Used Heat Exchanger Condenser for sale (16,840)

Year of construction: 1990, condition: used, Capacity: 250 hl/h Pressure: 16 bar Length: 3.000 mm Width: 750 mm Height: 2.246 mm Weight: 3150 kg Material: plates: 1.4404/0,8mm 196 WAP, 59 HHP, 3 AP / seals: Perbunan PRESS IN Base construction: clamping screw cap NIRO pedestal Cedpfx Aozty Hnei Rshd Features: 4-stages (heater, hot holding section, regenerative heat exchanger, pressure reduction), connections: DN65

Condition: used, Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts. Specifications: Surface Area: 16 m² Chodpfxsyh I Une Ai Rjd Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 100°C Tube Side Max. Pressure: 6 bar Tube Side Max. Temp.: 100°C Tube Diameter: 25 mm Number of Tubes: 68 Weight: Estimated: Kg 690.0

Year of construction: 1993, condition: used, Two-stage plate heat exchanger. First stage - Heating: hot water / product Product inlet approx 61-62°C, outlet approx 72°C, flow rate 600 hl/h; Hot water inlet approx 72,5°C, flow rate 750 hl/h Second stage - Regeneration: product / product Product inlet approx. 0-4°C, product outlet approx. 61-62°C, flow rate 600 hl/h; Product inlet approx. 72°C, product outlet approx. 11-14°C, flow rate 600 hl/h Additional title: 2-stage heat exchanger Capacity: 600 hl/h Hot water: 750 hl/h Operating pressure: 21 bar Operating temperature: 100 °C Chedpjztzckjfx Ai Rod Length: 2,15 m Width: 0,95 m Height: 2,15 m Weight: 5000 kg Material: EPDM HT / NBR / 1.4439

Year of construction: 2018, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger, oil cooler -Manufacturer: Jiangsu, heat exchanger type SL-421 Chsdpfxexl R Rno Ai Red -Pump: Aulank CPS-20 1.5 kW -Flow rate: 180 l/min -Container: Material stainless steel, with level indicator -Transport dimensions: 1180/780/H760 mm -Weight: 80 kg

Year of construction: 2026, condition: new, Coaxial tubular heat exchanger for connection to an existing heating system / heat source * Coaxial tubular heat exchanger (KRWT) with thermal insulation * Automatic low temperature protection * Stainless steel juice pump * Chassis Advantages: Csdpfxot Uzhcs Ai Rjhd * Low maintenance * Suitable for media containing turbid matter * Simple, quick cleaning * Durable thanks to the use of high-quality and robust components Optional: Mixing unit incl. circulation pump for a stable inlet temperature of the heating water ##### RINK - Pasteurizing systems for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2006, condition: like new (used),

Year of construction: 1990, condition: good (used), Heat exchanger, cooling coil, cooling pipe, cooling spiral, shell and tube heat exchanger Csdpswu Tk Sofx Ai Rohd -Manufacturer: Bloksma, heat exchanger shell and tube heat exchanger -Type: B13-2Z-04 B13-3H7-15D -Operating pressure: 6.5 / 3.5 bar -Dimensions: 2235/340/H155 mm -Weight: 61 kg

Year of construction: 1979, condition: used, Additional title: wort cooler Capacity: 150 hl/h Pressure: 6 bar Max. temperature: 100 °C Length: 2550 mm Codpjvcqtzefx Ai Rohd Width: 900 mm Height: 2000 mm Weight: 1080 kg Material: stainless steel Base construction: on frame Features: 2-stage, connection widths: DN65 (wort, water) and DN80 (ice water) Periphery: wort aeration, mixing pump, booster pump (water),

