Used Heat Exchanger Condenser for sale (15,089)

Condition: refurbished (used), Arburg, Thermonic temperature controller, Arburg Allrounder Kedpfsyvp Upjx Abcoww 4 controllers in as-new condition. They were kept as spare parts in maintenance storage.

Condition: excellent (used), I'm selling a Heraeus T 5042 EK search engine Ksdpfx Abju Udp Iscsww

Condition: as good as new (ex-display), Year of construction: 2023, pressing force: 120 t, Here are the technical data of the offered machine: Technical data + information: HB 2021-A-188, oil hydraulic double column press 120 T bottom piston heating press. - idle speed up to 40 mm/sec - Opening speed up to 40 mm/sec - Starting press speed 5-15 mm/sec - Table size/heating plate size 600 × 600 mm - ram size/heating plate size 600 × 600 mm - 2 heating plates, electrically heated, up to 250 degrees - as OPTION - total size approx. 2000 × 1000 × 2800 mm height - Oil temperature control - Automatic lubrication - Free positioning of the ram - SICK/LEUTZE light barriers 14,1 mm on front side - Circuit oil cooling - Pressure holding valve 0 to 1800 sec. - Rear monitored door - Pressure adjustment from 30 T to 120 T - Travel limitation either by pressure or position - Programming set-up mode, single stroke (adjustable via rotary switch) - Control panel permanently installed in cabinet wall - Two-hand operation - Machine body double painted - Signal light: red: alarm, yellow baking phase, green: ready - Heating plates with electric heating rods, up to max. 250 degrees - Assembly, commissioning, instruction against separate charge Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Pressing force max. 1,600 kN Free ripping force max. 200 kN Pressure build-up time closed die steel to steel Max. 8 sec. Dimensions Max. Opening width per compartment 200 mm Stroke and min. opening per compartment 400/200 mm Table height above floor, without heating pl. 850 mm Height above floor (overall height) approx. 2.800 mm Hall height min. 3,500 mm Parallel deviation at 20 °C +/- 0.1 mm Deflection Determined at max. clamping force with 70 % occupancy ≤ 0.2 mm/m Total weight of the press without operating materials approx. 9 to Accessories: 4 HEATING PLATES Kwjdpfok S Dt Tex Abcow 500 × 400 mm, max. heating capacity Equipped with temperature sensor 300 degrees Speeds Fast closing with 15 mm sec. Pressing speed 10 mm sec. Sound pressure level, measured at 1.5 m height at the control panel according to DIN 45635-T16-KL3 max. 8 db(A) Number of pressing cylinders 1 pc. Operating pressure max. 240 bar Pressing pressure build-up time 4 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump BOSCHREXROTH gear pump approx. 48 L/min Oil volume approx. HLP 46 MW 300 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Automatic pressure readjustment after 5 % pressure loss Pressure stabilization for up to 1800 sec. Electrical system Main supply 400 V AC Control voltage Hydraulic pumps 24 V DC 24 V DC Frequency 50 Hz Connection hydraulic main motor 15 kW Total connection approx. without heating plates 19 kW ##### If the press does not exactly meet your requirements, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Our great strength is special machine construction and press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: refurbished (used), functionality: fully functional, Equipment: CE marking, Electric car-bottom furnace for heat treatment of steels (normalizing, annealing, tempering, preheating, etc.), manufacturer Pagnotta Termomeccanica srl, Deruta, Italy. Maximum temperature: 1,100°C Usable loading dimensions: 2,400 x 1,120 x h 1,120 mm Kwodsyt Iz Uopfx Abcew Capacity: 3,000 liters CE certification declaration Used and overhauled machine with new electric heating elements The specifications are for reference only; the photos refer to similar machines. The furnace can be customized according to your specific heat treatment process.

