Used Haas St 20 Y for sale (255)

Condition: used, Volume: 300 l Csdpfx Adex Armlsdeaa Haas food equipment 300 L D. 800 X 600 Double sided Chip shredder Mixer + turbo PCM type extraction pump Used in the food/dairy sector: butter production.

Condition: excellent (used), Year of construction: 2018, For sale Fourth axle from Haas HRT310 with 15 operating hours Cjdou Haxlepfx Addeaa Year of construction 2018 Clamping surface diameter 310 mm Max. Weight on the clamping surface (with support) 197.3 kg Maximum weight on the clamping surface (unsupported) 98.7 kg Number of T-slots in basic configuration 6 x 60° Max. Max. speed 75 °/sec Torque (continuous) 407 Nm Weight 232 kg The dividing head can be inspected by arrangement in Upper Austria. The buyer takes care of transportation. Technical data, accessories and description of the machine are non-binding

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement Caedpfex Dd T Hox Addsa X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2016, 1 used 5-axis machining center Manufacturer: Haas, Model: UMC-750, Year of manufacture: 01/2016, Cjdsxyinnjpfx Addjaa Read spindle hours: 4,960, Feed hours: 10,247 Travel X/Y/Z = 762x508x508 mm, 10,000/5,000 Bh Tool holder: SK40, 40-position tool changer, NC SRT table size: 630x500 mm, Maximum table load: 300 kg, Maximum swing diameter: 686 mm,

Year of construction: 2004, condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm Feed opening: 1500 x 750 mm / 1500 x 600 mm Wear parts new, main motor with new bearings. Chassis, hydraulic unit, complete with control cabinet and operator panel, Excellent condition, ready for operation Total weight approx. 18 t Casdpfx Aouqyr Ejddsa

Condition: used, Year of construction: 2010, x-travel 508 mm y-travel 356 mm z-travel 508 mm table dimensions 508 x 324 mm spindle tunring speed 10.000 U/min Tool cone CAT 40 spindle drive 15 kW tool magazine 24 Stationen rapid traverse 25,4 m/min feed 18,03 m/min weight 6,5 t In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Operating hours approx. 20,851 hours Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. Casdsxyafwopfx Addsa subject to prior sale

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Caedpfx Adsxva Ahedea Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.

Condition: used, HAAS VF-2 is a 3-axis machining center, engineered for precision, high accuracy and reliability. Table 914×356 mm; travels X 750 mm, Y 406 mm, Z 508 mm; table load max. 680 kg. Tool changer 20 tools, spindle nose CT40, stepless spindle up to 8100 rpm, spindle power 22.4 kW, rapid traverse 25.4 m/min; machine weight approx. 3447 kg; overall dims L2464×W2337×H2578 mm. Accessories: set of toolholders, preparation for coolant device, Renishaw probe, lamp, oil mist extractor, rinsing guns. Enables tight tolerances; typical applications: automotive, aerospace, medical, watchmaking, toolmaking. Cajdpfxoxx U Dlo Addja

Condition: ready for operation (used), Year of construction: 2017, operating hours: 4,757 h, General Data Measurements width 2794 mm Measurements depth 2235 mm Measurements height 2692 mm Machine weight 5670 kg Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 4 Movement X-Axis Movement 1016 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm Codpfx Asxvfi Toddsaa Workpiece Workpiece weight 794 kg Tools Max weight 5.4 kg Max tool diameter 76 mm Max tool length 330 mm This 4-axis HAAS VF-3SS vertical machining center was manufactured in 2017. It features a 1016 mm X-axis travel, 508 mm Y-axis travel, and 635 mm Z-axis travel. The table supports up to 794 kg, with dimensions of 1219 mm by 457 mm. It includes 24 tool pockets and achieves a maximum spindle speed of 12,000 RPM. Consider the opportunity to buy this HAAS VF-3SS vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Dehairing machine Caodpfx Aoxtpm Doddea Manufacturer: HAAS Stainless steel Engine: 2.2kW

