Used Heater 11 Kw for sale (43,478)

Condition: new, For sale: brand new KSB Etanorm SYT 50-32-250 centrifugal pump, supplied complete with 11 kW motor, mounted on a robust steel frame. The unit is factory new, year of manufacture 2023, from the renowned German manufacturer KSB – Made in Germany. The pump comes from surplus stock and has never been installed or used. KSB Etanorm series pumps are among the most widely used industrial pumps for applications such as: • Industrial systems • Process engineering • District heating • Industrial water installations • Cooling systems • HVAC installations Dcodpfjyt Ikpox Aa Nog Robust construction and high-quality workmanship. Technical Data • Manufacturer: KSB • Model: Etanorm SYT 50-32-250 • Type: ETNY050-032-250 SG DB08LD20110 • Year of manufacture: 2023 • Flow rate: Q 11 m³/h • Head: H 74 m • Impeller diameter: Ø 229 mm • Rotational speed: 2977 rpm Motor • Power: 11 kW • Power supply: 380 / 400 / 415 V • Speed: approx. 2950 rpm • Protection class: IP55 • Insulation class: F The pump is mounted on a robust steel transport base.

Condition: new, For sale: electric motor from the renowned manufacturer ATB Motorentechnik GmbH, made in Germany. Model CD160M-4, explosion-proof ATEX II 2G version, suitable for inverter operation. Technical data: • Power: 11 kW • Type: CD160M-4 • Voltage: 400 V Δ / 690 V Y • Current: 21 A / 12.1 A • Frequency: 50 Hz • Speed: 1460 min⁻¹ (4-pole) • Cos φ: 0.85 • Insulation class: F • Protection rating: IP55 • Weight: 168 kg • Year of manufacture: 2007 • ATEX: II 2G EEx de IIC T4 – motor for areas with explosive gas hazard • Shaft: diameter 42 mm, splined. Dedpfoxbd U Eex Aa Njcg

Condition: excellent (used), Gear motor Flender MBH 125CC-B 27.7/1 Helical bevel geared motor 11 kW at 1400 1/min. 230/400 V, 50 Hz, IP 55 were operated with frequency converters Dcedpfxjk E Htcj Aa Nsg Suitable frequency inverters Walther Flender ZZ0103069.34003 Sinus Penta available Altogether 15 geared motors and 12 pieces frequency inverters available !!! Very good condition, directly from production!!!

Condition: excellent (used), Three-phase motor, electric motor -Engine: unused -Power: 11 kW Dcsdpfxjcuta Ds Aa Njg -Speed: 2920 rpm -Shaft: Ø 38 mm -Design: B35 -Protection class: IP 55 -Dimensions: 500/345/H300 mm -Weight: 65 kg

Condition: good (used), Year of construction: 2006, radial fan, dust extraction blower, fan, extraction, dust blower, blower Dsdpog N Dhwjfx Aa Necg -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 11 kW 1460 rpm -Connection: Input 600x1220 mm -Connection: Output 680x680 mm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Condition: good (used), Year of construction: 1993, electric motor, three-phase motor -Manufacturer: Fimec, electric motor -Type: H132SD2VE -Power: 11 kW -Speed: 2800 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection rating: IP54 -Number: 4x motors available -Price: per piece -Dimensions: 480/255/H340 mm Dodpeyhnpujfx Aa Nscg -Weight: 53 kg/unit

Condition: good (used), Hydraulic power unit, hydraulic pump, universal power unit, hydraulic station -Manufacturer: Rexroth, hydraulic power unit, hydraulic station -Type: Rexroth AHAG -Pressure: 250 bar -Flow rate: 42 l/min / 2 working circuits -Motor: ABB 11 kW / 1455 rpm -Hydraulic reservoir: Tank capacity 160 l with level indicator Dodpfx Aaoy D Hhve Nocg -Return filter: RFBNHC 330F10 A1.X -Pressure reservoir: Hydac, capacity 10 l -Individual components: see photos -Dimensions: 1340/680/H1500 mm -Weight: 484 kg

Condition: used, used, in good condition, low hours Manufacturer: Schuko Type: L 350 Machine no.: 0-90390 Slow runner, approx. 1400 rpm Motor: 11 kW Connection diameter: 350 mm Pressure approx. 2229 m³/h Dodsycxgyopfx Aa Nscg Airflow: 9640 m³/h Steel impeller Required space approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee.

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Dcsdpfx Aajycxh Ds Neg Slow-running approx. 1400 rpm Motor: 11 kW Connection diameter: 400 mm Pressure approx. 1836 m³/h Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: good (used), Geared motor, electric motor, electric geared motor, variable speed geared motor, variable speed geared motor -Manufacturer: Lenze, adjustable geared motor with brake -Adjustment gear: 11.432.10.08.1 54 - 11 rpm -Brake: 14.448.08.1.0.8 8 Nm -Motor: Type B7KB4-044H 0.25 kW / 1390 rpm Dcjdpettimbofx Aa Nsg -Shaft: Ø 20 x 40 mm -Design: B3 -Number: 3x geared motors available -Price: per piece -Dimensions: 410/280/H200 mm -Weight: 16.7 kg/pc.

