Used Haas Vf 2 Ss for sale (222)

Condition: ready for operation (used), Year of construction: 2013, operating hours: 989 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 406 mm, controller manufacturer: HAAS, table width: 267 mm, table length: 1,467 mm, table load: 159 kg, overall weight: 2,295 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, number of slots in tool magazine: 10, number of axes: 3, This 3-axis HAAS HAAS TM-2P was manufactured in 2013. It features an X-axis travel of 1016 mm, Y-axis travel of 406 mm, and Z-axis travel of 406 mm. The machine includes a table size of 1467 x 267 mm and a maximum table load of 159 kg. If you are looking to get high-quality machining capabilities, consider the HAAS HAAS TM-2P vertical machining centre we have for sale. Contact us for further details. • Max tool diameter: 89 mm • Positioning accuracy: 0.01 mm • Repeatability: 0.01 mm Chjdpfx Apozcnzmjtob • Air pressure: 6.9 bar • Air consumption: 113 l/min • Power supply: 3 × 400 V, 50 Hz Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Year of construction: 2019, operating hours: 11,111 h, spindle speed (max.): 4,000 rpm, controller manufacturer: HAAS, controller model: n/a, This HAAS ST-20 was manufactured in 2019. A robust horizontal turning machine featuring a 210mm hydraulically actuated chuck, a VDI turret with 12 tool stations, and a spindle speed of 4,000 rpm. It supports a maximum load of 330 x 572 mm and bar diameters up to 64 mm. Ideal for precision turning operations. Contact us for more information about this machine. Additional equipment • Additional Options: Driven 4000 rpm tool and C-axis, 12 stations BMT65, Automatic tool presetting arm • Features: Hinged belt chip conveyor, Lathe parts catcher • Coolant System: 208l coolant tank, Variable coolant flow • Other Features: Visual part programming system (1GB), Hydraulically actuated 210mm chuck A2-6, Early detection module for power failure, Synchronized tapping, safe running, Control touchscreen, Ethernet, HaasConnect, HaasDrop, M130, WLAN • Additional Features: Macros, SOM Machine Benefits Technical Machine Benefits • Maximum load capacity: 330 x 572 mm / diameter range for bars: 64 mm • Type: vdi turret with 12 tool stations • Type: programmable hydraulic tailstock • Preparation for robot / driven toolschip conveyor and tool measurement are includedOPTIONAL: Tool holders at an additional cost. See pictures attached Cedpfx Asx D Ezfeptehb

Condition: used, Year of construction: 2015, operating hours: 17,260 h, functionality: fully functional, machine/vehicle number: 1121106, rotational speed (max.): 15,000 rpm, spindle nose: BT40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Haas 750SS 5 Axis Milling Machine Machine built 2015 and has been well maintained. Only making Aluminium components. Manufacturing parts for the motorcycle market. 5-axis machining is an effective means to reduce setups and increase accuracy for multi-sided and complex parts. The Haas UMC Series universal machining centres are cost-effective solutions for 3+2 machining and simultaneous 5-axis machining. The UMC-750SS has an integrated high-speed, dual-axis trunnion table with a 500 mm diameter platter that features standard T-slots and a precision pilot bore for fixturing versatility. The trunnion provides +120 and -35 degrees of tilt and 360 degrees of rotation to provide excellent tool clearance and large part capacity. • 5-axis simultaneous machining • Powerful inline direct-drive spindle • High-speed trunnion table • Thru spindle coolant, bed wash and flood coolant • Swarf Conveyor Chedszic Tpspfx Aptjb BT40 Spindle with spindle speed up to 15,000 rpm 39 Tool carousel, with pre select. Tool probe and Tool Setting function The machine is still in daily use, the hours will increase as a result. Viewing by prior arrangement. Buyer to arrange collection at their own expense. Price is £55,000 plus Vat where applicable. Sold Ex Works

Condition: new, We would like to offer shafts dedicated for HAAS 2000XL, 1500, and TEREX TDS 820 machines, equipped with side combs and a breaking bar. -4-7-7 -4-9-9 PROTECHNIKA is a company with 21 years of history and from the very outset has specialized in the production of spare parts and complete recycling lines. In recent years, we have expanded our product portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have significantly reduced lead times while maintaining consistently high quality. Grinding shafts are a series product, which, among other things, enables us to collaborate with machine manufacturers as an OEM supplier. What distinguishes PROTECHNIKA from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland-certified quality - ISO 9001 - Automated welding process / ISO 15613 / ISO 15614 compliant Chedex Hhuijpfx Aptjb - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - In-house design department capable of meeting any customer requirements - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of paramount importance to us, as their satisfaction is our success!

