Used Gto 46 for sale (3,268)

Condition: good (used), axle configuration: 1 axle, first registration: 01/2027, loading space length: 5,850 mm, loading space width: 2,220 mm, loading space height: 2,400 mm, total length: 6,130 mm, total width: 2,320 mm, total height: 3,600 mm, suspension: air, tire size: 225/75R16, color: other, Year of construction: 2027, Equipment: tail-lift, = Additional options and accessories = - Tail lift = Notes = Number of axles: 1, Twin tires, Chassis type: Full chassis, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 1500 kg, Tail lift manufacturer: Dhollandia, Tail lift material: Steel and aluminum, Tail lift size: 225x180 = Further information = General information Hjdpfx Afezyydtotjfl Cab: Day cab License plate: OP-69-PR Powertrain Fuel type: Diesel Transmission Gearbox: Manual Axle configuration Tire size: 225/75R16 Brakes: Drum brakes Suspension: Air suspension Axle 1: Twin tires; Tire tread depth left inner: 9 mm; Tire tread depth left outer: 9 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 3 mm Functional Tail lift: Dhollandia, Rear door, 1500 kg Height of loading platform: 107 cm Environment Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none

Condition: excellent (used), Year of construction: 2013, S016958 PROD. KAESER TYPE TH371 Hfjdpfx Afjzwc U Njtel S/N 1003 YEAR 2013 POWER (kW) 4.3 CAPACITY (m3/min) 32 PRESSURE (bar) 16 HOURS (RUNNING/TOTAL) XXXXX FREQUENCY CONVERTER XXXXX BUILT-IN DRYER R404a 14kg EXCHANGER COOLED (AIR/WATER) ON THE TANK DOCUMENTS CONNECTION NEW/USED USED

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 28,000 kg, Year of construction: 2016, operating hours: 9,785 h, machine/vehicle number: CAT0323FKKBY00193, Equipment: cabin, Caterpillar 323FL, 2016, 9,785 h, Offset boom, Coupler + 3 buckets, Tracks 600 mm, Camera, 122 kW Hsdpfx Afovvv Austofl

Condition: good (used), turning diameter over cross slide: 350 mm, spindle bore: 50 mm, turning diameter: 600 mm, center height: 1,000 mm, Behringer lathe with a wide range of accessories. Hfsdpfxezg Ayws Aftjl

Condition: good (used), Year of construction: 2006, functionality: fully functional, 6 x vertical feeders 2 x horizontal feeders 2 x bypass feeders Stitching station Trimmer Cross stacker CHA. FJ.DKSA-0000058, year 2006 Hfedpfexbpk Eox Aftel

Condition: used, Year of construction: 2017, functionality: fully functional, operating hours: 21,809 h, type of input current: three-phase, suction capacity: 20,000 m³/h, filter area: 222 m², total height: 3,700 mm, total length: 1,800 mm, total width: 2,100 mm, overall weight: 1,600 kg, Novus AirTower FT0120018 EC filter ventilation tower – 20,000 m3/h Industrial filter ventilation for welding halls – numerous technological processes in production facilities, mainly involving metalworking. Very low energy consumption due to the use of innovative fans. Instead of a standard fan, an EC fan is used, providing SIGNIFICANT savings by minimizing electricity consumption. The EC fan with a built-in frequency converter also allows for control of the fan speed / energy consumption / device performance within a working range of 60%, 80%, and 100%. Air is drawn in from the top and discharged downwards without creating drafts – directly to the work areas. Hsdsxxalnspfx Aftefl Layered filter ventilation principle; the device does not require the installation of pipelines. Patron-type filter cartridges – self-cleaning using compressed air pulses during operation. Filter cleaning using pressure difference – no loss of compressed air. Layered ventilation principle: contaminated air is drawn in from the top, filtered, and then released at floor level as clean, breathable air without generating drafts, at a speed below 1.2 m/s. Precisely where employees breathe it in. And this is within a wide range of 270 degrees. At the same time, the Airtower operates according to the layered ventilation principle, recommended by trade unions and considered the best type of air circulation. Year of manufacture: 2017 Total operating hours: 21,809 Parameters: - 4 EC fans with a power of 3.9 kW each - Airflow 20,000 m3/h - Filtration area 222 m2 - 6 patron-type filter cartridges - Fine final filter - Fireproof package - EC Blue ENERGY PACKAGE - Hall dust sensor – dust sensor with signaling (LEDs) that transmits dust level information to the Airtower for device power regulation. Energy savings depending on the amount of dust present in the hall at any given time. Very quiet operation Stock number: 1066

