Used Haas St 20 Y for sale (224)

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator Bedpszlxnhefx Abtsll 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 Bjdpozvy D Eefx Abtoll LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: excellent (used), Year of construction: 2006, HAAS VF-2BHE cnc machining center Year: 2006 Technical details: X axis travel 762 mm Y axis travel 406 mm Z axis travel 508 mm Spindle nose BT 40 Spindle speed max 7500 rpm Bjdszylhkopfx Abtsll Power 11 kW Tool changer 20 positions Table size 914 x 457mm Maximum weight allowed on table 680 kg Machine weight: 3600 kg Machine dimensions: 2670 x 2600 x 2570 mm Accessories/options: Spiral chip conveyor Remote control Prepared for 4.axis ( drive and wiring included ) Coolant tank Under power in our warehouse, possible to test it anytime!

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,408 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 239 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 584 mm, spindle motor power: 22,400 W, overall weight: 5,534 kg, number of axes: 4, This 4-axis HAAS DS30Y horizontal turning machine was manufactured in 2023. It features a maximum part swing of 533 mm and a maximum cutting diameter of 349 mm. The machine is equipped with a robust turret that accommodates 12 tools, ensuring versatility in operations. If you are looking to get high-quality turning capabilities, consider the HAAS DS30Y machine we have for sale. Contact us for further details. • Capacities: • Chuck size (main): 10.0 in / 254 mm • Max part swing: 21.0 in / 533 mm • Max cutting diameter (with BMT65 turret): 13.75 in / 349 mm • Max cutting length (varies with workholding): 32.5 in / 826 mm • Bar capacity: 3.00 in / 76 mm • Between centers: 32.5 in / 826 mm • Feedrates (rapids): • X: 472 ipm / 12.0 m/min • Y: 472 ipm / 12.0 m/min • Z: 945 ipm / 24.0 m/min • Axis motors (max thrust): • X: 4100 lbf / 18238 N • Y: 2300 lbf / 10231 N • Z: 5100 lbf / 22686 N • Main spindle: • Spindle nose: A2-6 • Drive system: Direct speed, belt drive • Max torque: 275 ft-lbf @ 500 rpm / 373 Nm @ 500 rpm • Draw tube bore: 3.0 in / 76 mm • Spindle bore: 3.50 in / 88.9 mm • Main spindle C axis: • Max speed: 60 rpm • Max rating: 5.0 hp / 3.7 kW • Positioning (±): 0.01° • Brake diameter: 13.9 in / 353 mm • Brake holding torque: 250 ft-lbf / 339 Nm • Control type: Interpolated motion and positioning • Secondary spindle: • Chuck size: 8.3 in / 210 mm • Spindle nose: A2-5 • Drive system: Direct speed, belt drive • Max rating: 15.0 hp / 11.2 kW • Max speed: 4000 rpm • Max torque: 100 ft-lbf @ 870 rpm / 135.6 Nm @ 870 rpm • Spindle bore ø (non-through): 0.81 in / 20.7 mm • Secondary spindle C axis: • Max rating: 5.0 hp / 3.7 kW • Max speed: 60 rpm • Positioning (±): 0.01° • Brake diameter: 8.5 in / 216 mm • Brake holding torque: 140 ft-lbf / 190 Nm • Control type: Interpolated motion and positioning • Secondary spindle positioning (M119): • Positioning (±): 0.02° • Brake diameter: 8.5 in / 216 mm • Control type: Positioning only • Turret: • Number of tools: 12 stations • OD vs ID tools: Any combination (will vary with turret) • Boring bar rear clearance (from back of turret): 4.00 in / 102.0 mm • Live tooling: • Max speed: 4000 rpm • Drive ratio: 1:1 • Tooling: BMT65 • General: • Coolant capacity: 55 gal / 208 L • Air requirements: • Air required: 4 scfm @ 100 psi / 113 L/min @ 6.9 bar • Inline air hose: 3/8 in • Coupler (air): 3/8 in • Minimum air pressure: 80 psi / 5.5 bar • Electrical specification: • Spindle speed: 4500 rpm • Drive system: Direct speed, belt drive • Spindle power: 30.0 hp / 22.4 kW • Input AC voltage (3-phase) – low: 220 VAC; full load amps: 70 A • Input AC voltage (3-phase) – high: 440 VAC; full load amps: 35 A • Dimensions – shipping: • Domestic pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm • Export pallet: 171 in x 90 in x 98 in / 434 cm x 229 cm x 249 cm Bljdozh Eh Tjpfx Abtel Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: excellent (used), Year of construction: 2023, operating hours: 1,168 h, functionality: fully functional, Controller HAAS Swing dia. 641 mm Swing over carriage 413 mm Maximum cutting diameter 229 mm Maximum cutting length 356 mm X axis travel 200 mm Z axis travel 355 mm Bar Capacity 44mm Spindle Speed 6000 rpm Spindle Nose A2-5 Rapid Feedrates X/Y/Z = 30,5 / 30,5 m/minute Spindle Motor Power 11 kW Turret Positions 12 stations Weight 3200 Kg Dimensions LxWxH = 3048 x 2108 x 1803mm Accesories, features - Integrated tool presetter - Chip conveyor Bodpfswvgbysx Abtsll - 3 jaws hydraulic chuck D160 mm - Without tailstock - Foot pedal - Machine mounts - Manuals The machine is barelly used and is in great technical and optical condition.