Condition: used, Year of construction: 2012, x-travel 2134 mm y-travel 1016 mm z-travel 762 mm CNC-control HAAS CNC Table dimensions 2134 x 914 mm max. table load 1814 kg spindle taper SK 50 spindle turning speed range 7500 U/min spindle motor 22,4 kW feed range 1270 mm/min rapid traverse 15,2 m/min tool change unit 30 Pos. coolant IKZ voltage 400 V weight of the machine ca. 13,2 t dimensions of the machine ca. 4,70 x 2,95 x 2,99 m - Serial No.:1099476 Cedox E Dn Njpfx Aptohb - Year of manufacture 11/2012 - Through spindle coolant TSC - 5-Axis pivotable rotary table HAAS TR310 (as new condition) PRICE FOR MACHINE WITHOUT ROTARY TABLE TR310: 82.000,- EUR

Condition: used, Year of construction: 2008, HAAS SL - 20 LATHE, YEAR FIRST INSTALLATION: 2008 TURNING LENGTH: 508 mm Cjdpoyzzw Tjfx Aptohb TURNING DIAMETER: 262 mm TRAVELS: X: 203 mm Z: 508 mm BAR CAPACITY: 51 mm NUMBER OF TURRETS: 1, 10 POSITIONS SPINDLE SPEED: 4,000 RPM CHIP CONVEYOR

Condition: ready for operation (used), Year of construction: 2014, operating hours: 5,316 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 213 mm, travel distance Y-axis: 51 mm, travel distance Z-axis: 572 mm, number of axes: 3, This 3-axis HAAS ST-20Y was manufactured in 2014. It features a CNC lathe with C and Y-axis capabilities, a spindle speed of 4000 rpm, and a chuck size of 8 inches. Additional features include a 12-station turret, chip conveyor, and a programmable hydraulic tailstock. Ideal for precision turning operations. If you are looking to get high-quality turning capabilities consider the HAAS ST-20Y machine we have for sale. Contact us for more information about this machine. • Chuck size: 8" (210 mm) • Programmable hydraulic tailstock: MT4 • Standard program memory: 1 GB Codpfex D Nzpjx Aptjhb Additional equipment • Chip conveyor • Automatic tool presetter • Part catcher • USB port • 6 live tools (3 axial and 4 radial) • BOT holder and VDI holder

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, We offer this overhauled HAAS TR210 rotary/tilting table, year of manufacture 2015. The TR210 is a two-axis rotary/tilting table with tailstock, providing maximum rigidity and precise performance for 3+2 and full 5-axis machining of small to medium-sized parts. Encoders on the A-axis (tilt axis) improve positioning and repeatability accuracy. The TR210 fits VF-3 and larger machines from the VF series (the extended Z-axis clearance option is highly recommended). The table has been overhauled and serviced. All worn spare parts, seals, and O-rings have been replaced. Chodpsyxw Aysfx Aptob We can provide a video upon request showing flawless machining. If you have any questions or need further information, please feel free to send us a message or call us.

Condition: good (used), Haas Laser HL 1203D Optical configuration: 22-31-21-BX Laser class 4 1500 W 1064 nm Financing through our bank is also possible. Cedpfx Aexam Ryeptehb komplett-konzept.leasingo.de You can find more items—new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2006, Haas TM 2 Csdpfxjyftdfj Aptshb TRAVELS X 1016MM Y 406 MM Z 406MM Rigid tapping Here at Omega Design we have using Haas machines for 15 years and built our business doing so, we currently run 15 Haas machines. We find the TM2 to be a very capable machine with market leading reliability. The machine uses Industry standard BT40 tooling. The Haas control is simple to use and incorporates onscreen toolpath verification, Rigid tapping is also a featured.Circular interpolation,a standard feature,makes lathes almost obsolete for cylindrical profiles. The control interfaces well with CAD-CAM,we will help with setup if required. This machine would make an ideal entry level machine but at the same time is great for quantity production of precision cnc machined parts The machine has been checked by qualified engineers and is ready for work. We use the machine for occasional toolmaking so we can demonstrate if required.

