Used Hacker Knife for sale (1,556)

Condition: new, Year of construction: 2026, functionality: fully functional, Equipment: CE marking, Blanching bath with steam for Salmon pieces. Blanching area 3000 mm. Mesh belt width 600 mm. Fish loading at the entrance (manually) – Water supply from system D – 40 mm. Steam supply 30 mm, 6-8 bar 150gr. Bath with double wall (heated). Lids can be lifted. Two hatches in the side wall. T regulation from 70-95 grC, mesh belt speed adjustable - from the control cabinet Ventilation outlet for the bath 200mm. Cooling in the exit area - cold water from the system. Level overflow. Water level sensor in the bath - for filling the bath. Lsdpfx Aov E Ec Nshtjhk Steam heating - snake. Closed system. Knife at the end of the mesh belt (belt cleaning).

Condition: new, Year of construction: 2026, Motor power: 7.5 kW Ledpfeltmi Sox Ahtohk - Cutting force: 30 tons Cutting channel designed for: - Maximum roll length: 1500 mm - Maximum roll diameter: 1250 mm - Machine weight: approximately 3800 kg - Tank capacity: approximately 110 liters - Hand protection grille in the area of the control panel and on the opposite side - Knife locking mechanism - Straight design slitter table - Documentation: 2 copies in German (1 printed, 1 on USB) - Color: RAL 5012 - light blue Protective grille/knife beam: RAL 1028 - melon yellow Machine in stock, immediately available Price and further information upon request.

Condition: excellent (used), Catalogue number 7953 TECHNICAL DATA - Roller width: 510mm - 3-knife roller - Roller guard - Table length: 2550mm - Cast iron tables - Both tables adjustable - Original angle-adjustable fence Lhodpfx Aozmhb Tohtsk - Motor: 4kW - Brake - Extraction port diameter: 135mm - Dimensions (L/W/H): 2600x1500x1100mm - Weight: 830kg ADVANTAGES – Made in Poland, ŻEFAM brand – 3-knife roller – Brake – Used jointer, in very good condition Net price: 7,900 PLN Net price: 1,880 EUR at an exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 1978, cutting width 38 cm feeding depth 30 cm feeding high max. 10 cm serial no. 2949-003 three knife trimmer Lsdpfozt Szqjx Ahtjhk

Condition: excellent (used), CATALOG NUMBER 7897 Technical data: - inlet width 400mm - inlet height 160mm - shaft width 530mm - shaft diameter 530mm - knife length 530mm Lhjdszmfu Rspfx Ahtok - number of knives 2 pcs - screen dimensions 65x65mm - lower toothed feed roller - lower roller motor 2.2kW - upper toothed feed roller - upper roller motor 2.2kW - belt feeder - feeder belt length 2200mm - feeder belt width 400mm - main motor 45kW - auto-reverse (adjustable) - overall dimensions (L/W/H) 4400x1600x1630mm - weight approx. 3000kg ADVANTAGES – German made – auto-reverse (adjustable) – DTR technical documentation – used shredder, very good condition Net price: 75,900 PLN Net price: 18,070 EUR depending on EUR/PLN rate 4.2 (Prices may change in case of higher fluctuations)

Condition: used, all stainless steel mobile adjustable speed belt width 600 mm Ljdpfx Aozum N Sshtohk with air knife dimensions (l x w x h) : ± 3.250 x 1.000 x 2.000 mm

Condition: new, Year of construction: 2026, The item for sale is a single-shaft shredder equipped with a hydraulic pusher. Brand/Manufacturer: 3E Machinery Model: WT440120 Main motor power: 75 kW Hydraulic system motor power: 5.5 kW Working rotor length: 1200 mm Rotor diameter: 400 mm Number of knives: 70 pcs Dimensions of the movable knife: 40x40x25 mm, fastened with an M12 screw Single row of fixed knives, two-piece, with the option of mounting a second row of fixed knives (upper) depending on the type of waste being processed Lsdpfx Aeq Sp Haehtjhk Top-loading section widened to facilitate feeding waste into the shredder Hydraulic system equipped with an oil cooling system External bearing Inspection flap opened with the screen, assisted by two actuators The machine is available at our warehouse in Częstochowa. Our offer includes not only individual shredding devices; upon request, we can provide a quote for a complete crushing line (conveyor feeding to the crusher, crusher, receiving conveyor with possible metal separation, grinding mill, big-bag station with a transport fan and a two-fraction cyclone). Also available in our offer: Knife mills Two-shaft crushers Four-shaft crushers Washing lines Systems for cable waste Used machines