Condition: like new (used), Year of construction: 2015, operating hours: 3,300 h, functionality: fully functional, Machine in excellent condition, like new, only 3300 hours. Bjdpfezmu Utox Abtsll Machine weight 7259,5 kg Max. working length 584,2 mm Max. working diameter 406,4 mm Swing over bed 807,7 mm Axe X: 317,5 mm Axe Z: 584,0 mm Spindle boring 88,9 mm Number of tool positions 24 Speed 4800 rpm Main motor output 14,0 kW 3-jaw chuck 250mm With opposite spindle. Y axe +/- 50,6mm - live tools in all positions C axe Including automatic bar feeder - max. bar diameter 79mm - max. bar length 1520mm

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3087984, SPECIFICATION Swing over front apron 806mm Swing over cross slide 527mm Maximum cutting diameter 533mm Maximum turning length 660mm Spindle nose A2-6 Spindle bore 88.9mm Bar capacity 76mm Maximum spindle speed 3400rpm Spindle motor power 22kW Number of turret tool stations 12 Rapid traverse Z/X axis 24m/min Approximate weight 6500Kg MACHINE EQUIPPED WITH: - Haas CNC control system Live tooling with C axis Collet chuck Tool setting probe Parts catcher Hydraulic tailstock Servo bar 300 magazine bar feed Swarf conveyor Interlocked guarding Automatic lubrication system Bljdpszwuraefx Abtsl Coolant system Manual

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Bedozwxz Ejpfx Abtell Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Bedpszc Ni Ssfx Abtell Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: good (used), Year of construction: 2020, Maximum cutting diameter 305mm, maximum machining length 406mm, bar capacity 63.5 mm, spindle speed 4000 rpm, 20 hp spindle motor, 12 station turret, coolant, and swarf conveyor, 3 jaw chuck, toolsetter, Bedpfozg Edlsx Abtjll

Condition: excellent (used), Year of construction: 2020, operating hours: 7,320 h, machine/vehicle number: 3119208, turning length: 406 mm, turning diameter: 305 mm, spindle motor power: 14,900 W, spindle speed (max.): 4,000 rpm, spindle bore: 64 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, For sale: Used CNC lathe HAAS ST15 in very good technical condition. Operating hours: 7,320. Reason for sale: Standardization of machinery for compatibility with the rest of the machine park. Key features: Blodpfx Ajy A I Nxsbtel • Automatic Door • Renishaw WIPS Probing System • Hybrid BOT/BMT Turret (Dual Mount Tooling) • Live Tooling (Driven Tools – milling option) • Sub-Spindle (6,000 RPM) • Parts Catcher (if installed) • Chip Conveyor • Control Cabinet Cooler • Wireless Networking (WiFi) • Rigid Tapping • Extended Program Memory (1GB) • VPS Programming (Visual Programming System) For more information, please contact us by phone or email.

Condition: like new (used), Year of construction: 2022, operating hours: 105 h, functionality: fully functional, Haas ST50 Horizontal Turning Machine Slant Bed Lathe. Bought new directly from Haas and installed in Early 2023. As a "last of line" model from Haas (which they've yet to make this size since), this machine is fully loaded and as you can see from the build list below it is very well spec'd. It also only has 105 hours use. Viewing advised and welcome at our workshop in Canterbury, Kent. Videos can be sent and or uploaded to Youtube also. This machine and others we are selling are also listed else where. Please get in touch with us at Showan Hydraulics, Barham, Kent if you require any further details. £325,000 + VAT PRODUCT OVERVIEW • Maximum Capacity: 25.5" x 80" (648 x 2032 mm) • Spindle Bore: 8.5" (216 mm) • Swing Over Bed: 34.5" (876 mm) Bsdpjxrf Stofx Abtsll • Main Drive: 55 hp (41 kW) vector drive • Spindle Speed: 1200 rpm, 2-speed gearbox • Spindle Nose: Front and rear A2-15 • Chucks: 25" (635 mm) Manual 3-Jaw and 4-Jaw Chucks • Turret: 12-station bolt-on turret • Tailstock: Programmable servo with MT6 quill • Control System: 15" touchscreen interface with USB port, memory lock keyswitch, and colour remote jog handle • Additional Features: Rigid tapping and variable flow coolant pump _____ STANDARD FEATURES • Bolt-On Toolholder Kit: Comprehensive set of toolholders, sleeves, coolant block, and turning stick clamps for flexible setup. • 1200-RPM Spindle: Powerful 55 hp (41 kW) A2-15 spindle with 2-speed gearbox for optimal torque and speed. • Program Memory: 1 GB onboard memory for program storage and backup. • Coolant System: 95-gallon (360 L) tank with 3/4 hp (0.6 kW) pump del