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, This is the Haas equivalent of the Fanuc Robodrill and very impressive it is! Shown running on our race car components, we can help with training and setup if required pictures show components we are currently making on the DM2 5th Axis enabled 4th axis Interface, 5th axis Interface, Coolant, Interlocked guards, High speed machining enabled Low Volt Light, Programmable Coolant Nozzle, Remote Hand Wheel, Swarf Auger, Through Spindle Coolant, USB Port Control HAAS Machine Dimensions 2811 x 2463 x 2583mm Machine Weight 2427kg Max & Min distance from table to spindle 152 - 546mm Maximum Cutting Feedrate 30.5m/minute Maximum Tapping Capacity M12 (Aluminium) Maximum Tool Diameter 64mm Chjdpfxeydil No Aptob Maximum Tool Diameter with Empty Adjacent Pockets 64mm Maximum Tool Length 178mm Maximum workpiece weight 113kg Memory 1Gb Rapid Feedrates 61m/minute Spindle Motor Power 40HP Spindle Speed 15000rpm T- Slots 3 x 16mm Table Size 864 x 381mm Tool Change Capacity 18 + 1 Tool Change Time (Chip to Chip) 1.6 seconds Tool Size BT40 Traverses XYZ 711 x 406 x 394mm

Condition: excellent (used), Year of construction: 2016, operating hours: 16,000 h, functionality: fully functional, nominal power (apparent): 11 kVA, controller manufacturer: haas, spindle speed (min.): 10 rpm, spindle speed (max.): 10,000 rpm, spindle motor power: 11 W, number of spindles: 1, number of slots in tool magazine: 21, Equipment: chip conveyor, Here is the complete reference sheet combining the Haas DT-1 machine specifications, probing package, and 5-axis setup in metric units. 2016. Located in Israel Transport cost to Erope 8000 Euro under power Machine Travels & Work Envelope X-Axis Travel: 508 mm Y-Axis Travel: 406 mm Z-Axis Travel: 394 mm Spindle Nose to Table Top: 152 mm – 546 mm Worktable Table Size (L x W): 660 mm x 381 mm Max Weight on Table: 113.4 kg T-Slot Width: 15.9 mm – 16.0 mm T-Slot Center Distance: 125 mm (3 standard slots) Spindle Specs Spindle Taper: BT30 Max Speed: 10,000 RPM ATC 20+1 Codezwxz Ejpfx Aptjhb 5-Axis Setup (TRT100 Dual-Axis Rotary Table) Rotary Unit: TRT100 dual-axis tilting trunnion (mounted on the table). Platter Diameter: 100 mm Max Part Swing: 213 mm Weight Capacity on Platter: 6.8 kg (3+2 positioning) / 2.3 kg (simultaneous 5-axis) Travel: A-axis (Tilt) ±120°, C-axis (Rotation) 360° continuous Indexing Speeds: 1,000 deg/sec on both axes Control Requirements: 4th & 5th-axis drive options installed on the machine control. Key Software Features: Supports 3+2 indexing and continuous 5-axis simultaneous machining. DWO/TCPC (Dynamic Work Offsets / Tool Center Point Control): Manages work offsets automatically as part angles tilt/rotate, eliminating the need to re-post programs when mounting locations change. Working Clearance: The TRT100 unit consumes ~230 mm of vertical space, leaving a tight Z-axis machining clearance window (~160 mm) inside the machine's 394 mm total Z-travel. Probing & Tool Measurement (WIPS-R / Renishaw) Hardware Package: Workpiece Spindle Probe: Renishaw OMP40-2 (BT30 optical touch probe) Tool Setter Probe: Renishaw OTS (Table-mounted optical tool setter) Receiver: Renishaw OMI-2T (Modulated optical transmission) Tool Setter Functions: Automatic tool length offset setting, rotating tool diameter offset calibration, and in-cycle tool breakage detection. Workpiece Probe Functions: Work Coordinate System (G54–G59) setting, feature inspection (bores/bosses/surfaces), and part alignment skew angle calculation.