Used Hand Edge Banding Machine for sale (70,793)

Condition: reconditioned (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Edges thickness in stips / lippings (min/max) mm 0,4 / 1 Panels thickness (min/max) mm 8 / 45 (60) Working width (min/max) mm 236 / 1300 Numerical Control / Software ICOS open (windows XP) Adjustable feeding speed (m/min ) 10 - 50 Without Transmission bar (Master & Slave system) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Hogging Units (2 x Kw 8) EDGE-BANDING PART (for each side): Glueing Unit (EVA-Hot Melt + Quick Melt Unit) 04.1570 + 283.205 Edge coils supporting unit (No. 6 reels) SERVO-DRIVE guillotine shear (cutting the edge/band) Godjyypi Uopfx Ap Dekc Pressure zone (N.C. adjustment) Fine Trimming unit 08.055 (Kw 1 x 2) 0°-30° Profile Scraping unit 08.519 Glue scraping unit 08.50 Buffing unit 08.617-2 (2 x Kw 0,18) Spraying Unit (for polishing liquid) Milling grooving unit 08.190 (1 x Kw 4,5) 0°-90° / 180°-270°

Condition: used, Year of construction: 2003, Single-sided edge trimming and gluing machine Manufacturer: IMA Type: AVM/K/I/G80/822/S3R3L20 Year of manufacture: 2003 For milling, edge gluing, and finishing for a standard groove - only for pre-shaped/pre-grooved doors and square-edged doors Left-hand machine (fixed stop on the left). Complete processing in 3 passes 1st pass: Processing of the top surface of the door (transverse processing) 2nd pass: Door long edge 3rd pass: Door long edge During the 2nd and 3rd passes, the protruding transverse edge from the 1st pass is milled off by using a co-rotating/counter-rotating milling process. Double groove gluing is only possible through modifications to the machine and subsequent manual finishing of the edge. Max. door thickness: - Straight edge: approx. 70 mm - Groove gluing: approx. 60 mm Stable machine frame as a support for aggregates and housing for electrical installation. Drive for feed speeds of approx. 5-25 m/min., mechanically infinitely adjustable. (not to be confused with processing speed) Continuous, plastic-coated strip-type conveyor chain, approx. 80 mm wide, with automatic central lubrication. Manually height-adjustable top pressure with a V-belt 80 mm wide and spring-loaded, ball-bearing guide rollers. Machine length approx. 10,900 mm Infeed table at the machine inlet. 1 horizontal, manually adjustable, unheated stop bar 1 joiner milling unit controllable, not swiveling, without sensing with 2 motors, each 3 kW Gluing unit for optional operation of straight edge or softforming gluing, by changing the glue application. Edge material: - Strips: up to 1.3 mm Godozuykvepfx Ap Dskc - Roll material: 0.4-3 mm - Solid wood strips: 6 mm Strip length max.: 2550 mm Strip height: 14-80 mm (depending on glue application) with: - Side adjustment by hand for the pneumatically controlled glue application. - Height adjustment by hand -15mm downwards and up to +10mm upwards. 1 bell for the main pressure roller, manually adjustable 1 glue application 0.8L, max. edge height 70mm, straight edge with pneumatic quick-release, Chem-Coat coated, electronic temperature control 1 hot melt glue application 0.8L with quick-release, up to max. 80 mm high edge material, soft edge, Chem-Coat coated, with temperature control and control unit for the strip coating 1 automatic Quickmelt hot melt glue feeder with a heating power of 5.0 kW 1 2-fold magazine only for edge material up to 3.0 mm thick, can be manually attached to the single-roll magazine 1 groove forming pressing unit for pressing the edge material into the groove with: - an activation unit 15 kW for re-activating the edge material for groove forming - a pneumatically controlled forming shoe for the underlapping edge - a pneumatically controlled forming shoe for the entire groove - additional post-pressing rollers for the edge areas in the groove - an electro-pneumatic lateral retraction device for the entire pressing unit 1 horizontal adjustment with mechanical digital display 1 trimming unit for 2 motors mounted on the top pressure for trimming the front and rear edge/strip overhang, for trimming cuts flush or with a bevel. 1 milling unit for 2 motors with height sensing, side sensing, for pre-milling from below and above with 2 motors 1kW, 400V, 200Hz, 12,000 RPM, 30° swiveling 1 milling unit for 2 motors with height sensing, side sensing, for fine milling from below and above with 2 motors 660W, 400V, 200Hz, 12,000 RPM, 30° swiveling Note: The technical data and descriptions are copies of the original order