Condition: good (used), Workpiece width: 1,200 mm Workpiece height: 500 mm Drill diameter: 8 - 40 mm Number of drilling spindles: 3 pcs. Spindle speed: 150 - 1,100 rpm Tool changer: 15 pcs Saw blade diameter: 1,430 mm Cutting speed: 8 - 30 m/min Total power requirement: 43 kW Machine weight approx.: 20 t Space requirement approx.: m Additional information Working range Angle steel: 80 × 65 × 10 mm to 250 × 250 × 28 mm U-steel: 80 × 45 mm to 400 × 110 mm Double-T beams: 80 × 46 mm to 600 × 220 mm Wide flange beams: 100 × 100 mm to 1,008 × 302 mm Special wide flange beams / welded T-beams: up to 1,200 × 500 mm Workpiece data Workpiece width max.: 1,200 mm Workpiece height max.: 500 mm Drilling unit Number of drilling spindles: 3 (1 vertical, 2 horizontal) Drill diameter: 8 - 40 mm Spindle speed: 150 - 1,100 rpm Drilling spindle feed: 0 - 500 mm/min Rapid traverse: 3,850 mm/min Rapid retract: 8,000 mm/min Positioning speed: 15,000 mm/min Automatic tool changer: 15 tool positions (3 × 5) Clamping system Horizontal clamping force: 25,000 N Vertical clamping force: 4 × 10,000 N Saw unit Saw blade diameter: 1,430 mm Saw blade type: HSS segment saw blade Saw blade dimension: 100 × 4 × 30 × 250 mm Cutting width: 9.5 mm Cutting speed: 8 - 30 m/min Saw feed: 0 - 400 mm/min Rapid retract: 2,000 mm/min Hjdpfxsz Airls Aftefl Drives Drilling drives: 3 × 11.0 kW Saw motor: 18.5 kW Positioning drives: 3 × 1.5 kW Hydraulic unit: 5.5 kW Hydraulic saw: 3.0 kW Vertical clamping cylinder: 1.5 kW Swiveling drive: 0.25 kW Hydraulic oil heater (option): 3.0 kW Total power Total connected power of drilling unit: 43.0 kW Installed total power of the complete drilling and sawing system: approx. 66 kW (incl. saw motor and auxiliary drives) Compressed air Compressed air connection: 6 - 8 bar Air consumption: 1,000 l/min Dimensions Drilling unit Dimensions (L × W × H): 6,650 × 1,300 × 3,730 mm Working height: 640 mm Weight: approx. 8,500 kg Saw Dimensions (L × W × H): 4,500 × 1,500 × 3,200 mm Working height: 640 mm Weight: approx. 10,980 kg Total weight approx. 19,500 kg (without accessories) Electrical data Operating voltage: 400 V / 50 Hz Control voltage: 24 V

