Used Grease for sale (545)

Condition: new, Year of construction: 2025, FLAT PANEL CASE CLAMP GANNOMAT "CONCEPT 70 EASY 170" Fully equipped in standard configuration with: - Sturdy, torsion-resistant steel frame made with welded and bolted construction - Lateral pressing beam with continuous pressure surface, equipped with a 25 mm thick coated support plate Lsdpfx Aaew Sgnksnota - Counter-pressure surfaces (side pressure wall, base) are continuous, 25 mm thick coated support plates - Electromotoric adjustment of the pressing beam via precision trapezoidal threaded spindles (with increased pitch and concentric accuracy) and high-performance carriage nuts with grease reservoir - Pressing is performed by electromotor via worm gear motor (0.75 kW) - The pressing force of the pressing beam is infinitely variable and electronically set via potentiometer, regulated by frequency converter, allowing completely wear-free pressure force control - Pressing force for vertical pressing beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressing beams with fine positioning, via 3-stage selector switch: 5 / 10 / 25 mm per second - Jog mode for precise positioning of the pressing beam, e.g. for low pressing forces such as drawers, etc. - Extremely simple operation via two separate pushbuttons; two motion sequences (open/close) can be selected via controller - Freely adjustable pressing time preselection 0–30 min (switchable to seconds or hours), with individually programmable opening dimensions for both pressing beams - Re-pressing function to increase or decrease the pressing force during the pressing process - Working height/loading height: 200 mm - Working dimensions: Length min: 150 mm, max: 1300 mm Height min: 150 mm, max: 1700 mm Depth: 700 mm Electrical connection: 400 Volt, 50 Hz, 16 A Available: at short notice

Condition: used, Year of construction: 1995, pressure 100 t throat 300 mm stroke 10 - 100 mm no. of strokes 100 Hub/min ram adjustment 60 mm daylight, max. stroke above - ram adjustment above 490 mm table surface area 900 x 600 mm hole in the table 300 x 200 mm T-slots 4 Lsdpjv Rgwrjfx Aanjta T-slot - width 22 mm ram surface 440 x 235 mm tool shank hole (depth x diameter) 85 x 50 mm total power requirement 5,5 kW weight of the machine ca. 5,8 t dimensions of the machine ca. BxTxH 2,2 x 1,65 x 2,6 m - Fixed table - Breaking plate - Hand lever grease lubrication - Ratchet for ram adjustment - CE

Condition: good (used), power: 135 kW (183.55 HP), fuel type: diesel, color: green, Year of construction: 2007, operating hours: 12,287 h, Year of manufacture: 2007 Field of application: Construction Drive: Wheel Empty weight: 27.500 kg Lodpfxot Dlxko Aaneta Dimensions (LxBxH): 1110 x 275 x 330 cm Technical condition: good Serial number: 825.0.1055 Please contact Ferdinand Pater for more information Stock no. D33 Machine Brand Sennebogen Type: 825M D-series Weight: 28 Ton Serial number: 825.0.1055 Building year: 2007 Worked hours: 12287 Engine: Deutz TCD 2012 L06 2V 135kW Engine no. 10371260 Boom: K13 configuration, Boom = 7,4 m. and Stick = 5,8 m Safety check valves on boom and stick cylinders Cabin: Maxcab D270, Hydraulic Cab Riser, 2,7 m. in height. Upper carriage: Standard Sennebogen color, central greasing system Undercarriage: Mobile MP26, 4 points outrigger, 8 full rubber tires 10.00-20 Lights: Several lights on boom, stick and cabin Extra: Generator set Dimentions: LXBXH 11,10X2,75X3,30

Condition: used, power: 100 kW (135.96 HP), fuel type: diesel, color: other, Year of construction: 2017, operating hours: 12,235 h, Field of application: Construction Applicable material: Waste Empty weight: 22.900 kg Make of engine: Liebherr D834 Serial number: 097287 Delivery terms: EXW Please contact Christiaan Dekker for more information Ltedpfjw I Ex Tex Aanja Liebherr LH22 M Year: 2017 Hours: 12235 Liebherr sorting grab 4 x Stabilizer Hydraulic lift cabin Central greasing Webasto heating CE Always Liebherr serviced