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2650x640x1400 mm Weight 700 kg Total power requirement 5 kw Gkjdpsvz E T Hefx Ap Djc

Condition: used, Year of construction: 2008, power: 5.8 kW (7.89 HP), workpiece height (max.): 50 mm, edge thickness (max.): 3 mm, total height: 1,400 mm, total length: 2,700 mm, total width: 1,000 mm, overall weight: 550 kg, Equipment: CE marking, No. 04542 Edge banding machine HEBROCK Top 2000 Used, year of construction 2008 Max. edge thickness 3 mm Max. workpiece height 50 mm Feed speed approx. 10 m/min Glue pot heating time approx. 5 min Gjdpfx Apszrpnle Dskc Total connected load 5.8 kW Glue application unit with quick-heating glue pot for hot-melt adhesive granules End trimming unit for flush cutting of protruding edge material Combination trimming unit with two motors, 0.37 kW each Four-flute indexable insert cutters for flush, bevel and radius trimming Electronic glue temperature control with digital display Workpiece support with rollers Mobile machine base Transport dimensions approx. 2700 x 1000 x 1400 mm LWH Weight approx. 550 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: new, Edgebanding Machine HOLZ-HER 1308 XL AURIGA POWER -Showroom machine- Innovation: GLUJET GJ725 This offer concerns an equipment package. The following components and options are already included in the price: - Extendable workpiece support - Edge Control PPC 322 W control system - ECO MODE energy-saving mode - Jointing cutting unit FG201 with 2 milling heads - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation - Diamond milling cutter Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation - Edge feed 1903 - Glue application system Glu Jet GJ725 NC PUR PRO - Pressure unit 1912-3 pneumatic - End trimming unit 1918 pneumatic 60 mm - Multifunctional milling unit FR301 MOT6 - Diamond milling cutter Ø 56/60 mm, left-hand rotation - Diamond milling cutter Ø 56/60 mm, right-hand rotation - Corner rounding unit FF301 MOT1 - Scraper unit ZK301 MOT4 incl. high-gloss package - Carbide reversible knives for scraper carrier - Chip collection box for scraper unit - Buffing unit 1940 - Spray device TR301 for infeed and outfeed areas - Motorized pressure bridge adjustment - iTronic-adaptive pressure and glue quantity control - Extended infeed fence 1,252 mm - Motorized adjustment for infeed fence - Pressure unit DW301 with motorized NC axis - Extraction hoods for end trimming unit 1918 - Shelving program Gkodpou R Sy Aofx Ap Dec - Surface scraper FK701 - Spray device GM301 after the pressure unit - new showroom machine -

Year of construction: 2005, condition: ready for operation (used), A single-sided IMA edge processing machine for sizing, edge bonding and post-processing of wood panels is available. Min. workpiece dimensions X/Y/Z: 150mm/130mm/16mm, max. workpiece dimensions X/Y/Z: 2350mm/800mm/40mm, max. workpiece weight: 50kg, workpiece angle: 90°, material: particleboard/MDF, working height: 960mm. This is a complete system with conveying and peripheral units. Documentation available. An on-site inspection is possible. Gjdpfxjzidi So Ap Dskc