Condition: used, Stainless Steel Heat Exchanger AGETHERMA Type FT-1.1-910/230/10-RS04-T10-ATWH Air-to-water, Air-to-oil Heat Exchanger Serial No. WT08-1065P-2 Year of Manufacture: 2008 Completely made of stainless steel (presumably 1.4571) Gas/air flow: 900 x 230 mm External connection flange: 1000 x 310 mm Max. permissible pressure: 10 bar Max. permissible temperature: 300 °C Volume: 27 liters Test pressure: 17.9 bar Net weight: 325 kg Cjdoy Dvguepfx Ai Rohd Manufacturer test date Flange size: Ø DN25 DIN 2635 PN 40 (2 pieces) - Tubes are stainless steel with aluminum fins for improved heat transfer Available as optional accessories (at extra cost): 3 units heat exchangers with identical technical data and 27 liter capacity (weight per unit: 325 kg) 1 unit heat exchanger with identical technical data and 17 liter capacity (weight: 200 kg) 2x 90° bends with flange connection, made of stainless steel 2x adapters from rectangular flange to round pipe Ø 210 mm, made of stainless steel Price stated per heat exchanger The pictures show all 4 heat exchangers as one unit placed on a pallet. Total weight of all parts approx. 1,400 kg Sale of all heat exchangers as a package: 4,000 EUR

Condition: used, Rittal TopTherm Air/Water Heat Exchanger SK 3209500 Rittal air/water heat exchanger for switchgear cabinet climate control. Unit manufactured in 2019. A total of 3 units are available. Manufacturer: Rittal Series: TopTherm Chodpfxjzdafge Ai Red Type: SK 3209500 Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.40 A at 50 Hz Rated current: 0.48 A at 60 Hz Power consumption: 0.095 kW at 50 Hz Power consumption: 0.110 kW at 60 Hz Useful cooling capacity: 2.50 kW Cooling capacity measurement point: L35 / W10 Coolant flow rate: 400 l/h Operating temperature range: 1 °C to 70 °C Coolant: Water Maximum coolant temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 23.5 kg

Year of construction: 2006, condition: used, This plate heat exchanger from APV offers efficient and reliable heat transfer with a capacity of up to 240 hl/h in two stages. With a generous heat exchange area of 134 m² and a robust design for operating pressures up to 23 bar, this unit is well suited for demanding applications in breweries and the beverage industry. Thanks to its solid construction and compact design, it can be easily integrated into existing systems while ensuring high thermal performance and energy efficiency. An excellent and cost-effective solution for wort cooling, product heating, or other process applications. Our team at VBW Asset Trade will be happy to answer your questions. Capacity: 240 hl/h 2 stages Cedpeztzbyjfx Ai Rshd Heat exchange area: 134 m² plate tracery min. 880 mm, max. 910 mm, actual 885 mm Operating pressure: 23 bar Length: 2000 mm Width: 700 mm Height: 2000 mm

Condition: used, Unused approximately 15 square metre vertical shell and tube heat exchanger. Unit has approximately 17.4mm diamater x 2000mm long stainless steel 316 tubes. Unit has a design pressure of 6.0 bar / full vacuum shellside and 10.0 bar / full vacuum tubeside. Unit has a design temperature of 150°c. Unit has a stainless steel 316 shell approximately 2000mm diameter x 330mm straight side. Unit has mounted side support lugs for easy usage. Unit is designed to ASME VIII standard. Specifications: Surface Area: 15 m² Material of Shell: Stainless Steel Material of Tubes: Stainless Steel Shell Side Max. Pressure: 6 bar Shell Side Max. Temp.: 150°C Tube Side Max. Pressure: 10 bar Tube Side Max. Temp.: 150°C Configuration [Vertical/Horizontal]: Vertical Weight: Actual: Kg550.0 Cjdpfsyh I Uhsx Ai Rjhd Dimensions: 650 X 3000

Year of construction: 2009, condition: ready for operation (used), HRS UNICUS dynamic heat exchanger, manufactured from AISI 304 stainless steel. Equipped with an internal scraping system to increase the heat transfer coefficient and prevent fouling in viscous products. Particularly suitable for: • Fruit purees. • Vegetable purees. • Sauces. • Processed tomatoes. • Vegetable creams. • High-viscosity products. Csdpfx Aezdkczoi Rjhd From an industrial production line for purees, in operation until it was dismantled. Additional documentation and photographs available.

