Used Heated for sale (14,070)

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control Kfsdpfx Aex H Tlteanoa The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Condition: good (used), Year of construction: 2000, functionality: fully functional, clamping force: 7,500 kN, Equipment: documentation/manual, Engel ES4550/750K-V (2000) Injection Moulding Machine – Technical Data Kfedsx Iu U Eepfx Aansa • Screw diameter: 90 mm • Shot volume (max.): 2480 cm³ • Injection rate (theoretical): 530 cm³/s • Specific injection pressure: 1910 bar • Increased injection pressure: 2180 bar • Plasticising capacity (standard screw): 70 g/s • Plasticising capacity (barrier screw): 118 g/s • Screw L/D ratio: 20 (standard) / 24 (barrier) • Screw speed: 140 rpm • Heating power: 67 kW • Number of heating zones (incl. nozzle): 7 Clamping Unit • Clamping force: 7500 kN • Holding force: 8250 kN • Opening stroke: 900 mm • Mould height min./max.: 400 – 1120 mm • Max. daylight: 2020 mm • Platen size (H × V): 1500 × 1390 mm • Tie bar spacing (H × V): 1025 × 925 mm • Tie bar diameter: 170 mm • Ejector stroke / force: 250 mm / 110 kN Weights & Power • Drive power (hydraulic pump): 75 kW • Oil volume: 1000 l • Injection unit weight: 10 t • Clamping unit weight: 30 t • Net machine weight (without oil): 40 t

Year of construction: 1970, condition: used, Woodchip Cooker for Kraft Pulpline Eucalyptus and Pine Wood Kjdpeixzxdsfx Aanefa Continuously KAMYR KVEARNER– Cooker, for 300 BDT/d Ktaft Woodpulp Capacity : 70 m3/h Temperature : 170 C Pressure : 8 – 9 bar

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 8,987 h, load capacity: 2,000 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, construction height: 2,160 mm, power: 27 kW (36.71 HP), Equipment: cabin, lighting, pallet forks, sideshift, trailer coupling, Vehicle description Diesel forklift LINDE H20D-03 Year: 2006 According to counter: 8,987 hours Kfedpfex Nal Eox Aansa 2-ton lifting capacity 2.16 meters overall height 4.70 meters lifting height 27 kW VW engine - Triplex full free lift mast - Side shifter - Full cab with heating - Lighting system - Original paint - Immediately operational Sales price: €7,950 net Affordable delivery available!

Condition: good (used), Baier Geba Hot Stamping Press This machine is in very good condition and ready to use. This machine is from the popular hot stamping manufacturer Gebrüder Baier KG, manufactured in Germany. Description The Baier Geba hot stamping press is a press for hot stamping, embossing, and die-cutting paper and plastics. It’s a useful device in any advertising agency or digital printing house. The manually operated pressure is powered by only 230V. A powerful pressure with adjustable pressure ensures repeatability and very high pressure of the die against the material. The machine features a worktop with a slide-out function, adjustable embossing depth, and a heating plate with a thermostat. Ksdpjx Hqnxsfx Aanefa Specifications: Heating temperature control Heating plate pressure mechanism: mechanical Press force: 5000 kg Power consumption: 9000 W Power supply: 230 V Machine weight: 300 kg Plate size: 32 x 21 cm.

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, total length: 14,759 mm, total width: 7,014 mm, total height: 4,314 mm, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, noise level: 85 dB, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. Kodpjxlc H Uofx Aansfa The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects

Year of construction: 2010, condition: ready for operation (used), functionality: fully functional, Industrial gas billet heating chain furnace for forging HEATING FURNACE WITH N°04 GUIDES – diam. Max 45 mm Complete with: Automatic load billet conveyor Electronic temperature control The CP Forni Heating Chain Furnace SM45 1400 4G 1Z is an industrial gas-fired chain furnace designed for the continuous reheating of billets, primarily for hot forging applications, such as brass or steel. The model designation likely indicates specific configurations, such as max temperature and number of guides. Kfjdpfx Aaex H Tk Nonja Key Features and Specifications Application: Reheating metal billets (e.g., brass, steel) for the hot forging process. Design: A continuous chain furnace, which allows for a consistent production flow, integrating easily into automated production lines. Heating Method: Industrial gas fired, with high energy efficiency and modern models incorporating heat recovery systems to reduce consumption. Temperature: Specific max temperature CP Forni chain furnaces for steel operate up to 950°C Control System: Equipped with a digital control panel, often a touchscreen, allowing precise management of all operating parameters, including temperature and transport speed.

