Used Grinder Other for sale (21,197)

Condition: used, machine/vehicle number: 672, mileage: 15,455 km, power: 85 kW (115.57 HP), first registration: 07/1996, fuel type: gasoline, empty load weight: 2,680 kg, overall weight: 3,000 kg, axle configuration: 4x4, color: green, gearing type: automatic, suspension: other, operation weight: 6,000 kg, Equipment: air conditioning, all wheel drive, differential lock, parking heater, trailer coupling, TÜV and AU are made new with truck registration, the Puch in a dreamlike good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition, it is the best Puch I have ever seen, almost like new! The Puch Spezial is equipped with: Air conditioning and auxiliary heating, all-wheel drive, rear differential lock, side flap ideal for hunters as a lockable gun cabinet, 2 front seats and 2 rear seats which are not registered because there is no window at the rear, high off-road capability for extremely difficult terrain. - Tire size 205R16, Mercedes automatic transmission 4 gears, total weight is 3000 kg, displacement 2296cm? , 24Volt power supply. There are several Puch Spezial in stock with an original mileage of 15000 to 25000 km. Rodpfoqx Sz Sjx Adret All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp Rjdpfx Adeqx Sz Dorjt

Condition: used, mileage: 58,943 km, power: 85 kW (115.57 HP), first registration: 04/1995, overall weight: 3,000 kg, fuel type: gasoline, color: green, axle configuration: 4x4, empty load weight: 2,849 kg, tire size: 205r16, wheelbase: 2,850 mm, gearing type: automatic, emission class: euro1, suspension: other, machine/vehicle number: 694, Equipment: all wheel drive, differential lock, truck registration, TUV and AU are newly made truck registration , The Puch is in a really good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in a super good condition , The Puch is equipped with: ZAUGG snow blade electro-hydraulic drive, snow plow can be adjusted by the driver while driving, there is a counterweight in the rear for good traction, all-wheel drive and off-road reduction, rear differential lock, 2 seat paws, high off-road capability for extreme winter use. Tire size 205R16, Mercedes automatic transmission with 4 gears, total weight 3000 kg, engine capacity 2296cm? , 24Volt power supply, There are several vehicles in stock All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 Greetings, Philipp Redpfx Ajqx Sz Iedret

Condition: used, machine/vehicle number: 1388A, mileage: 932 km, power: 179 kW (243.37 HP), first registration: 07/1986, fuel type: diesel, overall weight: 16,892 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: all wheel drive, compressor, TUV is NEW!!! So-KFZ registration, The AM General in a really good condition directly from the Army, well maintained and maintained, the body is in a great condition (vehicle from the reserve) the paint is also already, just Natogrun matt, The M931A1 is equipped with: Cable winch, all-wheel drive, 5-speed automatic transmission, transfer case with stowage and off-road gear, power steering (super smooth), 2 diesel tanks with switch for the right or left tank, raised exhaust, air brake with ABS, 3 front seats, the body is a saddle plate movable for off-road driving. The saddle plate can also be fixed for road operation by means of sliding wedges , The km indication are miles , Driving license class 2 (truck) , Tire size 14.00R20 tubeless (very good condition) , Top speed 105 km / h , Engine capacity 14011cm? , , 24Volt power supply , The M931A1 has not only Tuv, but also drives reliably :-) - A tractor unit for real off-road use ! ! ! - The AM Generalist is a real pleasure to drive and can also be insured cheaply as a youngster. - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal Redpfx Aoqx Sxlsdrot

Condition: used, machine/vehicle number: 1380A, mileage: 20,481 km, power: 179 kW (243.37 HP), first registration: 07/1984, fuel type: diesel, overall weight: 16,388 kg, axle configuration: 3 axles, color: green, gearing type: automatic, Equipment: ABS, all wheel drive, compressor, crane, trailer coupling, TUV is made NEW!!! So-KFZ registration , The AM General in a good condition directly from the Army , Well maintained and maintained, the body is in good condition (vehicle from the reserve) therefore the paint is bad and partially flaked , The M936W / W is equipped with: All-wheel drive, 5-speed automatic gearbox, transfer case with stowage and off-road gear, power steering (super smooth), air brakes with ABS, 3 front seats, the body is a 5-ton telescopic crane with an extension. The vehicle is equipped with: front thread, heavy rear thread, tractive force 12474kg, mountain support (these can be attached to the front, rear and side, 4-point support can be extended laterally, various accessories, the km are miles, driving license class 2 (truck), tire size 11.00R20 (very good condition), top speed 90 km / h, displacement 14011cm? , , 24Volt power supply , The M936 has not only Tuv, but also drives reliably :-) can also be insured cheaply as a young timerr AM Generalist drives really great makes a lot of fun . - ATTENTION ! ! the DEALER PRICE is as the vehicle is, without TUV and so on.... - All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Rjdpfx Adeqx S Adjrst

