Used Hacker Knife for sale (1,775)

Year of construction: 2021, condition: new, Derryglan Ltd - offer a wide range of industrial washer for every application, food, meat, butcher, bakery, pharma, labs, processors and general industry. Ljdogq N Ezopfx Aansta Washers for Utensils, Crates, Bins, Knife, Tray cleaning applications. JEROS Washers have a specially designed lid which opens fully to allow easy operation and loading without causing backstrain to operators. The special JEROS features provide easy installation of the machines. Even in the smallest production areas. Further, the machine can be used as a sink when not in use as an automatic Utensil Washer. The flush hose The flush hose makes it possible to reuse the wash water e.g. for cleaning the floors. The flush hose can also be mounted on the mixer tap if required. Mixer tap Built-in mixer tap allows washer to be used as a sink with separate drainage. Fulfils the highest hygiene standards Even the most persistent dirt is removed! The fully automatical detergent dispenser ensures the optimum dosage of soap. The powerfull pumps and rotating wash arms provide a brilliant wash result.The end rinse pump guarantees a constant temperature of 85?C during the entire rinse period and sanitisation of the utensils is achieved. An additional advantage of the high temperature rinse is the fast drying of utensils by evaporation, a rinse aid can be automatically added to assist with this process The New Generation The 9100 Series comprises a total of five new models: 9110 / 9115 with rotating wash systems and 9117 / 9120 / 9130 with wash frame system. Inside, the machines have been thoroughly redesigned, focusing on hygiene and easy cleaning. The inside surfaces and rounded to ensure quick and automatic flow of water back to the filter and pumps. Filters, wash arms and wash frames come in electropolished surface finishes leaving the stainless surface completely smooth to prevent dirt from sticking to surfaces of the machine. This makes it easier to clean and maintain the machine Efficiency and optimum hygiene safty, including HACCP, form the base of the JEROS, set of values. Energy saving up to 25 % All the machines are now available with 'i-version' as standard. This means that all machines have water saving rinse nozzles and that both the wash and rinse tanks are isolated, as also the lid is with double wall and isolated. The machines therefore require less operating power, resulting in energy and water savings of up 25 % for all the models. It is also possible now to set the machines to 'auto off', as required, so that they do not have to be left unnecessarily in standby mode if they are not used for prolonged periods of time, etc. Eco wash As standard all models includes an environmentally friendly 'ECO wash' programme for less dirty objects. Pushing 'ECO wash', the machines wash with a reduced wash temperature and use less soap. Still the rinse with 85? C hot water for guarantee of hygienic result New double Micro-Filter: Unique double filtration system, with a progressive micro-fine filter, provides an efficient filtration of the wash water - thus entails a perfect washing result with less soap consumption and minimal water consumption Larger particles are collected in a coarse filter, wereas smaller particles are captured in the self-cleaning micro-fine filter. During the washing/rinse process, the collected particles are drainet out of the micro-fine filter from the bottom, just as well from the surface of water. this ensure a constant optimum wash water quality

Year of construction: 2022, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 3144, Automatic band knife protection Unwinding and winding device Precision knife guide Grinding device with precise guide Wheels with precision ball bearings Quick knife clamping device Excellent cutting quality High-quality workmanship Band knife protection device with electric drive Fully automatic band knife protection device, Electronically continuously adjustable knife speed from 2-30 m/s with digital display Continuously adjustable knife speed LED lighting device Ltsdpfxsvmpu Sj Aanea Precision knife guide below the table top Quick stop device Table surface made of stainless steel Reinforced knife drive 2.7 kW / 2-30 m/s

Condition: used, Year of construction: 2005, Three knife trimmer Kolbus HD 150.B Year: 2005 Description: - Right hand infeed Ltodpfx Aaovf Dtyjnea - Automatic hopper feeder for inline production - Cut counter - Exchangeable cutting tables (standard set) - Knife pre-setting device - Set of knife holders: 2 - Sets of knives: 2

Condition: good (used), functionality: fully functional, Amada mod. Togu-EU sharpening machine with PLC for sharpening punches and dies of punching machines complete with accessories. Lodpfx Ast Daiwjanjta

Condition: ready for operation (used), Newly renovated knife roller conveyor, new chains and gears. Ltedpfx Aasrpkz Eenea Size: 1300x2600 mm Stock no: 99

Condition: good (used), Used TIG welder Messer Griesheim Unitig GW 450 Thyristor AC-DC, German top brand, up to 450 A 60 % ED - 350 A at 100 % ED, water cooling, proven thyristor transformer technology, easy operation, best welding properties before gassing aftergas, forced shutdown, ramp-down, crater filling, any material incl. weldable aluminum, HF ignition, stick electrode welding, 1-6mm, 2-stage-4-stage, 2 currents controllable, balance controller, ammeter, change in aluminum penetration + points, rectangular sine in the range AC Super Alu, weight: 420 kg, TIG welder Messer Griesheim Unitig GW 450 Thyristor is a thyristor unit Ltjdpfx Aaok Sag Ajnsa

