Used Hand Thread Drill for sale (14,160)

Condition: like new (used), Year of construction: 2020, Donau Flex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Type: Flex 135 High-Speed Radial Drilling Machine Condition: used, very good to like new Year of manufacture: 2020 Stepless speed control Stepless quill feed Threading device Dimensions and travel ranges Tool holder: MK 4 Column diameter mm: 170 Table dimensions mm: 1200 x 600 Number of T-slots: 4 Distance between T-slots mm: 125 Quill stroke mm: 165 Column stroke mm: 450 Drilling capacity in solid steel 60 mm: 35 Bjdpfezza Nxex Aktslp Cast iron 22 mm: 42 Threading steel 60 M 30 Cast iron 22 M 36 AC motor, frequency-controlled kW 4.0 at 100% duty cycle. Speed range: min-1 20 – 3200 Feed, stepless mm/rev: 0.02 – 0.7 Machine light Spindle guard

Condition: used, mileage: 1,38,000 km, power: 110 kW (149.56 HP), first registration: 11/2021, fuel type: diesel, overall weight: 3,000 kg, next inspection (TÜV): 12/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 6, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), parking heater, soot filter, Service booklet available, very clean, electric windows, heated seats, Apple CarPlay, radio, remote control, tarpaulin frame, heated exterior mirrors, etc. Nationwide delivery for 295 EUR + VAT, trailer hitch incl. installation for 790 EUR + VAT, warranty and test drive available upon request. No.: 175 Bljdpfx Ao Aat H Esktjp Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturday from 9:00 a.m. - 11:30 a.m. More vehicles can be found at:

