Used Granulator for sale (671)

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Godoxmt Eqopfx Aabjbu

Condition: used, Motan NS-D05-SR-2, granulate loader and dryer, Motan granulate feeder, used machine Gbodpfexlpv Njx Aabou Manufacturer: Motan Type: NS-D05-ST-2 Overall dimensions: 750 x 750 x 2500 mm Year: 1990 Tank volume : ~280 liters Electrical data: 240 V; 2.4 kW; 10 A - with granulate suction unit - with electric heating

Condition: excellent (used), CATALOGUE NO. 7729 TECHNICAL DATA Equipment: - tape reel - adhesive tank (granulate) - tape feeder - guillotine – pre-cutting of edging Godsxaprgjpfx Aabebu - 2 pressure rollers - min. width of processed parts: 50mm - thickness of processed parts: 10-40mm - min. internal radius: 50mm - edging at angle with 1mm edge, 0-45° - edge thickness: 0.3-3mm - electric feed - total power: 2kW - compressed air pressure: 6-7 bar - dimensions L/W/H: 1700x1300x1550mm - weight: 310kg ADVANTAGES – Polish-made – Unpainted – DTR technical documentation – Very good condition – used edgebander Net price: 6500 PLN Net price: 1530 EUR (based on exchange rate 4.25 EUR) (Prices may change with major fluctuations)

Condition: used, Lange B90 KFE Edge thickness: 0.4 - 3 / 5 mm Control panel: PLC touch panel Pre-milling unit for pre-milling before the gluing section Automatic edge magazine for roll materials Teflon-coated quick-change glue pot for hot melt adhesive granules Workpiece height: 8 - 50 mm Finely adjustable glue roller Guillotine up to 3 mm for pre-cutting roll materials Pressure unit End trimming unit Multi-function milling unit for flush, radius and chamfer milling Corner copying unit for end edges up to 2 mm, switchable from the control panel Radius scraper blade Flat scraper blade Godpfsxl Aw Tsx Aabobu Buffing unit Spraying device at infeed and outfeed Year of manufacture: 2018 The machine is FUNCTIONAL and in GOOD CONDITION Ex works NET €17,000.00

Condition: ready for operation (used), Year of construction: 2024, Additional Equipment Application unit with Teflon coating for 1.5 kg EVA granulate Upper and lower polishing unit Godpfsxlu Ukex Aabsbu This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a turntable magazine with a diameter of 750 mm for edging material ranging from 0.4-3 mm, a GlueBox application unit, and upper and lower polishing units. The machine includes advanced x-motion Plus control with a 15' SmartTouch screen and a multifunctional milling unit for precise plastic edge machining. Contact us for more information about this machine. Application Types Edge Banding

Condition: new, Year of construction: 2025, ZDV Series - Circular Type Dryers For drying after deburring and polishing Gjdpfsl Sm N Tjx Aabobu Corn granule is used. Various volumes in the range of 125lt - 1650lt Includes seperating system- Resistance heated Drying for all kinds of metal and non-metal materials Suitable for automation system Optional accessories Dryer machines are used to dry the wet surfaces of the parts after the process in surface finishing machines where deburring, polishing, etc. are performed. At the same time, dryer machines help to prevent corrosion of the parts Corn cobs are used in dryer machines. Hot corn cobs absorb water from the surface of the parts during process. The dryer machines have a heating system with resistance. By the help of heating system, the drying speed increases and it saves time and energy. On the machine, there is a material loading point in order to transfer wet parts to the machine easily and a discharge slider which can take out the parts after drying easily. During drying process, the parts and corn cobs move through the ramp in the bowl to the self-discharge way. Activating the slider is enough to take out the dried parts. Thanks to ergonomically designedchassis height and springs, staff can work with high efficiency. Increased resistance against vibrations, rigid and reinforced support construction; adjustable insulators flexibly mounted to absorb vibrations are some of the distinctive design features of the machine chassis. Electrical panels with CE Certificate designed in accordance with EU standards are used. There are main switch and emergency stop switch. The working time controller and time clock are included in the standard equipment. Three-phase electrical connection is used. It can work integrated with automation systems with PLC software. Dust absorbing system is available as an option. The dimensions of the dryer machines are designed to work integrated with the previous processes surface finishing machines. Therefore, the products from the first process are able to be transferred to the material loading point of the dryer automatically.