Condition: excellent (used), Binder Type: Binder ED 53 For sale is a high-quality BINDER ED 53 drying oven, Made in Germany. Kwsdpfx Absynh E Ajcjw This unit is ideally suited for laboratory, workshop, research, electronics, material testing, or hobby applications that require constant temperatures. Features: - Precise digital temperature display - Robust industrial-grade quality - Even heat distribution - Made in Germany - Ideal for professional applications Capabilities: The BINDER ED 53 is a precision drying oven with natural convection. It is used for: - Drying samples and materials - Heating components - Tempering of workpieces - Curing paints/coatings - Material testing at constant temperatures - Laboratory applications in schools, research, or industry The temperature can be set digitally and is reliably regulated. Thanks to its high-quality insulation and construction, the unit operates consistently and stably. Technical Data: - Model: BINDER ED 53 - Temperature range: up to 300 °C - Rated power: 1.20 kW - Connection: 230 V / 1N~ - Current draw: approx. 5.3 A - Frequency: 50–60 Hz - Protection class: IP20 - Temperature protection: DIN 12880 - Device class: 2.0 - Interior volume: approx. 53 liters - Approx. dimensions: - External: approx. 63 × 63 × 57 cm (W × H × D) - Internal: approx. 40 × 40 × 33 cm - Weight: approx. 40–45 kg Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (see photo) (Subject to changes and errors in the technical data. All data provided without liability!) For further questions, feel free to contact us by phone.

Condition: good (used), Year of construction: 2013, Complete heating system, but without fuel extraction from the storage room, with cyclone for flue gas dust removal, already dismantled. Kwedpfx Aeytra Uobcow

Condition: used, mileage: 5,85,000 km, power: 163 kW (221.62 HP), first registration: 02/2012, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: green, gearing type: automatic, emission class: euro5, total width: 2,500 mm, total height: 3,950 mm, loading space length: 6,800 mm, loading space width: 2,400 mm, loading space height: 2,750 mm, Year of construction: 2012, Equipment: ABS, soot filter, Additional information: * Payload: 5221 kg * Type | First axle: Fulda * Tyre size | First axle: 245/70 R17.5 * Tread depth inner left | First axle: 20% * Tread depth inner right | First axle: 20% * Maximum axle load | First axle: 4480 kg * Type | Second axle: Fulda * Tyre size | Second axle: 245/70 R17.5 * Tread depth outer left | Second axle: 60% * Tread depth inner left | Second axle: 60% * Tread depth outer right | Second axle: 60% * Tread depth inner right | Second axle: 60% * Maximum axle load | Second axle: 5992 kg * Wheelbase: 465 cm * Axle position | First axle: Front * Axle brand | First axle: Other * Suspension | First axle: Parabolic springs * Axle position | Second axle: Rear * Axle brand | Second axle: Other * Price on request: Yes * Brake type | First axle: Disc brakes * Steering | First axle: Yes * Brake type | Second axle: Disc brakes * Suspension | Second axle: Air suspension * Twin tyres | Second axle: Yes * Driven axle | Second axle: Yes Additional equipment: * Anti-lock braking system (ABS) * Central locking * EBS (Electronic Braking System) * Electric windows * Fog lights * Heater * Homepage * Isofix child seat attachment * Parabolic suspension * Particulate filter * Radio/cassette player * Roof spoiler Kwsdpfx Aex A Rm Rsbcsw * SemCollection * Speed limiter * Spoiler * Sun visor Semtrade B.V. Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: Export costs | Please inform yourself in advance about the costs and procedures for your country Location | Maasdijk (NL) | 140 km from the German border | 20 km from Rotterdam The Hague Airport Disclaimer: Subject to changes, prior sale, and errors.

Condition: used, Compressed Air Dryer PARKER HIROSS for Compressor Systems Mechanical Condensate Separator, Water Separator Refrigeration Dryer with water-cooled aftercooler for removal of water vapor and cooling of compressed air or gases. 1 unit Aftercooler Type WFN009 DHH16 Air flow rate (standard): 540 m3/h = 9,000 liters/min. Operating pressure (air): max. 16 bar Housing length: 1,020 mm Housing diameter: Ø 105 mm Kwsdpfsdzqn Ujx Abcsw Threaded air connection: G 2" Threaded water connection: G 3/4" Weight of aftercooler: 11 kg Dimensions of aftercooler (L x W x H): 1,030 x 850 x 200 mm + 1 unit Water Separator Type CSP 008 Standard flow rate: 480 m3/h = 8,000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 unit Mechanical Condensate Separator HIROSS SAC 120 Threaded connections: R 1/2" Operating pressure: 16 bar Volume: 0.8 liters - operates without compressed air loss All components assembled as shown in the photos Mounted height (upright): 2,000 mm Total weight approx. 40 kg 2 identical units available