Condition: used, mileage: 1,100 km, power: 110 kW (149.56 HP), first registration: 07/2026, fuel type: diesel, overall weight: 2,800 kg, axle configuration: 2 axles, fuel: diesel, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 3, total width: 2,147 mm, total height: 1,984 mm, Equipment: airbag, immobilizer system, parking sensors, seat heater, sliding door, soot filter, traction control, KA2 Rear view camera "Rear View", 6XN Exterior mirrors, electrically adjustable and heated, 8G1 Driver assistance system: automatic headlight control (Light Assist), 7Y3 Driver assistance system: lane keeping assistant (Lane Assist), TEL3 Mobile phone interface with wireless charging function, 6Q3 Gearshift lever for automatic transmission on the steering wheel, 7M3 Door sill trims at the front, plastic, black, 8FA Without 2nd battery, D6R 2.0L 4-cylinder turbo diesel engine 110 kW / 150 hp with 360 Nm, EL8 5G modem, FC Palladium Super Dark Black / Palladium Super Dark Palladium Grey / Black / striped fabric and "Life" fabric, GV1 Preparation for alcohol-sensitive immobilizer, KB0 Without separation relay for 2nd battery, Q2X Driver's seat package 46, single seat in "striped fabric" with double co-driver's seat and seat heating, X10 Regional sales program, Central Europe, YAA Control of seat package (order only to change the standard seat package), QI8 Service interval 40,000 km or 2 years (variable), QJ1 Exterior package, textured trim, radiator grille in Clear White, 2QA "Transporter" lettering on the rear, black decorative strip, textured, 9IN Mobile phone interface with inductive charging function, U9D 7x USB in the driver's cab, 7X1 Parking aid in the front and rear, 3MJ Rubber floor in the driver's cab, 5BD Wooden floor (2-piece) with 3 airline rails (transverse), 4A3 Seat heating for seats in the driver's cab, adjustable separately, 3L3 6-way adjustable driver's seat with height adjustment, 33B Double co-driver's seat with storage compartment (only for panel van) and folding table, 7P5 2-way lumbar support for the driver's seat, manually adjustable, 4S4 Armrests for the driver's seat, 5ZS 4-way adjustable headrests, height and tilt adjustable. Hfjdpoz A Drwsfx Aftsl We are available by telephone Monday to Friday until 8:00 PM and Saturdays until 4:00 PM!! Furthermore:!! Leasing/financing and trade-in possible!! !! !! - Errors and prior sale are reserved!! - All information without guarantee ... more on our homepage.

Condition: excellent (used), Year of construction: 2024, operating hours: 4,000 h, functionality: fully functional, machine/vehicle number: 111549, air demand: 6 m³/h, operating pressure: 6 bar, total width: 1,300 mm, type of input current: three-phase, inner dimension length: 8,000 mm, I am pleased to present a custom-built Rosler 100-4 HD machine. This machine is used for shot blasting steel parts, where a high surface roughness is required. - Year of manufacture: 2024 - Machine operating time: 4000 hours - Mesh conveyor belt made of manganese steel, 1000 mm wide - Adjustable speed of the conveyor belt - 4 turbines, power 11 kW, Rutten Gamma 330 HD model - Continuously variable turbine speed control - Automatic part detection - Automatic abrasive flow control - Automatic abrasive filling Hfsdpfx Aowvgbgoftjl - Automatic part blow-off - Rosler BF 40/40 dust collection system - The machine is additionally equipped with a wet dust collector, which enables the shot blasting of aluminum parts (additional installation fee applies). - Hot Spot chamber made of manganese steel and tool steel - The machine allows operation with media of the highest hardness (GH, sharp-edged) or cut shot, making it an ideal solution for the rubber industry, where high surface roughness is needed during the rubber vulcanization process. - Turbine blades made of cemented carbide guarantee 30,000 hours of operation. - Turbine housings made of cemented carbide provide even greater protection against wear and tear on the machine body.