Condition: new, Year of construction: 2025, Edge banding unit: Yes Edge thickness: maximum 3 mm Workpiece thickness: from 8 mm - 50 mm Workpiece width: minimum 110 mm Glue pot: Granulate, quick-change pot Trimming cutter: yes Edge trimming / flush cutting: yes Routing station: Chamfer / radius Corner copying: yes Straight pull blade: Yes Radius pull blade: Yes Buffing unit: Yes Non-stick agent spray unit: Yes Infeed fence adjustment: manual Workpiece thickness adjustment: manual Power consumption: 5 kW Machine length: 3314 mm Gkjdek Eai Uepfx Ap Dsc Machine width: 1085 mm Weight: 545 kg

Year of construction: 1995, condition: not inspected (used), Connected load 380V 55A PMS control Pre-milling unit 1961 Gjdjnxkm Ejpfx Ap Djkc Magazine 1901 Glue station 1906 Printing unit 1926K Snipping unit 1916 Flush trimming unit 1962 Profile trimming unit 1966, 3 mm rounding up to 15 mm flush Rounding scraper 1927 Shaping trimming unit 1983 Buffing unit 1941 Extraction 1x160 1x125 mm Compressed air connection 6 bar

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 12 / 60 Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40. Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit 1 x Kw 4,5 Hogging Units KD 11 (2 x Kw 6,6) . Free space EDGE-BANDING PART (for each side): Glueing Unit (P.U.R. Glue + Quick Melt unit) QA 34 (FeMa-Tech) Pressure zone (N.C. adjustment) "A" Edge coils supporting unit (No. of reels) 6 Snipping (end-cutting) unit HL84 (2 x Kw 0,22) 0°-30° Rough Trimming unit (2 x Kw 0,55) Multi-Profile Copying unit by N.C (fine and contour trimming) FK 13 (2 x Kw 0,4) revolver 8+8 Free space Gjdowxwyfspfx Ap Dskc Profile Scraping unit (Multi-profile, by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11 OPTIONAL: Milling grooving unit UF11 (1 x Kw 4)

Condition: used, Holz Her Sprint 1312 FÜ + PU Heavy-duty design – edge thickness 0.4 - 12 mm Gkjdpfx Aox Eilqop Djc PLC screen control Pre-milling unit for application before the gluing section Fully automatic edge magazine for roll and strip material Glue application station for cartridges + PU bonding automatic tracing nozzle Workpiece height 6-55 mm End trimming unit for roll and strip material up to 12 mm edge thickness with adjustment from 0-10° angle of the trimming saws Milling unit, flush milling up to 12 mm, radius milling – bevel milling - 15° motorised - 4 axes Scraper unit for bevels and radii with 2 pneumatically operated scraper holders pneumatic infeed and outfeed Flat scraper unit – finishing Spray device – PU Machine in TOP CONDITION Available from stock Lieboch

Condition: new, Year of construction: 2025, Edge banding machine F5 with PLC control (including 15" touchscreen), hot melt adhesive application to the workpiece for edge banding material up to 3 mm: Joint milling cutter (including DIA tool) up to 2 mm cutting depth, maintenance-free glue pot with interchangeable pot preparation, including adhesive dispensing device, HF milling station with pneumatic Godpjh Hl Ayjfx Ap Dokc milling adjustment, including corner rounding milling cutter, radius trimming knife, edge trimming knife (including pneumatic extraction device), finishing station Joint head Whispercut Combination milling head Radius milling cutter R=2mm Radius corner milling cutter R=2mm Quick-change preparation for corner milling cutter Radius change motor R=1mm Multi-radius trimming knife R1/R2 Chassis Spray device for release agent (PUR) Spray device for cleaning agent (PUR) pneumatic 3-point adjustment LED lighting INCLUDING 2nd interchangeable glue pot max. edge thickness 3mm Workpiece thickness 8-50mm min. workpiece length approx. 160mm Feed speed 10m/min Ready for operation in approx. 3.5 min Dimensions approx. 4300x1300x1400mm LxWxH Weight approx. 900kg Extraction port 1 x 140mm