Condition: used, Flame Heating Device Roland Groß + Söhne GmbH Ring Burner for Preheating Weld Seams, Casting Preheating, etc. Model: 1 x 1" Ionization Serial No.: ALMA Year of Manufacture: 03/20 Connection Voltage: 230 Volt Max. Gas Pressure: 500 mbar Max. Air Pressure: 10 bar Max. Gas Flow Rate: 30 Nm³/h Max. Air Flow Rate: 300 Nm³/h Including 10 Different Flame Ring Nozzles - Flame monitoring by Hans Henning - Hinged ring nozzle made of two half-shells, inner Ø 310 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 400 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 490 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 500 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 590 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 690 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 800 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, outlet at the face side - Hinged ring nozzle made of two half-shells, inner Ø 890 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, inner Ø 990 mm, with hose quick-connect coupling and ignition device, central outlet - Hinged ring nozzle made of two half-shells, arc length 1500 mm, with hose quick-connect coupling and ignition device, central outlet For heating pipes and vessels. For heating steel to welding temperature. Kjdpedz Spwofx Abceww Ideal for repair welds and the fabrication of welded assemblies from fine-grain steels. Preheating for powder flame spraying or Sulzer Metco high velocity flame spraying. Gas heating for thermal coating applications.

Condition: like new (used), Year of construction: 2021, functionality: unexamined, power: 140 kW (190.35 HP), nominal power: 140 kW (190.35 HP), As-new Combined Heat and Power Plants – 2× WOLF Power Systems – 140 kW electric each – unused For sale are two as-new combined heat and power (CHP) plants from WOLF Power Systems, each with an electrical output of 140 kW. The units have never been installed or commissioned and are therefore in technically unused condition. Since delivery approximately five years ago, they have been stored dry and protected. Technical specifications: Manufacturer: WOLF Power Systems Kedpfx Aeyt Emnebceww Electrical output: 140 kW per unit Condition: unused / as new Storage: dry, professionally stored Availability: immediate The current purchase price is approximately €220,000 net per unit. This is a rare opportunity to acquire high-quality CHP technology well below new price – ideal for commercial, district heating projects, agriculture, or energy contracting. Inspection possible by appointment. Asking price is half of new price, please submit your offer!

Condition: used, Year of construction: 2016, operating hours: 55,000 h, functionality: fully functional, power: 1,200 kW (1,631.54 HP), temperature: 110 °C, nominal heat output: 1,200 kW (1,631.54 HP), Equipment: documentation/manual, hot water, type plate available, Used, fully functional heating system for sale. Operation has ceased, the system will be dismantled. More details by email or phone. Kwedpfx Aboyr Aikscjw

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Kodpfxsyma Nwe Abcsww (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: used, Universal Temperature Control Unit WEINREICH Type WTD 4 Temperature control unit with electric heating and connections for external cooling Serial No.: 11932217 Year of manufacture: 1993 Maximum temperature: 140°C Kjdpfx Abeg Rhx Ujcoww Maximum operating overpressure: 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water supply + return: G 3/8" Cooling water supply + return: G 3/8" Total power consumption: 4.4 kW Power supply: 380 Volt, 50 Hz, CEE plug - Tempering medium: water - Temperature control with actual and setpoint display STÖRK-TRONIC Type ST 96-35.02K - Water circulation pump: SPECK - An external cooling unit is required for cooling (the cooled water is supplied to the temperature control unit) - Mobile on 4 castors Dimensions (L x W x H): 620 x 260 x 670 mm Weight: 55 kg In good condition

Year of construction: 2021, condition: new, pressing force: 50 t, Here are the technical data of the offered machine: If the press does not exactly meet your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: hydraulic 50 T heating press for laboratories It is a lower piston press with an open height of 400 mm ram travel 300 mm heating platen capacity up to 250 degrees heating plate size 200x200mm weight about 1500 kg height 1950 mm hydraulics built in the press body Hydraulic tank with 100 l monitored vertical door for the press chamber pressure, position - and speed adjustable via SIEMENS S 7 1200 SIEMENS touch screen monitor with 9 inch Safety technology from SICK (C-press, hydraulic press, hydraulic press, laboratory press, laboratory) Are you looking for a custom-fit machine? Contact us for an individual offer. Our hydraulic presses are manufactured according to German machinery directives, as well as European machinery directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore our presses exceed the Canadian and European safety requirements, because they correspond in all points to the national Brazilian safety guideline NR 12, which is based on these. Our great strength is the special machine construction and the press automation. We sell customized hydraulic presses, press brakes and impact shears at surprisingly low prices. Kjdpfx Aogrkigobcoww For the hydraulics of the presses we mainly use components of leading European manufacturers.