Condition: new, Year of construction: 2026, Two-Shaft Shredder GL32120 – 30 kW + 30 kW – NEW SHREDDER EQUIPPED WITH HYDRAULIC PRESSURE (PLEASE REFER TO THE ATTACHED TECHNICAL DRAWING OF THE MACHINE) GrabTrade has specialized in the sale of machinery and complete technological solutions for the recycling industry for many years. We are an official representative of 3E Machinery in Poland. We offer new and used shredders, granulators, and complete recycling systems. We offer a new industrial two-shaft shredder, 3E Machinery GL32120, equipped with two independent drives, each with a power of 30 kW. The machine operates at low speed and high torque, making it suitable for demanding industrial applications and the shredding of a wide range of materials. TECHNICAL SPECIFICATIONS: Model: GL32120 Type: Two-shaft shredder Motor power: 30 kW + 30 kW Rotor length: 1,200 mm Rotor diameter: 430 mm Number of knives: 30 pcs. Knife thickness: 40 mm Shredding chamber dimensions: 1,212 × 736 mm Machine dimensions (L × W × H): 3,650 × 1,346 × 2,275 mm Weight: approx. 5,200 kg Control system: Electrical control cabinet with Siemens PLC Condition: Brand new APPLICATIONS: The GL32120 two-shaft shredder can be used for shredding various materials, including: plastics, industrial waste, wood and pallets, electronic waste, barrels and containers, municipal waste, paper and cardboard, metal-containing waste, used tires, and many other materials intended for recycling. The robust design and low-speed, high-torque shredding system make the GL32120 an excellent solution for heavy-duty recycling applications. Lsdpfxjvpua Ss Ahtjhk The modular construction of the shredding chamber provides easy access to the main components for maintenance and servicing. Machine available in our inventory. We provide professional technical advice, commissioning, after-sales service, and full access to spare and wear parts. Complete range of our shredders, granulators, and recycling lines: GrabTrade – shredding and recycling machines.

Condition: used, Year of construction: 2015, operating hours: 10,000 h, functionality: fully functional, machine/vehicle number: 119, inner diameter: 50 mm, cutting length (max.): 4,000 mm, Paper core production line with a packaging system for cores with an ID of 38-60mm, 12 layers for paper reels, multi-knife cutter (5 knives), gluing section with a heating system for dextrin adhesive. Very good condition – recently serviced. A large number of spare parts included. Ljdpfx Ajzul Sfjhtehk

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 04 24446, Folder incl.: Paper format: 760x1100mm Maximum speed: 180m/min 6 cassettes 2 knives 1 side cassette after the knife Pallet loading Lodoztp Axepfx Ahtehk MBO SBAP-82ME stacking press SBAP 46 ME sheet press stacker delivery unit