Condition: used, mileage: 25,984 km, power: 118 kW (160.44 HP), first registration: 08/1990, overall weight: 9,200 kg, color: blue, axle configuration: 2 axles, gearing type: mechanical, loading space width: 2,400 mm, loading space length: 3,000 mm, loading space height: 1,600 mm, total width: 2,500 mm, total height: 2,990 mm, Equipment: all wheel drive, parking heater, tail-lift, Iveco 90-16 AW well maintained, ex-government ownership from the Technical Relief Agency. Switchable all-wheel drive 4x4 with low-range gearbox + differential locks on rear axle and center. Large Rockinger trailer coupling (ring eye) with a towing capacity of 9.2 t with continuous braking system. Double cab with 9 seats including 3-point seatbelts, driver's seat is an air-sprung seat, power steering. Good optical and technical condition: Fresh inspection carried out with brake fluid replacement, clutch fluid renewed, fuel filter and air dryer cartridge replaced, fuel system cleaned and chassis freshly greased. Both starter batteries (NATO blocks) replaced. Front wheel brakes disassembled and overhauled, 2 wheel brake cylinders (front left) replaced. Windscreen is showing blistering – will be replaced before sale. Ltedpfxjx A N T Ae Aanoa The price includes new technical inspection (HU/AU) with the current vehicle classification "Special vehicle - Civil Protection". Short-term export plates possible for transfer. A technical conversion to "Truck" including side impact and underrun protection is possible at an additional cost of €1,600. Downrating in conjunction with technical conversion to truck is possible for an additional €100. The truck has an unladen weight of approx. 6.0t. +++ Subject to error, change, and prior sale.

Condition: good (used), Year of construction: 2011, ET 6600-2 Rotary Table Wet Blasting System Process Description: Ljdpex Exkfsfx Aaneta The principle of wet blasting technology has proven itself for several decades as an extremely effective and efficient cleaning system. The ET 6600 wet blasting system is a rotary table wet blasting system based on centrifugal wheels, specifically designed to remove contaminants such as oils, greases, emulsions, rust, scale, paint, or other organic contaminants from components. The system is equipped as standard with a process chamber, two centrifugal wheels, a spray nozzle/blow-off unit, and a rotary table. This rotary table rotates the components in front of the centrifugal wheels or the spray nozzle/blow-off unit, thus enabling the processing of all areas of the components to be cleaned in a multi-stage process (blasting + washing + rinsing + drying). Workpiece Description: Various workpieces contaminated with oils, greases, emulsions, rust, scale, or other impurities Workpiece Material: Primarily metallic workpieces, but mineral or plastic workpieces are also possible Workpiece Dimensions: Min. 100 x 100 x 100 mm | Max. 1400 x 600 x 800 mm (Length x Width x Height) Other dimensions available upon request! Max. Weight: 500 kg (Optionally expandable to 2000 kg.) Processing task: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Normal processing time: Cleaning, degreasing, derusting, descaling, paint stripping, passivation Final condition: Cleaned surface without specified requirements for residual contamination and, if applicable, corrosion protection Process media: Blasting media, cleaning agents, process water purifier, and, if applicable, defoamer or passivating agent Process water treatment: Scraper conveyor – filter module or centrifuge system Manufacturer: ET Teknik Type: ET 6600-2 Operating voltage: 3x400 VAC+N+PE Frequency: 50 Hz Power: 27 kW Fuse: 63 A Control voltage: 24 VDC Year of manufacture: 2011 Dimensions: (L x W x Dimensions (H): 2700 x 2200 x 3700 mm Weight: approx. 4000 kg Find more items – new and used – in our shop! International shipping costs available upon request!

