Used Hardness Rockwell for sale (1,460)

Condition: new, functionality: fully functional, color: other, Year of construction: 2025, CONSTMACH twin-shaft concrete mixers are industrial mixing systems that combine high efficiency and durability. Thanks to their robust chassis structure, powerful twin-shaft mixing mechanism, and optimized paddle arrangement, they homogenously blend all aggregate, water, and cement mixtures. This allows for the production of high-strength concrete with a low water/cement ratio while minimizing mixing time. The mixer's spiral mixing system directs aggregates towards the center, ensuring complete uniformity and enabling the production of concrete of consistent quality in every batch. Its twin-shaft design maintains fluidity even in highly viscous mixtures, delivering superior performance in heavy-duty applications such as precast, block, and dam concrete. All models are equipped with modern safety and maintenance features, including an automatic lubrication system, maintenance covers with safety sensors, and a hydraulic discharge cover. Twin-Shaft Concrete Mixer Technical Specifications MODEL NO: CTS-1 Loading Volume: 1,500 liters Fresh Concrete Volume: 1,250 liters Compacted Concrete Volume: 1,000 liters Engine Power: 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 15 mm Ni Hard Mixing Arm Wear Plates: 25 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-2 Loading Capacity: 3,000 liters Fresh Concrete Volume: 2,500 liters Compacted Concrete Volume: 2,000 liters Engine Power: 2 x 37 kW Side Body Wear Plates: 15 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-3 Loading Volume: 4,500 liters Fresh Concrete Volume: 3,750 liters Compacted Concrete Volume: 3,000 liters Engine Power: 2 x 55 kW Side Body Wear Plates: 20 mm Hardox Main Body Wear Plates: 20 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-4 Loading Volume: 6,000 liters Fresh Concrete Volume: 5,000 liters Compacted Concrete Volume: 4,000 liters Engine Power: 2 x 75 kW Side Body Wear Plates: 25 mm Ni-Hard Main Body Wear Plates: 25 mm Ni-Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Safety Sensor Maintenance Cover: Available MODEL NO: CTS-5 Loading Volume: 7,500 liters Fresh Concrete Volume: 6,250 liters Compacted Concrete Volume: 5,000 liters Engine Power: 2 x 90 kW Side Body Wear Plates: 25 mm Ni Hard Main Body Wear Plates: 30 mm Ni Hard Mixing Arm Wear Plates: 30 mm Ni-Hard Automatic Lubrication System: Available Hydraulic Discharge Cover: Available Iijdjxpi Utopfx Aabsh Safety Sensor Maintenance Cover: Available

Condition: new, These are PDC drill bits (Polycrystalline Diamond Compact) from Baker Hughes (USA), used for oil, gas, geothermal, and water well drilling. 🔧 Function • Cut rock formations with synthetic diamond cutters (shearing, not crushing). • Drilling fluid cools cutters, removes cuttings, and reduces wear. 🛠 Advantages • Durable in hard/abrasive formations • Faster drilling (higher ROP) • Stable & efficient with technologies like Zenith cutters, CFD hydraulics, LMM, Quantec Force designs 🏭 Applications • Oil & gas rigs • Geothermal wells Ijdpfow R Ikwex Aabeih • Exploration in tough formations 👉 In short: High-performance drill bits for efficient, durable drilling in extreme conditions.

Condition: new, Year of construction: 2023, The long boom mounted demolition shear is a hydraulically powered demolition tool designed specifically for demolition of tall buildings or hard-to-reach structures. These shears are usually mounted on long boom excavators and their powerful cutting capabilities facilitate demolition operations by cutting concrete, steel and other solid materials quickly and efficiently. Iijdpfsqd Rbwex Aabeh

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: MC-100, turning length: 350 mm, turning diameter over cross slide: 380 mm, turning diameter: 350 mm, spindle motor power: 12,000 W, spindle speed (min.): 50 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 50 mm, Hard Turning Lathe High precision accuracy 0.0001mm Hydrostatic technology Ijdpfx Aajvl S Dyebeih Spindle runout 0.15μm X/Z axis positioning accuracy 1μm X/Z axis repeated positioning accuracy 0.2μm System resolution 0.01μm Quality Guaranteed