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Cedpfxjv Tah Aj Addeaa Spindle speed 0 – 12,000rpm, Spindle taper BT40, Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 1056789, travel distance X-axis: 1,016 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 18 m/min, workpiece weight (max.): 1,500 kg, total height: 3,600 mm, total length: 2,400 mm, total width: 2,600 mm, table width: 457 mm, table length: 1,219 mm, table load: 1,500 kg, overall weight: 7,000 kg, spindle speed (max.): 10,000 rpm, coolant supply: 20 bar, number of slots in tool magazine: 24, type of input current: three-phase, coolant supply through spindle: 20 bar, tool type: SK 40, Equipment: chip conveyor, documentation/manual, lighting, This CNC machine is a Haas VF3(BHE) from 2007. It features a side-mount tool changer and a double-arm gripper, enabling automatic tool changes from 24+1 tools. Both the tool changer and spindle accept SK40 tool holders. A wired handwheel is located on the left side of the control panel. The 4th axis is pre-configured. The front and side safety viewing windows have been replaced. The coolant has been drained, and the tank has been cleaned. An additional 25-micron coolant filter protects the spindle's internal coolant system via the tool against contaminants and chips. Training materials and a manual are included, as well as a cable for communication with a computer (see photos). The machine is powered on and can be inspected and demonstrated by appointment at any time. We are happy to answer any further questions you may have about the CNC machine. Organizing transport at the buyer’s expense is possible by arrangement. Sale on behalf of a customer! Cajdpfxjx Aidhe Addea

Condition: excellent (used), CNC cycle lathe Haas TL1 (Machine from training) Year of manufacture: 2010 Spindle hours approx. 500 Swing diameter over bed: 508 mm Swing diameter over cross slide: 279 mm Turning length: 762 mm Wedge bar chuck ROTA-S 200 (Prepared for hydraulic chuck with foot pedal) Travel paths: X: 203 mm Z: 762 mm Rapid traverse X/Z: 11.4 m/min Drive power: 7.5 kW Cajdpfx Adexwtqbjdea Torque: 146 Nm Spindle bore: 58 mm The machine comes from training and was only rarely used. Therefore, the low spindle hours. Very good condition and immediately ready for use.

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,452 h, Main Drive Spindle speed range 12000 Number of axis 3 Caedpfx Adsxulbyjdsa Movement X-Axis Movement 1270 mm Y-Axis Movement 508 mm Z-Axis Movement 635 mm This 4-axis HAAS VF-4 vertical machining center was manufactured in 2017. It features a spindle speed of 12.000 RPM, a 22.4 kW spindle motor, and a table size of 1321mm x 495mm. It includes a 20-position tool changer, through-spindle coolant at 21 bar, WIPS-R probes, and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4 machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2011, Traverses X Y Z: 762 x 406 x 508, Table 914 x 356, Spindle speed 0 - 7500rpm, Spindle taper BT40, Spindle Motor 30Hp HAAS Control, 24 Station ATC, Caodpfoxwyuasx Addja Programmable Coolant nozzle, WIPS, Low Volt light, 2 axis trunnion table 160mm.

Condition: ready for operation (used), Year of construction: 2015, Control Unit Brand HAAS Main Drive Spindle speed range 15000 Caodpoxulfljfx Addja Tool taper ISO 40 Number of axis 5 Movement X-Axis Movement 508 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 5-axis HAAS DM-1 vertical machining center was manufactured in 2015. It features a spindle speed of 15,000 rpm, a spindle drive of 11.2 kW, and a tool magazine with 18+1 tools. The rapid traverse rate is 61 m/min, enhancing productivity. If you are looking to get high-quality milling capabilities, consider the HAAS DM-1 machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2015, Traverses XYZ: 762 x 508 x 508mm, Cedpfokticxjx Addoaa 500mm Diameter table, max table weight 300kg, table tilt +120°, -35°, 22.4kW, 12000rpm, CT40, 40 station tool changer, coolant, Tool Setter, Programmable coolant, swarf conveyor,

Condition: ready for operation (used), Year of construction: 2014, Control Unit Brand HAAS Main Drive Spindle Speed 12000 RPM Tool taper BT 40 Tools Codpoxx Dvqofx Addeaa Slots in storage 24 Media Internal cooling yes This 3-axis HAAS VF-2SS was manufactured in 2014 and features an internal coolant system (IKZ), a probe, and tool measuring capabilities. Ideal for precise and efficient machining tasks. If you are looking to get high-quality milling capabilities consider the HAAS VF-2SS machine we have for sale. Contact us for more information. Application Types Milling

Condition: good (used), Year of construction: 2012, X Y Z: 1270 x 508 x 508mm, table 1324 x 457mm, 12000 rpm, Cedpfx Aexpw Rvjddjaa BT 40, HAAS Control, 24 Station ATC, 40HP, chip auger, coolant, Haas TR210 5 axis trunnion table