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Location: From stock, 54634 Bitburg - Available immediately - Lodpowdny Tjfx Aanjta Subject to prior sale

Condition: new, Year of construction: 2024, Fiber laser cutting machine FLV-3015-C2 12kW / VF1530-12000W Specifications - Maximum sheet size: 3000x1500mm - Positioning accuracy of the X and Y axes:: ±0.05mm/m - Repeatable positioning accuracy of the X and Y axes: ±0.03mm - Maximum speed: 120000mm/min - Maximum acceleration: 1.5G - Nominal power: 12.0kW - Energy requirements: 73.0kW - Source brand: Raycus or MAX Photonics (You can choose) Ltsdophpf Nepfx Aanoa - Feed voltage: 3x400V50Hz - International Protection Rating: IP54 Cutting thickness - Carbon steel: Recommended thickness 35.0mm, maximum thickness 35.0mm - Stainless steel: Recommended thickness 25.0mm, maximum thickness 25.0mm - Aluminum: Recommended thickness 18.0mm, maximum thickness 18.0mm - Brass: recommended thickness 18.0mm, maximum thickness 18.0mm Structure parts The machine is very stable thanks to its welded construction based on massive legs. The high speed of head movements while maintaining high precision is ensured by Japanese Fuji servo motors. ABLS - automatically replenishes grease in guides. RayTools cutting head with autofocus Optional extra - Otinus Protect to guarantee your peace of mind This product ensures protection for the source of your laser. With this service you will ensure that the continuity of your business is protected. We will secure your business so that you can complete your orders on schedule. Optional extra - Voltage stabilizer Control panel Operation of the fiber laser cutter is run by the control panel, which consists of a screen, mouse and keyboard. The computer runs Windows 10 and CypCut software. All installed software has lifetime licenses. Wireless controller included. Assistance by a specialist We are committed to staying in continuous contact with our customers; therefore, we meet this challenge by offering a time-package of hours to be used for the Otinus Professional Assistance to each machine purchased. Otinus Academy By purchasing this machine you will gain a year's access to online courses that will allow you to effortlessly train a new employee or refresh your knowledge from training! Technical consulting We have specialists who, before the purchase, will select the right machine and accessories based on technical drawings of the parts you plan to make. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: used, fuel type: diesel, color: green, Year of construction: 2015, operating hours: 11,445 h, Year of manufacture: 2015 Model year: 2015 Empty weight: 32.000 kg General condition: average Technical condition: good Visual appearance: average Price: On request Please contact Ferdinand Pater for more information Stock no. D15 Machine Brand Sennebogen Type: 830M D-series Weight: 34 Ton Serial number: 830.0.2170 Building year: 2015 Worked hours: 11.445 Engine: Cummins QSB 6.7 Ltodpot Dlwyofx Aanoa Boom: K15 configuration, Safety check valves on boom and stick cylinders Cabin: "Maxcab, Hydraulic Cab Riser, 2,7 m. in height Gantry catwalk on cabin " Upper carriage: Standard Sennebogen color, Central greasing system Undercarriage: Crawler hydraulic tele T41/380, triple shoes Lights: Several (LED) lights on boom, stick and cabin Extra: Machine is serviced and clean, ready for work

Condition: used, Year of construction: 1989, Universal Milling Machine ALCERA type 100 M Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Cone SA40 Spindle speed: from 40 to 2000 RPM Table size: 1400 x 320 mm Year of construction: 11/1989 Scale 3 axes HEIDENHAIN Centralized grease pump Feeds: auto X - Y - Z Joystick command Lubricant pump Voltage: 380 V Width: 2100 mm Ltjdpfjx Ekafjx Aansa Depth: 2400 mm Total height: 2000 mm Weight: approx 3 T