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 208 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Z-axis: 406 mm, number of axes: 2, Horizontal turning machine manufactured in 2023. This HAAS ST-15 features a maximum spindle speed of 4000 RPM and includes a 12-station bolt-on turret. It comes equipped with a Haas Bar Feeder and a hinged belt chip conveyor for efficient operation. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15 machine we have for sale. Contact us for further details regarding this machine. • Condition: very good • Power on time: 1369:37:08 h • Cycle start time: 373:45:41 h • Feed cutting time: 208:26:21 h • Finished parts counter: 250 • M30 counter 1: 1577 • M30 counter 2: 14238 • Electrical: 440 V, 3-phase, 50/60 Hz • Full load amps: 20 A • Largest load: 18 A • Sub-spindle: not equipped (max speed 0 rpm) • LT-spindle: not equipped (max speed 0 rpm) Cedpfey R Dh Tjx Aptjhb • Memory: 1 GB Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2022, spindle speed (max.): 4,000 rpm, travel distance X-axis: 200 mm, travel distance Y-axis: 102 mm, travel distance Z-axis: 406 mm, spindle motor power: 14,900 W, number of axes: 4, This 4-axis HAAS ST-15Y was manufactured in 2022. It features a maximum spindle speed of 4000 rpm and a spindle power of 14.9 kW. The machine has a workpiece diameter over the bed of 419 mm and a maximum cutting length of 406 mm. If you are looking to get high-quality turning capabilities, consider the HAAS ST-15Y horizontal turning machine we have for sale. Contact us for further details. • Capacities • Chuck size: 210 mm • Max part swing: 419 mm • Max cutting diameter (BOT or VDI turret): 305 mm • Max cutting length: 406 mm • Bar capacity: 64 mm • Feedrates (rapid) • X-axis: 12.0 m/min • Y-axis: 12.0 m/min • Z-axis: 30.5 m/min • Axis motors (max thrust) Chodpfx Aszlr I Isptsb • X-axis: 10,676 N • Y-axis: 10,231 N • Z-axis: 16,458 N • Spindle • Spindle nose: A2-6 • Spindle bore: 88.9 mm • Max spindle torque: 203 Nm at 500 rpm • Main spindle C-axis • C-axis power: 3.7 kW • Max speed: 60 rpm • Positioning accuracy: ±0.02° • Brake clamp force: 4448 N • Brake diameter: 366 mm • Brake holding torque: 190 Nm • Control: Interpolated motion and positioning • Turret and tooling • Number of turrets: 1 • Number of tool slots: 12 • Tool taper: VDI40 • Rotating tools: Yes • Live tooling speed: 4000 rpm • Turret configuration: 12-position VDI turret • Tailstock • Type: Hydraulic tailstock • Quill travel: 95 mm • Manual body positioning: 508 mm • Thrust range: 623–5027 N • Coolant and air • Coolant capacity: 114 L • Air required: 113 L/min at 6.9 bar • Electrical • Input AC voltage (3-phase high): 440 VAC • Full load amps (3-phase high): 20 A • Full load amps (3-phase low): 40 A • Configuration notes • C-axis: Yes • Y-axis: Yes • Driven tools: Yes • Counter spindle: No • Power-on hours: 4,500 h Technical Specification Counter Spindle No Driven Tools Yes

