Used Hand Hole Punch for sale (12,362)

Condition: used, Offer 41414 Iodpfxsxhfhmo Ab Iobb Guide unit for punching tool suitable for AMADA type EMK 3612

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven notching and shearing units, forming bracket -Handover: in the current condition as viewed -Punch bracket: as shown in the pictures -Manufacturer: CEWE -Type: PA50-150 -Projection: 150 mm -Dimensions: 275/80/H140 mm -Weight: 10.3 kg Ibedpfx Aev Rlwksb Ieb

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 106882-11, total length: 4,400 mm, total width: 1,700 mm, total height: 2,700 mm, overall weight: 7,000 kg, The drilling process of the deep hole drilling machine utilizes the single-lip drilling method. Drilling Unit Information: - Drilling depth: 200 mm - Min./max. drilling diameter: 1–12 mm based on ST 60 - Number of spindles: 2 - Spindle distance: 200 mm - Spindle drive: 2 x 2.4/4.2 kW - Infinitely variable spindle speed: 1,000–20,000 rpm - Infinitely variable feed rate: 10–25,000 mm/min Ibodpfx Abswh Rp Ej Iob - Rapid traverse: 25,000 mm/min - Slide travel (nominal): 650 mm - Slide width: 460 mm - X-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min - Y-axis slide travel: 200 mm, rapid traverse: 25,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 500 liters - 1x automatic filter, filter performance: 50 l/min - 1x monitoring filter - 2x ELB drilling oil supply lines - 1x flow divider - 1x air cooler with recirculation pump - 1x electrostatic oil mist extraction unit - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic unit/equipment - 1x sump pump - 3x submersible pumps - 1x radial piston pump with remote adjustment: Delivery rate: 1–38 l/min Pump drive: 7.5 kW Spindle Unit: - Motorized spindles with frequency-controlled, infinitely variable speed regulation - Spindle head with connection for tool holder - 2 x tool holders for collet sleeves according to VDI 3208 SE10x60, permanently bolted to the spindle head of the motorized spindle Drill Bushing Carrier: - The drill bushing carrier is positionable via the NC axis - Cast iron design, mounted on linear guideways - W-axis drive via AC servomotor and ball screw with indirect, absolute position measurement system Workpiece Slide: - The workpiece slide is designed as a cross-slide for vertical and horizontal positioning of the workpiece, for mounting clamping plates or special fixtures - Base unit in cast iron design with linear roller guideways - X and Y axes driven by AC servomotors and ball screws - Direct, absolute position measurement systems. Table plate with clamping or alignment grooves Clamping Table with NC rotary indexing device for positioning: - With rotary and swivel axes - Hydraulic clamping in rotary and swivel axes Technical Data: - Swivel range: 270º - Rotary range: 360º - Center height: 25 ± 0.02 - Spindle distance: 200 ± 0.005 - Indexing accuracy: rotary axis ± 15" / swivel axis ± 30" Electrical Equipment Information: - 1x drilling process monitoring - 1x CNC control 840D (Solution Line) Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total rated power: 25 kW Additional Machine Equipment: - 2 x holders for resilient drill bushing holders, arranged on the drill bushing carrier - For max. drilling Ø18 mm.

Condition: used, functionality: fully functional, Year of construction: 2000, sheet thickness steel (max.): 4 mm, cutting length (max.): 225 mm, Boschert Notching Machine Type LB14 Station 1 Fixed angle 90° Cutting length 225x225 mm Adjustable cutting length Iodpfx Aewfymnsb Iebb Cutting capacity 4 mm St40/ 3 mm V2A Station 2 Indentation cutting 100x25 mm Adjustable cutting length Used machine in very good condition Refurbished Built in 2000

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, two-stage pump -Manufacturer: Lukas, hydraulic pump hand pump two-stage pump -Type: ZPH 10/18 -Pressure range: max. 500 bar -Quantity: 1x hand pump available -Dimensions: 800/180/H210 mm -Weight: 10.5 kg Isdpfxjwwqtps Ab Ijbb

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: FAG, hydraulic pump hand pump -Type: ZPH 10/25 -Pressure range: max. 500 bar Ibjdpfxjwwqv Dj Ab Ijb -Quantity: 1x hand pump available -Dimensions: 800/180/H195 mm -Weight: 8.9 kg

Condition: good (used), Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump -Manufacturer: Yale, hydraulic pump hand pump Iodpfx Aowwqxxjb Iobb -Type: HPS-1.7 -Pressure range: max. 700 bar -Tank capacity: 0.7 l -Quantity: 1x hand pump available -Dimensions: 720/200/H170 mm -Weight: 8.5 kg