Condition: used, functionality: fully functional, On offer: FUTURA Krono 220 four-sided planer – 5 spindles, 220 mm The machine is used, has undergone technical inspection, is fully functional, and ready for operation. It can be started and thoroughly inspected at our company's premises before purchase. The machine's greatest advantage is its five-spindle configuration with a fifth rotating spindle that can rotate 360°, providing a wide range of possibilities for planing and profiling wooden components. Separate drive for each spindle, smooth feed speed adjustment, and pneumatic pressure on the rollers ensure stable and precise machining. Specifications: • Manufacturer: FUTURA • Model: Krono 220 • Maximum working width: 220 mm • Maximum working height: 130 mm • Number of spindles: 5 • Spindle arrangement: 4 fixed spindles and a fifth rotating spindle with a 360° range Lodpszhpg Hsfx Ahtehk • Spindle diameter: 40 mm • Spindle motor power: 4 × 4.0 kW and 1 × 5.5 kW • Spindle drive: separate motor for each spindle • Feed motor power: 1.5 kW • Total power: 23.0 kW • Spindle motor brakes • Planing height adjustment: electric • Planing width adjustment: manual • Adjustment of the position of vertical spindles: up-down, similar to an inverted milling machine • Lower feed roller in the work table: 1 • Toothed feed roller before the first head • Pneumatic pressure on feed rollers • Feed speed adjustment: smooth, using a variator • Feed speed range: 6–28 m/min • Equipment: complete set of working heads and a cutterhead • Working heads: 3 spiral heads and 1 four-knife head • Infeed table: 2480 × 250 mm • Table lubrication pump • Soundproof cabin • Extraction ports: Ø140 mm • Year of manufacture: 1996 • Weight: approximately 1600 kg • Overall dimensions: 462 × 160 × 156 cm (L × W × H) • Original paint • Complete documentation in Italian • Head wrenches included • Complies with CE requirements Applications: • Four-sided planing of wooden components • Profiling of components using the fifth rotating spindle • Machining of components up to 220 mm wide • Machining of components up to 130 mm high Additional information: • The photos show the actual condition of the machine offered • Free machine operation training at our company's premises • The price stated in the auction applies to export sales/intra-community supply with a VAT rate of 0%; 23% VAT must be added for domestic sales Financing and transport: • We arrange transport using the MDD fleet or through external carriers • We assist in obtaining leasing or loan financing • Delivery costs depend on the destination and the method of transporting the machine

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Drive system: Conventional Lsdpfszrmvtox Ahtohk Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Year of construction: 1998, condition: used, Built in 1998 Size max 740 x 1.110 mm Equipment: feeder: Lhjdpfxsdmdtbs Ahtjk • continuous feeder • counter 1st folding unit: • 4 buckle plates • polyurethane-steel folding rollers • noise prevention 2nd folding unit: • cross-fold knife • buckle after cross-fold left • polyurethane-steel folding rollers 3rd folding unit: • third-fold knife delivery: • belt delivery

Condition: ready for operation (used), Size max 480 x 320 mm Size untrimmed with lap max 480 x 320 mm Size untrimmed without lap max 440 x 290 mm Size trimmed with lap max 470 x 300 mm Size trimmed without lap max 430 x 295 mm Lodpfx Ahjd Ir Izetjhk min 148 x 75 mm Speed max 10.000 c/h Equipment stitching unit • stitching unit 321 • thickness control/ plus-minus • 2 stitching heads HK 75 three knife trimmer • three knife trimmer 890 knives • 2 sets of knives

Year of construction: 2007, condition: good (used), Technical Data: Size: max 480 x 320 mm Sizes untrimmed high folio lap: max 480 x 320 mm min 105 x 115 mm with Accessories 90 x 80 mm Sizes untrimmed low folio lap: max 480 x 300 mm min 105 x 125 mm Mechanical Speed: 21" chain pitch 14.000 c/h Power consumption: max 11 kW Pressure-vacuum pump depending on configuration Compressed air (to be supplied by purchaser) depending on configuration 6 bar Equipment: Gathering chain & feeder: · 8 Station gathering track Feeders: · 5 Feeders 370 Cover folder feeder: Lhodsmn Sk Nspfx Ahtok · 1 Cover folder feeder 1529 Stitching unit: · 1 Stitching unit 390 · 1 18" inch chain pitch · 1 Transfer right · 1 Wire unwind device · 1 Thickness control/ plus-minus · 1 Oblique sheet control Stitching heads: · 2 Stitching heads HK 75 Three knife trimmer: · 1 Three knife trimmer 449 Knifes: · 2 Sets of knives Standards: · Standard accessories Condition: · working condition Availability: · immediately · Machine can be visited in production Optional equipment (not included!): · additional feeders · double production device · compensating stacker · card gluer · inserting machine · inkjet systems All technical data is for information purposes only! Although the technical information is mostly taken from manufacturers documents, no guarantee can be given for correctness due to e.g. undocumented changes of the equipment. By no means are these values intended to be binding or part of the contract.