Condition: repair required (used), Year of construction: 2005, operating hours: 52,751 h, functionality: unexamined, travel distance X-axis: 975 mm, travel distance Y-axis: 9,100 mm, travel distance Z-axis: 575 mm, nominal power (apparent): 12 kVA, controller manufacturer: BWO, controller model: CNC 920, workpiece length (max.): 8,500 mm, workpiece width (max.): 450 mm, workpiece height (max.): 225 mm, rotational speed (min.): 1,000 rpm, rotational speed (max.): 20,000 rpm, overall weight: 16,600 kg, number of spindles: 1, number of slots in tool magazine: 32, input voltage: 400 V, type of input current: three-phase, continuous operating pressure: 6 bar, MAKA AP70 5-Axis Year of manufacture: 2005 Weight of gantry including unit and tool changer approx. 15,000 kg Weight of control cabinet approx. 1,600 kg Operating voltage: 400 V / 50 Hz Operating pressure: 6 bar Compressed air consumption: approx. 2,000 l/h uncompressed Control type: BWO CNC 920 Controlled axes + max. travels approx. X - 975 / Y - 9100 / Z - 575 / A - +-270° / B - +-98° Milling motor: HSK 63F / 12 kW from 12,000 rpm, speed range: 1,000 - 20,000 rpm Lubrication: Permanent grease lubrication Tool holder: HSK 63 F Tool magazine: Chain magazine with 32 positions / 160 mm Machine table: 2 clamping stations with 6 support crossheads with clamping / pneumatic clamping devices Workpiece cube dimensions: X - max. 2x 3750 mm or 1x 8500 mm / Y - max. 450 mm / Z - max. 225 mm / A - +- 270° / B - +- 98° Lodpfx Aaev Rlpysnjta The machine is currently not operational. The spindle, including the conversion kit, must be replaced with newer software (available upon request from Maka). The machine can be inspected live in 94424 Arnstorf, Germany, by appointment. All information is provided without guarantee; sales to commercial customers only. Inspection and pickup by appointment in 94424 Arnstorf, Germany.

Condition: excellent (used), We offer for sale the following Gránit-Mill 90 wood pelletizing presses, in the condition shown in the pictures, after the pelletizing plant has ceased operation. The machine is made in Hungary, our company has an excellent relationship with the manufacturer, and we can help you purchase parts. Drive and sticker handling is similar to the old CPM machines. The presses (with pine) are capable of 1.2-1.5 t/h/pc. Price: €29 900/press €49 900/ 2 presses Included in the price: pre-tank control cabinet dosing screw permanent magnet conditioner press motors pre-tank 1.1 kW feeder 1.5 kW conditioner 15 kW tablecloth 0.55 kW main engine 90 kW 3 stickers all three are made by La Meccanica barely used It has a 6 x 45 mm hole for pine 2 sets (total of 4) notched collars spare parts screws nuts breaker pin assembly aids Status: Engines and drives intact. Ltedpep T Twusfx Aansa Both machines tested. It is recommended to replace the neck bearing of the right machine. Smaller parts (such as the pellet cutter) must be replaced. There is no water supply, the place is prepared. The greasing method is manual, but central greasing can be easily installed. Summary: The machine on the left can be put into production immediately. It requires a minor service on the right side. If necessary, the machine can be tested at a pre-arranged time. Not in production, must be prepared. It is possible to check the mechanical durability and volume density of the produced pellets on site!

Condition: excellent (used), Year of construction: 2013, LAMELLAR - CASE CLAMP GANNOMAT "CONCEPT 70 ECO" Complete in standard configuration with: Case joints. - Counter-pressure surfaces (side pressure wall, base) are 40 mm thick, coated, continuous support plates - Electrically operated adjustment of both press beams via precision trapezoidal-thread spindles (with increased lead and concentricity accuracy) and high-performance running nuts with grease reservoir. - Clamping is performed electrically using two separate worm gear motors (2 x 0.75 kW) - Pressing force: 2000 daN (kg) per press beam. - The pressing force of the press beam is electronically regulated and set via frequency converter, thus torque transmission is completely wear-free. - Pressing and adjustment speed: 25 mm/sec. - Very simple operation via 6 separate push buttons; 6 movement operations can be selected via the controller. - Freely adjustable pressing time preselection with automatic opening: 0-30 min (switchable to seconds or hours). - Working height/feeding height: 300 mm - Working dimensions: Length min: 150 mm, max: 2550 mm; Height min: 150 mm, max: 1400 mm. Depth: 700 mm 1 selector switch for variable pressing force: 1000 / 1500 / 2000 daN (kg) Machine No. 380.324 400V, 3Ph, 50Hz (2.5 kVA, 16 A) Set of machine feet for working height 500 mm Lodpfxjw Tdyms Aansta Machine used: Year of construction: 2013, fully overhauled by Ganner, 6-month parts warranty Special price: ex-stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2020, operating hours: 171 h, functionality: fully functional, machine/vehicle number: 18403, total length: 1,900 mm, total width: 1,650 mm, total height: 2,155 mm, overall weight: 1,500 kg, input voltage: 380 V, type of input current: three-phase, power: 7.5 kW (10.20 HP), Equipment: CE marking, BDR 75/600 Shredder comprising: - 800-litre hot-dip galvanized hopper - 7.5 kW gear motor - 600 mm painted cutting unit - Cutting block with reinforced sealing partitions for significant quantities of liquids and grease Ledpfex Hq Acjx Aaneta - 12 mm Hardox knives with 7 special tips o With specific shaft speeds (14 and 28 rpm) - Control panel in 304 L stainless steel (with control for pre-configured feed belt/screw) - Galvanized and secured frame for pallet box 171 operating hours.