Condition: used, Year of construction: 1995, Granulator / Knife Mill Manufacturer: CMB (France) Model: MS 610 NC Hjda Asxg Thrjza Spju Gedpjxg Th Sofx Aabobu Main motor: 90 kW Rotor length: 1000 mm Rotor diameter: 600 mm Rotor knives: 5 x 2 Stator knives: 2 x 4 + blower + big-bag station with cyclone + water cooling The machine was dismantled from the customer's facility and is stored in our warehouse.

Condition: ready for operation (used), Grinder, plastic grinder, shredder grinder, granulator, Moditec Gplus 3, Used machine Manufacturer: Moditec Type: G plus 3 Overall dimensions: Width: 870 mm Depth: 650 mm Height: 1040 mm Weight: 340 kg Year of manufacture: 2013 Electrical data: 400V, 50Hz, 1.5 kW Gbedpfx Aaexh Aygsbou Hopper size: 380 x 240 x 420

Condition: new, Year of construction: 2025, spindle speed (max.): 1,450 rpm, grinding spindle motor power: 7,500 W, grinding wheel diameter: 250 mm, We are a family producer of machines based in eastern Poland. All our machines are in 100% build in GRAFS factory in Poland. We present our heavy-duty but simple straight knife grinder suitable for a broad range of industrial knives, machine designed especially for: - different recycling blades, - chipper knives, (ALBACH, JENZ, BRUKS), - planer knives, - guilotine blades, - shredding knives, - granulator blades, The knife sharpening machine model SR Semi-auto can be supplied in different grinding lengths: mm 1.200, mm 1.800, mm 2.100 mm, 2.400 mm, 3.000 mm Sending inquiry to us, please let us know what grinding length you need. TECHNICAL FEATURES IN PRESENTED MODEL GRAFS SR: • Hand wheel for down feed of the grinding motor, • Automatic mechanical downfeed system (from 0,003 mm up to 0,03 mm) • Adjustable grinding parameters during operation (downfeed, number of head passes, spark-out passes). • Grinding wheel motor angle adjustment within 0–10° (for surface grinding). • Swiveling electromagnetic chuck / table with ±120° angular scale, “S” type polarity, magnetic force 120 N/cm². Equipped with T-slot channel on the operator side for clamping knives. • Exchangeable hardened steel guide strips on the machine guides ensuring long service life. • Manual positioning of the grinding head over the workpiece, (possibility of locking and unlocking carriage driving unit by lever), • Carriage movement relative to the trolley in the Y-axis, for centre head position relative the different knives angles. • Quick vertical travel of the grinding motor for faster setup and efficient grinding wheel replacement. • Reversal of grinding wheel rotation, • Powerful 7,5 kW grinding wheel motor for wheel sizes Ø175–250 mm. Quiet, vibration-free special grinding head, soft-start included, • Special wheel holder/adapter mounted on the motor shaft, allowing fast change of any grinding wheel (CBN, DIA, or segmented) using just 3 screws. • Automatic external magnetic coolant cleaner – MS60. • Variable carriage speed smoothly adjustable in the range 1–12 m/min. • Carriage run adjustment knob (potentiometer) for fine control. • Precision scale for downfeed / grinding motor position measurement. • Precision scale for blade angle measurement. • Complete documentation: manuals, operating system, electrical diagrams in English / German / Czech / Spanish, including EU Declaration of Conformity. • Base of the machine surface finish and protection: polyurethane anti-rust coating with acrylic hardener. Body painted RAL7012 or RAL7035; trolley and carriage RAL7021. • Adjustable anti-vibration leveling feet. • LED lamp in working area. • Very compact electric cabinet at the back of the machine base / body. • Coolant through the 2 nozzles either side of the grinding wheel, • Packing, shipment preparation, and truck loading included. FUNCTIONS INCLUDED: • Automatic down feed with mechanical feed system by ratchet, • Grinding wheel motor angle adjustment 0–10° (surface grinding option). • Smooth adjustment of carriage/head speed 1–16 m/min. Gsdpfx Asgwct Deabebu • Manual positioning of the grinding head over the workpiece. • Carriage relative movement in the Y-axis. • Capability of grinding knives up to 360 mm in height. • Quick up/down travel of the grinding motor for fast setup and wheel replacement. • Automatic coolant filtration system. We are a producer from Poland, we provide after sale support and service with 12 month's warranty.