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 8 / 40 Gedpjuhv R Defx Ap Dekc Working width (min/max) mm 225 / 2500 Numerical Control PC 22 /Software WoodCommander Adjustable feeding speed (m/min) 15 - 40 Safety and sound-proof enclosures/cabins Distance (center-axes) of the Disappearing Dogs (mm) 1000 SIZING PART (for each side): Anti-chipping Milling Unit (1 x Kw 4,5) Hogging Units KD 11 (2 x Kw 6,6) Milling Unit (vertical Joint Trimmers) UF 20/S2 (2 x Kw 4) EDGE-BANDING PART (for each side): Glueing Unit "ZERO JOINT" SCHUGOMA Kantenking (Option: EVA glue/ PU glue) Edge coils support (No 2 reels) Band Pressure zone (adjustable by N.C.) Type A Snipping (end-cutting) HL 84 (2 x kW 0,22), speed 25 m/min Rough Trimming unit BF10 (2 x kW 0,55) Multi Function Unit (Profile contour Trimming unit) FK11 (2 x kW 0,4) Profile edge scraping unit (Multi-profile, adjustable by N.C.) MN 21 Finish processing unit (Glue scraper + Buffing unit) FA 11. Spraying Unit (for polishing liquid) No. 2 Milling grooving unit SF20 (2 x kW 6,6) Motorised panel infeed roller conveyor, with panel identification system "HOMAG" Mod. POWER TBL 100/20/25

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Gedpfxop N D Ngs Ap Djkc Distance (center-axes) of the Disappearing Dogs (mm) 400 SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: used, Year of construction: 1991, The machine has been in operation. The glue tank was overhauled approximately 2 years ago. The pressure rollers should be replaced. The units can be used well as spare parts. Used Manufacturer: Ott Type: Kantomat K 5 Year of manufacture: 1991 Machine no.: K 5200 Granule quick-heating tank Feed rate m/min: 12 / 18 Solid edges up to mm: Edge banding from roll up to mm: 3 Swiveling edge banding unit: Type K 14 Flush trimming Flush radius trimming Radius drawing blade controlled Edge buffing, oscillating Automatic edge magazine Gsdpezkl H Usfx Ap Djkc Large roll support Edge thickness mm: Workpiece height mm min / max: 10 - 60 Workpiece width mm min: 60 Workpiece length mm min: 160 Exhaust connection mm: 160 Space requirement approx. L x W x H mm: 5400x1100x1400 Weight approx. kg: 1800 Total connected load kW: Location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee or warranty.

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (band in rolls) thickness (Min/Max) mm 0,3 - 3 Edges thickness in stips / lippings (min/max) option: mm 20 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 250 / 3000 (ca.) Adjustable feeding speed (m/min) 12 - 40 m/min (ca.) Safety sound-proof enclosures/cabins Distance (center-axes) of Disappearing Dogs (mm) 500 SIZING PART (for each side): Spraying unit (Anti-sticking liquid) Anti-chipping Milling Unit (1 x Kw 4 (ca.)) Hogging Units (2 x Kw 5,8 (ca.)) Milling-Shaping unit 1 x Kw 4 (ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt Glue + Quick Melt system) Edge coils support (No 2 reels) + Band Pressure zone Snipping (end-cutting) unit (2 x Kw 0,35) ca. Rough Trimming unit (2 x Kw 1) ca. Fine Trimming unit (2 x Kw 0,5 ca.) 0°-30° Multi Function Unit (Profile contour Trimming unit) with 2 revolvers (8+8 folds) - max 27 m/min Milling grooving unit 1 x Kw 4 (ca.) (0° - 90°) Gsdpok Nk R Djfx Ap Dokc Profile Scraping unit + Glue scraping unit + Buffing unit

Year of construction: 1998, condition: good (used), I sell the edge banding machine IMA HKA. Godpfjg Dvriox Ap Dekc Suitable for curved shaped edges Good condition, possible to test !