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 3094252, SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 |Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg MACHINE EQUIPPED WITH: - Haas CNC Control system 3 jaw chuck 165mm diameter Parts catcher Hydraulic tailstock Bsdpfx Abozubxnjtoll Tool presetter Interlocked guarding Automatic lubrication system Coolant system

Condition: good (used), Year of construction: 2011, Swing 806mm, maximum cutting diameter 533mm, 762mm between centres, 660mm maximum cutting length, 76mm Bar capacity, Bledpfeywuvhex Abtjl 254mm 3 jaw chuck, 22.4kW Spindle Motor, 3400rpm spindle, 12 Station turret, tailstock, coolant, tool setter.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 406 mm, travel distance Y-axis: 304 mm, travel distance Z-axis: 254 mm, Haas #Mini-Mill vertical machining center, automatic tool changer (10 positions), travels X 406 mm / Y 304 mm / Z 254 mm. Tool changer: carousel type / Capacity: 10 tools Spindle speed: 10,000 rpm. Ideal for series production of precision CNC-machined parts. Bjdpfx Abjzxzfpetsll

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, table load: 1,814 kg, overall weight: 7,485 kg, spindle speed (max.): 10,000 rpm, spindle motor power: 44,700 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis HAAS VF-3YT/50 was manufactured in 2019. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine is equipped with a high-performance spindle capable of 10,000 rpm and a 30-position automatic tool changer. If you are looking to get high-quality machining capabilities, consider the HAAS VF-3YT/50 vertical machining centre we have for sale. Contact us for further details. • Condition: Used, fully operational • Operating/cycle hours: 6,744 h • Spindle/cutting hours: 4,454 hTravels • Spindle nose to table: 201–836 mm • Rapid traverse: 18 m/min • Maximum cutting feed: 12.7 m/minSpindle and tool changer • Maximum torque: 460 Nm • Drive system: Vector drive with 2-speed gearbox • Tool changer capacity: 30 toolsTable • Table size: 1,372 × 610 mm • T-slots: 7 • T-slot width: 15.9–16 mmShipping • Note: Dimensions listed as 1,370 × 660 × 630 mm are not overall machine dimensions • Export shipping dimensions (approx.): 3,970 × 2,600 × 3,230 mm • Approx. shipping weight: 7,485 kg Additional equipment • Chip conveyor with four additional augers Bledpfszwd Auex Abtsl • Haas Chip Lift • Through-Spindle Coolant (TSC), 300 psi / 21 bar • Programmable coolant nozzle • Coolant chiller • ACF 25-micron auxiliary coolant filter • Coolant mist condenser • Minimum Quantity Lubrication (MQL) • Automatic air gun • Through-Tool Air Blast (TAB) • PulseJet system • Renishaw Wireless Intuitive Probing System (WIPS) with probe riser block • Fourth-axis drive and wiring • High-Speed Machining (HSM) • DWO/TCPC (Dynamic Work Offsets/Tool Center Point Control) • RTAP-3 synchronized tapping • Wi‑Fi network connection and Wi‑Fi camera • Automatic door • High-intensity lighting • Approximately 15 tool holders • Complete documentation Technical Specification Taper Size ISO 50

Condition: like new (used), Year of construction: 2024, Traverses X Y Z: 762 x 508x 508, Table 914 x 457mm, Spindle speed 0 – 12,000rpm, Spindle taper BT40, Bodpfx Abjv Tah Aotsll Spindle Motor 22Kw, HAAS Control, 30 Station ATC, through spindle Coolant , Low Volt light, swarf auger, spindle probe, tool setter