Condition: used, net cooking length ± 12.500 mm belt width ± 700 mm all stainless steel with 2 hoists 16 fans Ksdpfx Ajym Rudebceww infeed conveyor outfeed conveyork washing system (conveyor) suitable for steam heating max. product height : ± 180 mm dimensions (l x w x h) : ± 14.600 x 2.400 x 4.400 mm adjustable speed 120 kW infeed height: ± 1.000 mm outfeed height: ± 1.000 mm cooking time min/max : 3-18 min mesh wire belt Simatic S7 Text display OP 17 electric power : 26 kW 400V

Condition: used, Year of construction: 2017, machine/vehicle number: AT86, Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph Technical Specifications and Use of the heating tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph heats bottles using a hot water system, which makes it ideal for applications in the bottling industry. Moreover, this heating tunnel performs reliably and includes advanced technical features. It handles cylindrical bottles of various sizes while ensuring high efficiency and operational precision. Technical Specifications of the Used Heating Tunnel The used heating tunnel employs a hot water heat exchanger, and users need to supply hot water through a gas boiler. Consequently, this setup heats the bottles uniformly and optimizes the workflow. Additionally, the recycling pump and dryer consume 53 kW of energy, which ensures energy efficiency while maintaining high performance. Furthermore, the used heating tunnel processes 12000 bottles per hour (bph), which makes it particularly suitable for high-speed bottling lines. Its FIFO (First In First Out) single-file system organizes bottles into a continuous and orderly flow. As a result, the system ensures consistent thermal treatment. In terms of compatibility, the machine handles cylindrical bottles with diameters ranging from 60 mm to 100 mm. Therefore, it provides versatility for different formats and types of containers. Additionally, the tunnel operates counterclockwise (right-to-left), which suits specific production layout requirements. Usage Conditions and Manufacturing Details The heating tunnel HTD12 operates in an “as-is” condition, so buyers must inspect the machine thoroughly before purchase. Notably, the manufacturer built this model in 2017, delivering a reliable and high-quality solution for integrating a heating tunnel into production lines. Omar R&G, a company renowned for producing high-quality machinery for the bottling industry, designed the HTD12 model to withstand intensive use. Consequently, it maintains operational reliability even in demanding environments. Technical and Functional Advantages The hot water heat exchanger delivers precise temperature control, which ensures uniform bottle heating. Moreover, the FIFO system keeps bottles in their entry order, which minimizes delays or errors during processing. In addition, the modular design and optimized layout simplify maintenance. Users can, therefore, integrate the tunnel quickly into existing lines. Furthermore, the system accommodates bottles of different diameters, providing versatility for diverse industrial applications. Conclusion of the Heating Tunnel HTD12 The Used Heating Tunnel Omar R&G HTD12 year 2017 up to 12000 bph provides a high-performing, reliable, and versatile solution for bottle heating. Moreover, the machine processes 12,000 bph, organizes bottles efficiently using the FIFO system, and supports various formats. Consequently, it proves to be an excellent choice for high-productivity bottling lines. Thus, this HTD12 model by Omar R&G combines high performance with operational simplicity. As a result, it becomes a solid choice for industry professionals who seek reliability and efficiency. Therefore, for companies that prioritize productivity and precision, this machine represents a long-term investment. Kwjdpfxevxz Axe Abcjw

Condition: used, Year of construction: 2012, functionality: unexamined, power: 1,500 kW (2,039.43 HP), nominal heat output: 3,000 kW (4,078.86 HP), heating capacity: 3,000 kW (4,078.86 HP), Selling complete boiler technology with 2 boilers ELBH with silo for biomas chips. Buyer have to arrange disassembly on site. Seller arrange crain, liftruck, full support on site + technical support. Kwedpfx Aox Idkpsbcsw

