Drive: Siemens motor, 95 kW - Volumetric K-Tron metering system - Degassing zone - Optionally with die head - Control system Optionally with strand granulator, water bath, etc. Ksdpfxjqy E Eve Alyenc Inspection possible by arrangement.

Year of construction: 1996, condition: reconditioned (used), Stock-No.1624 Strand "spagetti" pelletizer Capacity 500 kg/h Drive 4 kW Rotor width 200 mm - double bearring materials: PP,PE,PS,PET,PC,PA div material Noise- protected housing box OPTIONAL against additional cost: Knedpfx Aloby I Syoysc adjustable pellet length device Ask for our machine-stock-list, with more pelletizing equipment ex our stock availabe.

Condition: new, SAPI high-performance injector blasting cabinet type "T-Rex 140 Double-Power" with integrated cartridge filter system. Combines pressure blasting and injector blasting in one blasting system. A blasting cabinet for all applications! The "T-Rex 140 Double-Power" pressure/injector blasting cabinet can be used either in pressure blasting or injector blasting mode. This allows for even the most difficult blasting work to be carried out. The also integrated injector blasting mode can be used for lighter blasting tasks, saving on expensive compressed air. The blasting mode (pressure blasting or injector blasting) is easily selected using a selector switch on the cabinet base. The compact, combined pressure/injector blasting cabinet has an integrated cartridge filter extraction system. Thanks to the permanently installed filter system, the sandblasting cabinet requires little space and is easily transported using a pallet truck or forklift. Knedpjupzmusfx Alysc The compact design of the blasting cabinet makes it ready for immediate use; all that's required is to connect the compressed air and power supplies and fill it with abrasive. The integrated cartridge filter extraction system ensures optimal visibility in the blasting chamber. At the same time, optimal abrasive cleaning is achieved, allowing the blasting material to be reused as often as possible. The use of state-of-the-art fan technology results in an extremely low power consumption (0.75 kW), making the injector blasting cabinet extremely economical. Our high-performance injector blasting head (fresh blasting head) creates a high negative pressure and thus achieves high blasting performance, enabling fast, economical work with the vacuum blasting cabinet. The blasting nozzle is made of boron carbide and achieves extremely long service life, even when using corundum blasting media. The pressure blasting head is also equipped with a boron carbide blasting nozzle for maximum service life. A modern, energy-saving LED light is mounted on the cabin roof, protected from dust, to illuminate the blasting chamber. This ensures optimal illumination of the blasting chamber and enables fast, fatigue-free, and economical work. Our sandblasting cabinets are constructed from sturdy sheet steel, allowing for a high load-bearing capacity of the work grid. All SAPI blasting cabinets comply with all current safety standards and are equipped with a door safety switch that immediately stops the blasting process if the cabinet is opened during blasting. Metal blasting media, cast steel, steel grit, chilled cast iron, stainless steel blasting media, corundum, glass beads, plastic granules, vegetable granules, etc. can be used as blasting media.

Condition: used, Year of construction: 2010, 1. Edge banding machine Manufacturer: Homag Type: KAL 210 Ambition 2264 Year of manufacture: 2010 Technical data Release agent spraying system Joint milling unit (2 x 4 kW) Glue application A20 (granule/quick-melt system) Pressure zone with driven pressure rollers Miter saw HL84 (2 motors) Flush-/radius-/chamfer milling unit BF10/BF20 Corner copying unit FK11 (2 motors) Profile drawing blade PN10 Kjdpfxozuyilo Alyenc Straight drawing blade for glue joint Buffing unit (polishing) Release agent and cleaning agent spraying system at the outfeed Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: new, Year of construction: 2026, power: 14 kW (19.03 HP), temperature: 90 °C, total length: 1,500 mm, total height: 2,450 mm, overall weight: 790 kg, actuation type: electric, The BDX-F2000 Drying Hopper Mixer is a high-capacity industrial unit designed for simultaneous drying and mixing of plastic granules before processing. By combining efficient hot-air drying with continuous material agitation, the system ensures uniform moisture removal and consistent material quality throughout the entire batch. Technical Specifications • Model: BDX-F2000 • Hopper capacity: 1800 L • Heating power: 18 kW Kodpfx Ajzvxc Hjlyonc • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 500–1000 kg/h (depending on material) • Dimensions: 2450 × 1500 mm • Weight: 790 kg • Material of construction: AISI stainless steel Model: BDX-F1000 • Hopper capacity: 900 L • Heating power: 14 kW • Mixing screw motor: 3 kW • Blower power: 0.55 kW • Throughput: 300–500 kg/h (depending on material) • Dimensions: 2300 × 1100 mm • Weight: 690 kg • Material of construction: AISI stainless steel Efficient Drying and Mixing The BDX-series combines two essential processes into one machine: • Hot-air drying for efficient moisture removal • Continuous screw mixing for uniform temperature distribution The integrated mixing system continuously circulates the material inside the hopper, preventing localized overheating and ensuring that every granule receives the same drying conditions. This results in faster, more consistent drying and improved processing stability. The hopper is manufactured from high-quality stainless steel. Applications The BDX-series is suitable for drying and mixing: • PE (LDPE & HDPE) • PP • PVC • PET • ABS • PA (Nylon) • PC • Engineering plastics • Virgin material • Recycled plastic granules • Masterbatch blends It is ideal for extrusion, injection molding, blow molding, compounding, and recycling operations.