Condition: used, Year of construction: 2010, machine/vehicle number: IntNr231656, HAAS DT-1 CNC machining center – manufactured in 2010 For sale is a HAAS DT-1 CNC machining center, manufactured in 2010, equipped with a 3+2-axis system, a Renishaw measuring probe, and a KUKA KR 5 sixx R850 WP. Codpjzwk Iwofx Aptehb Technical data Manufacturer: Haas Model: DT-1 Year of manufacture: 2010 Machining: 3+2-axis Cycle time: 4,962 h Feed time: 3,079 h CNC control: Haas Chip conveyor: Integrated screw conveyor system Measuring probe: Renishaw Internal cooling (IKZ): present, currently defective Automation – KUKA KR 5 sixx R850 WP, control panel currently defective Dimensions of the robot cell Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 800 mm Dimensions including infeed and outfeed Height: approx. 2,100 mm Width: approx. 1,150 mm Depth: approx. 2,400 mm The machine can be inspected on-site by appointment. Subject to changes and errors in the technical data and information, as well as prior sale!

Condition: used, Dual-spindle Haas DS-30Y with only 742 spindle hours — Y axis, full C axes and 6,000-rpm live tooling for complete machining in one setup. Factory-fitted with the ATP tool presetter, LCC3 chip conveyor and auto jet blast on the sub-spindle. Haas DS-30Y — Year of manufacture 2023 CNC CONTROL Controller: Haas Next Generation Control (NGC) X-axis travel mm: 239 Z-axis travel mm: 826 Y-axis travel mm: ± 51 Max. turning length mm: 826 Max. turning diameter mm: ø 349 Chjdpfxozv T Nns Aptjb Swing over bed mm: ø 533 Spindle bore / bar capacity mm: ø 88,9 / 76 Rapid traverse m/min: X/Y: 12 / Z: 24 Tool positions per turret: 12 Tool holder type (VDI / BMT / others): BMT65 Driven tools max. speed rpm: 6.000 MAIN SPINDLE Max. spindle speed rpm: 4.500 COUNTER / SUB-SPINDLE Counter spindle max. speed rpm: 4.000

Condition: refurbished (used), Year of construction: 2003, operating hours: 15,000 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 534 mm, feed length X-axis: 762 mm, feed length Y-axis: 305 mm, feed length Z-axis: 534 mm, torque: 45 Nm, controller manufacturer: Haas, total height: 2,700 mm, total length: 2,200 mm, total width: 1,750 mm, table width: 267 mm, table length: 1,213 mm, rotational speed (max.): 6,000 rpm, overall weight: 1,315 kg, spindle speed (max.): 6,000 rpm, spindle motor power: 5,600 W, spindle nose: CT40/ISO/BT40, number of spindles: 1, input voltage: 400 V, type of input current: three-phase, Three-axis vertical CNC milling machine Haas TM-1HE, numerically controlled, with a 6000 rpm spindle. The machine is being sold by Haas service technicians with 10 years of experience. The machining center has undergone a complete, comprehensive inspection; it has been refurbished and is ready for operation. The mill is equipped with a range of additional options: - Higher-speed spindle up to 6000 rpm - Rigid tapping - Rotation & scaling - M19 spindle orientation - Macro programming - HSM (High Speed Machining) - IPS (Intuitive Programming System) - Possibility to activate 4th axis after adding servo amplifier and wiring; can be sold separately (fourth axis option) - Air coolant system Machine Information: - Machine type: Three-axis vertical milling machine Haas TM-1 - Serial number: 33515 - Manufacturing date: 12/03 - Spindle speed: 6000 rpm - X-axis travel: 762 mm - Y-axis travel: 305 mm - Z-axis travel: 534 mm - Minimum spindle-to-table distance: 102 mm - Maximum spindle-to-table distance: 636 mm - Table size: 1213 × 267 mm - T-slots: 3 slots, 16 mm wide - Overall dimensions (W × D × H): 220 × 175 × 270 cm - Weight: 1315 kg - Spindle motor power: 5.6 kW - Maximum torque: 45 Nm - Spindle taper: CT40 / ISO / BT40 Csdpfx Aoyanlaeptshb - Voltage: 366/425 V - Phase: 3 - Full load current: 13 A - Frequency: 50/60 Hz - Largest load current: 16 A The machine has undergone a full, comprehensive inspection. All of the following components have been checked and verified: - Ballscrews - Linear guides and ways - Lubrication system - Spindle assembly - Spindle motor - Encoder - Vector drive - Servo amplifiers - I/O board - Processor board - All electrical cabinet components - Axis drives - Tool change system - CNC controller - Additional subsystems and components The machine is fully refurbished and ready for immediate operation.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 14,870 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HAAS VM-3 was manufactured in 2015. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a maximum spindle speed of 12,000 rpm and an automatic tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HAAS VM-3 vertical machining centre we have for sale. Contact us for further details. • Software version: M18.24B • Spindle taper: 40 taper • Power supply: 354–488 V, 3-phase, 50–60 Hz • Options/features: • Through-Spindle Coolant (TSC) • High-Speed Machining (HSM) • Programmable coolant • Coolant system with filtration Chodszv T Ukjpfx Aptob • Operating data: • Run time: 14,870 h • Tool changes: 117,359 • Power-ons: 2,608 Additional equipment • Renishaw workpiece probing system • Tool measurement and setting system • Chip removal system

Condition: used, Year of construction: 2015, Specifications Condition Used Year 2017 Clamping area of the table 500 mm Travel in the x-axis 762 mm Travel in the y-axis 508 mm Travel in the z-axis 508 mm Spindle speed 0 - 12000 rpm Number of driven axes 5 Cooling through the spindle YES Cooling pressure bar Spindle taper 40 Max. workpiece weight 300 kg Tool magazine YES Number of positions in the magazine 40+1 B-axis +35/-110 ° C-axis 360 ° Max. table load 300 kg Max. spindle torque 122 Nm Rapid traverse Csdpfozxw Itox Aptshb 22.9 m/min Machine weight 6463 kg Total power input 28 kVA