Condition: used, Year of construction: 2021, - Edge joining unit - Teflon-coated gluing unit - Miter saw unit - Multifunction milling unit x-motion PLUS, flush and radius milling unit - Edge processing unit - Radius grooving unit - Polishing unit Edge banding machine Manufacturer: Felder Format4 Type: Tempora60.06LX Year of manufacture: 2021 Technical data Control system: x-motion PLUS Chain feed Feed speed: 10 m/min Drive motor: 0.75 kW (S6) - 1.1 kW (S6) Minimum workpiece length: 140 mm Minimum workpiece width: 70 mm The minimum workpiece width varies depending on the workpiece length, height, and surface texture. Rotary table edge magazine for edge banding material Diameter of the rotary table: 750 mm Edge thickness: 0.4 - 3 mm Pull-out frame Pull-out workpiece support, extendable up to 450 mm Upper pressure bar Manually adjustable workpiece height: 8 - 60 mm Edge feeder for edge banding and strip material Edge joining unit: 2.2 kW, diamond cutter Z2 Speed: 12,000 rpm, 2 x 1.1 kW Teflon-coated gluing unit for 1.5 kg of EVA or PUR granules Ready for use after only 10 minutes of heating time Tool-free quick-change system Pressing unit, pneumatically controlled 1 driven and 2 tapered pressing rollers form the pressing zone Shear cutter for edge banding material, 0.4 - 3 mm thickness Miter saw unit with two high-frequency motors 0.35 kW, 12,000 rpm Pneumatically swiveling 0 - 10 degrees Multifunction milling unit x-motion PLUS, flush and radius milling unit 1 high-frequency motor above and below, 0.75 kW, 12,000 rpm, each with 4 interchangeable cutters Edge processing unit For soft-forming and post-forming workpieces, for processing the end edge with 0.4 - 3.0 mm edge thickness and 10 - 60 mm workpiece height 2-axis motor-controlled radius grooving unit including pneumatic retraction function Polishing unit Above and below Gkjdpfx Apjzuyh Is Dsc Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is non-binding.

Condition: used, Year of construction: 2000, Edge banding machine, single-sided Manufacturer: OTT Type: Pacific V 6-F Year of manufacture: 2000 Technical data: Edge thickness: 0.2 - 6 mm Workpiece thickness: 8 - 42 mm Workpiece width: min. 70 mm Workpiece length: min. 0 mm Feed speed: 12 m/min Electrical connection: 3 x 400 V, 50 Hz Extraction: 2 x 120 mm at 20 m/s Extraction capacity: m³/h Equipment, processing units: Edge trimming 2 x 1.5 kW, 12,000 rpm, 200 Hz two tool-controlled spindles Gluing unit Godpfszuyh Uex Ap Dskc Rapid heating tank with Melt-matic automatic edge magazine with optical monitoring for strip edges in fixed lengths Release agent spraying device Cutting unit 2 x 0.2 kW, 12,000 rpm, 200 Hz automatic pivoting 0 / 3 Flush trimming unit x 0.43 kW, 12,000 rpm, 200 Hz Radius trimming unit R2 - R5 2 x 0.3 kW, 12,000 rpm, 200 Hz 2 quick-change stations for trimming units Corner rounding trimming unit 2 x 0.3 kW, 12,000 rpm, 200 Hz Scraper blade 2 x carbide scrapers Smoothing unit 2 x 0.2 kW, 2,800 rpm, 50 Hz Weight: 2,000 kg Note: The technical data and descriptions are copies of the order confirmation from that time. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 1997, - Edge banding unit - Cutting unit Gjdpfx Apjd Inkto Dskc - Milling unit - Fine milling unit - Scraper blade - Buffing unit