Condition: new, Year of construction: 2026, overall weight: 100 kg, total height: 100 mm, total width: 900 mm, total length: 800 mm, power: 1.5 kW (2.04 HP), The XHS-series Vertical Mixer is designed for fast and uniform mixing of plastic granules, masterbatch, recycled materials, and additives before processing. Its efficient paddle mixing system provides excellent blending performance while minimizing energy consumption. The mixer features a durable stainless steel hopper and mixing blades, ensuring long service life, easy cleaning, and contamination-free material handling. It is suitable for extrusion, injection molding, blow molding, compounding, and plastic recycling applications. Technical Specifications • Model: XHS-50V • Hopper capacity: 50 L • Mixing capacity: 20 kg per batch • Mixing time: 20 kg in 6–8 minutes • Mixing motor power: 1.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 800 x 900 x 1000 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 100 kg • Control system: Control box with timer relay • Model: XHS-100V • Hopper capacity: 100 L • Mixing capacity: 40-50 kg per batch • Mixing time: 50 kg in 6–8 minutes • Mixing motor power: 3 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 960 x 1000 x 1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 150 kg • Control system: Control box with timer relay • Model: XHS-150V • Hopper capacity: 150 L • Mixing capacity: 50-70 kg per batch • Mixing time: 75 kg in 6–8 minutes • Mixing motor power: 4 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1080 x 1080 x1200 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 210 kg • Control system: Control box with timer relay • Model: XHS-250V • Hopper capacity: 250 L Knsdpfezvxl Isx Alyoc • Mixing capacity: 100–120 kg per batch • Mixing time: 120 kg in 6–8 minutes • Mixing motor power: 7.5 kW • Paddle speed: 50–60 rpm • Power supply: 380 V, 3-phase • Dimensions (L × W × H): 1400*1200*1550 mm • Construction: Stainless steel hopper and mixing paddles • Weight: 290 kg • Control system: Control box with timer relay Efficient Mixing System The XHS-250V uses horizontally rotating stainless steel paddles that provide fast and homogeneous mixing of plastic materials. The paddle geometry is designed to maximize mixing efficiency while keeping power consumption low. The robust mixing blades offer excellent wear resistance, long service life, and can be cleaned quickly between production batches. Easy Material Discharge The mixer is equipped with a bottom discharge outlet, allowing quick and convenient unloading of mixed material directly into containers, vacuum loaders, or processing equipment.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, machine/vehicle number: P02/194, Equipment: CE marking, The machine was completely refurbished between 2020 and 2021, including overhauling the spindle, electrical panel, installing a second filter, touchscreen, PLC, temperature control (solid-state relay), internet access, repainting, etc. Knedsz I Tghepfx Alyec The machine is currently in production.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 1009456, total height: 1,350 mm, total width: 600 mm, total length: 700 mm, overall weight: 30 kg, type of input current: AC, input voltage: 230 V, input current: 6 A, Equipment: documentation/manual, Audion PANDYNO Bag Filling and Sealing Machine For sale is an Audion PANDYNO bag filling and foil sealing machine on a mobile stainless steel frame. Kodpfsz Hyr Iox Alyonc This system is suitable for filling and sealing bags with powders, granules, and similar products. The machine is in good condition and is offered with documentation. It has only been used for food products.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 27 mm, Warehouse – No. 2875 1 used compounding and granulation line, partially overhauled in 2026 and functionally tested, consisting of: Brabender gravimetric 2-component dosing system (expandable, optional at extra cost) with 1x FlexWall 40, 1x DDW-MD5, Congrav RC4 stand-alone control Twin-screw extruder Leistritz type ZSE 27 HP Knjdpfx Alez A Sxleysc Co-rotating, self-cleaning, segmented screws and cylinder with intensive cooling. Screws 2x Ø 27 mm - 36 L/D with 8 cylinder zones with 3 degassing zones, 1 vacuum pump 1.5 kW Screw speed up to 1,200 rpm - adjustable Extruder drive 33.8 kW - heating power 9.8 kW installed Melt pressure sensor Control system Macromatex III MAAG Gala underwater granulation system type LPU, model SLC 5, including: Polymer start-up valve with hydraulics Die plate 20°, granulator SLC 5 with 1.5 kW drive Water box – temperature-controlled water system with Granulate centrifugal dryer type 1150, 1.5 kW drive Xantec control system Siemens Accessories: Single tempering unit for the extruder processing section The system is ready for demonstration; a test run / sample production with your material is possible on short notice. Details and dates upon request. We have other compounding extruders available ex-works: Alphatec, Coperion, Leistritz, Berstorff-Krauss Maffei, as well as all accessories: granulation systems (BKG - MAAG gala, Sikoplast, IPS, Scheer, ...), melt filters (BKG, Ettlinger, Alphatec, ...). Commissioning / training for all our systems can be carried out by our technicians; details upon request.

