Used Hacker Knife for sale (1,482)

Condition: like new (used), functionality: fully functional, fuel type: electric, Material width for the material inlet: 500 mm METRO 55 HACKER – a professional machine for shredding wood waste. A powerful sawmill shredder, designed for shredding wood waste, branches, boards, and production residues in sawmills and wood processing plants. Its robust construction and powerful cutting system ensure reliable and efficient operation even under heavy loads. The machine is ideally suited for the production of firewood chips, biomass, and material for further processing. Material width for the material inlet: 500 mm Number of blades: 2/3/4 Bodpfx Akjz H Tvaotolp Main engine power: 55 kW Power of the feed motor: 2x3 kW Feed speed: 25 m/min Automatic motor load control. Product features: - High work efficiency, - Robust steel construction, - Safe material feed system, - Possibility of continuous operation, - Easy operation and maintenance, - Use in sawmills and industrial plants. Application: Shredding wood and sawmill waste, Wood chip production, Biomass processing, Recycling of wood waste.

Condition: ready for operation (used), Year of construction: 1999, IMMEDIATELY AVAILABLE, chamber filter press from Häcker with base frame and 50 m3/h Abel pump, plate format 1200 x 1200 mm, approx. 90 PP plates, 30 mm cake, content approx. 2700 liters, automatic. Plate transport, open outlet in filtrate trough on both sides, press is ready for use immediately after assembly, Abel pump was serviced by the manufacturer shortly before it was taken out of service, galvanized base frame with staircase, location is near Würzburg / Germany Bodpfx Akjrunu Ijtelp

Year of construction: 1994, operating hours: 3,689 h, condition: used, Schliesing MX 660 Bodpez Hidysfx Aktelp Wood chipper on a two-axle chassis > Hatz 4L40C diesel engine > Braked two-axle chassis > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will gladly assist you. Further information can be found on our website. Errors and prior sale excepted! Road approval = Further information = Year of manufacture: 1994 Operating hours: 3,689 Please contact Tobias Ebert for further information.

Condition: used, Year of construction: 2004, Format: 310 x 430 mm Equipment: Counter 22 Mio Co-Pilot with Touchscreen Infeed conveyor from the right Automatic Magazine for In-line Production Counting Stacker Product Counter Tool Presetter Blsdpfx Aey Tacxoktep Total number of knife sets: 1 Interchangeable Cutting Cassettes (Standard Set)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, grinding length: 1,500 mm, grinding spindle motor power: 7 W, grinding wheel diameter: 200 mm, GOCKEL G50 el straight knife sharpening machine Machine has been overhauled and is in perfect working order. Bjdjz D H Rlepfx Aktslp Mechanical feed. Variable feed rate. 7.5 kW spindle.

Condition: excellent (used), functionality: fully functional, Water jet cutter for fries and vegetables Casting manufacturer: GME Model/Type: 11584-1 Serial number: 0902 / 2684 Power supply: Hydraulic / hydro-pneumatic Bjdpez N S Emsfx Aktslp Working equipment: 5 interchangeable dies and cutting heads (including those for straight fries, crinkle-cut fries, and sticks) The water jet cutter is a professional, industrial water jet cutting machine (hydro-cutter) designed for lossless and fast water jet cutting of potatoes into fries and root vegetables in food processing plants. The machine works perfectly in large production lines for fresh and frozen fries, catering establishments, and industrial vegetable wholesalers. The operating principle is based on hydro-transport, in which the raw material carried by a high-pressure water jet passes through a guide sleeve (aligner) and strikes a stationary array of cross-cutting blades at high speed. This technology completely eliminates cracking and crushing of the vegetables, guaranteeing a perfectly smooth cutting surface and the highest efficiency, reaching several tons of raw material per hour.

Condition: used, Year of construction: 2010, functionality: unexamined, Weinig RS 2000 Bodpfswmw Daex Aktjlp

Year of construction: 2013, condition: used, functionality: fully functional, This machine is used for sharpening straight blades used in Eillert, Fam, and other slicing machines. The machine is in good working order and ready for use. Type: SKGM Bljdpfxoz H Atuj Aktsp Year of manufacture: 2013 Please check out my other listings.