Condition: used, Year of construction: 2017, overall weight: 512 kg, total width: 1,400 mm, total length: 1,400 mm, total height: 2,660 mm, type of input current: three-phase, negative pressure: 4,600 Pa, filter area: 14 m², suction capacity: 2,655 m³/h, Dust extraction unit, RINGLER/Karcher Group brand, self-cleaning vacuum filter, extractor and dedusting system designed for efficient extraction of graphite, metallic, mineral dusts, hard fibers, flammable, hazardous, toxic substances, and for process dust collection during sandblasting, soda blasting, grinding, polishing, and all types of dry dust. The vacuum fan is positioned after the filter on the clean air side, minimizing the risk of explosion. Brand: Ringler / Karcher Group Model: RE201 D5.5 IE3 Pocket filter cartridge – multi-pocket Fan power: 5.5 kW Capacity: 2655 m3/h Vacuum: 4600 Pa Filter surface: 14 m2 Inlet diameter: 180 mm / 125 mm Electromotorized filter cleaning Ijdpoxn Rgusfx Aabjih Device in very good condition. Warehouse No.: 1051

Condition: excellent (used), Manufacturer: Hoppmann Type: FT15-2L SS Stainless steel hopper. Adjustable, heavy-duty dosing tool frame Teflon hard coating, anodized aluminum bowl Polycarbonate coverings Dual motor drive system + linear feeding belt 1300 mm Overall diameter: 584.0 mm Iijdpfx Aeh Nyctjabjh Overall height: 405 ± 25 mm Bowl emptying height: 324 ± 25 mm Bowl inner diameter: 406.0 mm

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Iodjxpngbopfx Aabeih

Year of construction: 2025, condition: new, Roller Conveyor Shotblasting Machine Sheet, Profile and Finished Metal Product Blasting Machine: It consists of Cabin, Turbine System, Conveyor System, Recycling System, Filtration System, Control Panel and Platform. Roller Conveyor Blasting Machines consist of Metal Sheet Shot Blasting Machines, Profile Shot Blasting Machines. Material is sent to the cabin on specially manufactured roller conveyor. The surface cleaned material is ready for the next process (painting, coating, etc.) at the cabin exit. It is used in sheet, NPI, NPU, Profile blasting processes. Isdpfovnrr Aox Aabjih Ideal for rusting, roughening and cleaning before painting. The cabin is made of ST-37 sheet metal and blasting zone is supported by manganese wear plates. Hardox sheets have been added to the parts of the leggings that are close to the blasting zone. The wear plate cladding is screw-in design for future wear-based replacements. The side wear plate, top wear plate, front and rear wear plates, blades, impeller, control cage, steel shot feeding elbow of the turbines on the machine are made of Ni-Hard cast iron chemical composition. CODE W x H(mm) TURBINE SK - 1 1.000 x 500 4 x Ø 300 SK - 2 1.500 x 500 6 x Ø 300 SK - 3 1.500 x 1000 6 x Ø 400 SK - 4 2.000 x 500 8 x Ø 400 SK - 5 2.000 x 1000 8 x Ø 400 SK - 6 2.000 x 1.500 10 x Ø 400 SK - 7 2.500 x 1.000 12 x Ø 400 SK - 8 3.000 x 1000 16 x Ø 400 SK - 9 3,000 x 1.500 16 x Ø 400 SK - 10 4.000 x 2000 22 x Ø 400

Condition: new, CAT350 Marble Bucket The Galen marble bucket is a specialized attachment used in the mining and extraction of marble, designed to handle the unique characteristics of this natural stone. Its construction typically includes features that minimize wear and tear, utilizing materials and engineering tailored to the hardness and abrasiveness of marble to ensure efficient excavation and prolonged bucket life. Iisdpfxjn Tm Ekj Aabsh For detailed information please contact us