Year of construction: 2008, condition: used, Model: SL-5A-K Refrigeration capacity: 15 kW Cooling capacity: 12 900 kcal/h Compressor input power: 3.7 kW Compressor power: 5 HP Refrigerant filling quantity: 2.5 kg Kfedpfjx H Rqaox Aanoa Water tank capacity: 90 L Evaporator type: Serpentine pipe type Freezing water pipe size: 1″ Freezing water flow rate: – 90 L/min – 5.4 m³/h Fan type: Axial flow type blower fan Fan motor power: 0.45 kW Safeguard: – High & low pressure protection – Compressor overload protection – Pump overload protection Power supply: AC 3 + N + PE, 50 / 60 Hz Dimensions (L × W × H): – 1100 × 680 × 1100 mm Weight: 160 kg

Condition: excellent (used), For sale: a set of professional SK40 AD/B 6×80 tool holders according to DIN 69871 standard. The holders are in good technical condition, complete – some fitted with VHM/HSS drills of various diameters. Shank diameter: Ø6 mm Length: 80 mm Clamping type: SK40, DIN 69871 AD/B standard Condition: used, fully functional, visible signs of use (discoloration from heat). Ideal for CNC machining centers, milling machines, and precision drill presses. Kjdpjxcx Uvefx Aanofa

Condition: good (used), functionality: fully functional, power: 16 kW (21.75 HP), fuel type: diesel, empty load weight: 2,262 kg, Year of construction: 2021, operating hours: 1,838 h, Equipment: adjustable chassis, cabin, Vehicle Description Mini Excavator CAT 302 CR Year: 2021 According to hour meter: 1,838 hours 2,262 kg 15.7 kW - POWERTILT - Hydraulic quick coupler - 3 buckets - Hydraulic adjustable undercarriage - Cab with heating - Lighting system Kfsdpfsx Nai Rsx Aanja - Immediately operational - Original paint - Regularly serviced machine Sale price: 23,500.-- net Affordable delivery available!

Condition: ready for operation (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, operation weight: 29,300 kg, maximum load weight: 36,300 kg, tire size: 29.5R25, tire condition: 40 %, shovel volume: 22 m³, Year of construction: 1996, operating hours: 14,212 h, machine/vehicle number: 2YR00353, Equipment: all wheel drive, cabin, hydraulics, Dump Height - 6580 mm Dump Angle - 55 degrees Scissor Tailgate Cab with Heat & A/C Tires - front 40%, rear 25% Kfsdpfsuzf Nrsx Aanea In good working condition! For more details, please feel free to contact us!

Condition: used, functionality: fully functional, power: 33 kW (44.87 HP), fuel type: diesel, empty load weight: 5,500 kg, Year of construction: 2018, operating hours: 8,678 h, drive type: Diesel, Mini excavator Condition: Ready for operation and fully functional Technical Condition: Good Description: Crawler excavator - Mini excavator YANMAR VIO 57-6A - Year of manufacture 2018 - 8678 operating hours - Winkelbauer POWERTILT - hydraulic quick coupler - 3 trench buckets 30 + 40 + 60 cm - 1 ditch cleaning bucket 140 cm - 5410 kg transport weight - 5480 kg operating weight - work lights - cab - heating - auxiliary hydraulics - 4-cylinder YANMAR diesel engine 45 hp - long dipper arm - without particulate filter - good bucket package - crawler excavator in GOOD ORIGINAL CONDITION!!! Quick coupler, buckets, 3rd valve, 4th valve, rear work lights, front work lights, heating, full cab, CE certificate, Kfedpfx Aox Iau Rjanoa

Condition: excellent (used), Year of construction: 1993, max. edge thickness coils 0.2 - 3 mm max. edge thickness solid strips15 mm feed speed 12/ 18 m/min glue plot heating time approx. 6 min autom. strip magazine coil magazine granulate heating pot flush trimming unit radius trimming unit operating panel extendable work piece support noice cancelation hood machine length 3800 mm Advise used machines: Kedofbr S Ropfx Aanefa • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 2015, clamping force: 2,200 kN, Equipment: documentation/manual, Controll : CC300 Clamping force: 220 t Injection unit Screw diameter: 45 mm (S8 Screw Geometrie G1, LD20) 30% GF Shot volume: 318 cm3 Type: Horizontal Drive: Hydraulic Clamping unit Min mould height: 300 mm max opening : 758 mm Equipment: Euromap 67 Mould heating controll 8 zones 2x Pneumatic valve 4x hydraulic valves 4x Core pullers Hours: ca 37000 Kfedpjx H Awlofx Aanea Wittmann W818-4597 available Complete machine data on request.