Condition: new, Ultrasonic Knife 20Khz CPM10V 1/1 backstock 40mm (S20CPRSF Bsde Afdzkepfx Aktslp

Condition: used, Year of construction: 2006, functionality: fully functional, Fisher + Rückle AFD-35/2600 – Double-Knife Veneer Guillotine Industrial heavy-duty hydraulic double-knife guillotine designed for precise longitudinal cutting and trimming of veneer sheets. Designed for industrial veneer processing, ensuring precise cutting, automatic positioning, and programmable cutting sequences. Technical Specifications Manufacturer: Monguzzi, Italy Brand: Fisher + Rückle Model: AFD-35/2600 Year of manufacture: 2006 Bodsy Tm Tkepfx Aktelp Cutting length: 2,600 mm Cutting system: Double-knife, hydraulic Control system: Computerized with programmable functions Operating modes: Manual and automatic programmed operation Pressure beam: Hydraulic Number of motors: 3 Installed power: 9 kW Power supply: 400 V / 50 Hz Weight: 7,000 kg CE marking: Yes

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, working width: 1,300 mm, transport length: 7,500 mm, volume flow: 40,000 m³/h, total length: 7,500 mm, Used for drying coated glass, furniture, and wood-like materials. Consists of: - Tunnel 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW - Tunnel 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 110 kW - Tunnel 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU - Roller conveyor CEFLA TR 3000 Heating medium - Electricity 1. Dryer CEFLA FEV E: LAMINAR AIR DRYER (ECOGEL E4/5) Type: SP-FEV E - 90 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h (heating register 90 kW) 2. Dryer CEFLA FEV EU: AIR KNIFE DRYER (AQUADRY LA/5) Type: SP-FEV EU - 115 kW This in-line hot air dryer is suitable for rapid evaporation and curing processes. This dryer is configured with a laminar hot air flow in a direction opposite to the panel feed and with adjustable recirculation. Overall length: 7500 mm Working width: 1300 mm Overall width: 1783 mm Max. drying height: 1780 mm (excluding conveyor) Usable height of the passage: 80 mm Installed electrical power: 115 kW Solvent-containing air exhausted to the outside: 0-4000 m³/h Machine control via LCD 5.7" touch control panel VS-Spark-proof fresh air/recirculation fan: Power: 2.2 kW; Flow rate: 40000 m³/h; Output electrical power: 1.5 kW; Fresh air into the room: 0-4000 m³/h; Installed heating power: 76400 kcal/h PR-Antifreeze for heating register no. 1, with sensor and automatic control of the shut-off valve. 3. Cooling zone CEFLA AIR KNIFE COOLING ZONE (AQUADRY RLA/2) Type: SP-FEV RU Drum cooling tunnel with air knives is very efficient for achieving increased heat exchange due to the high air velocity. The ventilation unit consists of: - Fresh air and recirculation fan: 3 kW; Flow rate: 6000 m³/h - Exhaust fan: 1.5 kW; Flow rate: 6000 m³/h Digital adjustment of the ventilation via touchscreen. The air knives are installed transversely across the entire tunnel area. Air velocity at the air knife outlet max. 32.5 m/sec Overall length: 3000 mm Usable width: 1300 mm Overall width: 1783 mm Usable height of the passage: 80 mm Max. tunnel height: 1780 mm (excluding conveyor) Installed electrical power: 4.5 kW Machine control via LCD 5.7" touch TT 4000 slat conveyor with double chain, steel guides and chrome-plated slats: Bledpfx Aksw H Aw Sstjp 4. Roller conveyor CEFLA TR 3000 Motorized with PVC-coated rollers Length: 3000 mm Photoelectric barrier for thin panels, thickness 4 mm (Changes and errors in technical data as well as prior sale are reserved)