Year of construction: 2007, condition: used, Single-stage plate heat exchanger, previously used for wort cooling in a 15 hl brewhouse. Flow rate product approx. 10 hl/h. Inlet temperature 75°C, outlet temperature 20°C. Cooling water temperature approx. 13°C. Additional title: wort cooler Wort cooler capacity approx: 10 hl/h Content water: 4 l Codpfow Uczrox Ai Rehd Content wort: 4 l Max. pressure: 10 bar Weight: 165 kg Material: stainless steel Position: premounted on frame Features: splash guard, plate heat exchanger, aeration via Venturi jet

Condition: used, Rittal air/water heat exchanger for the climate control of control cabinets and automation technology. Manufacturer: Rittal Series: TopTherm Type: SK 3210100 Csdpfx Aiszdafmj Rjhd Device type: Air/water heat exchanger Condition: used Supply voltage: 230 V AC Frequency: 50/60 Hz Phases: 1~ Rated current: 0.44 A at 50 Hz Rated current: 0.50 A at 60 Hz Power consumption: 0.100 kW at 50 Hz Power consumption: 0.120 kW at 60 Hz Useful cooling capacity: 4.00 kW Measuring point for cooling capacity: L35 / W10 Flow rate of cooling medium: 400 l/h Operating temperature range: 1 °C to 70 °C Cooling medium: Water Maximum cooling medium temperature: 30 °C Operating pressure: 0.1 to 1.0 MPa Operating pressure: 14.5 to 145 psi Protection class: IP55 Weight: 25.5 kg Location: Kusel

Condition: new, GEA WTT GBS 700M-U-86 Plate Heat Exchanger New, unused plate heat exchanger from stock. Suitable for industrial refrigeration, heat transfer, and process applications. Manufacturer: GEA WTT GmbH Type: GBS 700M-U-86 Part Number: 12509184 Chjdpfx Aezb Nviji Red Serial Number: 10-120106888-0001 Design: Brazed plate heat exchanger Number of plates: 86 Version: G1, G2, G3, G4 Temperature range: -200 °C to +200 °C Max. operating pressure side 1: 30 bar Max. operating pressure side 2: 30 bar Volume side 1: 9.66 l Volume side 2: 9.89 l Volume side 3: 0.00 l Refrigerant: All refrigerants except ammonia Country of manufacture: Germany Condition: NOS (New Old Stock) Location: Kusel

Condition: used, Year of construction: 1999, Capacity: 350 hl/h Operating over pressure: 24 bar Desing temperature: 104 °C Length: 1,6 m Width: 0,85 m Height: 2,2 m Cjdozty Tuspfx Ai Rohd Weight: 5000 kg Features: product pump H: 9,8 bar (Hygiana CN II, GEA, 350 hl/h), booster pump H: 4,7 bar (EURO Hygia CN II, GEA, 350 hl/h), hot water pump H: 1,3 bar (Maxa -DIN 80-2ßß 4/4, GEA, 700 hl/h)

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 100 kW Codpfx Ast Hfygei Rehd * Hourly output up to 1,350 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Empty weight approx. 320 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Cjdpfot Hfx Aox Ai Rshd Technical data: * Boiler output 60 kW * Hourly output up to 850 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 140 cm * Empty weight approx. 230 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: * Boiler output 80 kW * Hourly output up to 1,100 liters (10-78 °C) * Dimensions (H/W/D) approx. 160 x 110 x 160 cm * Unladen weight approx. 280 kg Chedpot Hfyaefx Ai Rjd ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Condition: excellent (used), Heat exchanger, shell-and-tube heat exchanger, liquid cooler, Baltimore Aircoil International BAC F100, used machine Manufacturer: Baltimore Aircoil International Type: BAC F100 Year: 2015 Pressure: -10 / 10 bar Temperature: -20 / 82 °C Csdoyfnulspfx Ai Rshd Medium: Water / Glycol

Year of construction: 1999, condition: not inspected (used), Sigma plate heat exchangers for milk processing. Chedpeh D Hkpsfx Ai Red

Year of construction: 2026, condition: new, Instantaneous water heater with tubular heat exchanger directly in the boiler water * Low space requirement and low weight * Energy savings of up to 10%! * low maintenance * easy to clean * Optimum price/performance ratio * Optionally with oil or gas burner Technical data: Chjdpfet Eui Isx Ai Rod * Boiler output 40 kW * Hourly output up to 550 liters (10-78 °C) * Dimensions (H/W/D) approx. 140 x 100 x 115 cm * Empty weight approx. 190 kg ##### RINK - Pasteurizers for more than 30 years Proven technology - more than 500 units in customer use