Condition: ready for operation (used), Technical characteristics Width 880 mm Ledpfxstx Hxvo Aanota Shaft Ø 350 mm with 2 blades Feed chain Type de recyclageShredder Power and Motors Power: 25 Kw Overall dimensions

Condition: good (used), 4 pieces of circular shear exchange frames including stands and tools (circular blades + stripper rings and spacer rings) Shaft diameter: 140 mm Band width: 1600 mm Price: 10,000.00 EUR / unit Ljdpjw Uqr Sjfx Aaneta

Year of construction: 1998, condition: good (used), Built in: 1998 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm min 100 x 120 x 2 mm Speed: Ltodpfx Aaoga Ditsnoa max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar) 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.)

Year of construction: 2019, condition: ready for operation (used), An industrial knife grinding machine MVM for sharpening woodworking parts is available. Knife length: 6000mm, control: Siemens PLC with remote control. Includes an extraction system, a magnetic table, and a chip filter. Documentation available. An on-site inspection is possible. Lsdpfx Ajw I E Eajanota

Condition: refurbished (used), Year of construction: 2015, operating hours: 3,750 h, functionality: fully functional, power: 294.2 kW (400.00 HP), first registration: 10/2015, overall weight: 22,000 kg, color: red, operation weight: 15,000 kg, tire size: 26,5 x 650, loading space volume: 25 m³, total height: 4,000 mm, maximum speed: 40 km/h, working width: 2,550 mm, Equipment: additional headlights, hydraulic folding, trailer coupling, Greentec 962/20, a chipper combination with a high-tipping hopper with a capacity of 20 m³. Equipped with a Palfinger M70 crane, mounted on a 40 km/h chassis with a tandem axle and a K80 trailer coupling. The drum chipper unit was completely refurbished 500 hours ago with a new, current drum version (weight approx. 2 tons, blade system, 40 mm drum wall thickness, drive train designed for a maximum of 400 hp). All wear parts in the chipper area, as well as the brakes, have been completely replaced. Ideal for collecting material from streets and parking areas; there is space for the traffic control panel at the rear. Tires are in mint condition. Viewing in operation is possible and desired by arrangement! Lsdjwk N Ekjpfx Aanjta

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Built in: 1989 Size: 457 x 292 mm Ltsdpfx Asdyk Rrsansa Speed: 6.000 c/h

Year of construction: 1989, condition: ready for operation (used), Built in 1989 Size max 320 x 400 mm Size trimmed max 305 x 380 mm Size trimmed 100 x 125 mm Ltodpedubvqefx Aansa Product thickness max 80 mm min 6 mm Speed max 6.000 c/h Feeding height max 80 mm Equipment • infeed from the right side • automatic infeed with integrated pre stacker • cut counter • Equipment for sheet-fed • 1 set of clamping plates and holders • 3 sets of cutting sticks • 2 set of knives • external knife changing device • central lubrication • belt delivery

Condition: used, Three knife trimmer semi automatic Input height max 460 x 360 mm Lsdpfjdix Ntex Aanota

Year of construction: 1993, condition: good (used), Built in: 1993 Size: max 350 x 440 mm min 146 x 103 mm Size trimmed: max 310 x 420 mm min 140 x 100 mm Product thickness: max 70 mm min 3 mm Speed: Ltsdpfx Aajdycmdenoa max 6.600 c/h Equipment: • infeed belt • automatic infeed with integrated pre stacker • electronic counter • external knife changing device • 2 set of knives • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table size extensions • 1 set of quick change cassettes standard size • 3 sets of cutting sticks

Year of construction: 1996, condition: good (used), Built in 1996 Size: max 304 x 340 mm min 146 x 103 mm Speed max 7.000 c/h Equipment: • 2 sets of knife holders • 2 set of knives • equipment for changing the format: Ltedpfxedykhfo Aansa • 1 set of pressing plates & holders • 1 set of quick change cassettes standard size

Year of construction: 2004, condition: good (used), Three knife trimmer automatic with integrated pre stacker Built in 2004 Size: max 384 x 340 mm min 140 x 103 mm Size trimmed: max 304 x 310 mm min 136 x 100 mm Book thickness: max 70 mm min 2 mm Speed: max 1.000-7.000 c/h Power requirement: kW 14 kW Ledpfjf Iyb Nox Aaneta Compressed air: 40 Nm³/h bei 6 bar Width: 3.612 mm Depth: 2.950 mm Height: 2.030 mm Weight: 4.000 kg (approx.) Equipment equipment for changing the format: - 1 set of pressing plates & holders - 1 set of size extensions - 1 set of table quick change plates - 3 sets of cutting sticks - 2 set of knives

Year of construction: 1993, condition: good (used), Built in: 1993 Size: 350 x 440 mm Speed: 6.600 c/h Equipment: Ljdpfodym Svex Aansta • right hand infeed equipment for changing the format: • 1 set of pressing plates & holders • 1 set of size extensions • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • info: with cassettes