Condition: new, - New -Description:- Top equipment for high productivity in a small space!- Intuitive operation with the eye-S control and 10"large touch screen: HMI Maestro Active Edge,Graphic display of all machining units and theiroperating status, Graphic simulation of machining operations,Control of all machining units, Regulationof glue tank temperature, Assistance functionsfor setting up the machine according to the machining program,Fault diagnosis for quick elimination of simple errors,Statistics on machining parameters, USB connection,Preparation for network connection, Preparation for Industry 4.0with data transmission protocol API REST- Excellent accessibility to the working aggregatesthanks to the large hood that ensures protection and noise reduction- Monoblock construction made of steel ensures high stabilityand rigidity of the machine- Automatic aggregate positioning when changingthe panel thickness- Automatic application of the strip edges with edge magazine(me 35 t s): The strip edges of solid wood areautomatically loaded and synchronized with the panel guide- Panel feed is made by feed chain with rubber glides- Extendable workpiece support- Adjustment of the infeed ruler via spacer platesTechnical data:Dimensions and weightsLength approx. 3314 mmHeight approx. 1300 mmWidth/depth approx. 1085 mmWeight approx. 545 kgflush radius milling unitflush radius milling unit input power 2 x 0,35 kWflush radius milling unit cutter speed 12000 min¯¹flush radius milling unit cutter diameter HM 55.3 mmFlush radius milling unit suction port diameter 2 x 60 mmElectrical dataSupply voltage 400 VMains frequency 50 HzGlue unitGlue tank input power 0,25 kWGlue tank suction port diameter 60 mmGlue tank working temperature 190 °CGlue tank filling quantity 0.8 kgPneumatic connectionOperating pressure 6.5 barAir consumption 470 l/minFeed rateFeed input power 5 kWFeed speed 7 m/minEdgesEdge thickness roll material 0.4 - 3.0 mmEdge thickness strip material - 5.0 mmPre-milling unitPre-milling unit input power 3 kWPre-milling unit diamond cutter diameter 80 mmPre-milling unit material removal ,5 / 2 mmpre-milling unit cutter speed 7200 min¯¹pre-milling unit cutter height 56 mmpre-milling unit exhaust diameter 2 x 80 mmscraper unitradius scraper 2 mmbuffing unitbuffing unit input power 2 x 0,14 kWbuffing unit speed 2800 min¯¹workpieceworkpiece thickness 8 - 50 mmworkpiece width min. 110 mmWorkpiece length min. 120 . 5507235 Godpfxjvwfmlo Ap Dskc

Condition: new, Year of construction: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only attractively priced and space-saving. It also features the equipment you need to process edges perfectly from the start: diamond-tipped joining cutters guarantee excellently prepared workpieces for edge banding. The equipment includes a joining unit (up to 2 mm cutting depth), the top-mounted quick-heating glue tank, a mitre saw, and a combination milling machine. Optionally, the F 2 can also be equipped with a surface scraper blade. Gkjdpfxelht Hzj Ap Dsc Maximum edge thickness: 3 mm Maximum workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: F2 - 10 m/min Edge banding machine F2 next With PLC control (including touchscreen) and hot melt glue application to the workpiece for edge material up to 3 mm; joining cutter (including diamond tool) up to 2 mm cutting depth, maintenance-free glue tank with interchangeable tank provision including glue outlet device, HF mitre saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version), robust chain drive, ball-bearing double roller pressure, viewing window from the back of the machine, pull-out workpiece support, feed rate approx. 10 m/min. F2/10 carriage F2/30 pneumatic 3-point adjustment (radius, bevel, flush milling)

Condition: new, 0 0,4 - 3 mm Gsdpfx Asy Ay Akjp Dekc Workingpiece thickness from to 9 - 60 mm Feed speed stufenlos 8 - 12 m/min. total power requirement 15 kw Dimensions (L/W/H) 4.290 x 840 x 1.690 mm

