Used Wide Planer for sale (7,310)

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 400 mm Maximum working width 400 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE Hsdpfx Asydk Irjameh

Condition: excellent (used), CATALOG NUMBER 7503 TECHNICAL DATA: - Max. planing width: 610 mm - Max. two-sided planing height: 200 mm - Max. four-sided planing height: 100 mm Top section: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed roller - Pawls - Pressure beam - 2 toothed feed rollers - Pressure beam - 610 mm, 4-knife planing shaft, 7.5 kW - Pressure beam - Smooth metal feed roller - Pressure beam - Profiling shaft, 7.5 kW - Pressure beam - Rubber feed roller Bottom section: - Planing shaft, 35 mm diameter, 130 mm shaft length, 2.2 kW - 2 guide rails - Infeed table - Smooth feed roller - 610 mm, 4-knife planing shaft (equipped with 2 knives), 7.5 kW - 2 smooth feed rollers - Divided metal slip roller - Side pressure roller Rear section: - Side spindles + 2 pressure units - 1) Right vertical 95 mm, 4 kW Hsdpex S Ngksfx Aamsh - 2) Left vertical 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7 / 9 / 11.5 / 14 / 18 / 23 m/min - Feed motor: 3.1 kW - Extraction connector diameters: 3×120 mm, 3x160 mm - Dimensions (L x W x H): 3150 x 1900 x 1600 mm - Weight: approx. 3,500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing beams, flooring, etc. – Additional profiling shaft and planer shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, very good condition Net price: 66,900 PLN Net price: 15,930 EUR (exchange rate: 4.2 EUR) (Prices may change with exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7275 TECHNICAL DATA - Max. planing width: 610 mm - Max. planing height: 200 mm From above: - Toothed feed roller - Kickback pawls - 2 pressure rollers - Toothed feed roller - Pressure roller - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure rollers - Smooth feed roller From below: - Guide bar - Adjustable infeed table with split, smooth sliding shaft - 610 mm planing shaft, 4-knife, 5.5 kW - 2 smooth, powered feed rollers - Side pressure roller At the rear: - Side spindles + 2 pressure rollers: 1) Right vertical spindle, 5.5 kW 2) Left vertical spindle, 5 kW - Max. planing height on side spindles: 200 mm - Spindle diameter: 35 mm - Spindles adjustable up/down, left/right 3) Additional horizontal spindle, 160 mm, adjustable up/down and left/right + tilting, approx. 4 kW - Planing possible with the additional spindle from above/below/side - Spindle diameter: 35 mm - Adjustable rollers on lower table - 2 feed speeds - Feed motor: 2.2 kW - Extraction port diameters: 120 mm - Dimensions (LxWxH): 2550 x 1700 x 1350 mm - Approx. weight: 3,000 kg Hodpfx Aox Sx Sijamjh ADVANTAGES - Wide planer for wet and dry timber - Ideal for processing beams, floorboards, etc. - 2 horizontal planing shafts + 2 vertical spindles + 1 horizontal spindle - Complete with cutterheads - Manufactured by German brand KUPFERMUHLE - Used planer in very good condition - Original photos Net price: 58,900 PLN Net price: 14,020 EUR (based on exchange rate €1 = 4.2 PLN) (Prices may change with significant fluctuations)

Condition: ready for operation (used), Planing machine (four-sided planer) Constant table Maximum planing width: 605 mm Planing height (2-sided): 200 mm Planing height (4-sided): 170 mm Motors Bottom: 7.5 kW Top: 11.0 kW Right vertical: 11.0 kW Left vertical: 11.0 kW 5th spindle: 15.0 kW Feed: 2.4 / 3.0 kW Thickness adjustment: 1.1 kW Planing spindles with 6 knives For feed speeds up to 24 m/min, 3 knives are sufficient During operation, 3 knives work while 3 sharp knives remain in reserve Hodewg S Tvopfx Aameh Additional unit: 5th horizontal working spindle, 11 kW Outfeed unit with roll width: 350 mm Option Pre-planer at machine infeed The machine is sold in the following conditions: A) as is B) repaired C) repaired and with new electrics !! This planer is still in use by the owner until February 2026 !!

Condition: as good as new (ex-display), Year of construction: 2025, Double side planer (Double Surface Planer ) extra wide 610 mm Maximum working width 610 mm Maximum working height 200 mm Heavy cardan feed system Special spike feedsystem Unlike the conventional chain drive systems, this machine employs a patented synchronized transmission system along the four fitting columns. Hedpfex Upt Aox Aameh Electronic height adjustment Spiral cutterheads top and bottom Latest generation IE-3 motors Spindle and feed brakes CE