Condition: used, Year of construction: 2018, Used machine Year of manufacture 2018 Basic equipment Electric height and tilt adjustment 0-46° with automatic cutting height correction when tilting Control at eye level, pivoting Double sliding table, table length 3,000 mm Parallel stop, manually adjustable via scale, including manual fine adjustment Cutting width 1,000 mm Angle stop with fixed 90° position, manually adjustable via scale up to 3,200 mm Max. sawblade projection 150 mm Max. sawblade diameter 450 mm Drive power 4 kW (5.5 HP) at 4,000 rpm AKE tool clamping system for the main sawblade Working height 91 cm Productivity package Motor 5.5 kW (7.5 HP) with VARIO F45 - Continuously variable speed control from 2000 - 6000 rpm - Precise speed adjustment to the material increases cutting quality and sawblade service life. Extended cutting height for one-sided tilting This option is equipped with a large extraction hood for a max. sawblade diameter of 550 mm and a max. sawblade projection of 204 mm for one-sided tilting. In combination with a scoring unit, the max. sawblade diameter is 500 mm or 179 mm cutting height. Only in conjunction with a minimum drive power of 5.5 kW (7.5 HP). Two-sided tilting! RAPIDO Plus 3-Axis Scoring Unit With electric height and lateral adjustment, programmable scoring blade height with quick lowering and quick raising, drive motor 0.75 kW (1 HP), 8200 rpm. Retrofitting only possible on machines prepared for a scoring unit. LED Lighting With particularly energy-efficient LED technology, the danger area of the scoring unit is clearly marked. Sliding Table with a Carriage Length of 3000 mm Basic Equipment Ijdpfx Aasxppv Rsbjih Sliding Table with a Carriage Length of 3000 mm The Altendorf sliding table is famous for its smooth and precise operation. It can be infinitely locked in any position. The large double rollers, precision-machined from hardened steel, hold the upper carriage in connection with the lower carriage with absolute precision in the respective hard-chrome-plated guide rods. This running quality is maintained even after decades of use and contamination. The carriage is designed as an extremely torsion-resistant and dimensionally rigid multi-cavity system. The table surface is precisely planed and anodized. A hard-chrome-plated round bar, which is positively embedded in the upper carriage, serves as a mount for the cross slide and as an interface for various accessories. The entire unit is low-maintenance and requires no lubrication. DIGIT-L Angle Miter Stop, Cutting to Lengths up to 3500 mm This ALTENDORF-patented stop with integrated length compensation facilitates precise cutting of angles and miters in one function. In both positions, the swivel angle is continuously adjustable by 49° and is digitally displayed. The play-free and robust stop flaps can be easily moved and adjusted as individual flaps over the entire range up to a maximum of 3500 mm. For cutting to lengths up to approx. 1700 mm, the roller-supported, stable telescopic