Condition: used, machine/vehicle number: 518A, overall weight: 1,700 kg, axle configuration: 1 axle, first registration: 03/1996, The floodlight trailer is in a dreamlike good condition directly from the military Well maintained and maintained, the body is in a super good condition, the Nencki is equipped with: 400 volt emergency generator 15.6 KVA with 4-stroke engine (gasoline) with electric starter, light mast with 6 steps that can be cranked up to 7465mm by hand, 6 headlights with 1000 watts each, these can be rotated 240 degrees vertically and 360 degrees horizontally from the control panel, Extendable 4-point support with which the floodlight trailer stands securely up to a wind speed of 80Km/h for higher wind speeds the mast must be braced, - Instructions in 3 languages (German, French, Italian). - The trailer has the dimensions L/W/H 4005/ 1740 / 2300 in folded driving mode, - The lighting system is overrun braked with Swiss 50mm drawbar (can also be converted to a ball head coupling, is not included in the price, - Tire size 205 R 16, other extras: support wheel for cranking and folding, tarpaulin, - 3 pieces in stock ! ! - Operating hours from 129 to 343 H - All my vehicles can be seen on my homepage. - Now you are rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but here you will find over 150 vehicles of the following types: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-Model, Mowag, DB, etc., and all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why do you want to settle for less? - Give us a call on 0049 (0)2248 le Gru?e Euer Philipp aus dem Hanfbachtal - Rodpfxsqx S Dfe Adrot

Condition: new, empty load weight: 5,500 kg, overall weight: 19,500 kg, axle configuration: 1 axle, loading space length: 11,800 mm, loading space width: 2,550 mm, loading space height: 1,100 mm, suspension: air, tire size: 215 75 17,5, Equipment: crane, 1x SAF or BPW axle Total weight: 19,500 kg Payload: 14,000 kg Empty weight: 5,500 kg Total length: 12,800mm + 1500mm Brake system: Wabco 2S-2M Electrical system: Aspöck Systems Air suspension Hydraulic rear extension in full width 2550mm and length 1500mm Semi-trailer completely galvanized / galvanized (100% galvanized / 100% galvanized) Tire size: 215/70 R 17.5 Tire brands: Pirelli, Goodyear, Fulda, Continental. 5th Wheel Height: approx. 1050mm - 1150mm (other saddle heights also possible) Hydraulic winch 8ton with remote control with pulleys 24v 4.5KW electro-hydraulic motor Steel ramp: 2 pieces Changes possible according to customer requirements Painting freely selectable / free of charge All documents COC, Tüv, etc. available for approval. Rjdpfxskqmuuj Adrot

Condition: used, color: orange, empty load weight: 430 kg, machine/vehicle number: 3658, We offer here a salt spreader from Küpper Weisser (int. number 3658). Rjdpoiv U D Hefx Adrot Type IMSSE J18018H Serial number: 130266 Year of construction 2013 Unladen weight 430 kg The salt container holds approx. 1.8 m³, the spreading width and quantity can be conveniently adjusted on the control panel during operation. The spreader was mounted on a UNIMOG and used by us, but was carefully impregnated in our workshop before the winter service season, so that hardly any corrosion has occurred. It only has one minor defect, as the attachment of the spreading plate is broken and needs to be welded, which can be done in our workshop on collection. Otherwise, the machine is in good condition and can be used at short notice.

Condition: used, fuel type: diesel, Year of construction: 2023, machine/vehicle number: EXVAC SE.10, RIVARD suction excavator EXVAC SE.10 !! IMMEDIATELY AVAILABLE. !! RIVARD industrial turbine Detachable suction hose inlet 10.5 m³ tank volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Rodpfskl N R Aex Adrjt Camera route monitoring

Condition: new, fuel type: diesel, Year of construction: 2024, machine/vehicle number: EXVAC SE.7, RIVARD suction excavator / order vehicle EXVAC SE.7 !! Delivery time: < 8 months !!! Redjkl N Rxjpfx Adrst RIVARD industrial turbine Detachable suction hose inlet 7.0 m³ container volume 4-joint boom Hydrostatic drive Filter cleaning Rear / front fall protection Camera route monitoring