Condition: used, mileage: 7,00,000 km, power: 350 kW (475.87 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 11,315 kg, maximum load weight: 14,685 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, Lg. House, 1x comfort seat, 1x couch, heated seats, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, auxiliary heating, air horn, ABS (anti-lock braking system), traction control system (ASR), retarder, power take-off, differential lock, fog lights, work lights, storage box, air suspension, air+light trailer hitch, aluminum tank, aluminum rims, last axle liftable, last axle hydr. steered, U-protection, aluminum side bumpers, roof hatch, green environmental badge Wheelbase: 4600 mm Body: 20t Meiller RK 20.65 roll-off system for containers up to 6.5m (year of manufacture: 2008) 2008) Front axle air-suspended, 8t front axle, rear axle disc wheel 440 hypoid 13t, 7.5t trailing axle unloadable/liftable/steered, electronic brake system with ABS and ASR, disc brakes on front and rear axle, condensation water monitoring for compressed air system, secondary water retarder, additional stabilizer on rear/trailing axle, Aluminum front underride guard, Smoking package, Comfort bed below, Residual heat utilization, Auxiliary hot water heater, PSM, Communication interface (KOM), Start-off aid, ClassicSpace, Comfort locking system, Economy drive program, Mercedes PowerShift 3, Pre-fitting for toll collection, LED daytime running lights, Cornering lights, ESP, Tank capacity: 500l, refrigerator, power take-off MB 131-2c pump. The vehicle has a total mileage of approx. 700,000KM! The vehicle has engine damage and only serves as a spare parts donor! Some parts are already missing! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! Hodpfx Afjvhi S Totsfl - .

Year of construction: 2012, operating hours: 2,645 h, condition: used, Power internal combustion engine: 46 HP (34 kW) GVW: 3.820 kg Make of engine: ISUZU Lifting capacity: 2.500 kg Hfjdpfsy R T H Eex Aftjl CE mark: yes Serial number: R9984 Machines for Sale! Browse our website for a variety of machines ready for purchase. We have more options than what you see online, so feel free to call or email us anytime. All our machines are fully maintained and checked for reliability. Need pictures? Just contact us, and we'll share them promptly.   We're here to assist you in Dutch, English, French, German, Spanish and Russian. Discover our wide range of reliable machines. 

Condition: like new (used), Year of construction: 2017, functionality: fully functional, Manufacturer KELCH GmbH, Weinstadt, Germany Type / Model KENOVA set line V646M Year of manufacture 2017 Design Vertical tool pre-setting and measuring device Measuring range Diameter X up to approx. Ø 430 mm (V6 series) Extended X range up to approx. -100 mm (V6 series) Measuring length Z, depending on V6 version, approx. 800 mm Repeatability of camera approx. ± 2 μm (series specification) Measuring system Optical camera system / CCD camera Optics Telecentric lens; features depend on version Tool holder Modular precision spindle; adapter depends on features Possible holders e.g. SK, HSK, PSC, VDI with matching inserts Positioning Coarse and fine positioning in X/Z, depending on features Operation A KELCH pico control terminal can be seen in the photo Mains voltage 90-260 V Mains frequency Hfjdpfezw Ef Rex Aftsl 50-60 Hz Maximum power consumption 1000 VA Marking CE / Made in Germany

Condition: good (used), Year of construction: 2010, operating hours: 72,154 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 25 mm, displacement volume: 54 cm³, total length: 3,800 mm, total width: 1,850 mm, total height: 2,150 mm, overall weight: 5,000 kg, Equipment: documentation/manual, ARBURG Allrounder 900 T 800-150 Stock no.: 503576 Manufacturer: ARBURG Model: Allrounder 900 T 800-150 Control system: Year of manufacture: 2010 Operating hours: 72,154 h Technical Data – Clamping Unit Clamping force: 800 kN Tie bar spacing (h x v): 900 x 900 mm Min. mould height: 250 mm Max. daylight between platens: 550 mm Opening stroke: 300 mm Rotary table diameter: 900 mm Ejector stroke: 150 mm Ejector force: 46 kN Hfjdpsz Azdtjfx Aftol Centric location, moving platen (D): 90 mm Centric location, fixed platen (D): 90 mm Technical Data – Injection Unit Screw diameter: 25 mm Shot volume: 54 ccm Injection pressure: 2,500 bar Screw length: 24 l/d Screw torque: 210 N Plasticising rate: 49 g/s PS Free-flow injection rate: 80 g/s PS Dimensions & Weight Machine dimensions (LxWxH): 3.8m x 1.85m x 2.15m Total weight: 5,000 kg Equipment Display text in German 1x air valve Machine with rotary table Machine with water manifold Levelling elements BDE interface