Condition: good (used), Size: max 510 x 310 x 60 mm; min 140 x 100 x 3 mm Book block thickness: max 60 mm; min 3 mm Cover size: max 642 mm; min 203 mm Speed: max 12.000 c/h Equipment gathering machine • 18 stations • feeders 3691 • reject gate 3614 controls • miss and double sheet control • ASAC automatic self-adjusting calipers intermediate elements • spiral race away • 3 jogging elements • connected with perfect binder • 21 clamps • milling and roughening station Lodsrgpqcepfx Ahtohk • 2 hot melt spine gluing units • hot melt side gluing unit • 2 premelters • SF stream cover feeder • SF cover nipping and pressing station • smooth lay down device conveyor system • ca. 30 m • connected with three knife trimmer • three knife trimmer MM Zenith 3672 compensating stacker • compensating stacker Müller Martini standards • standard accessories • 1 set of operator manuals • 1 set of electrical diagrams • 1 set of spare part catalogues • 1 set of tools

Condition: used, Year of construction: 2020, operating hours: 10,150 h, functionality: fully functional, machine/vehicle number: W09D20432L1A65405, power: 515 kW (700.20 HP), first registration: 03/2021, fuel type: diesel, color: green, fuel: diesel, Equipment: additional headlights, air conditioning, all wheel drive, cable winch, compressor, cooling unit, crane, fog lights, hydraulics, parking heater, ALBACH DIAMANT 2000 W09D20432L1A65405 Registration year: 03.2021 Engine: VOLVO PENTA 565kW 760hp Rotor: Generation 6 (12-knifes), 120mm sieve Blower: TYPE 4 Accelerator: Generation 2 Crane: Type S110 F, Epsilon Equipped: DAFO vehicle fire suppression system Engine hours: 10152 h Rotor hours: 4405 h Full maintenance and repair history. Technically clean machine, ready for work w/o investments. Lodpfjw Uddnjx Ahtohk

Condition: ready for operation (used), An open copper cheese vat with low material removal and planetary agitator including knife harps and paddles is available. Shape: round, edge material: steel, inner diameter: 2600mm, useful volume: 7000l, outer diameter: 2850mm, height: 2950mm. Cheese mold: 2x4, mold length: 820mm, beam length: 4400mm, whey tub length: 4400mm, total length: 5000mm, width: 1500mm, depth: 900mm. An on-site inspection is possible. The copper was only gently washed. Lhedpfsx Db Uujx Ahtjk

Condition: ready for operation (used), Year of construction: 2007, The Vecoplan VAZ 2000 M F-T is a robust heavy-duty single-shaft shredder manufactured in 2007 for industrial recycling applications. Suitable for plastics, films, wood, paper, cardboard, EBS/RDF, and commercial waste. Formerly part of a production line for LDPE PCR film bales; the production line was modernized and rebuilt in 2024. Successful tests for processing used pallets and cardboard cores have been carried out. The processing of wood and cardboard cores is technically unproblematic. The machine condition has been documented by Vecoplan, and the required spare parts for recommissioning have already been ordered. The sale is due to an internal department closure and the associated restructuring of operational processes. Rotor length approx. 2,000 mm, hydraulic ram for uniform material feeding, flipper/airspring counter-knife system for high operational reliability, Torque/HiTorc drive for high torque and energy-efficient operation, replaceable reversible cutting inserts, suitable for both pre-shredding and secondary shredding, final particle sizes depending on screen and material approx. 10–250 mm, high throughput capacity, and robust, maintenance-friendly design. Inspection possible by appointment. Lhodpfx Ahoy T Hbbetek

Condition: used, machine/vehicle number: 11634, Rotor diameter: 600 mm Rotor width: 1000 mm 6-knife rotor – cross-shear cutting rotor 2 rows of stator knives Infeed opening approx. 650 x 100 mm Drive motor 75 kW Ljdpfx Aheyr Tl Aotjhk Machine features: The cross-shear cutting rotor ensures optimal material intake and distribution, resulting in high throughput with reduced energy consumption. Electro-hydraulic opening of the mill housing and screen basket. The screen insert can be rotated 180° and reused after one-sided wear. Rotor knives can be adjusted outside the mill using a setting device, reducing downtime.