Condition: excellent (used), Loos 1000kW heating container emergency heating with gas burner Conversion to oil or biogas possible Dedpfxsy Evlto Aa Nocg

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished Rösler Hurricane H42 turbines - 11 kW. The stated price is per unit. Dodoyy Rybjpfx Aa Nocg

Condition: reconditioned (used), 1 pair of PERSKE flat motors, 5.5 kW each, well suited for pre-cutting circular saws in front of band saw lines, one with a right-hand thread and one with a left-hand thread, rated continuous power 5.5 kW, with new ball bearings, with 2 steel brackets (left and right) for mounting Dodpfeuqk Azex Aa Nocg 1 KATT circular saw flat motor, 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second shaft stub for hydraulic pump drive with 150 mm Ø pulley, tested and fitted with new bearings, suitable e.g. for PAUL 27 AO cross-cut saw

Year of construction: 2024, condition: new, A part of our machines is available IMMEDIATELTY. Dust collector 11 kW DCO-8L Overview Otinus DCO Dust Collector is a top level solution for industrial fume extraction systems. Powered by a SIEMENS-licensed motor, the duct collector creates the negative pressure to extract air contaminated with dust and harmful fumes from working area. The filtration process is carried out in a few stages. First, the air is directed to the inside of the unit through a spark arrestor, that slows down its flow and causes large particle to fall into the hopper. Small particles enter the filtration area with ultra-tightly adjacent cannister filters from well-known manufactures (H&V, Ahlstrom, TORAY). There, the air is cleaned and then transferred to other sections. The particles accumulated on filters are easily removed by a jet-pulse stream of compressed air controlled by solenoid valves with additional micro shaking of the filters. This solution greatly extends the life of filter cannisters and improves the cleanliness of the purified air. Particles that have fallen off the filters enter the hopper where they can be easily removed. Specifications - Well-known brand filters: H&V, Ahlstrom, TORAY - Filtration class F9 - Filtration accuracy: 99.99% - Airflow: 9000 m3/h - Tank pressure: 5000 Pa - Effective filtration area: 160 m2 - Motor: 11KW SIEMENS - Hopper volume: 90 L - Machine weight: 1200 kg - Default spark arrestor width: 303 mm Dsdpfx Aaevhcnzs Njcg

Condition: good (used), functionality: fully functional, MAPELLI 3-bag sawdust extractor 11 kW Specification: • Condition – used, serviced • Manufacturer – MAPELLI Djdpfx Aew U D Itoa Njcg • Turbine motor power – 11 kW • Turbine diameter – 70 cm • Bag shaking mechanism with control cabinet • Turbine inlet – 420 mm diameter • Filter area: 18 filter bags 25x160 cm • Airtight body with warm air return • Pipes and chimney from the photos included • Collection bag diameter – 3 x 600 mm • Overall dimensions – 395/290 x 105 x 380 cm (length/length without turbine x width x height) • Transport height – 280 cm + skids Additional information: • Good original technical condition • Photos reflect the actual condition of the item for sale • Possibility to power up and test the machine on site

Condition: used, Comprehensively tested and refurbished, used Greaves Model SH 15 stainless steel high shear mixer. Shaft approximately 1750mm long x 150mm diameter general purpose disintegrating head. Unit is direct driven by 11kw 415volt 3/50 motor. Reportedly suitable for 500-2000 litre batches. Dsdpfeymawhjx Aa Nocg Click on the link below to see a video of the machine running.

Condition: good (used), electric motor, three-phase motor -Manufacturer: Caenaho, electric motor from milling machine Stankoimport 6P/2 -Type: 4AM 132 M2 Y3 -Power: 11 kW -Speed: 2900 rpm -Shaft: Ø 38 x 80 mm -Design: B3 -Protection rating: IP44 -Dimensions: 520/290/H340 mm -Weight: 82.1 kg Dcjdpfxsycf Hao Aa Nsg

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 1450 rpm Dcjdjd I Al Rjpfx Aa Njg -Shaft: Ø 42 x 110 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 600/400/H320 mm -Weight: 123 kg

Condition: used, Gear motor, electric motor Dsdpfx Aecmtnkoa Nscg -Speed: 11 rpm -Power: 0.18 kW -Brake: 380 V -Construction: angle B3 -Diameter shaft: Ø 25 mm -Protection class: IP 65 -Weight: 20 kg

Condition: used, Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill Dcedpfjg D H Dcex Aa Nog -Power: 3 - 11 kW -Speed: 220 - 3200 rpm -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg

Operating hours: 1,015 h, condition: used, Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit for: power chucks -Drive motor: Ziehl-Abegg type HYDT.132,28-4 -Motor: 11 kW 1420 rpm Dcedefcw Twopfx Aa Nog -Dimensions: 1300/400/H820 mm -Weight: 270 kg

Condition: used, Three-phase motor with 2 speeds, electric motor -Transfer in current condition as seen -Power: 3/11 kW -Speed: 720/1450 rpm -Shaft: Ø 42 mm -Construction: B3 -pole changing -Protection class: IP 54 -Price: per piece -Number: 1x available -Dimensions: 600/390/H320 mm Dedpfx Aascnha He Nscg -Weight: 108 kg

Condition: used, Three-phase motor, electric motor -Power: 11 kW -Speed: 3000 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 Dcsdpfx Aaecwn Eio Nog -Dimensions: 590/380/H380 mm -Weight: 116 kg

Condition: used, adjustable gear motor, electric motor, three-phase motor -Motor type: FNDeA34s -Gearbox type: 2V4M -Speeds: 11-98 rpm -Power: 0.09 kW -Construction: B3 -Diameter shaft: Ø 10 mm -Protection class: IP 44 -Number: 1x motors available Dodpfxodfavis Aa Nocg -Price: per piece -Dimensions: 320/105/H165 mm -Weight: 6.9 kg/piece

Condition: used, Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 11/21 rpm Dsdpfechq Ihsx Aa Necg -Power: 0.2/0.28 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Brake -Dimensions: 450/200/H220 mm -Weight: 24 kg