Condition: excellent (used), Year of construction: 2014, S016896 Hfodpfx Afezi Dbhetjl PROD. ATLAS COPCO TYPE GA75VSDFF S/N API668061 YEAR 2014 POWER (kW) 75 CAPACITY (m3/min) 15.09 DISCHARGE PRESSURE (bar) 12.75 HOURS (SERVICE/TOTAL) FREQUENCY CONVERTER yes BUILT-IN DRYER yes, R410a 1.1kg HEAT EXCHANGER no COOLED BY (AIR/WATER) air ON TANK no DOCUMENTS no NEW/USED USED

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, For sale is a complete industrial RITTAL TopTherm switchgear cooling system, consisting of a central RITTAL chiller/cooling unit and a total of 16 RITTAL air/water heat exchangers. The system comes from an industrial production facility and was used for the central cooling of several switchgear cabinets. The entire system was in trouble-free operation until it was professionally dismantled. RITTAL Chiller / Cooling Unit Manufacturer: RITTAL GmbH & Co. KG Type: SK 3336.459 Design: KRAE0200TT00V480EF Year of manufacture: 2020 Date of manufacture: 07/15/2020 Serial number: 2020K000069533 Technical data: Nominal cooling capacity: 24,400 W / 24.4 kW Operating voltage: 3 × 400 V / 50 Hz Max. current: 22.3 A Starting current: 111.7 A Max. power consumption: 11,330 W Hfedpfx Afozwaa Astel Refrigerant: R410A Tank volume: 78 liters Temperature range: -20 to +43 °C Noise level: 76 dB(A) Protection class: IP44 Weight: 326 kg 16 RITTAL Air/Water Heat Exchangers The scope of delivery includes a total of: 10 × RITTAL TopTherm SK 3210.500 Air/Water Heat Exchanger Useful cooling capacity: 4.0 kW Operating voltage: 230 V Cooling medium: Water Protection class: IP55 6 × RITTAL TopTherm SK 3209.500 Air/Water Heat Exchanger Useful cooling capacity: 2.5 kW Operating voltage: 230 V Water flow rate: 400 l/h Cooling medium: Water Protection class: IP55 Weight: approx. 23.5 kg The heat exchangers were mounted on the respective switchgear cabinets and supplied with cooling water via the central RITTAL cooling unit. Scope of delivery: 1 × RITTAL TopTherm Chiller SK 3336.459, 24.4 kW 10 × RITTAL Air/Water Heat Exchanger SK 3210.500 6 × RITTAL Air/Water Heat Exchanger SK 3209.500 Existing cooling water pipes and hoses Existing connection fittings and connecting parts Other existing installation and connection accessories as shown in the pictures This offers a largely complete central switchgear cooling system with a total of 16 cooling points. The components come from a professionally installed industrial system, manufactured in 2020. The condition is used; minor optical signs of wear or damage to individual plastic covers can be seen in the pictures. Inspection is possible by appointment. The complete system is preferred for sale. Price: €14,900 net, negotiable Subject to prior sale and errors in the technical data. Technical data according to nameplates and available manufacturer documents.