Condition: used, machine/vehicle number: 12768, Rotor diameter: 340 mm Rotor width: 520 mm 4-knife rotor 2 rows of stator knives Infeed opening approx. 340 x 520 mm Lsdpfx Aoyr Tq Ejhtshk Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12677, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor Ledpfjyr Tqlex Ahtohk 2 rows of stator knives Infeed cross-section approx. 600 x 660 mm Drive motor: 30 kW

Condition: ready for operation (used), functionality: fully functional, 1 x Watkiss Nearline Powersquare 224 - booklet-making machine, e.g., for Xerox digital printers / booklet maker Ready for immediate dispatch from our Flensburg warehouse - ideal for streamlined booklet production with Xerox, both on- and off-line. Counters: 1. Books: 1,109,917 2. Sheets: 8,905,801 3. Stitches: 2,735,224 E.g., suitable for: • Xerox iGen family • Xerox Nuvera family • Xerox Color 800i/1000i Presses • Xerox Versant 2100 • Xerox Color 8250 Manufacturer: Watkiss Type: 224 Watkiss PSQ224 Main Body RA Watkiss Bridge Link R4 Watkiss Bridge Frame Cover Watkiss Power Stack 200, Book Stacker Watkiss PBS Care Kit Watkiss PSQ, 2-knife trimmer Watkiss P2T/PBS Interface kit Watkiss P2T/PBS Trim Conveyor kit Watkiss Travel Base The Watkiss PowerSquare 224 is a complete book-making system for digital and offset print applications, available in three configurations – online, nearline, or offline. In a single machine, it combines the four processes of stitching, folding, spine forming, and trimming to produce SquareBack books of up to 224 pages thick. It features fully automatic settings for different book sizes and pagination, including variable stitch-leg length for varying book thicknesses. For inline production, it works with all major digital print engine manufacturers (including Kodak, Canon, Konica Minolta, Xerox, and Ricoh) to deliver seamless booklet-making solutions for production printing. Designed for high production reliability and ease of use, it can handle long runs without any operator intervention. It offers a maximum book thickness of 0.39” (using 50 sheets of 80 g/m2 paper) and provides a single book-making solution for documents from 8 to 224 pages. Duty Cycle: Ljdpewf Rxuefx Ahtjhk • Average volume: 50,000 books per month • Peak volume: 150,000 books per month Frequency: 50 Hz. Books/Booklets printed: 700 (from Xerox Showroom) Installed: June 5, 2015 Availability: available now Video link below Inspection welcome Tested and working – serviced regularly throughout its lifespan and very well maintained. Business-to-business sale only. Inspection welcome in northern Germany. Comes with a manual in English.

Year of construction: 2018, condition: ready for operation (used), An automatic slitter-rewinder Jurmet is available. Total operating distance: approx. 8900km, max. working width: 1600mm, min. parent roll width: 300mm, max. parent roll diameter: 1000mm, parent roll core inside diameter: 76mm/152mm, finished roll core inside diameter: 25.4mm/76mm, max. mechanical speed: 500m/min, max. web tension: 153N, knife positioning accuracy: +/-0.3mm, pressure roller width: 1600mm, max. product weight: 150g/m², max. product thickness: 220µm, operating hours: approx. 9850h. Documentation available. An on-site inspection is possible. Lodjzhnupspfx Ahtjhk

Condition: ready for operation (used), Year of construction: 2007, A complete Weber slicer and packaging line is available. 1) Weber CZB infeed conveyor, year of manufacture: 2007. 2) Weber SCA scanning unit, year of manufacture: 2007. 3) Weber MCS 904 slicer, year of manufacture: 2007, knife type: sickle, max. speed: 2000rpm, slice thickness range: 0.5mm-100mm. 4) Weber inspection and reject unit. 5) Weber CNS transfer station. 6) CFS PowerPak PP 620 thermoforming packaging machine, year of manufacture: 2007, film width range: 320mm-700mm, max. forming depth: 150mm, index length: 800mm. 7) 2x labeling machines. 8) Weber MC-SA-F1040/500/200 tunnel metal detector. This is a complete slicer and packaging line including various molds, heat sealing tools, longitudinal slitter and rewind station. Documentation available. An on-site inspection is possible. Lodpfxozli T Uj Ahtohk