Condition: used, Year of construction: 2014, Bar capacity 102mm Chuck size 250mm (10") Control system HAAS Machine dimensions 3073 x 2007 x 2108mm Machine weight 6487kg Maximum cutting diameter 381mm Maximum cutting length 660mm Codpozxw Hvofx Aptehb Rapid traverse rates XZ: 24 x 24m/minute Spindle motor power 40Hp Spindle nose A2-8 Spindle speed 3200rpm Swing over bed 533mm Tailstock taper MT #4 Turret positions 12 stations X-axis travel 239mm Z-axis travel 660mm

Condition: excellent (used), Year of construction: 2007, X-axis: 1,600 mm Y-axis: 800 mm Z-axis: 740 mm Max. workpiece size: 1,600 x 700 mm Max. table load: 1,200 kg Spindle speed: 12,000 rpm Chsdpfx Apozcpplstsb Tool holder: SK40 Tool changer: 24 positions Control system: HAAS Version M15 Includes 4th and 5th axes, ORIGINAL HAAS Includes chip conveyor Includes documentation

Condition: used, Year of construction: 2005, turning diameter 250 mm turning length 700 mm control FANUC weight of the machine ca. 3,35 t HAAS SL-30THE CNC Lathe – Manufactured in 2005 Technical Specifications - Max. turning diameter: 250 mm - Max. turning length: 700 mm - Number of axes: 2 - X-axis travel: 287 mm - Z-axis travel: 864 mm - Spindle bore: 69 mm - Max. spindle speed: 3,400 rpm - Tool turret: 12-station - Tool holder: VDI 40 - Power supply: 360–480 V, 3-phase, 50/60 Hz - Rated power: 22 kW - Max. connected load: 70 A - Full-load current: 40 A - CNC control: FANUC Codozvq Dvepfx Aptehb Features - 12-position tool turret - VDI-40 tool holder - Hydraulic chuck - Hydraulic tailstock - Chip conveyor - Coolant system - Full enclosure with safety interlock - Suitable for single-part and series production - Technical documentation

Year of construction: 2011, condition: used, Max. throughput: 25t/h, inlet width: 1300mm, inlet height: 1200mm, rotor diameter: 1200mm, drive power: 132-315kW, an on-site inspection is possible. Chodpfx Aezyq T Ejptob

Condition: ready for operation (used), Year of construction: 2001, spindle speed (max.): 3,000 rpm, travel distance X-axis: 287 mm, travel distance Z-axis: 864 mm, controller manufacturer: HAAS, number of axes: 2, Horizontal turning machine manufactured in 2001. This HAAS SL-30THE was designed for precision with a spindle speed of 3,000 RPM and a claw chuck diameter of 254 mm. With an X-axis travel of 287 mm and a Z-axis travel of 864 mm, it offers reliable performance for turning applications. Consider the opportunity to buy this HAAS SL-30THE horizontal turning machine. Contact us for further details. Codpfx Apjyhb Rretehb • Claw chuck diameter: 254 mm • The machine runs, but the Vector drive malfunctions when slowing down the engine Vector drive is less than a year and a half old, and repair is likely an option.

Condition: excellent (used), Year of construction: 2017, operating hours: 5,000 h, functionality: fully functional, Controller HAAS Table size D500 mm Table load 300 kgs X travel 762 mm Y travel 508 mm Z travel 508 mm B swivel +120 - 35 degree C rotation 0,001 - 360 degree Distance between spindle end and table surface 102 - 610 mm Max. spindle speed 8100 rpm Cjdpfxexva Ahs Aptjhb Max torque 122.0 Nm at 2000 rpm Spindle power 22,4 kW Spindle drive system Inline Direct-Drive Tool holder SK40 ATC magazin 30+1-fold Max. tool dia (next to each other) D64 mm Max. tool dia (neighboard places empty) D127 mm Max. tool length 305 mm Max. tool weight 5.4 kgs Weight 6500 kgs Dimensions LxWxH = 4420 x 2340 x 2540 mm Features, accessories - Coolant unit - High pressure pump (CTS) - Chip conveyor - RENISHAW tool presetter - RENISHAW zero point presetter - Manuals The machine is still in production in Hungary and can be inspected in operation. It was purchsed as new. Ready to buy immediately.