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with XPLANE cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. Hsdsqlck Nspfx Aamjh upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: Xplane solid steel cutterblock Cutterblock with 3 spiral rows of knives (33 cambered hard metal knives per row), delivery includes full set of knives and a Torx T20 T-wrench; shaft speed 6,000 rpm included; The emission sound pressure level LpA during processing is reduced by 10 dB(A) - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, table surface precision-planed - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at the infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple Hodpfxoqlckpo Aamjh - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1975, functionality: fully functional, planing width: 860 mm, planing height: 310 mm, working width: 860 mm, working height: 750 mm, chip removal: 20 mm, rotational speed (max.): 4,200 rpm, number of planer blades: 4, heavy-duty thickness planer, very well suited for construction timber, etc., constant table height, sturdy roller conveyor with drive in the infeed area, sturdy roller conveyor without drive in the outfeed area Hjdpexfl A Sofx Aameh

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, planing width: 620 mm, planing height: 300 mm, working width: 600 mm, REX SUPERMASTER Year 2003 – SUMA-8/63.WW Machine Number: 22.500 Year of Manufacture: 2003 General Data Hedpfx Aajx E Dv Tomeh Machine type: Planing and profiling machine with chamfering units Total connected load: approx. 222.8 kW Feed speed: 10 – 100 m/min (adjustable, frequency-controlled) Heavy-duty outfeed unit (AZG): 4 rollers, pneumatic roller pressure, universal joint shafts Tools / Units • Planing spindles: Bottom planing spindle: 37 kW Top working spindle: 45 kW Right working spindle: 22 kW Left working spindle: 22 kW • Chamfering units: 4 × chamfering units (AFVo / AFVu, left/right, top/bottom) – each 1.85 kW Speed: approx. 5,600 rpm, height adjustable depending on chamfer width Total number of processing tools: 8 (4 planing/working spindles + 4 chamfering units) Drives Feed unit: approx. 32 kW • Auxiliary motors (individually): Height adjustment (thickness) Width adjustment Chip removal adjustment Machine adjustment Extraction system Individual extraction nozzles Ø 160–200 mm depending on unit Total required extraction capacity: approx. 25,350 m³/h Accessories Various planing heads and tools (see photographic documentation in the appendix) Switch cabinet included The SUPERMASTER series delivers optimal results in the production of high-quality dimensional timber such as structural solid wood (KVH), Duo/Trio beams or glulam. Additionally, machines of the SUPERMASTER series are also used in the production of cross laminated timber (CLT). Thanks to the powerful feed system, large, heavy, wet, frozen as well as small, fine workpieces are processed effortlessly by the SUPERMASTER.

Condition: good (used), functionality: fully functional, Saw bushings DK14 Hodpfxsxq R Rxo Aamoh Saw bushings DK16

Condition: used, Year of construction: 1998, functionality: fully functional, planing height: 250 mm, working width: 410 mm, overall weight: 5,500 kg, Planer REX TIMBERWORK 410x250 mm + 4x chamfers + saw spindle Year of manufacture: 1998 Location: France, Savoie Hedpfx Aowmm Aloamsh

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 10,000 kg, input voltage: 380 V, Equipment: cabin, Lamellar planing machine 310 x 200 mm + saw spindle Hedpfx Aaox Exbdomoh

Condition: ready for operation (used), Kupfermühle KH 30 4-Sided Planer with Additional Horizontal Spindle Unit with Outfeed Unit 4-Sided Universal Planer KUPFERMÜHLE Electrics 400 Volt / 50 Hz ...../58.5 kW Original paint finish Reseda green RAL 6011 Motor power and arrangement in kW: Bottom 7.5 / Top 11.0 / Vertical right 7.5 / Vertical left 11.0 5th shaft bottom 11.0 / feed 7.5 / thicknessing 3.0 Feed speed min/max 5 – 30 m/min Working spindles: 5 units Chip extraction/connection diameters: bottom 200 mm / top 200 mm / right 160 mm / left 160 mm / lower 140 mm Working width min/max 30 mm / 310 mm Working height min/max 2-sided 15 mm / 300 mm Working height min/max 4-sided 15 mm / 180 mm (OPTION 250 or 300 mm) Hsdpfx Asx Ehfcoamsh Key Features: - Constant table height - Right-hand guide fence - Exchangeable planer heads - Jointing devices on top and bottom - Slotted and replaceable table plates for sound insulation - Outfeed unit with 2 driven top rollers and double-guided upper part - Height adjustment synchronized with main machine Machine condition: overhauled and tested, with functional warranty Additional options: - New paint finish - Re-painting - General overhaul - and more

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, 4-side planing machine with constant table high planing width 600 mm planing height 250 mm down 7.5 kW above 7.5 kW right 5,5 kW Hedpfx Aoduw Aqsamoh left 5,5 kW feed hydraulically interchangeable planing heads horizontal wood intensity adjustment electric chip removal down electrically You as a customer can choose in which state the machine should be delivered