Condition: used, Year of construction: 2008, machine/vehicle number: 30655, overall weight: 5,500 kg, total length: 2,540 mm, total width: 2,290 mm, total height: 2,340 mm, FICEP P51 - CNC PUNCHING & DRILLING MACHINE FOR FLAT BAR AND PLATES | YEAR 2008 | 800 KN The Ficep P51 is a CNC-controlled punching and drilling machine for automated hole processing of flat bar and plates. Punching and drilling run in a single pass with automatic material feed - saving marking, re-clamping and handling on parts with many holes. CONDITION & HANDOVER Used machine from stock, year 2008, serial number 30655. - Condition and function are confirmed during the viewing or upon request. - Viewing possible by arrangement (no demonstration under power). - Service and reconditioning before handover by arrangement. FUNCTION & APPLICATION A hydraulic punching unit and an integrated drilling unit process the workpiece in one pass. A carriage with hydraulic, self-adjusting grippers and ball screw drive positions the material under CNC control (Ficep MINOSSE). Processes: punching, drilling, marking, countersinking and tapping. Typical applications: structural steelwork and connection technology as well as the fabrication of beams, brackets and frame structures with a high share of holes. TECHNICAL DATA - Manufacturer: Ficep | Model: P51 | Year: 2008 | Serial number: 30655 - Machine type: CNC punching and drilling machine - Punching force: 800 kN (approx. 80 t) | Punching units: 1 Bjdpfez Nyvyex Aktslp - Max. punching diameter: 46 mm | Material thickness (punching): 3-25 mm - Drilling units: 1 | Spindle power: 7.5 kW | Max. drilling diameter: 28 mm - Plate width: 100-500 mm | Plate length: from 100 mm, not limited by design thanks to roller conveyors - Workpiece weight: up to 100 kg (standard) / up to 250 kg (reduced positioning) - Travel: X 1,000 mm | Y 500 mm | Positioning speed: 20 m/min - Carriage drive: ball screw | Clamping: hydraulic grippers - Control: Ficep MINOSSE CNC - Frame: one-piece steel C-frame with integrated hydraulic unit, electrics, pneumatics and CNC unit - Machine dimensions (L x W x H): approx. 2,540 x 2,290 x 2,340 mm | Machine weight: approx. 5,500 kg SCOPE OF DELIVERY - 1 x Ficep P51 main machine (one-piece steel C-frame) - 1 x punching unit (800 kN) - 1 x drilling unit (7.5 kW) - 1 x carriage with hydraulic grippers and ball screw drive - 1 x Ficep MINOSSE CNC control unit - 1 x hydraulic unit (integrated in the machine frame) - 1 x safety light curtain LOGISTICS & LOCATION Location: Ulft (Netherlands), close to the German border. Dismantling, transport, installation and commissioning can be carried out by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in reconditioned Ficep structural-steel machinery - from sawing and drilling lines and profile drilling machines to plasma cutting systems. Further Ficep machines on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: used, mileage: 71,299 km, power: 85 kW (115.57 HP), first registration: 09/2020, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: automatic, emission class: euro6, number of seats: 2, total length: 7,274 mm, total width: 2,052 mm, total height: 2,660 mm, loading space length: 4,680 mm, loading space width: 1,800 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), parking heater, soot filter, Iveco Daily 35S12 EA8V HIMATIC High-Roof Maxi Van, 1st owner, 71,000 km, complete service history (Iveco, 2 copies available!) DRIVER'S SEAT CONVERTED TO A COMFORT SEAT WITH SEAT HEATING INSTALLATION OF DRIVER'S SEAT RAIL EXTENSION WHEELBASE 4100 mm 2 WHEEL CHOCKS 00614 PASSENGER SEAT, STANDARD 02181 EXHAUST PIPE IN THE CENTER 02215 WITHOUT WARNING TRIANGLE 04353 WITHOUT REAR WALL INSULATION 05108 HAZARD WARNING LIGHT 05596 1ST AID KIT 06654 AUXILIARY HEATER (HOT WATER) WHEEL ARCH MUD FLAPS 06767 REAR DOORS, 270° OPENING 07196 A/C COMPRESSOR, 170CCM 08623 PARABOLIC SPRINGS 72619 STEERING COLUMN, ADJUSTABLE IN 2 DIRECTIONS 73182 WITHOUT SIDE VEHICLE MARKINGS 75223 SWITCH FOR BODY LIGHTING 75967 MARKET-SPECIFIC SIGN 76104 MANUAL AIR CONDITIONING SYSTEM 76133 WITHOUT MAINTENANCE INDICATOR STANDARD ARMREST DIGITAL RADIO DAB CENTRAL STORAGE COMPARTMENT + USB 481678, dated 21.02.2020 SEAT COVERS FOR DRIVER AND PASSENGER RUBBER FLOOR MATS, FRONT INSTALLATION OF REAR VIEW CAMERA WITH MONITOR FINE DUST STICKER (GREEN) SORTIMO FIT-OUT INSTALLATION OF RIBBED METAL SHEET ON PARTITION GRAB HANDLE ON A-PILLAR Bodpfxo Abvzuo Aktolp etc. Appointments and test drives can be arranged by phone. The information provided on the internet is a non-binding description. It does not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors. Errors and prior sale are subject to change.

Condition: used, mileage: 1,75,000 km, power: 121 kW (164.51 HP), first registration: 04/2024, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 04/2028, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, soot filter, Citroen Jumper 2.2L 160 hp AdBlue. L4 H3. Maxi long + Maxi high. Box van with sliding door. Loading length approx. 4.05m. Loading height approx. 2.15m. Wheelbase approx. 4.05m... AIR CONDITIONING, spare wheel, 3-seater, 6-speed, rear parking sensors, 1 set of wheels extra, wooden floor, side paneling, partition, lashing eyes, electric mirrors, immobilizer, central locking, ABS, ASR, armrest, multifunction steering wheel, cruise control, radio, reversing camera, airbag. =====Timing belt replaced at 153,000 km on 07/26.=====Detailed walkaround of the car // Detailed view of the vehicle: ?v=YE1eB9k__ec =====German registration + 1 owner + clear title===== Price: 12,400 EUR net. Windshield damaged. Bodo Agqi Iepfx Aktelp