Condition: excellent (used), functionality: fully functional, Year of construction: 1997, operating hours: 7,594 h, load capacity: 2,500 kg, lifting height: 4,950 mm, fuel type: diesel, mast type: simplex, motor manufacturer: Isuzu, fork length: 1,150 mm, tire condition: 85 %, overall weight: 6,744 kg, empty load weight: 4,244 kg, color: yellow, tire size: 7.00 x12, 6.00 x 9, Equipment: adjustable boom, cabin, front guard, head guard, hydraulics, lighting, Sell forklift, - Hyster H2.50XMX Diesel engine isuzu year of manufacture 1997. - Load capacity 2.5T. - Side shift. - Heating inside. - Full lighting. Ksdpfoudi Hqjx Aansfa - General condition: very good. - Technical condition: very good. - Visual condition: very good.

Condition: refurbished (used), Year of construction: 1997, functionality: fully functional, pressing force: 250 t, installation height: 660 mm, table width: 760 mm, year of last overhaul: 2017, stroke length: 300 mm, For sale is a complete hot forging production line featuring the HYDROMEC HF2500 model press with a nominal capacity of 250 tons. This line is specifically designed for the high-efficiency, serial production of non-ferrous metals such as brass and aluminum. General Description of the Machine and Line Model: HYDROMEC HF2500 Condition: Used, inspected, and in working order. Application: Hot forging processes for brass and aluminum. Contents of the Complete System Main Forging Press (HF2500): - Force: 250 tons (t). - Operation Modes: Capable of both continuous and discontinuous operation. - Automation: Integrated rotary automation system for processing 1 or 2 pieces. - Auxiliary Presses: Includes vertical sub-press (mod. PM) and horizontal sub-press (mod. AP4), allowing for complex, angled, or orthogonal (perpendicular) punching/forming operations in addition to standard die movements. Gas Heating Furnace (TGV4P – 2500): - The furnace, integrated into the process, is used to bring raw material (rod or billet) to the required temperature before forging. Unloading Belt: - Conveyor system for the safe and automatic removal of hot, forged parts from the press. Summary of Technical Specifications Pressing Force 250 tons (t) Stroke Length 300 mm Strokes Per Minute 25 - 50 N. Closed Height (Installation) 660 mm Table Dimensions 760 x 760 mm Hydraulic Cushion Force 500 kN This line presents a turnkey solution, providing not only the main machine but also all auxiliary equipment and automation needed for the buyer to commence forging production immediately. Ksdpfx Aasx E U Ndsnjfa

Condition: new, mileage: 50 km, power: 130 kW (176.75 HP), fuel type: diesel, empty load weight: 2,540 kg, maximum load weight: 1,585 kg, overall weight: 4,200 kg, tire size: 205/75 R17,5, axle configuration: 2 axles, wheelbase: 3,750 mm, gearing type: automatic, emission class: euro6, suspension: steel-air, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, onboard computer, truck registration, | Iveco Daily Chassis NEW VEHICLE!! | Automatic, EURO 6 | Twin rear wheels | Air suspension on rear axle | Air conditioning, electric windows, heated electric mirrors | Radio/CD, roof hatch, spare wheel holder | Frame length: 4.20 m | Wheelbase: 3750 mm | Digital tachograph, reversing camera | Equipment list available on request | Technical GVW: 4200 kg | Subject to errors, input mistakes, and prior sale. Kedpfovz Aubex Aanjfa

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Kfjdpfxjx Hgmws Aanja Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: excellent (used), Hot Platen Press with Medium Heating Platens Pressing area 2750 x 1300 mm Number of press cylinders #6 Total pressing force 100 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load approx. 3.0 kW Space requirement (L x W x H) approx.: 3300 x 1450 x 1950 mm Weight: approx. 3700 kg Hydraulic Hot Platen Press Down-piston design Medium heating plates - for connection to the central hot water supply Pressure continuously adjustable via pressure switch Central control panel Analog temperature display for heating plates Safety ripcord Rack compensation Main switch Automatic opening Stroke limiter CE Kjdpfx Aajvzq Rkjnjfa NEW AL cover plates