Condition: excellent (used), Year of construction: 2011, Edge banding machine for edging and post-processing of panel materials Edge thickness for rolls: 0.4 - 3 mm Edge thickness for strips: 8 mm Max. 15 mm possible with tool change on the milling unit 1826 Edge height: max. 65 mm Workpiece thickness: 6 - 60 mm Workpiece width: min. 60 mm Workpiece length: min. 160 mm Feed speed: stepless 10 - 20 m/min Control unit PPC 221 – with 8.4" VGA color screen Motorized adjustment of the infeed fence, adjustable via control unit Pre-milling unit 1802 400 V (2 x 2.0 kW, 200 Hz, 12,000 rpm) Edge feed 1901 SYNCHRO Automatic feeding of roll and strip material Glue application system Glu Jet GJ301 automatic Automatic glue height adjustment (contact nozzle) Glu Jet hybrid technology – for processing EVA and PUR adhesives Glue application via nozzle technology Heat-up time: 3 minutes Glue granulate container 5 kg for GJ301 PRESSURE UNIT – Pressure section 1914-1 MOT END-TRIMMING UNIT – End-trimming unit KA 701 pneumatic (2 x 0.65 kW, 200 Hz, 12,000 rpm) Pneumatic swivel function 0/10° for coils and strips MULTIFUNCTIONAL END-TRIMMING UNIT End-trimming unit 1826 MOT4 (2 x 0.65 kW) with 4 NC servo drives for flush, radius, and chamfer cuts Gjdoxggmbspfx Aabjbu CORNER ROUNDING UNIT Profile milling unit 1833 MOT4 (2 x 0.65 kW, 200 Hz, 12000 rpm) Milling the top and bottom longitudinal edges, copy milling of the upper and lower front and rear longitudinal edges, corner rounding, postforming of corners with 4 adjustment motors SCRAPING UNIT 1927 MOT5 Carbide reversible blades for scraping knives 1929 R = 2.0 mm (2 pieces required) FLAT SCRAPER 1964 For removing excess glue to achieve a clean glue joint BUFFING UNIT 1944K (2 x 0.2 kW, 400 V, 1,400 rpm) For edge cleaning and polishing, incl. plunge control, incl. 2 textile buffing discs GROOVING UNIT 1841 1 x 3.8 kW, 200 Hz, 12,000 rpm, Saw blade Ø 160 mm, Cutting width 4–9 mm

Year of construction: 2002, operating hours: 20,204 h, condition: ready for operation (used), Control Unit Brand BATTENFELD This Battenfeld Vertical R60 125H was manufactured in 2002. It includes a Simar granulate dryer, enhancing its functionality. An optional package offers an Easychill water cooler and two single temperature control units for an additional cost. Contact us for more information about this machine. Gbodpfx Ajxmbyieabeu Application Types Injection Moulding

Year of construction: 2024, condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) Gbedpfjua D Alsx Aabeu removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system.