Condition: refurbished (used), functionality: fully functional, Hand feeding production Booklet maker, stitching, folding and front edge trimmer, automatic settings to the paper format, min. paper format 230 x 120mm, max. paper format 520 x 350mm, two Hohner 48/5S BDH stitching heads, head and corner stitching possible. Machine is ideal for offline hand feeding booklet maker. Most of the belts and other wear parts were replaced. It is tested and in a good working condition. Bede Afbn Uepfx Aktolp

Condition: used, mileage: 1,39,391 km, power: 125 kW (169.95 HP), first registration: 01/2006, fuel type: diesel, empty load weight: 4,700 kg, maximum load weight: 2,790 kg, overall weight: 7,490 kg, axle configuration: 2 axles, color: blue, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 7,920 mm, loading space length: 6,110 mm, loading space width: 2,484 mm, loading space height: 2,744 mm, Equipment: ABS, Passenger double seat, twin tires, first owner, radio, roof spoiler, vehicle number 3272, manual transmission, 3-seater, roof spoiler, leaf spring air suspension, unladen weight: 4.0 kg, gross vehicle weight: 7,490 kg, tire size: 215/75R 17.5, twin tires on rear axle, spare wheel, EURO3, wooden loading platform, cargo space dimensions L x W x H: 6,110 x 2.4 x 2,744 mm, first owner. For inquiries, please contact or . Subject to errors and prior sale. Blsdpfxe Aggggj Aktjp

Condition: used, mileage: 49,650 km, power: 79 kW (107.41 HP), first registration: 03/2021, fuel type: diesel, overall weight: 2,600 kg, color: red, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 2,600 mm, total width: 2,032 mm, total height: 1,964 mm, Year of construction: 2021, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, For sale is a well-maintained Ford Transit Custom L1 with the popular 2.0-liter diesel engine. * The vehicle is in good condition! * German vehicle * Regularly serviced * Euro 6d standard * First owner * Complete service history. Equipment: Panel van L1 * Air conditioning * Heated windshield * Multifunction steering wheel * Truck registration * Heated exterior mirrors * Electric exterior mirrors * Electric windows * 3 seats * Central locking * and more... Technical data: Permissible total weight: 2600 KG * Unladen weight: 2000 KG Bsdpe Agya Tefx Aktslp * Payload: 600 KG * Towing capacity: 2500 KG Why are we the right choice? Attractive financing through our partner bank. * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair prices * Transfer license plates (5-day/customs registration) usually on the same day * Airport or train station pick-up service All vehicles are professionally detailed and hygienically cleaned! Special features: Disinfection of the interior and ventilation system using ozone cleaning. 2-stage polishing on the exterior * If necessary, paint correction and smart repair. All of our vehicles have also undergone a thorough service. Of course, this includes new fluids, filters and other expenses that you don't need to worry about. Optionally, we can have the vehicle inspected at an independent testing center or workshop of your choice. We hope to have sparked your interest and are available to you around the clock. If you have any questions, comments or special requests, please do not hesitate to contact us! More information and insights into our business philosophy can be found on Special equipment: Cargo area light LED, smoker's package, visibility package 1, windshield wipers with intermittent function, adjustable Additional equipment: Airbag driver side, trailer stabilization program (TSA), audio system: radio with USB and Bluetooth hands-free system, audio/radio remote control on the steering wheel, radio preparation, 4 loudspeakers, FordPass Connect incl. eCall, docking station (MyFord Dock), turn signal integrated into exterior mirror, on-board computer, electronic brake force distribution (EBD), electronic traction control, reinforced generator, rear wing doors without glazing, rear wing doors without glazing (opening angle 180 degrees), heating with recirculation function, body/structure: high-roof standard van, body version: medium-high roof, radiator grille black, radiator grille gray, cargo area partition metal, steering column (steering wheel) height/length adjustable, truck registration, model update, engine 2.0 L - 79 kW TDCi CAT, wheelbase 2933 mm, spare wheel in driving condition, low emissions according to exhaust standard Euro 6d-TEMP, windshield wipers with intermittent function, adjustable, sliding door loading/passenger compartment right, mud flaps front and rear, side protection strips, seat package 4: driver's seat (4-way adjustable) - passenger double seat, fabric, start/stop system, lashing eyes in cargo area, roll stability control (RSC), heat-insulating tinted glass, auxiliary heater electric