Condition: good (used), mileage: 9,99,999 km, power: 345 kW (469.07 HP), first registration: 04/2010, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 6x2, wheelbase: 6,270 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2010, Equipment: air conditioning, central locking, cruise control, electric window regulation, onboard computer, parking heater, soot filter, spoiler, = Additional Options and Accessories = - Cabin - Particle filter - Sun visor - Auxiliary heater = Notes = Volvo FH460 Berdex 3-deck livestock carrier - Loadlift - Lifting roof - Steering axle - Manual gearbox Year of manufacture: 29-4-2010 Mileage: 1,104,784 km VIN: YV2AG20C3AB558376 License plate: BX-NN-03 APK/TÜV (technical inspection): valid until 27-2-2027 3-deck Berdex Lifting roof Folding floors Loadlift Manual gearbox Steering axle = Further Information = Hfodpfjy Uxqwsx Aftsl Technical Information Number of cylinders: 6 Engine displacement: 12,780 cc Axle Configuration Suspension: Air suspension Front axle: Tire size: 385/55R22.5; Max. axle load: 8000 kg; Tire tread depth left: 70%; Tire tread depth right: 70% Rear axle 1: Tire size: 315/70R22.5; Dual tires; Max. axle load: 11500 kg; Tire tread depth inner left: 50%; Tire tread depth outer left: 50%; Tire tread depth inner right: 50%; Tire tread depth outer right: 50% Rear axle 2: Tire size: 385/55R22.5; Lift axle; Max. axle load: 7500 kg; Steerable; Tire tread depth left: 40%; Tire tread depth right: 40% Weights Unladen weight: 13,530 kg Payload: 13,470 kg GVWR: 27,000 kg Maintenance, History and Condition APK (technical inspection): valid until 02.2027 Technical condition: good Optical condition: good Identification License plate: BX-NN-03

Condition: used, mileage: 5,42,844 km, power: 95 kW (129.16 HP), first registration: 06/2012, fuel type: diesel, next inspection (TÜV): 07/2028, color: white, gearing type: automatic, emission class: euro5, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €6,400 net * Mercedes-Benz Sprinter 313 Cdi L2H2 Flex-i-Trans, 9 seats, wheelchair lift, cruise control, air conditioning, Euro 5 * Seats (8+1) * Flex-i-Trans * Automatic transmission * Radio/CD player * Driver airbag * USB port * Cruise control * Electric windows Hodezky Efjpfx Aftefl * Central locking * Automatic climate control * Start/Stop system * Tire pressure monitoring system * ABS * ESP * Wheelchair lift, 400 kg capacity * Wheelbase 367 cm * Unladen weight 2584 kg * Payload 916 kg * Permissible total weight 3500 kg * Passenger car registration * Vehicle No. 46 OPENING HOURS Monday - Friday from 9:00 AM to 5:00 PM (by appointment...) CONTACT INFORMATION Telephone: WhatsApp E-mail: Transit and customs plates (export number) available from us. Errors, typos and prior sale excepted. Technical specifications and equipment features must be checked separately. The condition according to the contract is only what is inspected on site at the time of purchase and confirmed in writing. Please make an appointment...

Condition: good (used), DREISTERN P3.100.40/3 Profiling Line – 44 driven stations with flying shear Short title for platforms with character limitations: DREISTERN P3.100 Profiling Line, 44 Stations + Shear Platform Data * Machine Type: Profiling Line / Roll Forming Line * Manufacturer: DREISTERN-WERK * Model: P3.100.40/3 * Year of Manufacture: 2002 * Factory Number: 02 098 * Order Number: 38933-46 * Condition: Used, disassembled * Control System: Not available For sale is a comprehensively equipped DREISTERN profiling line, type P3.100.40/3, with 48 stations, 44 of which are driven, as well as an inline shear (“flying shear”). The line features quick-change plates, mechanical quick clamps, and a coolant piping system. Due to the large number of profiling stations, it is particularly suitable as a mechanical base for demanding, customer-specific roll forming applications. An expansion with additional stations is structurally possible. According to the previous operator, the line operated flawlessly until it was disassembled at the customer's plant. The control system is not available and is not included in the scope of supply. Recommissioning or control system adaptation by the buyer is therefore necessary. Machine Bed and Drive * Production direction: from right to left * Center distance: 330 mm * 48 stations total * 44 stations driven, with 44 gearboxes * Quick-change plates * Mechanical quick clamps * Coolant piping system * 1 × Baumüller DC motor, 42 kW * 1 × Baumüller DC motor, 15 kW Profiling Frames * Number included in scope of supply: 44 pieces * Tool width per frame: 275 mm * Working shaft diameter: 50 mm * Working shaft connection: 30 mm with keyway * Lower shaft mostly fixed; 6 frames with adjustable lower shaft * Axial adjustment * Adjustment range lower to upper shaft: 80–170 mm Gearboxes * Worm gear ratio: 1:21 * Lower/upper shaft ratio: 1:1 Inline Shear * Travel path: 1,900 mm * Profile rail guidance * Ball screw drive * Bosch servo motor Hodpszzyd Aefx Aftofl * Valve block with punching unit * Folding table length: 3,000 mm * Emergency stop Scope of Supply * Machine bed with gearbox support * Infeed table * Pneumatic measuring wheel unit * Straightening device * Belt filter unit, 800 liters * Hydraulic unit for the shear * 44 gearboxes * 44 profiling frames * 2 Baumüller DC motors * 66 universal joints * Inline shear according to the above description