Condition: good (used), Clamping plate with T slots, T-slot plate, punching table, clamping plate, plate field, -Clamping plate: punching table for hydraulic press, eccentric press -Clamping surface: 700 x 600 mm -Opening: 250/250 mm -Plate height: 205 mm -Dimensions total: 700/600/H205 mm -Weight: 207 kg Ijdow Dccvepfx Ab Iebb

Condition: used, functionality: fully functional, --Punching machine Omes CH85 XS WORKING IN GOOD CONDITION. YEAR 1995. DIMENSIONS: 190X80X185 cm (h), 2100 KG Ibedpfx Ajwn Hygsb Ieb --Punching machine Omes CH70 WORKING IN GOOD CONDITION. DIMENSIONS: 170X80X190 cm (h), 1700 KG

Condition: used, functionality: fully functional, PUNCHING MACHINE FICEP 604 N -Machine dimensions mm approx. 150x65X220 (H) cm, Weight kg 1500 -Power supply voltage 380 V 50 H -Motor power kW 7.5 Isdpfx Abswn Hyts Iobb -Punching force ton 60 -Max. hole of 32 mm executable on a thickness of mm 16 -Max. diameter with large hole equipment (optional) mm 100 -Working height mm 950 -Punch stroke mm From 0 to 40

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism Ijdpfx Aow E H E Rob Isbb - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Hydraulic cylinder: Short-stroke heavy-duty cylinder with hand hydraulic pump -Cylinder: stroke 10 mm -Piston rod: Ø 70 mm Iedowxt Ixjpfx Ab Iebb -Dimensions: cylinder 130 x 42 mm -Transport dimensions: 500/210/H140 mm -Weight: 6.9 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 450 x 450 mm -Depth: 250 mm -Edge: mm Ijdpfob Tl Dnox Ab Iobb -Dimensions: 500/500/H250 mm -Weight: 7 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 1000 x 600 mm Iodpfx Abjb Uhkwe Isbb -Depth: 500 mm -Edge: 14 mm -Price: per piece -Number: 1x available -Dimensions: 1030/630/H500 mm -Weight: 26 kg

Condition: good (used), Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 390 x 285 mm Ijdjb Uhm Iepfx Ab Isbb -Depth: 120 mm -Drain: Ø 52 mm -Faucet: Ø 28 mm -Dimensions: 495/350/H130 mm -Weight: 2.4 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 300 mm -Depth: 150 mm Ibodpfx Absb Uhm Nj Ijb -Edge: 17 mm -Drain: Ø 52 mm -Number: 7x available -Price: per piece -Dimensions: 340/H150 mm -Weight: 2.1 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm Isdpfxob Uhm Te Ab Iebb -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Condition: used, Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm Ibedeb Uhnaepfx Ab Iob -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Condition: used, Hand lever valve, directional control valve, valve, hydraulic valve, pressure valve, valve block -Manufacturer: blb -Type: bm40/5 GU/2XLC A1/3XD1 Ijdpfocblxfox Ab Iobb -Weight: 9 kg

Condition: used, Hand lever shears, hand tin snips, tin snips, sheet metal snips -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm Ibjdpfxechlyfs Ab Ieb -Weight: 10 kg

Condition: used, Punching units, punching unit, punching bracket, punching tool, non-driven clinking and shearing units, forming bracket Iedsd Sf U Sspfx Ab Iobb -Manufacturer: SUPRA -Quantity: 2 pieces -Price per piece -Dimension: 237/35/H140 mm -Weight: 3.9kg

Condition: used, 4-column punching tool, cutting tool, punching tool, punch, punching die, punching punch, -Punching tool with: bending function Isdpfxodxnlfe Ab Ijbb -Admission imensions: 300/205/H445 mm -Weight: 100 kg

Condition: used, 2 column punching tool, separating tool, punching tool, punch, punching die, punching punch, -2 pillars: punching tool -Recording: Ø 40 mm bolt Iodpfx Aedxxrreb Iebb -Dimensions: 300/360/H375 mm -Weight: 130 kg

Condition: used, Punch, hydraulic punch, punching machine, punching device, hole punching machine, row punch, punching unit, multi-head punch, punching system -2 punching -Punch movable: 215 - 2505 mm -for: small punching work Ibedpsfc T Tpefx Ab Isb -Foot switch -Dimensions: 3010/930/H1450 mm -Weight: 570 kg

Condition: used, Die holder, notching tool, punching tool, punch, punching die, punching punch, Ibsdpfx Abeffphhe Iob -Long hole punching tool: 10.5 x 23.5 mm -Stamping dimension: see photo with dimensions -Socket: Ø 30 mm -Dimensions: 230/200/H230 mm -Weight: 18 kg