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, operating hours: 50 h, power: 1 kW (1.36 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, spindle mount: MK 3, height adjustment type: mechanical, actuation type: electric, rotational speed (min.): 225 rpm, total height: 1,790 mm, throat depth: 293 mm, table width: 360 mm, table length: 514 mm, overall weight: 260 kg, Equipment: CE marking, rotational speed infinitely variable, The pillar drill was hardly used and served only as a backup in case of production downtime. Its condition is very good. The original purchase price was €5,270.00 on October 13, 2022. Blsdpfx Aks Afxahstop

Condition: excellent (used), Year of construction: 2001, Fully functional Bodpo Agirwsfx Aktslp

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, type of input current: AC, total length: 11,850 mm, total height: 4,016 mm, input voltage: 400 V, total width: 3,250 mm, Equipment: documentation/manual, For sale immediately, highest bid wins! Bledpfx Akezvattotop The machine can be inspected while in operation. Included are a spare spindle worth €10,000.00 and a computer with software worth €3,000.00.

Condition: used, mileage: 4,92,500 km, power: 309 kW (420.12 HP), first registration: 09/2018, fuel type: diesel, tire size: 315/70 R 22.5, axle configuration: 6x2, wheelbase: 4,000 mm, fuel: diesel, driver cabin: sleeper cab, emission class: euro6, suspension: steel-air, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, electric window regulation, fridge, parking heater, spoiler, tachograph, = Additional Options and Accessories = - 6x2 - Aluminum fuel tank Bodpj Af Nbyjfx Aktolp - Roof spoiler - Digital tachograph - Lift axle - Air suspension - Radio/CD player - Sun visor = Further Information = Front axle: Tire size: 315/70 R 22.5; Steerable; Tire tread depth left: 30%; Tire tread depth right: 30%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 215/75 R 17.5; Tire tread depth left: 60%; Tire tread depth right: 60%; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R 22.5; Dual tires; Tire tread depth left inner: 30%; Tire tread depth left outer: 30%; Tire tread depth right inner: 30%; Tire tread depth right outer: 30%; Reduction: single reduction; Suspension: Air suspension Unladen weight: 8,830 kg Payload: 15,170 kg GVWR: 24,000 kg Damage: none License plate: YX68EPN