Condition: excellent (used), REMS TORNADO 2010 THREADER Product description: - Reliable, highly efficient machine for threading, cutting, deburring, threading of nipples, rolling - For installations, locksmiths, production plants - Strong, compact, adjustable design suitable for construction sites and workshops - Operating principle: rotating material - stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large workspace and chip container - Adjustable material support - Extremely strong and fast drive e.g.: 2” thread only 15s - Completely maintenance-free gear in a closed oil bath - Two base versions: - portable version on 3 legs, with a removable, large oil tray and chip bowl - T version with a combined, larger oil tray and chip container, for installation on table. A fixed base or a trolley with space for putting away the material, for easy transport, with an optimal working height, stable, as additionally paid equipment - Three high-performance motors to choose from: - a high-performance universal motor, 1700 W, overload protection, rotation speed 53 1/min. - a capacitor motor 2100 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - a three-phase motor, 2000 W, overload protection. Two rotation speeds 52 and 26 1/min., also under full load. Very quiet operation. - A convenient two-stage foot safety switch with an emergency button, thanks to which the entire body weight is loaded during work - Two automatic clamping holders with self-centering clamping jaws. Quickly and easily clamp and release the material - Self-clamping chucks ensure maximum clamping force - Strong, reliable pump with high delivery capacity - Optimum multi-sided guidance of the threading agent through the die head exactly to the threading location guarantees clean threads and long service life of the die dies, gear and motor - Only one automatic universal die head for all threads, also long ones; automatically opening - with automatic thread length for tapered threads - Fast, easy adjustment of the thread size - Clear thread scale - Easy and quick change of the die dies thanks to their positioning in the clamping part - Reliable, indestructible, high-quality REMS die dies with optimum geometry guarantee very easy entry into the material, easy threading and clean threads. They are made of load-bearing, specially hardened steel for an exceptionally long service life. - Self-centering pipe cutter. Sturdy frame made of forged steel. Ergonomic, wide handle for strong spindle pressure Iisdpfxev T Trus Aabjh - Specially hardened cutting wheel made of reliable, tough-hard knife steel ensures long service life. - Internal deburrer, Stable, easy-to-use deburring device with variable deburring position. - Specially hardened and machined blade guarantees easy deburring and exceptionally long service life - Two blades for optimum deburring, especially with small pipe diameters

Condition: used, Year of construction: 2007, machine/vehicle number: 134418, measuring range X-axis: 1,200 mm, measuring range Y-axis: 1,800 mm, measuring range Z-axis: 1,000 mm, Equipment: type plate available, Technical Data Manufacturer: Zeiss Type: Accura 12/18/10 Iodoxnruaepfx Aabeih S/N: 13418 Year of manufacture: 2007 Measuring Plate Hard stone measuring plate Width: 2,400 mm Depth: 1,700 mm Height: 400 mm Measuring Range X-axis: 1,200 mm Y-axis: 1,800 mm Z-axis: 1,000 mm Accessories Control panel PC unit 2 x 27" monitors, brand BenQ Keyboard Mouse Accessories Stored in a two-door metal cabinet Price: on request! Note: Our offer is aimed exclusively at professional customers. (Subject to change and error in technical data, details and prices as well as prior sale!)

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening during reverse tipping, side walls pendulum-mounted and foldable, side drop sides with spring relief, platform floor made of 4 mm fine-grained steel, 8 heavy-duty recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, stepless height-adjustable drawbar, removable stakes at the rear, gear support winch with load and quick mode in front, integrated storage compartment for two aluminum loading ramps in the chassis, lockable ramp compartment (privacy cover), contour marking according to ECE R 048 regulation, vehicle with day registration, rental price from €550. Typing errors, mistakes and changes reserved, sample images. More data at: !, More details: ! Iisdpfx Aoxpnf Reabeh

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chucks, hard Iiodpfjrh Nh Sox Aabsh -Jaw width: 27 mm -Dimensions: see photo technical. drawing -Quantity: 2 sets of interchangeable jaws available -Price: per set -Total dimensions: 90/80/H65 mm -Total weight: 2.4 kg/set

Condition: new, machine/vehicle number: Elek Kova, Attachment suited for: Construction machines Selling price: € 24.500, US$ 25.960 Iisdpfoph Rm Sox Aabeh With proper blade choice and spacing it easily grinds • Grass lumps • Roots • Wood sticks • Glass • Tiles • Asphalt (with certain limitations) *The screener crusher is not suitable for crushing concrete or hard stones. Advantages: - Clog free structure that ensures good capacity, even with wet materials - Top screen combs carry most the material weight, this way the drums and bearings have less impact and load - Changeable wearing parts (screening blades and top screen combs) lower the operating costs - Simple structure (easy maintenance) - The top screen structure works smoothly, even with wet materials. Screening buckets produced by Galen are therefore an excellent choice for screening topsoil, compost and peat and the perfect tool for landscaping. 1.Innovative frame design • Straight outer sides • Low fastering points for wheel loaders 2. Long lifetime of blades and blade holders • New design ensures low wear factor • Spring pin fixing allows easy change of blades • Design of the blade protects the blade holder 3. Modular counter blade construction • Same counter blade elements used on all models • Counter blade also below the lower drum 4. Centralized lubrication points of the bearings • Easy access points in the frame make the greasing easy. • Speeds up with the daily service and maintenance. 5. No need for drain oil line • Lower installation costs • Easy to use on different base machines For 8 - 40 tons EXCAVATORS For 5 - 26 tons WHEEL LOADERS Prices are representative. Please contact us. For detailed information please visit screenbucket.net