Condition: repair required (used), mileage: 7,55,367 km, power: 338 kW (459.55 HP), first registration: 03/2015, fuel type: diesel, empty load weight: 15,060 kg, overall weight: 26,000 kg, tire size: 385/55 R22,5 - 315/70 R22,5, axle configuration: 3 axles, wheelbase: 5,100 mm, energy efficiency: A, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, loading space volume: 16 m³, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,000 mm, Equipment: ABS, AdBlue, EBS, additional headlights, cruise control, differential lock, navigation system, parking heater, retarder, traction control, trailer coupling, Urea tank (AdBlue) Engine displacement: 11,120 cc 40 mm trailer coupling Hydraulics (auxiliary drive) Low noise Alloy wheels Euro 6 A Payload: 10,940 kg Long-haul driver's cab Automatic climate control Hodpfx Afjzgfx Ajtefl Air suspension Trailing axle Sun visor Light bar Rotating beacons Air horns 2 bunks WARNING: NOT ROADWORTHY!!!! Errors and omissions excepted.

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Hodpfjzq A Ezjx Aftofl Designed for cleaning dust with special properties, particularly explosive dusts. High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: excellent (used), mileage: 4,60,073 km, power: 117 kW (159.08 HP), first registration: 06/2009, fuel type: diesel, tire size: 225/75 R17.5, axle configuration: 4x2, wheelbase: 3,900 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, total length: 7,810 mm, total width: 2,470 mm, permissible axle load (axle 1): 3,600 kg, permissible axle load (axle 2): 5,000 kg, loading space length: 5,850 mm, loading space width: 2,370 mm, loading space height: 2,300 mm, Year of construction: 2009, Equipment: ABS, air conditioning, cruise control, electric window regulation, fog lights, = Additional Options and Accessories = - (Roof) spoiler - Rear doors - Radio/CD player - Side mirrors with electric adjustment - Side doors - Sun visor - Digital speedometer Hfsdjzkh U Ispfx Aftjl = Additional Information = General Information Cab: simple License plate: BX-BH-46 Technical Information Number of cylinders: 4 Engine displacement: 4,462 cc Axle Configuration Tire size: 225/75 R17.5 Brakes: Disc brakes Front axle: Max. axle load: 3600 kg; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle: Max. axle load: 5000 kg; Tire tread depth left: 40%; Tire tread depth right: 40%; Suspension: Air suspension Weights Unladen weight: 5,740 kg Payload: 2,560 kg GVWR: 8,300 kg Condition Technical condition: very good Optical condition: very good Damage: none

Condition: excellent (used), Altendorf F45 ElmoDrive panel saw Extensive equipment 320cm sliding table, Two-way tilting (+46 to -46 degrees) with motorized adjustment, Hedpfszxc D Hjx Aftofl Motorized up-and-down adjustment of the saw blade, Right-hand rip fence with motorized adjustment up to 1370mm, 2-axis scoring saw with electric adjustment 5.5KW main motor, speed controlled by a frequency inverter, Max. blade diameter 450mm, Electronic display on the rip fence and sliding table, DIGIT-L Year of manufacture: 2023 Very good condition, barely differs from a new machine.