Condition: ready for operation (used), functionality: fully functional, mileage: 53,179 km, power: 55 kW (74.78 HP), first registration: 03/2019, overall weight: 3,500 kg, fuel type: diesel, color: orange, axle configuration: 4x4, maximum load weight: 1,699 kg, empty load weight: 1,900 kg, next inspection (TÜV): 10/2028, fuel: diesel, driver cabin: other, gearing type: hydrostat, emission class: euro5, loading space volume: 1.3 m³, operating hours: 7,381 h, number of seats: 1, number of previous owners: 1, machine/vehicle number: ES1785-2, Equipment: additional headlights, air conditioning, all wheel drive, hydraulics, low noise, soot filter, Hako Citymaster 1600, first owner, in top condition formerly a municipal/authority vehicle registered as a self-propelled working machine (40 km/h) upon request, we will perform a major engine inspection including timing belt, water pump, oil, and filters free of charge at the time of sale. 4297 sweeping operating hours Bljdpfx Aszk Ukisktep 7381 total operating hours 53179 kilometers 4x4 all-wheel drive - hydrostatic all-wheel drive including Kif snowplow, type CM 1600, 1500 mm wide (like new/never seen snow) or alternatively with Kif front sweeper, type CM 1600, 1.300 mm wide, built in 2019 (like new/never seen snow), not shown in the pictures including Gmeiner salt spreader, type Husky 500V FS with support legs (like new/used twice for testing) like-new mixed bristle brush new water spray nozzles external controls for the sweeping material container rearview camera and suction shaft camera sweeping width up to 2270 mm sweeping material container made of stainless steel wheelbase 1600 mm track width 1055 mm fresh water tank 180 liters unladen weight approx. 1900 kg permissible total weight 3500 kg length: 4510 mm / width: 1210 mm / height: 1970 mm driving speed 0-40 km/h working speed 0-24 km/h noise reduction package engine: water-cooled 4-cylinder VW industrial diesel engine fuel tank approx. 60 liters hydrostatic all-wheel drive 2-circuit high-pressure hydraulics, circuit 1 (front) 0–50/0–70 l/min - 225 bar, circuit 2 (rear) 0–20/25/30 l/min - 195 bar hydraulic service brake via foot pedal cabin with air-sprung comfort driver's seat air conditioning / heating water treatment system hydrant connection dosing system other applications possible through additional attachments from HAKO, such as sweepers, snowplows, and lawnmowers (not included in the scope of delivery) errors, changes, and prior sale reserved We sell exclusively according to our general terms and conditions and exclude any warranty. Errors, changes, and prior sale reserved. We are available Monday to Friday from 9:00 a.m. to 5:00 p.m. We are also available on Saturdays by appointment. Telephone appointments can be arranged outside of these opening hours. We will gladly accept your current used equipment/vehicle in part exchange. Sales to commercial enterprises and exporters are given priority; this applies to our entire vehicle stock. The above information is not binding. Errors/changes and prior sale are subject to change!

Condition: new, working width: 1,800 mm, color: red, Year of construction: 2023 Empty weight: 624 kg Required tractor power: 50 hp Blodpo Af S Ncjfx Aktsp

Condition: used, mileage: 3,47,390 km, power: 235 kW (319.51 HP), first registration: 10/2019, fuel type: diesel, number of seats: 33, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, Our internal vehicle number: 1212 ----MAN A21 Lion's City NL 323 Power: 235 kW Emission class: Euro 6 Type: City bus Vehicle class: M3 First registration: 10/2019 Mileage: Original. ----* From the first Austrian owner * Automatic transmission 1/2/3/D/N/R * 32+1 seats * 50 standing places * GORBA destination display, front/side/rear, with control unit * Validator preparation on the first wheel arch and opposite door 2 * Air conditioning * Mechanical folding ramp * Large multi-purpose area – wheelchair / stroller * Convector heater Bjds Af D A Iepfx Aktelp * 1x waste bin * 1x preparation for TFT monitor installation * Sun visor * Vehicle is multicolored: white and red - painted * Advertising wrap - applied * STOP request button display * Grab handles * Storage box above the driver's area ----Excerpt from repair history: * 09/2026: AIR SPRING / ROLL BAG, REAR AXLE, ALL, REPLACED * 08/2026: BRAKE CALIPER DISC BRAKE, REAR AXLE PORTAL, LEFT, REPLACED * 08/2026: BRAKE PADS DISC BRAKE, REAR AXLE, LEFT+RIGHT, REPLACED * 08/2026: ENGINE ENCLOSURE / TRANSMISSION ENCLOSURE, complete, replaced * 09/2024: ALTERNATOR, REPLACED * 04/2024: ENGINE MOUNT, left+right front, engine removed, replaced ----Note: Vehicle is registered - mileage and condition may differ The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right to sell the vehicle in the meantime We refer to our general terms and conditions.