Year of construction: 2023, condition: used, functionality: fully functional, This listing is for a Rational UltraVent hood suitable for combi steamers of the types iCombi Pro XS 6 2/3 GN electric. The advanced condensation technology of the Rational UltraVent condensation hood ensures that all steam emitted from the combi steamer is completely captured and discharged. Installation is simple and can also be carried out retroactively at any time. The hood has been inspected by our in-house workshop and is fully functional. You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on electrical components, limited to replacement of defective parts (excluding labor costs) - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Shipping or collection available as required - Competent advice before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - DGUV V3 safety inspection This UltraVent hood features patented condensation technology, binding and removing steam and vapors. Costly ventilation installations are a thing of the past; no external exhaust connection needed. Installation is straightforward and possible at any time, even retroactively. Ideal for use in small kitchens, retail areas in butcheries, bakeries, snack bars, and catering services. Technical data: Dimensions (W x D x H): approx. 657 x 580 x 240 mm Power connection: Voltage: 230 V / Frequency: 50-60 Hz Serial number: ET3UA23045064733 Year of manufacture: 2023 Condition: Used, inspected, fully functional Additional features: - Integrated lighting - Contactless door switch - Automatic boost of extraction power when the cooking chamber door is opened Shipping: Delivery or collection by arrangement Kwodpfxsylknhs Abcew Worldwide shipping on request Shipping to islands or mountain locations only by prior arrangement Subject to changes and errors If you have questions, require advice, or wish to inspect the item on site, please contact us by phone during our opening hours: Monday to Friday 09:00 - 13:00 and 14:00 - 17:00. Sale is subject exclusively to our General Terms and Conditions (GTC).

Condition: used, Year of construction: 2019, Gilles wood chip boiler 240 kW, year 2019, underfeed combustion, includes feed auger, backfire protection, rotary valve, automatic ash removal, automatic ignition, dust separator mounted on heat exchanger, complete with control unit—the control unit is almost new! Bunker discharge can be offered if required. The system can be rolled outdoors in one piece. The unit is being sold due to connection to district heating. Many wear parts have been replaced preventively every year! Kwjdevgf Ibepfx Abcew

Condition: excellent (used), Low temperature boiler,Buderus SB615 power 510KW ,120Grad ,5,5Bar,gas or oil burner possible Kwedpfxjqww Ice Abcow

Condition: excellent (used), Buderus 455 kW. Oil emergency heating system. Low-temperature boiler, can also be equipped with a biogas burner. Kedpsx U Exujfx Abcoww

Condition: excellent (used), Buderus heating boiler SK635 / 555 kW Kwodpfx Aboyr Aidocew

Year of construction: 2017, condition: good (used), functionality: fully functional, For sale is a carousel oven (Paternosterofen) from the brand Eliog, model PNO 80. This oven is a custom-built solution. Designed for warming components, equipped with a carousel handling system and control cabinet. Also suitable for drying or dehydrating food and cannabis. The system was installed in 2017 and has only been used occasionally since around 2022. The plant has already been dismantled. Technical specifications: Year of manufacture: 2017 Max. component support area: 65 mm Nominal temperature: 70°C Operating temperature: 70–75°C (At 75°C the utilisation area safety limiter shuts off!) Set conveyor time: approx. 240 min Max. airflow speed: approx. 4 m/s Heating capacity: 72 kW Nominal voltage: 3*400 V, 50 Hz Fresh air supply: Ambient air at the oven Exhaust air: max. 850 m³/h Usable chamber dimensions: 4780*2200*2250 mm Workpiece carriers: 56 pcs. (oven capacity) Max. workpiece weight: 0.3 kg Transport height above floor: 400 mm Heating: 3 kW / heater element, 6 heater elements per control zone-4 (total 72 kW output) Overall dimensions: approx. 4,425*5,425*4,980 mm Space requirement: 5012.4*3919.5*5000 mm Kwjdpfxjup R U Ue Abcsw Oven weight: approx. 7,500 kg Control cabinet: approx. 450 kg (Images have been modified due to copyright reasons) Transport and loading can be organised across Europe for an additional fee upon request. Prices are plus VAT. Inspections are possible by appointment. Please contact us – our team will be glad to assist you. Part exchange or trade-in possible! Machine Purchase & Sale BUYING / SELLING PRODUCTION MACHINERY & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you interested in selling yours? For further information or to get in touch, please visit our website.