Condition: excellent (used), Universal DOUBLE-SIDE SIZING & EDGE BANDING MACHINE (for both 1st and 2nd pass) Edges (tape) thickness in rolls (min/max) mm 0,3 - 3 Panels thickness (min/max) mm 10 - 60 Working width (min/max) mm 240 - 2700 Numerical Control PC Base Windows /Software SINITRA Adjustable feeding speed (m/min ) 10 - 40 (INVERTER C.N.) Distance (center-axes) of the Disappearing Dogs (mm) 500 SIZING PART (for each side): Anti-chipping Milling Unit AS 10 (Kw 5,8) pneumatic N° 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Spraying unit (Anti-sticking liquid) Gkedpfxsu Rc Ano Ap Djc EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt + Quick Melt Unit) SP30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) . Edge coils supporting unit (No. 6 reels) Snipping (end-cutting) unit IT 90-X (Kw 0,65 x 2) speed 28m/min. 0 - 25° Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (Kw 1 x 2) 0 - 25° Multi Function Unit (Profile contour Trimming unit) AR 80 (Kw 0, 65 x 2) max speed 25 m/min - ROTAX motors with automatic tool change (tools) Profile Scraping unit (Multi-profile, by N.C.) RB 40 (multiprofile) Glue scraping unit RC 20 + Spraying Unit (for polishing liquid) Buffing unit SZ 30 (Kw 0,37 x 2)

Condition: excellent (used), Double-side Sizing & Edge Banding - First Machine (1st in a line) Gkjdpfxou Rc Hyo Ap Dsc Double side TWIN machine (1 Left Side single machine + 1 Right-side sigle machine) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 100 / 1200 Numerical Control PC base Windows /Software PC / SINTRA Adjustable feeding speed (m/min) 10 - 40 (INVERTER C.N.) SIZING PART (for each side): Spraying unit (Anti-sticking liquid) No. 2 Hogging Units (1 Top + 1 Bottom) DT 10 (Kw 5,8 x 2) Free space EDGE-BANDING PART (for each side): 1° Glueing Unit (Hot Melt Glue + Quick Melt system) SP 30 (High Melt + Edge Control EC 40) 2° Glueing Unit (Thermofusion with hot air) Air Force System Band Pressure zone (N.C. adjustment) Edge coils supporting unit (No. 6 reels) Rough Trimming unit RS 10 (2 x Kw 2) Fine Trimming unit (Multi-profile, by N.C.) RF 40 (2 x Kw 1) 0°-25° No. 1 Milling grooving unit EB 60 (1 x Kw 5) 0°-90°, ISO 30 motor Profile Scraping unit (Multi-profile, by N.C.) RB 40 Glue scraping unit RC 20 Spraying Unit (for polishing liquid) Buffing unit SZ 30 (2 x Kw 0,37)

Condition: excellent (used), Double-side Sizing-Milling & Edge Banding - First (1st) machine in a line Edges (tape) thickness in rolls (min/max) mm 0,3 / 3 Panels thickness (min/max) mm 10 / 60 Working width (min/max) mm 230 / 1600 (ca.) Numerical Control / Software WinEdge Gsdpjl Hydmefx Ap Dskc Adjustable feeding speed (m/min ) 10 - 30 Safety and sound-proof enclosures/cabins SIZING PART (for each side): No. 2 Hogging Units (2 x Kw 5,8 ca.) No. 2 Milling units (2 x Kw 4 ca.) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt glue + Multing Unit) Pressure zone (adjustable by CN) Edge coils supporting unit (No. 6 reels) Rough Trimming unit (2 x Kw 1 ca.) Fine Trimming unit 08.055 (2 x Kw 0,5 ca.) 0°-30° No. 5 Milling grooving units (5 x Kw 4 ca.) Profile Scraping unit Glue scraping unit Spraying Unit (for polishing liquid) Buffing unit + Hot Air Heater (to reactivate the color of plastic tape)