Condition: used, machine/vehicle number: W09ZKW32714A0xxxx, Year of construction: 2015, Please contact ATS Norway for more information Ljdpfjwphg Rsx Aanota Please provide reference number upon request: 20588 Specifications: Model Year: 2015 EU Approval Valid Until: 02.01.2026 (Currently prohibited from use – see description) Suspension: Air suspension Tires: See photos for condition Tipping Function: Yes Length: 995 cm Width: 255 cm Axle Distance: 131 cm / 131 cm Curb Weight: 5,520 kg Description:2015 F.A.G container trailer with tipping function. Although listed as EU-approved until 02.01.2026, the trailer is currently prohibited from use due to technical issues. According to the inspection report, the following defects have been noted: Brake drums and discs are contaminated with oil/grease, negatively affecting braking performance. Damaged shock absorber showing signs of leakage or malfunction. The trailer is sold as-is and is ready for delivery. Contact us for further details or to request the inspection report. Technical approved: Yes EU-approved until: 02.01.2026 Own weight: 5520 Total Weight: 25000 Payload: 19480 Width: 255 Length: 995 Model: 2015 F.A.G Containerkjerre – med tipp

Condition: used, mileage: 74,967 km, power: 88 kW (119.65 HP), first registration: 04/2019, fuel type: gasoline, empty load weight: 1,995 kg, maximum load weight: 415 kg, overall weight: 2,410 kg, next inspection (TÜV): 11/2025, gearing type: mechanical, emission class: euro6, loading space length: 2,400 mm, loading space width: 1,850 mm, loading space height: 2,000 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, navigation system, onboard computer, Net price € 52,500.00 plus 19% VAT We offer you customized lightweight box bodies on new or used chassis in various body lengths. The body and interior fittings are always customized to your individual requirements, from function to design. The sales body and interior fittings are NEW. Sales hatch on the right, rear running board, LED lights, reversing camera, non-slip industrial floor R11, driving license class B, 2-seater. Box body interior dimensions WDH 2400 x 1850 x 2000 mm Side flap 2185 x 1400 mm Gross vehicle weight 2,410 kg Unladen weight 1,995 kg Payload 415 kg Ltodpfx Aaot A A R Ionsa Interior fittings Left-hand side: Double sink with shelf incl. fresh and waste water tank Gas cylinder cupboard for 2 x 11 kg, pressure regulator, gas pipe and gas test certificate Underframe for table-top appliances Gas griddle plate Gas fryer Neutral element with GN drawer All appliances are interchangeable! Wall-mounted extractor hood incl. heat protection wall, speed regulator, flame protection filter, grease drain tap. Right-hand side: Serving table with stainless steel worktop Cooling attachment for 5x GN ¼ Undercounter refrigerator with 2 x glass hinged door 185 L Undercounter refrigerator with 1 x glass hinged door 118 L Further equipment: Shelf above the sales flap, folding bag shelf at the sales opening. sales opening. 1 LED panel on the ceiling and 2 LED spotlights above the sales counter. Electrical installation 380 Volt/16A switchable to 230 Volt/16A, RCD, 16 ampere fuse with acceptance, 5 double sockets, hygiene package, fire protection package. Net price € 52,500.00 plus 19% VAT