Condition: used, Year of construction: 2018, 1 x CNC-CONTROLLED DRILLING, GLUING AND DOWEL INSERTING MACHINE GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz complete in standard design with: - Support with linear guide consisting of: 1 x single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3000/5000/8000 rpm) 1 x blow-out, gluing and dowel inserting station in reinforced design for dowels Æ 8 mm, dowel length 30 mm - fully automatic, electronically controlled central lubrication - X-axis NC controlled, with working length 1300 mm, travel speed max. 78 m/min. - Z-axis, position via support table 5-40 mm programmable with NC-controlled Z-axis option - Dowel driving overhang of 7-20 mm, programmable with NC-controlled Y-axis option, drilling depth of 0-35 mm (with drill length GL 70 mm) is automatically set with driving overhang - Closed glue system with 6 bar glue pressure via glue nozzle, for glues with a viscosity of 150 to 350 mPas - Glue quantity continuously adjustable via operator software - GL/WATER selector switch for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 l water - Control lamp for residual glue quantity display in the glue container - 1 side stop left, 1 side stop right and 1 center stop (all removable) - 4 start buttons for individual working with 1-4 workpieces - 4 pcs. Pneumatic inclined clamping cylinder 10° for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. suction funnel, connection Æ 80 mm - 1 pc. TCT control with: built-in industrial PC, incl. Soft PLC type Beckhoff TWINCAT, operating temperature range 0-50°C, TFT industrial display 15" resistive touchscreen, resolution 1024 x 768, CPU 2 GHz, 256 MB RAM, 2x network interface adapters, IDE hard disk, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - programming via menu-driven user software, drilling distances freely programmable with ABSOLUTE, RELATIVE or GRID dimensioning, automatic workpiece mirroring and work step optimization, 4 work fields can be assigned with different programs, graphic workpiece display, parametric programming, 0-point shift, programmable work lists, error diagnosis with plain text OPTIONS: 1 electronic, optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle 4 vertical inclined clamping cylinders 10° with holder, additionally, (total 8 clamping cylinders) 1 surcharge for machine bed length 1800 mm with working length 1800 mm 1 surcharge for: 1 horizontal drilling unit, motor 1.5 kW, with multi-spindle drilling head with 3 individually controllable drilling spindles, pitch 32 mm arranged in X-axis, tool speed 3000 rpm. (The standard working length is not reduced) 1 Y-axis NC-controlled, with recirculating ball screw and dynamic traversing speed of 300 mm/sec. The dowel driving overhang 7-30 mm and the drill hole depth 0-42 mm can be programmed via software. (with drill length GL 77 mm) for vertical drilling unit drilling from TOP, Y-axis position 5-42 mm 1 surcharge Y-axis NC-controlled position 5-62 mm instead of 5-42 mm 1 surcharge for: 1 vertical drilling unit drilling from TOP, motor 1.5 kW, with multi-spindle drilling head with 3 individually accessible drilling spindles, 32 mm pitch arranged in X-axis, tool speed 3000 rpm. Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm, (the standard working length is not reduced) 1 Z-axis NC-controlled, with K Iisdpexnlf Eefx Aabeh

Condition: ready for operation (used), Year of construction: 2010, This TRUMPF TruLaser Cell 7040 was manufactured in 2010. It features a CO2 laser cutting system with extensive travel ranges: X-axis up to 4000mm, Y-axis up to 2000mm, and Z-axis up to 1000mm. Maximum travel speeds reach 173 m/min, enhancing productivity. It includes a 60 GB hard drive and supports ELA USB and Network programming on Windows 7. For more information about this machine, please reach out to us. Application Types Cutting Iisdpjxa H S Dofx Aabeh