Condition: like new (used), Year of construction: 2017, Machine: ENGEL VICTORY 500T / 7050 (Year 2017) Year of manufacture: 2017 Control unit: CC300 Operating hours: 565 h Availability: Immediate Clamping Unit: Clamping force: 500 tons Opening stroke: 1100 mm Distance between tie bars: 1500 × 1285 mm Platen size: 1500 × 1285 mm Minimum mould height: 500 mm Maximum daylight (open distance): 1600 mm Injection Unit: Screw diameter: 120 mm Screw length (L/D): 22 D Injection volume: 5430 cm³ Maximum injection pressure: 1600 bar General Data: Motor power: 98 kW Heating power: 30 kW Clamping unit weight: 31 tons Injection unit weight: 15 tons Machine dimensions (L × W × H): 10.50 m × 2.30 m × 2.30 m Options: Kfedpfx Aoxvingsanoa Core pullers: 3 Robot interface: No Bi-metallic screw/barrel: Yes Other equipment: STAUBLI magnetic platens, 24 hot runner heating zones Note: The machine has very low operating hours (565 h) and belongs to the modern ENGEL Victory tie-bar-less series, ideal for large moulds and high-precision production.

Condition: excellent (used), functionality: fully functional, mileage: 1,98,905 km, power: 110 kW (149.56 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,000 kg, first registration: 07/2019, next inspection (TÜV): 07/2026, emission class: euro6, color: white, number of seats: 7, number of previous owners: 1, Year of construction: 2019, machine/vehicle number: R-MM2244, Equipment: ABS, additional headlights, air conditioning, airbag, car registration, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, power assisted steering, sliding door, soot filter, summer tires, trailer coupling, Special equipment: Sale only to businesses or for export Audio system Composition Colour (radio/CD player, MP3 playback), Light & Sight package, exterior mirrors electrically adjustable, heated and folding, sound-insulating glass package, driver assistance system: parking sensors front and rear with reversing camera, freewheel coupling for dual-clutch transmission, Climatronic automatic climate control (cab + cargo/passenger area), fuel tank: 80 L, paintwork: two-tone finish, multifunction display Plus, digital radio reception (DAB+), hubcaps, spare wheel with road tires, cabin seats: driver and passenger seat heated, cargo/passenger area seats: 1st row, 2 swivel seats, towbar (socket and wiring), soft close for tailgate, soft close sliding door right side Kfodpfxjx Nbcls Aanea Additional equipment: Sliding door guide rail cover, passenger airbag deactivatable, driver/passenger airbag, convex exterior mirror left and right, exterior mirrors and door handles black, carpet flooring in cab, plastic flooring in cargo/passenger area, camping table, dual-tone horn, driver assistance system: brake assist (HBA), driver assistance system: multi-collision brake, fixed windows in cargo/passenger area: front and rear left, front and rear right, two folding remote keys, A-pillar grab handles, lockable glove compartment, tailgate with glazing, heated rear window with washer system, interior lights in cargo/passenger area: step illumination, interior filter: pollen filter, body type/build: bus, child safety locks on sliding doors, adjustable steering column (steering wheel), Bluetooth mobile phone interface, engine 2.0 L – 110 kW TDI, non-smoker package, wheelbase 3000 mm, tire pressure monitoring display, low emissions according to Euro 6d-TEMP, right-side sliding door cargo/passenger area, SCR system (AdBlue technology), side airbags / curtain airbags front, seat trim/upholstery: fabric, cab seats: comfort passenger seat, cab seats: driver and passenger height-adjustable, cab seats: comfort driver seat, cab seats: lumbar support driver and passenger, cargo/passenger area seats: 2nd row, triple bench seat, sunvisors with mirror, engine start/stop system, 12V outlet in cab, bumpers in body color, thermal insulation glazing, central locking with remote control and interior operation, auxiliary heater, permitted total weight 3.00 t