Condition: used, fuel type: diesel, Year of construction: 2020, operating hours: 3,658 h, Drive: Track Empty weight: 25.000 kg Track width: 80 cm Number of owners: 1 Please contact Kristoff Van Havere for more information - Original Doosan Longreach 15 meter - Hydraulic quick hitch CW30 - Bucket 1800mm - Piping for tilt bucket (low flow) - Grease system Groeneveld - Cab overpressure filter unit Lsdpfx Aex E Ni Esansta

Condition: good (used), Year of construction: 2019, Max. printing width 1500 mm Print repeat length (min. – max.) 400 – 850 mm Machine speed 500 m/min max Type of inks: Solvent based inks Material to be printed PP 10 um-200 µm BOPP 10 um-60 µm LDPE 20 um-200 µm CPP 20 um-70 µm HDPE 15 um-150 µm PET 12 um-50 µm OPA 15 um-50 µm Machine power supply 400V Turret unwinder TAU-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 640 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 810 mm Pneumatic dancing roller Turret rewinder TAR-N 1000 Max reel diametr shaft 1 - 1000 mm Max reel diametr shaft 2 - 510 mm ( with max reel on shaft 1) Max reel diametr with 2 alike reels on shafts 1 and 2 – 740 mm Pneumatic expansible shaft , I.D. 76 mm, 152 mm Antistatic bars ACE Blade slitting device Longitudinal blade slitting device, composed of 2 blades for side slits, complete with supports. Trim exhauster Noise-insulated trim exhaust device which consists of an electroblowing fan, Venturi pipe and trims collectio pipes with two exhausting nozzles. Edge guide OPG, electromechanical type, with single ultrasonic sensor, manually adjustable, to guide the edge of the web. Edge guide Kamberoller, electromechanical type, with single ultrasonic sensor, adjustable by motor Corona treating system Ferrarini&Benelli Reprint system, on the front or back side of the printed material Centralized manual (grease ) lubrication of CI drum bearings Hastelloy coated central drum Color unit opening: controls on external color units and internal color units Printing pressures adjustment The automatic system P2P allows to compensate the decrease of either the printing pressure and the colour density pressure, at machine speed increases Throw off( delayed impression release) Automatic, horizontal and activated by the same four motors moving the colour unit Printing units positioning Touch&Go It is a function which perfoms a sequence of “pre-defined” positions of the plate and anilox axis through the printing unit positioning system. Plate cylinders adjustment Tune&go It is an automatic tuning software which detects the best configuration for the adjustment of the plate cylinder, automatically modifying the control system according to the different types of plate. Pre-Register automatic print-to-print regiser pre-set “G” (Gearless) The term "Print-to-print register pre-set" is understood as the procedure used to position the printing plate cylinders on the press in phase one with the other as to achieve a printing register starting with a tolerance limit± 2 mm. Computer control The system is composed of an industrial computer equipped with a 19" SXGA TFT Single-touch IP65 L SVGA monitor Inking and washing system for anilox rolls and doctor blades Viscosimeter Gama G 26 Inks cooling and temperature control system with bank heat exchangers and regulation valves. Drying system Hot air gas burner with heating capacity up to approx. 150.000 Kcal/h ( BTU), composed of a burner installed inside the main air duct, complete with fan for combustion air, regulatory and safety devices. The exact heating capacity will be communicated during the completion of the machine. Ltjdpfx Aaevakdzsnja Infrared LEL monitoring system MSA Web Inpection Progress 500 Grafikontrol