Condition: used, Year of construction: 2007, turning diameter 250 mm turning length 500 mm control FANUC tool taper VDI 40 weight of the machine ca. 3,0 t HAAS SL-20THE CNC Lathe – Year 2007 Technical specifications - Max. turning length: 500 mm - Max. turning diameter: 250 mm - Swing over bed: 584.2 mm - Swing over cross slide: 241.3 mm - Distance between centers: approx. 609.6 mm - X-axis travel: 214.6 mm - Z-axis travel: 508 mm - Spindle nose: A2-6 - Spindle bore: approx. 76.2 mm - Max. spindle speed: 4,000 rpm - Spindle motor power: 14.9 kW / 20 HP Blodezvq Dispfx Abtjl - Driven/live tool stations: up to 10 - Input voltage: 360–480 V - Power supply: 3-phase

Condition: used, Haas St 10, 6.5" Diameter 3 Jaw Chuck, Serial No 3092094, Year 05/2015, Complete with Multifeed MX-1B Bar Feed Unit, Note no tailstock. Specifications: Swing: 25.25" Machining Length: 16.5" Blsdpfszvrd Rex Abtsl Chuck Size: 6.5" Bar Capacity: 1.75" Power: 15 hp Max RPM: 6,000 RPM Turning Dia: 14"

Condition: used, Year of construction: 2013, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, spindle speed (max.): 15,000 rpm, Equipment: chip conveyor, TECHNICAL DETAILS Travel range, X-axis: 508 mm Travel range, Y-axis: 406 mm Travel range, Z-axis: 508 mm Distance, spindle nose to machine table: max. 610 mm Distance, spindle nose to machine table: min. 102 mm Rated power: max. 22.4 kW Torque: max. 122.0 N·m at 2,000 rpm Torque with optional gearbox: max. 339 N·m at 450 rpm Spindle design: metric Spindle taper: SK40 Spindle speed: 15,000 rpm Table length: 660 mm Table width: 356 mm Width of T-slots: 15.90 to 16.00 mm Center distance of T-slots: 125 mm Number of T-slots in standard configuration: 3 Load capacity of the table with uniform distribution: max. 1,361 kg Feed rate during machining: max. 16.5 m/min Rapid traverse, X-axis: 25.4 m/min Rapid traverse, Y-axis: 25.4 m/min Rapid traverse, Z-axis: 25.4 m/min Tool diameter (overall): max. 89 mm Tool weight: max. 5.4 kg Tool-to-tool change time (average): 4.20 s Chip-to-chip change time (average): 4.50 s MACHINE DETAILS Coolant tank capacity: 208 l Input voltage AC, three-phase, low: 220 V AC Full load current, three-phase, low: 70 A Input voltage AC, three-phase, high: 440 V AC Full load current, three-phase, high: 35 A Weight: 3539 kg EQUIPMENT Tool changer, 20-position Bodpjzxhmtsfx Abtsll Chip conveyor Internal coolant supply, 21 bar Coolant mist extraction system Additional coolant filter

Condition: excellent (used), Year of construction: 2010, operating hours: 1,049 h, functionality: fully functional, HAAS VF-2 + 4th axis Year of manufacture: 2010 Condition: good, machine is functional and in operation Cutting time: only 1,049 hours Machine accuracy: approx. 0.01–0.02 mm Technical specifications: Travel in X / Y / Z: 762 × 406 × 508 mm Work table dimensions: 914 × 356 mm Maximum table load: 1,361 kg Spindle taper: ISO 40 Maximum spindle speed: 12,000 rpm Tool magazine: 24 positions Bjdpjzyabrefx Abtjll 4th axis – original Haas Renishaw tool probe Control system: HAAS CNC Chip conveyor

Condition: excellent (used), Year of construction: 2020, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: 1172799, spindle speed (min.): 15,000 rpm, Equipment: chip conveyor, rotational speed infinitely variable, Haas UMC-750 5 Axis Vertical Machining Centre with Haas CNC Control, 630mm x 500mm Table, Travels X Axis 762mm, Y Axis 508mm, Z Axis 508mm, Through spindle coolant, C Axis 360deg Rotation, B Axis -35deg to + 100deg, Bsdpfx Abex Uznfetoll High speed machining enabled Spindle Speed 12,000rpm, 40 Tool ATC 2020 machine , BT40 Spindle Taper, Swarf Conveyor, Coolant System. S/No. 1172799 Wireless probing.