Condition: used, functionality: fully functional, power: 0.75 kW (1.02 HP), input voltage: 380 V, input frequency: 50 Hz, spindle mount: MK 2, actuation type: electric, overall weight: 150 kg, quill stroke: 120 mm, Equipment: type plate available, Gillardon pillar drilling machine Manufacturer: Maschinenfabrik Wilhelm Gillardon II, Bretten i. Baden According to the information on the attached nameplate, the drilling machine is powered by a motor from VEM Elektromotorenwerke Thurm. Electric motor Three-phase asynchronous motor, type KPER 80 K 4 VEM Motors Thurm GmbH, D Zwickau 3 speed ranges via belt drive. Spindle stroke approx. 120 mm, drilling spindle with Morse taper 2, weight approx. 150 kg / approx. 1380 rpm, MK2 drilling column. Power consumption 0.75 kW - mains connection 380 volts, 50 Hz. Good used condition Nameplate present An inspection of the bench drill while it is powered is possible after prior appointment. Bjdpsh N Svlefx Aktslp Price: negotiable Our asking price is €290,-- net, ex works, plus packaging costs. All technical data is subject to typographical errors and omissions. Sale exclusively to countries within the EU.

Condition: used, machine/vehicle number: 006500, Position 1: Vertical Storage Systems PRIESS-BMA DLS-CNC Position 2: CNC for Flexible Drilling PRIESS-BMA DLS-CNC Position 3: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 4: CNC Flexible Drilling & Inserting PRIESS-BMA DLS-CNC Position 5: Brushing Machines PRIESS-BMA DLS-CNC Bedpfxez I Rfzj Aktslp Position 6: Roller Conveyors PRIESS-BMA DLS-CNC

Condition: new, travel distance X-axis: 4,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 2,500 mm, table load: 20,000 kg, spindle speed (max.): 6,000 rpm, table length: 2,195 mm, table width: 2,195 mm, rapid traverse X-axis: 30,000 m/min, rapid traverse Y-axis: 30,000 m/min, rapid traverse Z-axis: 30,000 m/min, position of the milling head: Universal-Diagonal-Fräskopf, Equipment: rotational speed infinitely variable, The LAGUN TL 4 is a highly stable, T-frame machining center with a large rotary table and a large working area. It offers maximum flexibility and is ideal for the precise machining of large and complex workpieces. Its advantages: ✔ Delivery and commissioning by JMT technicians ✔ Technical support and on-site service in Germany ✔ Training and instruction of operating personnel ✔ Flexible financing options: leasing or hire purchase Technical features: Control system: • HEIDENHAIN TNC 7 digital path control • HEIDENHAIN 24" TFT screen • HEIDENHAIN motors and measuring systems • HEIDENHAIN electronic handwheel HR 510 Cooling: Internal coolant supply (ICS) 36 bar Tool changer: 60-position drum magazine with dual gripper Chip removal: Double-hinged belt conveyor (front and rear) Enclosure: Full enclosure (perimeter) Bodpjq I Nlyjfx Aktelp Accuracy: Positioning accuracy: ± 0.020 mm Repeatability: ± 0.008 mm Contact us; we will be happy to advise you and create a customized offer.

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Bljdsvutw Hopfx Aktjp Location: from stock 54634 Bitburg - available at short notice -

Condition: used, Year of construction: 2018, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 58281, working width: 1,700 mm, input voltage: 400 V, working length: 2,200 mm, number of slots in tool magazine: 18, control type: CNC control, Rittal Perforex BC 1007 HS CNC drilling and milling centre for automated machining of enclosures and flat panels: cut-outs, holes and threads straight from EPLAN Pro Panel / DXF. Built 2018 in Germany. Machine no. 58281, Rittal part no. 4050.107. Specification: - Clampable flat panels (W x H): 2450 x 1700 mm - Max machinable panel area: 2200 x 1700 mm - Clampable enclosures (W x H x D): 1400 x 1600 x 1600 mm - Max machinable area, enclosures: 1200 x 1600 mm - Tool holder: pick-up system, 18 positions - Control: 4-axis CNC, Rittal OptiPanel, 15" monitor - Electrical supply: 400 V, 3-phase, 50 Hz, 32 A max - Control voltage: 24 V DC - Footprint (W x H x D): 4390 x 2410 x 2720 mm - Transport size (W x H x D): 3800 x 2300 x 2500 mm Bledpfe Ahq D Hex Aktjp - Weight: approx. 2,300 kg Key features: - Enclosure (cube) and flat-panel machining - Pressure plate with swarf extraction - High-performance spindle, minimum-quantity lubrication - Automatic tool breakage check - Pneumatic clamping, DIN tooling - Machines mild steel, stainless, aluminium, copper and plastics - Direct import from EPLAN Pro Panel, DXF import Supplied with: - Safety guarding with light curtains - Operator console and keyboard - Tool magazine with tooling - Rear enclosure-machining bay - Control cabinet - Operator documentation Specification from Rittal published data for the BC 1007 HS; buyer to verify configuration on inspection. Viewing by appointment in Sunderland, UK. Buyer to arrange disconnection and collection unless agreed.