Condition: new, Year of construction: 2025, Martin T 45 thickness planer with Tersa cutterblock Accessories: 7,5 KW The T45 thickness planer offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating Ltedeqlclbjpfx Aansa construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, functionality: fully functional, The workshop washer is a universal tool that should be found in every service, garage or workshop. It is an indispensable device for fast and inexpensive dirt removal. The possibility of using the washer in a closed room is a great advantage. Washing takes place in a closed circuit, using a washing liquid heated to a temperature of up to 70 °C. The product is discharged from the gun nozzle at a pressure of up to 8 bar, thus thoroughly cleaning hard-to-reach areas and heavily soiled parts of scale, grease or oil. Both the temperature and the fluid increase cleaning efficiency. It has adjustable, level feet. The washer is very suitable for the regeneration of turbochargers and the cleaning of heavily soiled parts made of steel, cast iron, aluminium and other alloys. The lid of the washer is equipped with pneumatic cylinders to increase the safety and quality of working with the washer. The washer has a two-function gun from which either air alone or air with detergent can be discharged. The washed object can be dried with compressed air. The washer is equipped with an intuitive control panel. The water temperature is adjustable. Infinitely adjustable air pressure. Pressure gauge. Separate switch for heating the washing liquid/water. Separate switch for power supply. Technical specifications: Lsdpfx Asuc Tn Aoanjta Capacity: 160 L Detergent heating: up to 70°C Liquid tray capacity: 8-14 L Operating pressure: 5-8bar Weight: 47 kg Dimensions: 770 x 600 x 1330 mm Air adjustment Pneumatic gun Illuminated cabin Ventilation We kindly inform you that the washer is for self-assembly.

Condition: used, Year of construction: 2019, New: No Field of application: Construction Serial number: 03xxxx Please contact ATS Norway for more information Please provide reference number upon request: 16463 Specifications: -2019 model - 2050 engine hours - 347 operating hours - Hc 95 Montabert hammer - 390 compressor hours - L5 Gps - Straight grinder - Rotabom Ledsvg Hvaopfx Aanjta - Winch - Central grease - 249cm machine width - 30 cm belt width - Range of 4.90m - 40cm2 drilling circle - Overcarriage can turn 360 degrees - Service history - Commuting on belts - Delivery by agreement Description: Great Stone Scout sold with few hours. Just had 1000 hours of service. Has a reach of 4.90 m and can drill approx. 40 cm2 in one space. Comes with L5 Gps and straight grinder. Delivery by agreement. Hours: 968 Width: 249

Condition: used, Year of construction: 2010, operating hours: 9,103 h, Applicable material: Asphalt Ltjdpfx Aox Eg Nyoanea Empty weight: 20.000 kg Make of engine: DEUTZ CE mark: yes Production country: DE Please contact Nedtrax B.V. for more information Volvo ABG6820 Year: 2010 Reading hours: 9103h Weight: 20.000 KG Made in germany Engine Deutz Description Screed Central greasing 2x Display 2x sensor From 2,5 till 5,0 meter + extensions 2x 0,75M (totaal of 6M) Transport belt:70% good Crawler: 70% good Augers 70% good Screed: 70% CE-Marked In good condition

Condition: new, functionality: fully functional, empty load weight: 115 kg, input voltage: 230 V, warranty duration: 24 months, temperature: 95 °C, KARCHER HG 64 HEATER TECHNICAL DATA: Model: HG 64 Manufacturer: KARCHER Catalog number: 1.030-510.0 Type: Hot water generator Country of manufacture: Germany Series: Professional Condition: NEW Power supply type (Ph/V/Hz): 1 / 230 / 50 Connected load (kW): 0.3 Inlet temperature (max): 80°C Minimum inlet volume: 400 l/h Water pumping capacity (l/h): 400-1300 Safety valve operating pressure (max): 220 bar Hot water operating temperature (max): 95°C Burner power: 64 kW Fuel oil consumption (max): 5.9 kg/h Fuel tank: 20 L Fuel type: EL heating oil or diesel Operating weight: 115 kg Dimensions (L x W x H) (mm): 880 x 680 x 860 Ltodpfoxykwwox Aansa ADVANTAGES OF THE KARCHER HG 64: Robust and durable device - High-performance burner manufactured using "Made in Germany" technology. Proven Kärcher safety technology guarantees protection for the device and user. Increased cleaning performance thanks to the use of hot water - Shorter cleaning times and lower labor costs. More effective removal of oils, fats, and grease. Effective germ removal and protection of delicate surfaces. Exceptionally easy maintenance - Easy access to all parts requiring service and maintenance. Integrated fuel filter and removable fuel tank for cleaning. KARCHER HG 64 KIT EQUIPMENT: Karcher Classic gun – M22 thread Karcher 1050 mm spray lance 10 m hose – DN8 – 250 bar – 100°C – M22/M22 Connecting hose (high pressure washer – water heater): 3 m – DN8 – 315 bar – 60°C