Condition: excellent (used), KOLBE MWE52 MIXER GRINDER Will produce up to 1700 kg/h of product Rjdpfxjx Swxbo Adrjt

Condition: excellent (used), All stainless steel Mixer Grinder Size150 mm mince plate "56 head" Rjdpswwkk Isfx Adret Hopper capacity 200 litres Single interrupted ribbon mix arm Main motor 15 Kw - 2 speed Mix motor 1.5 Kw Safety interlocked lid In good working order

Condition: good (used), Max. Roll dia: 1000 mm Max. Roll Length: 5260 mm Rsdpfxoq Dmkws Adrst Max. Roll weight: 16 Tonnes Control: Siemens 810

Condition: used, Year of construction: 2001, functionality: fully functional, wheel diameter: 350 mm, gear diameter: 400 mm, wheel width: 50 mm, spindle speed (max.): 6,000 rpm, spindle speed (min.): 600 rpm, workpiece weight (max.): 1,020 kg, total height: 3,048 mm, total length: 3,658 mm, total width: 2,590 mm, feed length X-axis: 440 mm, feed length Y-axis: 200 mm, feed length Z-axis: 400 mm, feed rate X-axis: 10 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 10 m/min, rotational speed (min.): 600 rpm, pivoting range: 80 °, rotational speed (max.): 6,000 rpm, spindle bore: 80 mm, travel distance X-axis: 440 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 400 mm, travel speed (max.): 10,000 mm/min, workpiece diameter (max.): 400 mm, We offer this used Gleason-Pfauter P400G (400mm/800mm) CNC gear grinder machine, year of construction 2001. Type: Gear Grinders Model: P400G Brand: GLEASON PFAUTER Stock Number: GH1076 Serial # 28-727 Condition: Used Year: 2001 Description: Gleason Pfauter Model P400G 5-Axis CNC Gear Grinder Maximum Workpiece Diameter: 400 mm/800mm / 15.74”/31.48" Maximum Grindable Profile Depth: 35 mm / 1.37” Maximum Grinding Wheel Diameter: 350 mm / 13.77” Maximum Grinding Wheel Width: 50 mm / 1.96” Diameter of the Spindle Journal for Retaining: 80 mm / 3.14” Rodpfxoyuqrrj Adrjt X-Axis Travel (Radial): 440 mm / 17.32” Y-Axis Travel (Tangential): 200 mm / 7.87” Z-Axis Travel (Axial): 400 mm / 15.74” Maximum Grinding Head Pivoting Angle (+A-A): +/- 40° Maximum Table Load: 10 kN / 2,248 Lbs. Worktable Diameter: 380 mm / 14.96” Worktable Bore: 80 mm / 3.14” Tailstock Travel Distance: 650 mm / 25.59” Tailstock Locating Bore: 90 mm / 3.54” Feed and Rapid Traverse Rate (X-Axis): 10,000 mm/min / 393.70 IPM Feed and Rapid Traverse Rate (Y-Axis): 5,000 mm/min / 196.85 IPM Feed and Rapid Traverse Rate (Z-Axis): 10,000 mm/min / 393.70 IPM Tool Speed (Spindle-S): 600 to 6,000 RPM Worktable (C-Axis): 0 to 32 mm/min / 0 to 1.25 IPM Dresser Travel Distance (Z2-Axis): 200 mm / 7.87” Dresser Feed and Rapid Transverse (Z2-Axis): 5,000 mm/min / 196.85 IPM Dresser Spindle Speed (Spindle – S2): 3,000 to 6,000 RPM Maximum Dressing Wheel Diameter: 150 mm / 5.90” Approximate Machine Dimensions: 144” LR x 102” FB x 120” Height Approximate Filtration System Dimensions: 72” LR x 136” FB x 99” Height Approximate Control Cabinet Dimensions: 42” LR x 72” FB x 88” Height If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 2023, condition: new, Mill for fine grinding of flour, coffee, dried vegetables, spices and more.. grinding range from 20-120mesh. capacity 100-400kg per hour. engine speed 3400 per min. machine weight 600kg. The power needed to operate the machine is 11kW. The machine has an additional dust filtration extraction. The whole machine is made of SUS304 stainless steel. PayPal payment available!!! Rjdpfx Aok S Rpusdrst

Condition: excellent (used), OMAB/Comec curved part grinder Working width 200mm Sanding belt oscillation Pneumatic material clamping Main motor 5.5kw Feed motor 0.25kw Extraction stubs 2x100mm Dimensions of the machine 210x80x150cmH Weight 450kg Rodpfxstvfmhe Adrot