Condition: good (used), functionality: fully functional, rotational speed (max.): 1,400 rpm, rotational speed (min.): 32 rpm, throat depth: 355 mm, overall weight: 1,700 kg, drilling capacity: 50 mm, For sale: 1 used pillar drilling machine Blsdpfovytw Dsx Aktep Manufacturer: WMW Saalfeld Type: BK50 AI Drilling capacity in steel: 50mm Thrust: 355mm Spindle mount: MK5 Speed: 32 - 1,400 rpm Table size: 770 x 640mm Clamping surface: 630 x 550mm Base plate: 490 x 530mm Machine weight: 1.7t The machine can be viewed in our warehouse in 09599 Freiberg.

Condition: used, Year of construction: 1997, Second-hand machine Year of manufacture: 1997 Features and technical specifications: - Number of drilling spindles: 21, spaced at 32 mm intervals - Drilling direction: Bottom & end face - Swivel range: 0–90 degrees via handwheel - Pneumatic workpiece clamps: 3 pcs. - Opening: Max. 100 mm in height and max. 640 mm in width - Motor: 1.5 kW - Extraction diameter: 120 mm - Includes a wide range of stops (see pictures) Blodpfx Ajzn Ah Rektsp Availability: at short notice Storage location: 63934 Röllbach

Condition: new, Alzmetall Alzstar 40/SV pillar drilling machine Manufacturer: Alzmetall Blsdpfx Akey S Artetjp Type: Alzstar 40/SV Condition: new Technical data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Distance spindle-table (min./max.): 117 / 701 mm 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Thrust (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, functionality: fully functional, Equipment: lighting, Alzmetall AB 40 iTRONIC 70-4000rpm pillar drill Condition: new Drilling capacity steel E335 (ST 60): 50 mm Thread cutting steel: E335 (ST 60): M 30 Spindle mount: MK 4 Spindle stroke: 160 mm Throw: 300 mm Column diameter: 145 mm Spindle speed L rpm: 70 – 4,000 Power: 1.8 / 2.9 KW Equipment: 7" TFT - LCD display with touch function Thread cutting device Infinitely variable speed setting Automatic speed control Spindle protection Three separate buttons for clockwise - counterclockwise - stop Mushroom push button Main switch Clockwise and counterclockwise rotation Control voltage 24 volts Protection class IP 54 Motor insulation class "F" (155°) Painting Bsdpfx Akey S Aryotjlp Electromagnetic feed overload protection Machine oil initial filling Equipment options: - Alzmetall option no. 12 LED machine light - Alzmetall option no. 20.4 Comfort grip switch - Alzmetall option no. 20.5 Foot switch - Alzmetall option no. 24 Coolant device A - Alzmetall option no. 37.3 Automatic drilling depth control - Alzmetall option no. 37.5 Technology computer - Alzmetall option no. 37.6 Maximum drilling depth display - Alzmetall option no. 38.1 Automatic spindle stop - Alzmetall option no. 38.2 Workpiece counter / spindle hour counter - Alzmetall option no. 50.6 Drilling depth fine adjustment 0.1mm

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast EN-GJL-200 (GG20) M 20 Bjdpfx Asy S Ar Hektslp Short spindle MK 3 Spindle stroke 140 mm Thrust 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Distance spindle-table min./max. 132/724 mm Feed manual Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive continuously variable Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300