Condition: ready for operation (used), Year of construction: 2018, General Data Machine weight 3700 kg Measurements height 2800 mm Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Tool taper BT 40 Number of axis 4 Dimensions Machine Length 2700 mm Table Caodpfox A I D Hsx Addja Table load 680 kg Movement X-Axis Movement 762 mm Z-Axis Movement 508 mm Y-Axis Movement 406 mm Tools Max weight 5 kg This 4-axis HAAS VF-2SS-EU vertical machining center was manufactured in 2018. It features a 762 mm X-axis travel, 406 mm Y-axis travel, and 508 mm Z-axis travel. Equipped with a BT-40 spindle achieving up to 12,000 rpm and a side-mount tool changer with a 30 + 1 tool capacity. Rapid traverse rates reach 35.6 m/min. Consider the opportunity to buy this HAAS VF-2SS-EU vertical machining center. Contact us for more information about this machine. Application Types Milling

Condition: excellent (used), Year of construction: 2014, Traverses X Y Z: 1016 x 660 x 635mm, Spindle nose to Table: 102 – 737mm, Table 1372 x 635mm, Spindle speed 12000rpm, Spindle Taper ISO40, Spindle Motor 22.4kW, HAAS Control with High Speed Machining, 24 Station ATC, Programmable Coolant nozzle, Low Volt light, Swarf auger, Renishaw Tool Setter & Probe Caedpep H Tb Nsfx Addoa

Year of construction: 2017, condition: ready for operation (used), Main Drive Spindle Speed 4800 RPM Spindle motor power 22.4 kW Number of axis 3 Codpex A I Edsfx Addjaa Movement Y-Axis Movement 50.8 mm This 3-axis HAAS DS-30SSY was manufactured in 2017. It features a dual spindle system with vector-driven main and secondary spindles, both offering 4,800 rpm. The turret accommodates 24 hybrid stations for versatile tooling options. It includes a high-pressure coolant system, belt-type chip conveyor, and an advanced control system with a 15" color monitor. If you are looking to get high-quality turning capabilities consider the HAAS DS-30SSY machine we have for sale. Contact us for more information. Application Types Turning

Year of construction: 2003, condition: ready for operation (used), General Data Machine weight 7200 kg Codpfx Aexwfnxjddoaa Measurements height 1900 mm Measurements depth 1800 mm Dimensions Machine Length 3800 mm Main Drive Number of axis 2 Spindle Speed 3200 RPM Spindle motor power 224 kW Movement X-Axis Movement 318 mm Z-Axis Movement 660 mm This HAAS SL-30 was manufactured in 2003. A robust horizontal turning machine featuring X/Z travel of 318/660 mm, turning diameter of 533 mm, and length of 660 mm. It includes a bar capacity of 76 mm, spindle power of 22.4 kW, and a maximum spindle speed of 3,200 rpm. Equipped with a 12-position tool turret and a semi-automatic hydraulic tailstock. Consider the opportunity to buy this HAAS SL-30 horizontal turning machine. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, Main Drive Spindle Speed 12000 RPM Spindle motor power 22.4 kW Number of axis 3 Movement X-Axis Movement 1270 mm Z-Axis Movement 635 mm Y-Axis Movement 508 mm This 3-axis HAAS VF-4SS vertical machining center was manufactured in 2008. It features a 1270 × 508 × 635 mm travel range, 22.4 kW spindle power, and a maximum spindle speed of 12,000 rpm. The machine includes a 40 + 1 position tool changer and a high-speed machining package. If you are looking to get high-quality milling capabilities, consider the HAAS VF-4SS machine we have for sale. Contact us for more information. Csdexwfn Ejpfx Addeaa Application Types Milling

Condition: ready for operation (used), Year of construction: 2015, operating hours: 5,792 h, Control Unit Brand HAAS Main Drive Spindle speed range 12000 Number of axis 3 Caedsxuldhopfx Addea Movement X-Axis Movement 1016 mm X-Axis Rapid Traverse 30.5 m/min Y-Axis Movement 508 mm Y-Axis Rapid Traverse 30.5 m/min Z-Axis Movement 635 mm Z-Axis Rapid Traverse 30.5 m/min Table Table load 794 kg This 3-axis HAAS VF-3SS vertical machining center was manufactured in 2015. It features a 1,372 × 457 mm table, a maximum load of 794 kg, and a spindle speed of 12,000 rpm. The machine includes a 30+1 side-mount ATC and a rapid traverse of 30.5 m/min. If you are looking to get high-quality milling capabilities, consider the HAAS VF-3SS machine we have for sale. Contact us for more information about this machine. Application Types Milling