Condition: excellent (used), functionality: fully functional, Double-sided grinder Grützmacher GSP10 Working width: 200-1000 mm Working height: 230 mm Number of units: 2 Mechanical oscillation of sanding belts Pneumatic head approach Grinding motor power: 2×7.5 kW Oscillation motor power: 2×0.15 kW Sanding belt: 2500x250 mm Exhaust ports: 2x140 mm Redpfx Aexmgrqodrot

Condition: used, Mixing Grinder 130 mm hole plate diameter Throughput depending on material type, speed and cutting set Capacity: up to 3.000 kg/h Main motor power: 8.5 KW Power supply: 380 V, 50 Hz Dimensions of machine in cm: Width: 80 Length: 130 Height: 130 Hopper capacity approx 300 liters (mixing capacity depending on meat up to 200 kg) Worm, worm housing and closing are completely stainless Redshzcg Nepfx Adrst Delivery time: 10 working days after advanced payment

Condition: used, Krauss Maffei drop-out changer, height 410 mm- height 410 mm - removed from Krauss Maffei KM 200 Redporr Efnofx Adrjt - removed from running machine - fully functionalmanufacturer: Krauss Maffei Dition: gebraucht

Condition: excellent (used), HSS saw grinder SCHMIDT TEMPO model ECE45, 4 axis, diameter up to 630 mm Redpfx Asy H Egcsdrot

Condition: excellent (used), Automatic straight knife grinder REFORM model AR25 with tilting magnet mm 2500x150, 5,5 kW grinding wheel motor Rjdpfx Aey Hxmvedrst

Condition: excellent (used), Year of construction: 2009, For sale is a FELDER wide belt sanding machine FS 722 with a sanding table size of 2200 x 800 mm. The machine is in very good condition and has been serviced and inspected by our specialized staff (fully functional). Technical data: - Sanding table size: 2200 x 800 mm - Height adjustment via hand crank - Offset machine frame - Sanding belt size: 5750 x 150 mm - Extraction connection: 160 mm - 4 HP (3 kW) motor, 400 volts - Machine can be disassembled! Rsdpfx Adey Emy Isrst Shipping not possible! The machine is located in A-8561 Söding and can be inspected and picked up at any time during our opening hours. Subject to prior sale. Related terms: sander, wide belt, surface processing Reference: R-Z1314

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness Redpey Icpkofx Adrjt

Condition: good (used), Year of construction: 1988, DECKEL S11 tool grinding machine Rsdpfx Aer Elwkodrst - good condition - Scope of offer according to photos - EXW CH-4528 Zuchwil Technical data Clamping surface of the tool slide: 500 x 180mm Max. Tool diameter between the tips: 130mm Max. Tool diameter with flying clamping in the universal dividing head: 620mm Max. Tool lengths between centers: 270mm T-slot machine stand: 12mm T-slot grinding head, tool slide and accessories: 8mm Sanding stroke: 190mm Sanding stroke for twist sanding: 190mm Cross adjustment of tool slide: 100mm Vertical adjustment of sanding head: 325mm Longitudinal adjustment of grinding spindle: 5mm Tool carrier: 220mm Grinding head support: 800mm Universal dividing head on tool slide: 330mm Sanding head support: 360 degrees Sanding head: 360 degrees Tool carrier: 360 degrees Three-phase drive motor: 1.1KW at 2800 rpm Spindle speeds: Infinitely variable 2000 to 12000 rpm Max. Grinding wheel diameter: 125mm Max. Cutting wheel diameter: 200mm Weight: approx. 800 kg Dimensions: 800 x 1100 x 1760mm Space requirement: 2.5 x 2.3 m No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: good (used), Year of construction: 1997, Rollomatic CNC 600 X Tool Grinding Machine TECHNICAL DATA Rodpfxswf Nn Ie Adrjt X-axis: 228 mm Y-axis: 177 mm Z-axis: 52 mm A-axis: -15 to 90° B-axis: -110 to 40° C-axis: 360° Resolution: 0.0001 mm Rapid traverse: 12 m/min Grinding spindle angle: 105° Power: 4.1 kW Speed: 2000 – 7200 rpm Max. grinding wheel diameter: 150 mm Dimensions: 2060 x 2032 x 1880 mm Weight: 3500 kg SCOPE OF OFFER Among other things: (list not exhaustive): Rollomatic CNC tool grinding machine, year of manufacture: 1997 Rollomatic Pick and Place Robot Exact scope of supply as per photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information provided.