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: I15CIP1350GL, grinding length: 1,350 mm, total width: 700 mm, total length: 2,200 mm, total height: 1,400 mm, grinding width: 90 mm, type of input current: three-phase, input voltage: 400 V, grinding height: 30 mm, grinding spindle motor power: 2,200 W, overall weight: 455 kg, grinding wheel diameter: 150 mm, input frequency: 50 Hz, input current: 3 A, operating speed: 22 mm/s, Equipment: rotational speed infinitely variable, The electronically controlled version of the grinding wheel depth uses a PLC + HMI screen, allowing for precise control of the sharpening process. Bledpfx Aozytw Hektep Sharpening machine motor power: 2.2 kW Grinding wheel diameter: Ø150 mm Grinding wheel peripheral speed, continuously adjustable via the CNC panel: 5 to 22 m/s Grinding wheel depth adjustment, settable via the CNC panel: 0.001–0.05 mm Maximum distance between the magnetic table and the grinding wheel: 30 mm Width of the clamp/magnetic table: 90 mm Feed motor: 0.18 kW Carriage feed speed, electronically adjustable via the CNC panel: 0.5–15 m/min Coolant pump: 0.18 kW Oil pump for lubricating the guides (operating frequency selectable via the CNC panel): 0.18 kW Coolant pump flow rate: 30 l/min Voltage: 400 V Frequency: 50 Hz Weight: 455 kg Maximum sharpening length: 1350 mm Machine width (approx.): 700 mm Machine height (approx.): 1400 mm Machine length (approx.): 2200 mm The grinder is connected to a coolant tank and is equipped with a magnetic screw system for collecting metal chips.

Year of construction: 2013, condition: used, 🥕 Sormac KP-60 Knife Peeler for Carrots For sale: Professional Sormac KP-60 knife peeler for carrots and root vegetables. Industrial machine – very precise peeling, minimal raw material losses. ✔ good condition, fully operational ✔ stainless steel ✔ 230/400 V power supply Blsdpfx Akey Hdb Eetsp ✔ ready for work Price: 58,000 PLN net Location: Szczecin

Condition: new, Ceramic segments for knife grinders (MVM, GOCKEL, REFORM, ILMETEC, ABM etc) mm. 45/50x16x90 and 60/54X22X110 and other size upon request Bljdps Ahpbuefx Aktop

Condition: good (used), machine/vehicle number: 17346, functionality: fully functional, power: 4.78 kW (6.50 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, number of blades: 4, rotational speed (max.): 5,500 rpm, HK 63 combined jointer/thicknesser - Planing width 630 mm, - Cutterhead width 640 mm, - 4-knife cutterhead, - Table length approx. 2100 mm, - Planing height 2-230 mm, - Toothed steel infeed roller, steel outfeed roller, - 2 sliding rollers in the thicknessing table, - Motor 6.5 HP, - Speed 5000 rpm, Blode Ahmy Uopfx Aktop - Feed rate 10 / 16 m/min, - Adjustable fence for the jointer

Condition: used, axle configuration: 2 axles, Schliesing MX 660 Wood chipper on a tandem-axle chassis > Hatz 4L40C diesel engine > Braked tandem-axle chassis > 2 infeed rollers > Only 3,689 operating hours > Year of manufacture: 1994 Blodpfxe Aftn He Aktop Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. will be happy to assist you. You can find more information on our website. Errors and prior sale excepted! = Further information = Year of manufacture: 1994 Payload: 2,900 kg Gross vehicle weight: 2,900 kg Please contact Tobias Ebert for further information.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Technical Specifications * Manufacturer: Wohlenberg Schneidesysteme GmbH * Model: Trim-tec 60 i * Machine Type: Three-knife trimmer * Year of Manufacture: 2007 * Cutting Performance: 500–3,600 stacks/hour * Max. untrimmed format (automatic feed): 320 × 420 mm * Min. trimmed format: 85 × 145 mm * Max. trimmed format: 300 × 400 mm * Product stack height: 5–70 mm * Min. sheet thickness: 2 mm * Max. press platen opening: 100 mm Trimming Dimensions * Front trim: max. 24 mm * Head trim: max. 25 mm * Foot trim: max. 25 mm Bodpfez Rkp Tex Aktolp Condition and Maintenance The machine is currently still in operation and can be inspected and demonstrated while running, by arrangement. The following maintenance measures have been carried out: * New display in 2024 * New batteries in May 2026 Currently, no defects or malfunctions are known.