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The refrigerant gas exits the compressor and flows to the air inlet connection of the ATC-E condenser. Heat from the refrigerant is transferred through the heat exchanger tubes to the water that flows downward through the tubes. Simultaneously, air is drawn into the air inlet grilles at the base of the condenser and flows upward over the heat exchanger, counter to the water flow. A small portion of the water evaporates, and heat is removed from the system. The warm, moist air is drawn by the fan to the top of the evaporative condenser and released into the atmosphere. The remaining water falls into the collection basin at the bottom of the condenser, where it is recirculated through the water distribution system and flows down over the heat exchanger. Thermal-Pak II Heat Exchanger EVAPCO's Thermal-Pak II heat exchangers, featuring a patented design, ensure maximum cooling capacity. The airflow through the heat exchanger is countercurrent to the fluid flow, resulting in the most efficient heat transfer process. A specially designed heat exchanger is used to reduce air pressure drop across the unit while maximizing the tube surface area and increasing the heat transfer capacity. Elliptical return bends provide more circuits per heat exchanger bundle and increase the maximum capacity per footprint. The heat exchanger is located in the airflow, resulting in an increase in the dry-bulb temperature. CrossCool internal tube enhancement increases fluid turbulence and provides additional evaporative capacity. Available in type 304 SS or type 316 SS construction. Drift eliminators Limit drift rate to no more than 0.001% of the recirculated water flow rate. Csds Ag Id Topfx Ai Rohd Minimize the risk of Legionella spread. Constructed with an inert polyvinyl chloride (PVC). Superior air inlet louvers and screen design. Constructed with an inert polyvinyl chloride (PVC). Two-tier design that minimizes drift loss and the potential for algae growth in the tower. Framed in steel in easily removable sections. Pressurized water distribution system EVAPCO's zero-maintenance ZMII® spray nozzle remains clog-free, allowing for even and consistent water distribution. This makes it the best-performing, corrosion-resistant, and maintenance-free water distribution system in the industry. ZMII spray nozzles have a 1-1/4" diameter opening and a 1-1/4" transparent splash plate. Mounted in corrosion-resistant PVC water distribution piping with threaded end caps. Provides unparalleled heat exchanger coverage and scale prevention. Stainless Steel Water Basin Available in type 304 or type 316 stainless steel. Covers the entire area of the water basin, including the supporting columns and the frame of the louvers. Welded water basin seams for leak-free operation. Stainless Steel Housing and Fan Available in type 304 or type 316 stainless steel. Covers the entire upper section, including the fan shroud. Stainless Steel Thermal-Pak II Heat Exchanger Available in type 304 or type 316 stainless steel. The stainless steel heat exchanger offers superior resistance to corrosion in harsh environments and is available within EVAPCO's standard delivery time! The EVAPCO 304 STT heat exchanger option can be manufactured as an ASME heat exchanger.

Condition: good (used), Year of construction: 2015, functionality: fully functional, cooling capacity: 257.9 kW (350.65 HP), type of input current: three-phase, type of cooling: air, overall weight: 2,725 kg, input voltage: 400 V, total width: 2,200 mm, total length: 3,700 mm, total height: 2,100 mm, warranty duration: 6 months, heating capacity: 265.2 kW (360.57 HP), AIRCOOLED CHILLER / HEAT PUMP CIAT ILDC 1000V 257.9 KW/265.2 KW Cooling capacity: 257.9 kW / 73.33 tons (12/7 — 35°C) Heating capacity: 265.2 kW / 75.41 tons (40/45 —7°C) Year of manufacture: 2015 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: 2 pcs. Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Copeland ZP385KCE-TWD-522 (scroll) + 2 pcs. Copeland ZP235KCE-TWD-522 (scroll) Type of refrigerant: R410A Number of fans: 4 pcs. Hydraulic module: 2 pcs. water pump Wilo DLP65/130-4/2, expansion vessel. Dimensions: 3.7x2.2x2.1 m Weight: 2725 kg Working hours: 2/2/2/2 h. Condition: Used, tested, fully operational CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. Our company can also offer: - refrigerant charging; - replacement of oil and filters; Chodpfx Aio Aa Rfxo Rjd - technical support. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.