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: KR210 R3100 ultra KRC4, overall weight: 1,154 kg, load capacity: 210 kg, arm reach: 3,095 mm, controller manufacturer: KUKA, controller model: KRC4, teach pendant manufacturer: KUKA, Equipment: documentation/manual, IRS Robotics® Refurbished Industrial Robot Includes our warranty and a comprehensive 77-Point Protocol inspection conducted by our in-house robotics engineers. Brand: KUKA Model: KR210 R3100 ultra Controller: KRC4 Rated Payload: 210 kg Reach: 3095 mm General Purpose: Suitable for heavy payloads and many other applications. If you intend to use this robot for 3D applications such as 3D milling or 3D printing, we always carry out 3D measurements to ensure the robot's base accuracies. These must be within allowable tolerances to ensure that deviations are not visible in your end product. Delivery Time: By mutual agreement IRS Robotics® Refurbished: 77-Point Protocol – Fully tested on our test benches, new oil/grease, new batteries, thoroughly cleaned, repainted in your desired RAL colour. Includes Accuracy Status Measurements (repeatability, precision, backlash), especially valuable for 3D applications such as 3D milling, 3D printing, and 3D trimming. Ltedpfx Aoxxamloanja About Us: Our daily reliable business focuses on the supply of refurbished A-brand robots: ABB – KUKA – FANUC – YASKAWA. Established in 2002. We ship worldwide.

Condition: new, Year of construction: 2025, TYTAN 750 VARIO Metal Lathe (230V) with Variable Spindle Speed Control The TYTAN 750 VARIO is a versatile metal lathe designed for machining external and internal cylindrical surfaces, threading, drilling, countersinking, and reaming. With a working range of 250 x 750 mm and a DC motor (1.1 kW / 230V), it is ideally suited for small industrial workshops, repair shops, and home garages. Key Features Modern DC motor with stepless spindle speed control offers ease of use and minimizes setup time. LCD display shows real-time spindle speed, enabling precise adjustments during cutting and threading. Two spindle speed ranges: Low: 50–1125 RPM – for machining hard steels High: 100–2250 RPM – for high-speed precision turning Thread cutting capabilities: Metric threads – 18 types (0.2–3.5 mm) Imperial threads – 21 types (8–56 TPI) Capable of cutting both right- and left-hand threads Automatic longitudinal feed – 6 speed settings (0.07–0.40 mm/rev) significantly reduce machining time while maintaining accuracy during long part turning. Fully compliant with EU directives (CE) and DIN standards for safety and quality. Technical Specifications Parameter Value 3-jaw chuck 125 mm Max. turning diameter over bed 250 mm Turning diameter over cross slide 150 mm Distance between centers 750 mm Max. part length (chuck to center) 700 mm Bed width 135 mm Tool post size 65 x 65 x 20 mm Max. tool size 12 x 12 mm Spindle bore 30 mm Spindle taper MT4 Spindle speed control Stepless (L/H range) Spindle speed range (L/H) 50–1125 / 100–2250 RPM Metric threads 18 types (0.2–3.5 mm/rev) Imperial threads 21 types (8–56 TPI) Longitudinal feed rates 6 settings (0.07–0.4 mm/rev) Compound slide travel 70 mm Longitudinal slide travel 650 mm Cross slide travel 135 mm Tailstock quill diameter 30 mm Tailstock quill travel 60 mm Tailstock taper MT2 Motor power (S1/S6) 1.1 / 1.32 kW / 230 V Dimensions (L/W/H without stand) 1310 x 610 x 490 mm Dimensions (L/W/H with stand) 1350 x 560 x 1250 mm Weight (without stand) 165 kg Weight (with stand) 180 kg Standard Equipment 3-jaw chuck (125 mm) Fixed and traveling steady rests Change gears set Fixed center MT2 Fixed center MT4 Reversible chuck jaws (1 set) Grease gun Chip tray Chuck key and tool post wrench Ltjdpfx Aaew H Rauonsa Service tool kit CE-compliant safety guards