Condition: used, Year of construction: 2026, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, total width: 2,900 mm, total height: 3,300 mm, Used machine CNC cutter/plotter Cutting area in X and Y: 2,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 3 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function Bodpfeif Ek Rjx Aktelp • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Horizon HT-30 Blodpfx Ajz Ti Dnjktep Used trimmer for cutting three sides in a single pass excellent conditon in production Standard equipment: Untrimmed Book Size: Max: 320 x 235 x 51 mm; Min: 152 x 136 x 1 mm Trimmed Book Size: Max: 305 x 230 x 51 mm; Min: 148 x 134 x 1 mm Capacity: Up to 520 books per hour pressure: Max 8 kN

Year of construction: 2013, condition: used, This machine is used for sharpening circular blades for Eillert slicing machines. The machine is in good working order and ready for use. Bedpfx Aksz H At Ujtolp Please check my other listings.

Condition: used, functionality: unexamined, grinding length: 330 mm, You buy what you see. Stopped working machine a few years ago. Needs cleaning and maintenance Blodpfx Akozk Ewaotep

Condition: like new (used), Year of construction: 2026, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2026-078, working width: 1,600 mm, working height: 100 mm, warranty duration: 6 months, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials.. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) Bsdpjwgc I Rjfx Aktelp The machine is CE certified.

Condition: excellent (used), Year of construction: 2016, Ref: 11131 . 2016 Horizon HT-110 Three Knife Trimmer Excellent condition! Only 196,000 books cut! Inline or offline trimmer capable of rates of up to 4,000 books/hour. Features: The trimmer is simple and easy to operate, with all necessary setup performed through the icon-based touchscreen. Can run at speeds up to 1,600 cycles per hour. Can also reach production speeds up to 4,000 books per hour by stacking up to 3 books at once. Can be run inline as part of the CABS Perfect Binding System, but it can also be run offline as a standalone trimmer. Specification: Untrimmed Book Size (Spine × Fore-edge) * 148 × 105 mm to 410 × 320 mm Finished Book Size (Spine × Fore-edge) * 145 × 103 mm to 366 × 300 mm Trim Width * Fore-edge: 45 mm * Top-Bottom: 30 mm Trim Height Bljdpfx Akozq D Iqetsp (book thickness/spine thickness) * 2 mm to 100 mm Production Speed 400 to 1,600 cycles/hour

Year of construction: 2021, operating hours: 780 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 72661, GUK FA 53/12-4 R6-53 MV X10 + S520 High-capacity paper and outsert folding line. Total sheet counter: 30,157,273 sheets. Sheet format: min. 160 × 210 mm / max. 530 × 1440 mm. Equipment: • R6-53 round pile feeder with L5 control, ultrasonic double-sheet detection, counter and ejection device. • FA 53/12 first folding station with 30 mm combined folding rollers, integrated deflectors and sound-reduction hoods. • ZWT 53/2 intermediate transport with independent motor. • Baumer-HHS XTS2-Xcam E8 camera system. • Water-grooving system with 11 grooving heads and 8 DW 402 valves. • FA 35/4 second folding station for outserts: 4 folding pockets, 3 deflectors and 24 mm rollers. • Minimum fold at second station: 15 mm. • Scoring, perforating and cutting device. • 110 cm inclined roller table and M4 control. • Mobile MV X10 knife-folding unit, belt press and MV-VS vertical stacker. • Configuration for RTA outserts up to 90 panels with dot-glued cover. Blode Ahfkmopfx Aktep • HHS C221 glue system with 5-litre pressure tank and 2 DDL 505 LX valves. • Mobile S520 chute delivery with M4 control. • Stepless speed adjustment. • Electrical supply: 400 V, three-phase, 50 Hz, 32 A fuse. • English-language manual specified in original configuration. Location: Staro Nagoricane, North Macedonia.

Condition: good (used), MBO T500-2/4 folding module + T-500-2-X cross-folding knife unit Machine in very good condition, ready for production. From the original owner. Bjdpjz S Uptsfx Aktelp This is a secondary (cross-folding) module for an MBO folding machine, complete with an additional knife-folding unit. Includes 4 folding cassettes and one cross-folding knife. Equipped with sound-dampening cassettes. Can be connected to virtually any MBO machine model or used as an add-on unit for other machinery. Mounted on casters for easy mobility. Independent control system.