Year of construction: 2021, operating hours: 808 h, condition: ready for operation (used), functionality: fully functional, For sale is a vibration tunnel manufactured according to a custom design, intended for continuous transport and irradiation of bulk materials and other products suitable for vibration transport. The device was made to order, and its design was created with a specific technological process in mind. The entire unit is made of acid-resistant steel. The tunnel is equipped with 20 Philips TUV lamps, each with a power of 75 W, placed above the transport surface. During operation, the product is continuously transported through the tunnel and simultaneously exposed to UV-C radiation. 1. UV-C Application The UV-C system can be used for surface irradiation of products to reduce the number of microorganisms. Originally, the device was designed for use, among other things, for: • seed material, • grains, • herbs, • vegetables, • other suitable bulk products. The effectiveness of the UV-C process depends on factors such as the type of product, its properties, the thickness of the layer, and the exposure time. The possibility and effectiveness of using the device should be verified each time for a specific product and technological process. 2. Adaptability to Other Applications A significant advantage of the device is its individually designed, modular construction, which allows for further adaptation to the user's needs. After removing or modifying the UV-C system, the structure can be used as: • a vibration conveyor for bulk materials, • a vibration feeder, • a dispenser, • a device for evenly distributing the product, • an element of a process line that feeds the product to the next stage of the process, • a vibration screener – after using appropriate screens, • a device for transporting seeds, grains, spices, herbs, granules, and other materials such as pellets, frozen, and fresh vegetables and fruits suitable for vibration transport. The construction can serve as a basis for further individual adaptation according to the requirements of a specific production process. 3. Construction The device is entirely made of acid-resistant steel, using two Italvibra vibration motors and Rosta suspensions. Philips TUV lamps, each with a power of 75 W, are located above the transport surface. Shatterproof lamp covers have been used to increase safety in a production environment. The construction provides access to the working elements and allows for further modifications to the device depending on the planned application. 4. Device Condition Upon request, we can provide additional photos, videos, technical information, and discuss the possibilities of adapting the device to a specific application. 5. Technical Specifications Parameter Data Type of device UV-C vibration tunnel Design Custom design / made to order Construction Acid-resistant steel Tunnel length 420 CM UV-C lamps 20 × Philips TUV Lamp power 75 W Total UV-C lamp power 1500 W Product transport Vibration conveyor Vibration motors 2 × Italvibra Power adjustment Yes – adjustment of vibration force Suspension Rosta Operating mode Continuous operation Discharge Directly into a bag Knodoz A Tgwopfx Alyjc Overall dimensions 420 X 115 X120 Weight 400 KG Power supply 380V