Condition: good (used), Size: max 460 x 315 mm Size trimmed: max 430 x 300 mm min 80 x 50 mm False opening: max 140 mm Feeding height: max 120 mm Speed: max 1.500 c/h Power requirements: 3 kW (220/380V, 50Hz) Motor: max 220/380 V Motor: 50 Hz Width: 2.050 mm Depth: 2.220 mm Height: 1.615 mm Weight: 2.550 kg (approx.) Equipment: automatic infeed with integrated counter stacker • 1 set of clamp plates & plate holders • 1 set cutting table extension • 1 set cutting table plates • 3 sets of cutting sticks • 2 sets of knives • 1 set of operator manuals • 1 spare part catalogue Ledpfxsd S Svbs Aanjta • standard equipment • 1 set of electrical diagrams • 1 set of standard tools

Condition: reconditioned (used), Size: max 460 x 350 mm, min 70 x 50 mm Speed: max 25 c/min Infeed height: 120 mm Ltodjd Nt E Dspfx Aansa False opening: max 160 mm Speed: kW 7,5 kW Weight: 2.500 kg (approx.) Length: 220 mm Width: 160 mm Height: 200 mm

Condition: good (used), Year of construction: 2007, Format: max 340 x 260 mm; min 90 x 115 mm Format (without overfold): max 340 x 250 mm; min 90 x 115 mm Overfold: max 15 mm Final fold: min 6 mm Pre-fold: min 8 mm Stapling sheet formats: max 340 x 260 mm; min 210 x 155 mm Stitching thickness: max 6 mm Mechanical speed 1:1: max 25,000 t/h Mechanical speed 1:2: max 30,000 t/h Equipment Collecting chain & feeder - 8 stations Collecting chain - 8 Substructure simple - 6 Feeders 416 Ledeqrqxkopfx Aansta - Fabric gluer 423 Stapling station - Stitching station 430 - 15" inch chain pitch - Stitching wire unwinding device - Thickness control / Plus-Minus - 4 stitching heads Three-knife trimmer - Three-knife trimmer 426 Knife - 2 knives Delivery - Stacker Robusto Optional accessories: --- not included in the scope of delivery --- - Crane system - Bar feeder - Print roller feeder - Additional stations - card gluer - various transport lines - compensating stacker - automatic tying machines - Wrapping machines - palletizer

Condition: good (used), Size: max 320 x 384 mm Size trimmed: max 304 x 310 mm, min 70 x 136 mm Speed: max 4.000 c/h, min 1.000 mm Power requirements: 7 kW (220/380V, 50Hz) Air requirement (6 bar): 40 m³/h Width: 3.612 mm Depth: 1.970 mm Height: 2.020 mm Weight: 3.500 kg (approx.) Equipment: • belt feeding • automatic infeed with integrated pre stacker • make-ready system • silicone spraying device Ltjdpfx Aaelwvuxenja • external knife changing device • equipment for changing the format: • 1 set of pressing plates & holders • 1 set of table quick change plates • 3 sets of cutting sticks • 2 set of knives • central lubrication • belt delivery • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of standard tools • 1 spare part catalogue • standard equipment

Condition: good (used), Year of construction: 2002, Built in 2002 Size: max 310 x 400 x 80 mm Size trimmed: max 300 x 388 x 80 mm; min 100 x 120 x 2 mm Speed: max 6.000 c/h Feeding height: max 80 mm Air requirement (6 bar): 30 m³/h Length: 2.300 mm Width: 2.200 mm Height: 2.500 mm Weight: 5.700 kg (approx.) Equipment copilot right hand infeed electronic counter 2 sets of knife holders 2 set of knives Ltsdpfxspgwaus Aanea equipment for changing the format: 1 set of pressing plates & holders 1 set of size extensions 1 set of quick change tables 3 sets of cutting sticks Motorische Formateinstellung automatic setting from: - infeed device - book block pressure - cutting table - side knives - side gauges central lubrication standard accessories

Year of construction: 1997, condition: used, Size: max 460 x 310 x 60 mm; min 125 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Speed: max 6.000 c/h Equipment gathering machine • 16 stations • gatherer ZU 801 Lodpsb Hppfsfx Aaneta controls • missing and double sheet control intermediate elements • spiral raceway • hand fed • jogging element • criss-cross delivery • -connected with perfect binder • 21 clamps • jogging station • milling and roughening station • hotmelt spine gluing unit • hotmelt side gluing unit • premelter • gauzing station • stream cover feeder • cover scoring 2 to 6 lines • cover pressing station • lay down device • shingle conveyor delivery conveyor system • conveyor system ca. 20m • connected with three knife trimmer • conveyor belt to trimmer optionales Equipment:--not included-- • - Opticontrol signature image reader

Condition: used, Size max 220 x 297 mm Speed max 2.700 c/h Equipment • automatic feeder • 4 knives cutting station • edge corner cutting station • delivery Ltodpfoc Rgu Hox Aanea