Year of construction: 2012, condition: used, Empty weight: 9.250 kg Width: 18 cm Serial number: GS0000985 CP2000 Anicolor Damping Complies with the CE standard: yes Maximum sheet size: 370 × 520 mm Maximum print size: approximately 360 × 520 mm. Maximum production speed: approximately 15,000 sheets per hour. Paper thickness: approx. 0.03–0.40 mm Dimensions: Length: 5.5 meters Width: 1.85 meters Height: 1.62 meters Weight: approx. 9,250 kg Includes operator console Note: The machine was delivered with a maintenance contract Online auction of high-quality printing, finishing, bookbinding, and paper-processing machinery from a modern graphic arts production environment, including a HEIDELBERG Varimatrix 105 CS automatic die-cutting and embossing machine, a HEIDELBERG Speedmaster SM 52-5 Anicolor 5-color offset press, a BOBST BRAUSSE Bora 1050 E die-cutting machine with stripping function, 2 HEIDELBERG Stitchmaster ST450 professional brochure production lines, a HORIZON StitchLiner 6000 fully automatic saddle-stitching line, HEIDELBERG Stahl TH 66 / TH 82 and XT 94 folding machines, a MÜLLER MARTINI Bolero automated high-speed line for collating and perfect binding with PUR and hot melt, POLAR 137 XT PACE and POLAR 137 XT AT XT Plus Autotrim fully automatic cutting lines, POLAR 115 XT and 92 ED cutting machines, AGFA Avalon CTP plate setters, MÜLLER MARTINI 1571 automated collator, PALAMIDES Delta 703 bundling and strapping machines, NEOPOST DS600i inserter, the EPSON Super Color T5200 large-format printer, the TECNOMAC Evolution 76 B1 laminator, the HEIDELBERG GTO 52 with Alcolor, various HEIDELBERG sheetfed presses, stack lifts, accessories, and graphic peripherals, etc. The online auction opens Friday 14 August and closes Thursday 17 September. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Hodpfszuw Hujx Aftjfl Viewing days are on: - Thursday 3 September - Thursday 10 September - Monday 14 September Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Year of construction: 2008, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: HELIX 30, Current Status & Availability: The stretch wrapping machine is fully operational and is currently in daily use. Availability: The entire system is currently fully integrated into production and can be inspected under operating conditions after consultation. The planned dismantling/replacement must be carried out by the buyer during calendar week 46-47/2026. System Description: - Stable 4-column construction - Rotating arm with film carriage - Top sheet applicator (integrated) - Turntable for pallet rotation - Automatic pallet height detection using a photoelectric sensor - Variable adjustable number of top and bottom wraps - Variable adjustable wrapping program - Blowing unit: this unit blows air onto the beginning of the film from below and wraps it in. - Pre-stretch system P.G.S.A., see section 1.5 1.5.1 For reducing film consumption and increasing load securing - With this pre-stretch system, the tension of the film on the load can be adjusted via the adjustable dancer roll. - PLC control system Siemens S7-200 with a free-standing control cabinet - Machine operation and information texts via operator display - Triple indicator lights to display the operating states - Machine equipped with Robopac standard components - Electrical installation according to protection class IP 54 - Documentation - Machine complies with CE and EMC standards Safety light barriers at the infeed and outfeed (standard Robopac Sistemi). In accordance with the EC directives for machinery (EC Directive 89/392), the system receives a CE marking and is supplied with a declaration of conformity. - Machine equipped with European safety standards with EMC (89/336/EEC) and EU standards in excerpts EN 292, EN 294, EN 811 EN 60204 Hfedpfx Afsy Sziqotjl - Machine will be completely assembled and tested before delivery - Packaging suitable for transport by truck (machine on a wooden pallet covered with film)

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: - Quill diameter: 125 mm Hodpfxexlza Ho Aftofl - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.