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 750 kg, Industrial system designed for the safe and efficient emptying of bags and Big Bags, ideal for handling powders, granules, and dry bulk materials. Main Features Heavy-duty steel frame 4 pneumatic cylinders for complete bag emptying Ø 136 mm electric screw conveyor, customizable in X and Y dimensions Lower discharge slide gate FULL AISI 304 STAINLESS STEEL – FOOD GRADE Safety access door Integrated collection hopper Easy cleaning and maintenance Applications Ideal for the food industry, including: Bakeries and industrial bakeries Pasta and flour processing Confectionery and pastry production Pizza and frozen dough production Food premixes and powdered ingredients Knedpfez Dq Smjx Alyoc Animal feed production

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2025, 1.1 General Features Extruder Type - Horizontal Screw Diameter (D) - 30 mm Screw Length (L/D) - 25 net (L: Effective length as specified according to Euromap-20 standards) Raw Material - PVC-W (soft) / PE / PP / TPE / TPV (in granule form) Application - Gasket profile Capacity - 12-18 kg/h (Capacity may vary depending on the characteristics of the raw material) Extruder Zone - 5 = 3 + 2 (3 on the barrel, 2 for die-head control) Extruder Main Motor and Driver - 4 kW (Yılmaz Gearbox) / 4 kW Siemens/ABB AC Driver Extruder Control - Extruder Height - 900-1200 (adjustable) mm (Can be changed according to customer’s request) Die-Head Connection - Flange connection Extruder Colour - RAL 7043–RAL 7047–RAL 3020 (Extruder colour can be changed according to client’s request) Die-Head Unit - Not included Pressure and Temperature Sensor - Not included Electrical Panel - 380-400V / 50-60 Hz Languages - English 1.2 Technical Details Barrel - Barrel Dimension: Ø30/25D - Barrel Zone Number: 3 - Cooling System: Air - Heating System: Ceramic resistance - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The barrel is made of 1.8550 (DIN 12891) nitriding steel and long-term gas nitrided to 66-70 HRc with a hardness depth of 0.5 - 0.7 mm. - A flange connection will be used between the extruder and the die head. Screw - Screw Dimension: Ø30/25D - The manufacturer of the screw and barrel is TUV-certified ENFORMAK PT INC. - The material manufacturer of the screw and barrel is ISO 9001:2008-certified BGH EDELSTAHL from Germany. - The screw material is made of DIN 1.2891 (1.8550, 34 CrAlNi 7) nitriding steel and long-term gas nitrided to 66-70 HRc hardness at a depth of 0.6-0.7 mm. - The screw will be manufactured in an EBM Barrier design for good homogeneity. Heating System - Heating is provided by ceramic insulated band heaters, certified according to CE and ISO 9001:2008. - There are 3 heating zones on the barrel. Cooling System - Cooling is provided by centrifugal blowers from TUV-certified EBMpapst, Germany. - There are 3 air cooling zones on the barrel. Reducer Gearbox - A TUV-certified YILMAZ brand, 4 kW DRE series horizontal helical reduction gearbox will be used. - The motor has an additional cooler for protection against higher loads. - The motor speed will be controlled via an ABB ACS-880 brand 15 kW inverter drive. Knedpfozarn Eox Alyoc Electric Control Cabinet - The electric control cabinet is equipped with ISO 9001:2008-certified equipment. - There will be one main electrical panel. The control panel will be located on the extruder. - The extruder is controlled by the main electrical panel. - This includes speed control of the drive and zone temperatures, which will be controlled by this PLC system. - A 7” touch screen will be used on the extruder (master unit). Thanks to this panel, two extruders can be fully controlled. - The extruder’s screw speed can be adjusted steplessly by means of a 4 kW Siemens / ABB AC frequency motor driver. The following information can be accessed via the touch screen: ● Extruder screw speed, ● Zone temperature set points, ● Actual values, ● Extruder motor current, - more details available