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, total height: 5,000 mm, pressing force: 200 t, total length: 4,300 mm, installation height: 5,000 mm, total width: 2,250 mm, clearance between the columns: 1,000 mm, table length: 850 mm, operating pressure: 250 bar, spindle diameter: 400 mm, reverse speed: 567 mm/s, table width: 800 mm, year of last overhaul: 2018, overall weight: 16,800 kg, stroke length: 200 mm, space requirement length: 4,300 mm, space requirement height: 5,000 mm, Equipment: airbag, crane, Refurbished and Automated Mecolpress 200L Hot Forging Press (Siemens S7 Controlled) We are offering for sale our Mecolpress 200L fully automatic hot forging press system, which is currently operating in our production line. The machine underwent a comprehensive overhaul and modernization in 2018. The system has been upgraded to meet current production standards, including a renewed electrical system and a complete automation package. It is fully operational and immediately ready for production. Main Features and Benefits - Complete Overhaul: All mechanical and hydraulic components have been serviced, worn-out parts replaced, and the machine's performance restored to factory specifications, ensuring long-lasting and reliable operation. - Modernization (Siemens S7): The electrical system has been completely renewed with Siemens S7 PLC and latest-generation automation components, enabling precise control, easy fault detection, and modern production monitoring. - Fully Automatic Cell: All processes from furnace loading to forging and unloading are fully automated, minimizing human intervention and increasing productivity. - Complex Part Manufacturing: The 5-axis AP4 sub-press unit allows production of parts with complex internal geometries (such as valve bodies, Y-fittings, etc.) that cannot be manufactured with standard presses. - Production Ready: The machine is currently in active operation and will be delivered to the buyer with a custom die set (flange and 4 inserts). Technical Data - Pressing Force: 200 Tons - Strokes per Minute: 85 - Ram Stroke: 200 mm - Table Dimensions: 850 mm x 800 mm - Distance Between Columns: 1,000 mm - Pneumatic Cushion Force: 17.5 Tons Kfjdpfjx E Untsx Aanea - Total Weight: 16,800 kg - Main Motor Power: 25 HP Included Equipment The system is sold as a complete cell: - Mecolpress 200L Press (Refurbished, Siemens S7 controlled) - CP mod. 140-4P Heating Furnace (automatic loading conveyor, 4-guide system) - AP4 Sub-Press Unit (5th axis/angled punching capability) - Complete Rotary Automation System (loading arm, IR sensors, grippers, unloading spoon, lubrication system) - Custom Die Set (including flange and inserts as per your drawing) Since the machine is actively in production, it can be inspected by appointment and tested under working conditions.

Year of construction: 1994, condition: excellent (used), Longitudinal Flow Dryer in Cabinet Design Internal chamber length approx. 4300 mm Internal chamber width approx. 750 mm Internal chamber height approx. 630 mm Chamber volume 2.3 m³ Side loading – cabinet version with loading trolley Vertical lift door, spring-assisted Manual / fully automatic control Electronic control MP 902 Longitudinal ventilation Fans: 1 unit Fan motor power 0.55 kW, 400 V, 50 Hz Heating electric 4.2 kW Required space approx. 5500 mm x 1100 mm x 1300 mm Weight INCLUDES: Aluminium stacking battens Wood moisture measurement probes Various spare parts Operating manual, electrical schematic, etc. Note on used machines: • Subject to technical changes and prior sale. • Prices quoted are ex-location – free loading! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid if made in writing. Kjdexug Dcopfx Aanjfa (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2003, Veneer Composing Machine Electric motor, separate for chains and glue application Glue is applied to the edge of the newly inserted veneer strip, which increases the strength of the glue joint. Robust, durable stainless steel conveyor chain with flexure joints Separate controls for temperature, speed, and pressure Quick and easily accessible glue tank for fast and convenient refilling or cleaning Kfjdpfoxgg Hhjx Aansa Multiple heating zones for individual temperature adjustment Extended glue tank lifetime due to integrated cooling unit Continuously adjustable feed speed INCLUDES GLUE COOLER Technical Data: Throat depth: 1200 mm Veneer strip width: 45–1200 mm Veneer strip length: 300–3200 mm Veneer strip thickness: 0.4 – 3.0 mm Veneer moisture content: max. 8–12 % Working height: 900 mm Feed speed: 5–50 m/min Heating zone length: 1000 mm Max. heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg SPARE PARTS VALUED AT EUR 3,500 HAVE BEEN INSTALLED

Condition: new, Hebrock Model F 2 next Offer type: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special offer price and full manufacturer warranty. The 3.3 m long F 2 is not only inexpensive and space-saving. It also has the equipment you need to process perfect edges right from the start: diamond-tipped jointing cutters guarantee excellently prepared workpieces for edging. The equipment includes a jointing unit (up to 2 mm milling depth), the top-mounted fast heating glue container, cross-cut saw and combination router. Optionally, the F 2 can also be equipped with a surface scraper. max. edge thickness: 3 mm max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touch screen) Hot melt glue application to the workpiece for edgebanding material up to 3 mm jointing cutter (incl. slide - tool) up to 2 mm milling depth Kfsdpfsl D Rp Esx Aanea maintenance-free glue basin with change basin pre-equipment incl. glue discharge device HF crosscut saw station (approx. 12000 rpm) HF milling station (approx. 12000 rpm) with separate pneumatic milling adjustment and interchangeable plate milling cutter (combination version) robust chain drive ball bearing mounted double roller top pressure viewing window from rear side of machine extractable workpiece support Including special equipment: F2/12 surface scraper (incl. pneum. lift) F2/30 pneumatic 3-point adjustment (radius- ,chamfer-, flush milling) F2/27 Nesting for milling stations