Condition: excellent (used), Year of construction: 2020, operating hours: 759 h, Edgebander Akron 1130 J Year of manufacture: 2020, recently serviced - 7.1 kW, 7 bar - Edge thickness: max. 5 mm - Panel thickness: max. 50 mm - Coil material thickness: max. 3 mm - Workpiece length: min. 150 mm; Workpiece width: min. 85 mm - Feed speed: max. 9 m/min - Glue system: Granulate, lower glue pot; BIESSE glue system SP 01, quick-change glue pot - Strip magazine, spray unit - With BIESSE jointing unit RT 01 - Preheating zone, end trimming unit: 1 motor, BIESSE end trimming unit IT 01 - Flush/radius/chamfer units: 1 BIESSE fine milling unit RF 01 - Corner rounding unit: 1 motor, BIESSE corner rounding unit AR 01 - Scraper unit: profile scraper, flat scraper - Buffing unit - Nesting package: flush/radius/chamfer units, profile scraper - Execution: left-handed machine Gbodpfxswzycne Aabeu - Machine length: 4,215 mm; Weight: 1,000 kg - Total operating hours: 759.48 h; Total processed length: 46,284 m MACHINE AVAILABLE APPROX. FROM WEEK 42/2025!!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Phone: 530 632 386 (English) Gsdpfoxly I Asx Aabebu

Condition: new, New, never used pellet making machine for sale! It can be ordered with a 6 mm or 8 mm sticker (1 piece optionally comes with the machine). Pellet production capacity up to 400-450 kg/hour depending on the raw material. Pellet diameter:3mm, 4mm, 5mm, 6 mm or 8 mm (depending on the chosen sticker). 3mm, 4mm, 5mm, 6mm sticker with roller as a set for the machine for 2000 euros. Sticker diameter: 300 mm. Adjustable pellet length: 10-30 mm. Gbsdpfxjxmhx Ee Aabsu Engine power: 22 kW. Dimensions: 1400 mm x 1000 mm x 1200 mm. Weight: 750 kg. Raw material moisture: 10-12-14%. The moisture content affects the quality of the pellets. Dph3O7 Raw material size: Saw dust: 1-3 mm, straw: 3-6 mm. The density of the granules is no more than 1250/m3. It is located locally in Budapest (EU), Hungary.

Year of construction: 1995, condition: good (used), Single-shaft shredder, waste shredder, cutting mill, auxiliary mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, -Condition: Single-shaft shredder is equipped with good blade set Gbodpfx Asxlcqtoabeu -Manufacturer: Vecoplan, side mill granulator -Type: VAZ120/105 -Feed capacity: 200-3000 kg/h -Number of sieves: 2 pieces Ø20 mm, Ø30 mm -Drive motor: 18.5 kW -Number of cutting blades: 27 pieces -Number of counter knives: 1 piece -Inlet cross-section: 1240 xy 1075 mm -Rotor width: 1075 mm -Rotor diameter: 230 mm -Number: 1 cutting mill available -Price: per piece -Dimensions: 2000/2700/H2370 mm -Weight: 2800 kg

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 Machine number: 133 Machine has been completely overhauled New Glue Jet 301 gluing system (top section, 1 mm) All units inspected All cutters re-sharpened All knives replaced - Electrical system for stepless feed, 400 V / 50 Hz, 2.2 kW - Motorized pressure bridge adjustment - Automatic chain lubrication - PPC 315 control with 15" touchscreen - ECO MODE energy-saving mode - Infeed fence 1350 mm, motorized adjustment - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 jointing cutters for trimming panel edges - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, left rotation for jointing unit 1801 / 1802 - Cutter, diamond Ø 70 x 64 x 30 mm, Z2, right rotation for jointing unit 1801 / 1802 - Edge feed 1901 fully automatic - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - Granulate supply hopper - Pressure unit 1913 MOT Godpfjwka Iijx Aabebu - Pneumatic end trimming unit 1918 (60 mm) - Multifunctional milling unit 1826 MOT4 (2 x 0.65 kW) - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm left rotation - Air Stream System cutter, diamond Ø 58 mm x 24 mm, Ø 20 mm Z = 2 R = 2.5 mm right rotation - Profiling unit 1833 MOT4 - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, left rotation with CM technology - Cutter, diamond Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4 radius R = 2.5 mm, right rotation with CM technology - Scraper unit 1929 MOT2 - HW reversible knives for scraper holder R = 2.5 mm (2 pcs. required) - Flat scraper 1964 - Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1,400 rpm) Availability: short-term Location: Flörsheim