Condition: new, overall weight: 10,500 kg, empty load weight: 3,140 kg, maximum load weight: 7,360 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Ijdpfx Aexn Ualjabeih

Year of construction: 2021, condition: new, Attachment suited for: Construction machines When hard rock and rough terrain required high level of earth crushing force say hello to GALEN heavy duty rock ripper. Ijdpfx Aaen Tm Tgebsih Single tooth ripper concentrates penetration power into single point. The body is made of Hardox or special casting shank that manufactured in own casting factory For detailed information, please contact us.

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overhead loading, central locking for side and rear sideboards, automatic rear wall opening when tipping backwards, side walls are swingable and foldable, side boards with spring relief, platform floor made from 4 mm fine-grain steel, 8 strong recessed lashing rings in the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear, 45 degrees to the side, infinitely height-adjustable drawbar, rear posts plug-in, gearbox support winch with load and fast gear, at the front, chassis-integrated chamber for two aluminium loading ramps, lockable ramp storage compartment (privacy cover), outline marking in accordance with ECE R 048 regulation, vehicle with day registration, rental price from €550. -- Subject to misprints, errors and changes. Sample images. More data at: !, More details: ! Iodpfxexn Rqgo Aabeih

Year of construction: 2022, condition: new, Riper bucket designed for heavy duty applications, used for extraction work in the quarry, on hard and compact soil. The bucket allows you to move blocks and handle them once separated from the rocky surface. Iisdpfx Aaepa Rr Eebsh The excavator model on the photo is Hitachi ZX670 We can manufacture for every brand-model. Please contact us for more information and inquiries

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Iiedpfsxnx Sxjx Aabsh

Condition: new, overall weight: 10,500 kg, empty load weight: 3,280 kg, maximum load weight: 7,220 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,110 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, stanchions pluggable at the rear, geared support winch with load and fast gear, front, mounting shaft for two aluminum ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ijdexnx Tvjpfx Aabsih

Condition: new, overall weight: 13,000 kg, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall - foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side drop sides swinging and foldable, side drop sides with spring relief, bridge floor made of fine-grained steel 4 mm, 8 x strong lashing eyes recessed in the floor, 5-stage hard chrome-plated three-sided tipping cylinder, tipping angle: 50 degree tipping angle to the rear and 45 degree tipping angle to the side, infinitely height-adjustable drawbar, rear stanchions can be plugged in, geared support winch with load and fast gear, front, mounting shaft for two aluminum drive-on ramps integrated in the chassis, lockable ramp shaft (privacy screen), contour marking according to ECE R 048 regulation, , -- Misprints, errors and omissions excepted, sample images --, More data under: !, More Details: ! Isdpoxnx Ndofx Aabsih

Condition: new, overall weight: 11,900 kg, empty load weight: 2,980 kg, maximum load weight: 8,920 kg, axle configuration: 2 axles, loading space length: 5,110 mm, loading space width: 2,430 mm, suspension: steel, tire size: 245 / 70 R 17,5, color: beige, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Three-way tipper, loading height approx. 940 mm, front wall foldable for overloading, central locking for side and rear drop sides, automatic rear wall opening when tipping backwards, side walls swinging and foldable, side drop sides with spring assistance, platform floor made of 4 mm fine-grain steel, 8 strong lashing eyes recessed into the floor, 5-stage hard-chromed three-way tipping cylinder, tipping angle: 50 degrees to the rear and 45 degrees to the sides, continuously height-adjustable draw tube, removable rear stakes, gearbox support winch with load and high-speed mode at front, integrated receiver compartment for two aluminum loading ramps in chassis, lockable ramp compartment (privacy protection), contour marking according to ECE R 048 regulation, vehicle with day registration, -- Subject to misprints, errors and changes, sample images --, More data at: !, More details: ! Isdpfx Aajxnd Dajbjih