Condition: used, Year of construction: 2018, Technical details: x-travel: 711 mm Bedpfozxz Hgex Abtell y-travel: 406 mm z-travel: 394 mm distance spindle nose and table: 546 - 152 mm table-size: 864 x 381 mm table load: 226 kg turning speeds: 15000 1/min power capacity: 11,2 kW max. torque on the spindle: 62 Nm spindle taper: SK 40 Tool changer: 18+1 rapid travel x/y/z: 61 m/min feed: 30,5 m/min max. tool weight: 5,4 kg max. tool length: 178 mm diameter of tools max.: 64 mm Tool change time tool/tool, milling spindle: 1,75 s internal coolant system feed: 21 bar weight of the machine ca.: 2427 kg dimensions of the machine ca.: 2,8 x 2,4 m Vertical 3-axis machining center POS mill 1100, from year 2009 in good condition. Accessories: - Chip conveyor Knoll - additional coolant filtersystem - Programmable coolan jet - automatic Coolant refillsystem - Airpressure through tool - Measuring probe system WIPS - Synchronized treading - Haas Connect remote control - Media Display - Cooling of electrical cabinet - fixtures and tools will not be sold. *

Condition: used, Year of construction: 2023, operating hours: 259 h, functionality: fully functional, machine/vehicle number: 1200002, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, Like-new Haas VF-4-EU CNC vertical machining center with only 259 operating hours. The machine is in excellent optical and technical condition. The VF-4 is already fully prepared for 4-/5-axis operation from the factory – the extensive 5th-AXIS package is installed: - Axis cards for the 4th and 5th axes - Dynamic workpiece offset - Tool center point control - High-speed machining - Programmable coolant nozzle - Wireless Renishaw measuring probe and tool probe In addition, the machine is unusually well-equipped: - TSC – internal coolant supply with 21 bar - Spiral chip conveyor - Complete coolant maintenance package (automatic replenishment, oil separator, mist collector) - Fast 30+1 tool changer - Spindle with 10,000 rpm The control system is the current Haas Next Generation Control with touchscreen, WLAN, Ethernet, and HaasConnect remote monitoring. This makes the machine immediately ready for demanding machining tasks. The original transport securing devices are available. An original Haas tool cart for SK40 is also included. Inspection and demonstration under power are possible at any time by appointment. Loading and transport can be arranged. A suitable TRT-210 CNC rotary table is offered in a separate listing and can be included in the package if desired. The LANG base plates are not included in the scope of supply. Technical data: - Travel ranges X / Y / Z: 1,270 × 508 × 635 mm - Spindle nose to table: 107 – 742 mm - Table: 1,321 × 457 mm, 5 T-slots (16 mm), max. table load 1,588 kg - Spindle: 10,000 min⁻¹, BT/CT 40, inline direct drive, liquid-cooled - Drive power: 22.4 kW - Max. torque: 122 Nm at 2,000 min⁻¹ - Rapid traverse X / Y / Z: 25.4 m/min - Feed rate max.: 16.5 m/min - Tool changer: Side SMTC, 30+1 positions - Tool max. diameter / length / weight: 64 mm / 330 mm / 5.4 kg - Tool change time (chip-to-chip): approx. 3.6 s - Connection voltage: 400 V / 50 Hz, 3-phase (internal transformer installed) - Compressed air: approx. 113 l/min at 6.9 bar - Coolant tank: 208 l - Weight: approx. 6,260 kg (with conveyor) Control: - Haas Next Generation Control with touchscreen - 1 GB program memory, Ethernet + WLAN - HaasConnect (remote monitoring), HaasDrop (wireless file transfer) Bedpoy Tp E Aofx Abtell - M130 media display, safe run, synchronized thread drilling - Early detection module for power failure, overvoltage protection - Equipment / options (all installed from the factory) - 5-axis package VF-YT (4th + 5th axis drive-side prepared, DWO/TCPC, high-speed machining, programmable coolant nozzle) - Wireless Renishaw measuring probe system (intuitive) - TSC – internal coolant supply through the spindle, 21 bar - Spiral chip conveyor - Coolant maintenance package (automatic replenishment, oil separator, mist collector) - Additional coolant filter (bag filter 25 µm) - Filter set for chip sump (200 µ) - Variable coolant flow (M-code controlled) - Blowing of the inside of the machine door - Lifting eyes, touchscreen, door lock

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 1162068, SPECIFICATION Table size 1370mm x 620mm X axis traverse 1016mm Y axis traverse 660mm Z axis traverse 635mm Spindle nose to table 102 – 737mm Spindle BT40 Spindle speeds 0-12,000rpm Spindle motor 22.4kW Rapid feed rate 18m/min Toolchanger capacity 30+ 1 tools Approximate weight 7750Kg MACHINE EQUIPPED WITH: - Haas CNC Control Swarf auger High speed machining Co-ordinate rotation and scaling Rigid tapping 5 off BT40 toolholders Filtermist extraction system Blodpfjzr H Tljx Abtsl Programmable coolant nozzle Lighting Guarding