Condition: ready for operation (used), planing width: 1,350 mm, planing height: 200 mm, Thickness Planer Manufacturer: REX Model: 1350 Thickness planer with constant table – upper section with cutterhead is height-adjustable Planing width: 1350 mm Planing height: 10 mm – 200 mm 4-knife cutterhead, motor power: 22 kW Feed via conveyor belt Feed motor: 2.2 kW, feed speed approx. 2 – 9 m/min. Thickness setting and positioning control via control panel with digital display Including setting gauge Including hydraulic hand press for knife clamping Hodpoxguf Sofx Aameh Including spare knives Total connected load: approx. 29 kW Weight: approx. 3,500 kg Dimensions: approx. 2300 x 1400 x 2000 mm (LxWxH) + control panel approx. 1000 x 480 x 1200 mm (LxWxH) Transport dimensions: approx. 3200 x 2100 x 2300 mm (LxWxH)

Condition: good (used), Year of construction: 1996, functionality: fully functional, Thickness planer with constant table Working width 1350 mm Feed via transport belt 4-knife cutterhead with inclined knives for pulling cut Thickness adjustment via positioning control with digital display Hsdpfx Aaoxfb N Uomsh

Condition: excellent (used), Year of construction: 2016, Steton 5-head four-sided planer. Steton 5-head four-sided planer. The machine after the review does not require a financial contribution. Technical data: - max width of the workpiece 23 cm - max height 13 cm spindle diameter 40mm - 1 - Horizontal bottom 23 cm - 2 - vertical right 13 cm - 3 - vertical left 13 cm - 4 - horizontal upper 23 cm - 5 - universal 360 degree soundproofing cabin - electric setting of planing thickness - two types of feed speed Hjdpfxei Apuhj Aameh

Year of construction: 1994, condition: excellent (used), 4 side planer 8 8 HARBS heads long table going 3 meters. Machine weight 5500 kg Hjdol Dw Nxepfx Aamjh cardan drive. Head arrangement, bottom horizontal, right vertical, second right vertical, left vertical, top horizontal, bottom horizontal, top horizontal. Upper horizontal. 5.5 kW and 7.5 kW motors. Planing width 230 mm. Planing height 160 mm.

Condition: used, Capacity: 80 m/min Planer feed table, tested. At speeds up to 80 m/min. Hsdpfx Aaog S Dm Nemeh

Condition: new, Year of construction: 2023, functionality: fully functional, CHILLER UNIT 290 kW – 2 separate refrigeration circuits, shell-and-tube heat exchanger, R32 Hedpfxju Au I Tj Aameh Cooling capacity: 290 kW at 7/12°C and 35°C ambient temperature Shell-and-tube evaporator for efficient heat transfer and compact design Low-GWP refrigerant R32 Four compressors in two separate refrigeration circuits for high operational reliability and flexible load distribution Low-noise design thanks to optimized sound insulation Completely framed compressor enclosure for efficient protection, easy maintenance, and reduced noise emission Winter package allowing operation at ambient temperatures down to -20°C Ideally suited for industrial processes.

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, working width: 1,115 mm, TECHNICAL DETAILS Max. working width: 1,115 mm Number of units: 2 pcs. MACHINE DETAILS Voltage: 400 V Fusing: 85 A Power: 41.0 kW Hjdpfxsydv Dxj Aamsh Transport packages: 2 pcs. EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: AB00022255, working height: 250 mm, table length: 520 mm, table width: 900 mm, feed roller diameter: 67 mm, blade shaft diameter: 120 mm, TECHNICAL DETAILS Table dimensions: 520 x 900 mm Working height: max. 250 mm Working height: min. 3 mm Tersa cutterhead: 520 mm with 4 knives Cutterhead diameter: 120 mm Feed roller diameter: 67 mm Feed speed: 5 / 8 / 12 / 18 m/min Hjdpfoydc Ecjx Aameh MACHINE DETAILS Main motor power: 9 kW Weight: 1,058 kg EQUIPMENT Pneumatic table adjustment Electronic thickness table height adjustment via positioning control Tilting fence including auxiliary fence for strips

Condition: good (used), Year of construction: 1997, Manufacturer: Line Type: Seramill 240 Control: NUM 750 Travel X: 6000 mm Hedpfx Aoyf A H Neamjh Travel Y: 2500 mm Travel Z: 950 mm Column spacing: 2400 mm Table: 6000 x 2100 mm Automatic milling head: 2.5° Spindle speed: 3200 rpm Feed rate: 10 m/min Machine weight: approx. 35 tons

Condition: excellent (used), Wide belt sander VIET 211 Working width: 1100 mm Working height: 3–160 mm Number of units: 2 Roller Roller Hodpeyf T Uksfx Aameh Main motor power: 11 kW

Condition: excellent (used), Wide Belt Sander Biesse Levia 110 Working width: 1100 mm Working height: 3-200 mm Number of units: 2 Steel calibrating roller Combi unit with sectional pad Main motor power: 11 kW Feed speed regulated by frequency inverter Optical oscillation Sanding belt: 2150x1120 mm Hsdpfx Aaoyf I Ufjmjh