Condition: new, functionality: fully functional, power: 14.6 kW (19.85 HP), gearing type: automatic, fuel type: diesel, fuel consumption per hour: 2 l/h, fuel tank capacity: 20 l, color: orange, overall weight: 2,320 kg, operation weight: 2,200 kg, lifting height: 4,190 mm, drive condition: 100 %, chain condition: 100 %, number of seats: 1, shovel volume: 0.068 m³, suspension: other, Year of construction: 2025, operating hours: 5 h, Equipment: adjustable chassis, cabin, hydraulics, parking heater, rubber tracks, Are you looking for a reliable, modern, and immediately ready-for-use mini excavator in the 2.5-ton class? The LT-25P from Tec-Point GmbH impresses with powerful digging force, high-quality workmanship, and maximum comfort – perfect for construction, landscaping, agriculture, and municipal applications. With its robust steel construction, modern load-sensing hydraulics, and swing boom, this machine is ideal for tight construction sites and powerful enough for demanding earthmoving and foundation work. The fully enclosed cab with heating makes the LT-25P a true year-round professional machine! ⭐ Your advantages at a glance ✅ Professional 2.5-ton class mini excavator for daily use ✅ Swing boom – ideal for working in confined spaces ✅ Stable undercarriage 1,300 / 1,500 mm – maximum stability ✅ Load-sensing hydraulics – precise and energy-saving control ✅ Axial piston pump with high delivery rate ✅ Hydraulic piston travel and swing motors ✅ High digging and breakout forces for demanding jobs ✅ Wear-resistant rubber tracks – durable & robust ⚙️ TECHNICAL DATA Operating weight: approx. 2,200 kg Operating weight with cab: approx. 2,320 kg Engine: Yanmar 3TNV80F | 3-cylinder diesel Power: 14.6 kW / approx. 19.9 hp Max. digging depth: up to 2,410 mm Max. reach: up to 4,520 mm Travel speed: 2.0 – 3.8 km/h Gradeability: 30° ️ COMFORT & FEATURES ✔ Fully enclosed comfort cabin including heating Kwsdox Hg Etjpfx Abcjw ✔ Ergonomic joystick control ✔ LED work lighting ✔ Comfort seat for long shifts ✔ Dozer blade ✔ Robust rubber tracks ✔ Hydraulic safety valves ✔ Reinforced steel construction for maximum durability INCLUDED IN THE PACKAGE: 3 BUCKETS The delivery includes 3 professional buckets: ✅ 25 cm trench bucket ✅ 50 cm digging bucket ✅ 100 cm grading bucket ➡️ Ready for any job site right away! ➕ OPTIONAL EXTRAS AT EXTRA COST Hydraulic quick coupler ➡️ Note: The quick coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic tilt quick coupler ➡️ Note: The tilt coupler shown in the pictures is not included in the standard set and can be ordered as an option. Hydraulic auger set up to Ø 300 mm ️ SERVICE & WARRANTY Maintenance every 250 operating hours or annually 12 months Europe-wide warranty Spare parts & service directly from stock in Rheda-Wiedenbrück IMMEDIATELY AVAILABLE + DELIVERY POSSIBLE Machines available now Viewing by appointment possible at any time Europe-wide delivery organized on request PRICE €19,900 net (RRP) Location: Rheda-Wiedenbrück Special offer price possible – contact us for details! Inquire now & secure your advantage! Demand is high – secure your LT-25P today. ➡️ Contact us directly via Machineseeker or call us – we are happy to offer you personal advice!

Condition: used, Year of construction: 2007, functionality: fully functional, power: 100 kW (135.96 HP), heating capacity: 100 kW (135.96 HP), nominal heat output: 100 kW (135.96 HP), nominal power: 100 kW (135.96 HP), tank capacity: 5,000 l, We are offering this used HDG Bavaria 100kW heating system with articulated arm discharge, manufactured in 2007. Manufacturer: HDG Bavaria Model: 100kW with articulated arm discharge Year of manufacture: 2007 If you have any questions or require further information, please feel free to send us a message or give us a call. The system is currently still in operation and can be inspected. The offer includes a 5,000L buffer tank, control unit, and various spare parts (which we have kept in stock as a precaution). Kedpfjyrhd Tox Abcoww