Year of construction: 2005, condition: like new (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant With the Bexmill A BM soft to medium-hard substances are crushed gently. The Bexmill is also called basket type mill or conical mill. The mill can be charged both, continuously and discontinuously. From the feed unit the material to be crushed reaches the grinding area. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration - Homogenisation of mixtures - Disintegration of agglomerates Gjdefkgxmepfx Aabebu - After fluid beds and kilns - Finishing of granulates

Condition: used, Year of construction: 2020, Used machine Year of manufacture: 2020 Equipment and technical data: Working dimensions Workpiece thickness: 8–60 mm Workpiece width: from 70 mm Edge height: up to 8 mm Edge thickness for roll material: up to 3 mm Feed Gbjdpfsxizulsx Aabou Speed adjustable from 8 to 14 m/min, stepless regulation Gluing technology Glue system for granulate Glue pot located above the feed Interchangeable pot HOMAG QA 65 N Designed for EVA and PUR processing Quick-change function Units Jointing milling unit Pre-heating zone Pressure station, NC-controlled Front and end trimming with two motors Station for flush, radius, and bevel processing Corner rounding unit with two motors Scraper blades: profile and flat scraper Buffing unit Additional equipment and operator features Integrated spraying device Air cushion table for workpiece support PU pressure rollers Mechanical infeed barrier HOMAG powerTouch operator interface Right-hand machine version CE-compliant Dimensions: approx. 6,060 x 950 x 1,150 mm Weight: approx. 2,200 kg Availability: approx. December 2025 Location: North Rhine-Westphalia (NRW)

Year of construction: 2015, condition: refurbished (used), A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant The Bexmill A BM is a basket type mill or conical mill that can process soft to medium-hard substances. The gentle communition ensures the required particle size is obtained in one pass avoiding product damage and generating a minimum amount of fines. It can be operated both continuously and batchwise. A variety of screens are available in different shapes and opening sizes, they can be quickly exchanged without the use of tools to adapt to the desired task. Additionally the gap between the rotor and the sieve can be adjusted. Due to its conical form the Bexmill A BM can be operated in contrast to the classic Flake Crusher at higher revolutions. Through this larger throughputs and higher fineness can be achieved. The product spectrum ranges from wet to dry feed material. Applications: - Crushing of flakes - After mixer agglomeration Gedjf H Akbopfx Aabobu - Homogenisation of mixtures - Disintegration of agglomerates - After fluid beds and kilns - Finishing of granulates Motor: 4kW

Year of construction: 2002, condition: reconditioned (used), functionality: fully functional, Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or pendulum beater. Certain grinding tools can operate together with different grinding tracks (liners), sieves or a combination of both, to achieve the desired fineness. This allows the same machine to process many different products such as fibrous roots or spices to plastics, granulated chemicals or mineral products. The comminution takes place inside the grinding chamber where the rotor plate fitted with grinding tools impacts and projects the particles against the grinding track or sieve (if fitted) reducing their size. The process gas then transports the fines to the mill outlet towards the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc, the type of grinding tool and liner, air volume, feeding rate, etc. Technical details Pharma design, in stainless steel: product contacted parts AISI 316/316L Godorvil Tspfx Aabjbu gas contacted parts at least AISI 304 non contacted parts stainless steel Gas recirculation, suitable for inert N2 operation non pressure shock resistant (NPSR) TO BE CONFIRMED Scope of supply Pharmaceutical system comprising: feed material container docking station with dosing screw, rotary valve, 160 UPZ mill in tangential discharge design and installed on a mobile platform, with a 7,5kW motor isolated from the mill production area, piping, filter and discharge closing valve, heat exchanger, blower, platform with stairs, etc. TO BE CONFIRMED A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery

Year of construction: 2022, condition: new, Rental unit A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Gjdpfjh Utyrox Aabjbu Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Rental unit Hosokawa Alpine A FC 200 Flakecrusher. The Alpine AFC Flake Crusher is used to gently grind brittle and easily breakable materials in order to reduce their size. It can obtain low dust granulates thanks to its gentle crushing process controlling the maximum permissible top cut while avoiding the generation of undesired fines. It´s used for coarse milling and can reach particle sizes between 0,5 and 10 mm depending on the feed product. The AFC can be used for mixture homogenization, flakes granulation, disintegration of agglomerates, increasing bulk density and flowability of clumped materials. It´s fitted with a rotating grinding tool which can work in combination with a sieve of choice to adjust the resulting product according to specification. The sieves exchange is quite fast reducing the unit´s downtime. Suitable for different industries such as pharmaceutical, food, chemicals, etc. Material of construction: stainless steel Without wear protection Non gas tight Non Pressure Shock Resistant (NPSR) Scope: Flake Crusher, motor, controls and screens according to requirements

Year of construction: 1996, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: stainless steel for product contacted parts Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Gjdskqlf Sepfx Aabjbu Scope of supply: Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 1991, condition: refurbished (used), Used Hosokawa Alpine Zirkoplex ZPS 315 classifier mill A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery The Hosokawa Alpine Zirkoplex ZPS impact classifier mill is perfect for the fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Alpine classifier ATP. It can be used to pulverize different products and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, etc. The comminution takes place in the bottom part of the grinding chamber where the rotor plate fitted with grinding tools (hammers or pins) impacts and projects the particles against the liner in order to break them. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the griding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Thanks to the required process air volume, reduced temperature increase during grinding is to be expected compared to other granulation technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the speed of the grinding rotor or disc and the classifier wheel, air volume, feeding rate, etc. Material of construction: mild steel Without wear protection Non Pressure Shock Resistant (NPSR), non-ATEX Scope of supply: Gjdolgy U Nopfx Aabebu Hosokawa Alpine ZPS 315 mill with motors, a set of grinding tools of choice and installation table

Year of construction: 2014, condition: refurbished (used), functionality: fully functional, Fully refurbished Hosokawa Alpine AFG 140 used system by Alpine Originals. The Hosokawa Alpine AFG fluidized bed opposed classifier jet mill is perfect for the super fine grinding of different dry materials with a precise control over the particle´s top cut thanks to its integrated classifier wheel design, using the Hosokawa Alpine Turboplex classifier head ATP. This micronizer can be used to pulverize different coarse products to finer powders and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetic, etc. This grinder is able to process hard coarse products up to approx. 10 Mohs´ hardness without much wear and reaching an extremely high end-product fineness values between d97 4 to 100 microns top size (product dependent) at the lowest possible energy consumption. The comminution takes place in the bottom part of the grinding chamber where the nozzles inject compressed gas at high pressure onto the fluidized bed full of feed material and the resulting jet projects the particles against each other breaking them thus reducing their side. The comminution takes place in the center of the chamber far from the mill housing, hence resulting in extreme low wear within the grinding chamber turning this mill optimal for abrasive materials or those that require very low contamination in the final product. Within the same chamber, the air circulation brings the fines to the rotating classifier wheel where oversize grains are rejected to then return to the grinding zone for reprocessing, whereas the fine particles make it through the classification step to the next stage, normally the filter. Sometimes a cyclone is installed between the mill and filter or even a secondary air classifier or cyclone-classifier. Thanks to the great required process air volume, very limited temperature increase during grinding is to be expected compared to other granulation and crushing technologies. Adjusting the final particle size distribution can be easily done by changing different parameters, such as the compressed gas pressure, grinding nozzle diameter or its design and the classifier wheel speed, air volume, filling level and feeding rate, etc. Technical details Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert gas operation (N2) Stainless steel, with wear protection (ceramic and Vulkollan) Scope of supply Hosokawa Alpine AFG 140 system comprising: dosing, butterfly valve, jet mill, filter, butterfly valve, blower, process gas distributor, controls and supporting structure. A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant Gbodpfxor Dcizs Aabju We are also interested in buying back disused HOSOKAWA ALPINE machinery