Used Heckert Cwk 400 D for sale (74)

Condition: good (used), Heckert CWK 400 Year of construction 1995 Codpfx Aoru H T Isbcjrh Control Siemens 840 Travel X/Y/Z 650/650/680 mm Spindle speed up to 10,000 rpm HSK 40 Tool changer Rotary table 400 x 500 mm, chip conveyor Weight 12.5 tons.

Condition: good (used), Year of construction: 2002, Heckert CWK 400 D, year 2002, Siemens 840 D control, X/Y/Z travel 650/650/650 mm, 240-position tool changer, HSK 63 spindle taper, spindle speed up to 10,000 rpm, internal coolant supply 30 - 50 bar, NC rotary table Ø 460 mm, six-pallet changer 500 x 400 mm, chip conveyor, new spare spindle, 25 HSK holders. Crsdpfxjw Uf Hks Abcoh

Condition: excellent (used), Year of construction: 1995, machine/vehicle number: 18049, Controller: Siemens 840 x-travel: 650 mm y-travel: 650 mm z-travel: 650 mm Table: 400 x 400 mm Spindle speed 10.000 rpm Rapid traverse 30 m/min Number of pallets 8 Codewn Exzspfx Abcerh Change time of pallets 8 sec Power capacity 35 /24 kW Total power requirement 65 kW Tool changer SK 40 Machine weight: 13.000 kg Machine dimensions: 4730 x 3252 x 2650 mm

Condition: used, Year of construction: 2003, x-travel 800 mm y-travel 600 mm z-travel 805 mm Control Sinumerik 840D weight of the machine ca. 13 t 1 horizontal machining centre Make: HECKERT type: CWK 500D year 2003 serial no. 16087 control, make: Siemens, type: Sinumerik 840D travel X/Y/Z 800 x 600 x 805 mm 2-fold pallet changer pallet size 500 x 500 mm NC-rotary table 360 x 0,001° 60-fold tool changer, tool holder HSK 63 Speed max. 15,000 rpm IKZ 50 bar Crsdpfx Ajuddgfjbcjh Operating hours 32,450 Spindle hours 6.080 Accessories: Coolant temperature control, belt filter, chip conveyor, spindle cooling, Infrared probe preparation

Condition: used, Rotary table, rotary indexing table, dividing head, dividing head -Manufacturer: WMW Heckert, rotary table type D 315 k TGL 28561/02 -Clamping surface: O 315 mm -Height: 140 mm -Groove: 14 mm Codpfxog Rczfe Abcorh -Dimensions: 615/540 / H150 mm -Weight: 83 kg

Year of construction: 2001, condition: good (used), machine/vehicle number: WAG737, Size: 630 x 630 mm Threaded hole tight to DIN 55201 available: 10 units Csdsddxd Tspfx Abcjrh

Condition: used, Technical details: Cedpou N Dz Aofx Abcorh table diameter: 315 mm rotatability of the table - manual/mechanic: 360 ° weight of the machine approx.: 100 kg dimensions: 620 x 530 x 135 mm The tables were rarely used other features: -with radial scale -surface is finished -center mounting MK3 -dividing circle 19 / 27 / 31 / 41 / 49 / 59 -operation also possible by machine via coupling on both sides (switchable right-/left-hand rotation with automatic changeover) -foot clamping: support size 360 x 420mm with 1 clamping groove on the front side 16 x 200mm *

Condition: excellent (used), Year of construction: 2005, Machining center CWK 400 Year of manufacture: 2005 X travel: 650 mm Y travel: 650 mm Z travel: 650 mm Rotary table (4th axis) Crodpfswpciaox Abcsh CNC: Siemens Sinumerik 840 D Table length: 400 mm Table width: 400 mm Workpiece weight: 400 kg Operating hours: 42,000 h Tool changer chain magazine: 80 tools, HSK 63 2-pallet pool Weiss motor spindle: 36 kW, 18,000 rpm Accessories and 60 tools included

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 17037, travel distance X-axis: 1,050 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,160 mm, workpiece weight (max.): 1,000 kg, rotational speed (max.): 10,000 rpm, number of slots in tool magazine: 240, No reserve price - guaranteed sale at the highest bid! Incl. refurbished second spare spindle and refurbished drive motor. Machine with rotary pallet storage and extended tool magazine! TECHNICAL DETAILS X-axis: 1,050 mm Y-axis: 1,000 mm Crodpfx Abjv Ai Uwoceh Z-axis: 1,160 mm Distance from spindle front edge to workpiece carrier center: min. 190 mm Distance from spindle center to workpiece carrier top edge: min. 100 mm Spindle Speed range: 50 - 10,000 rpm Motor power (40% duty cycle): 31 kW Motor power (100% duty cycle): 19 kW Torque (40% duty cycle): 200 Nm Torque (100% duty cycle): 165 Nm Spindle mount: SK-50 Tools Chip-to-chip time (at rapid traverse 40 m/min): 8 s Tool diameter (with free neighboring positions): 250 mm Tool diameter (with occupied neighboring positions): 125 mm Tool length: 800 mm Tool mass: 35 kg Total mass of all tools in the storage: approx. 720 kg Number of tool positions: 240 Measuring system Type: Linear, optical-incremental, distance-coded Accuracy class: ±5 µm Division period of the grating division: 20 µm Input and display unit: 1 µm Pallets Clamping surface: 630 x 630 mm Loading mass per pallet (at rapid traverse 40 m/min): 1,000 kg Permissible moment with off-center load: 750 Nm Directional bore diameter: 25 H6 Hole distance to table center: 200 ± 0.013 mm Fastening thread: 23 x M16 Workpiece clearance height: 1,200 mm Maximum interference circle: Ø1,100 mm (flattened) Automatic pallet change Number of changeable pallets: 2 + 4 pallets in the circular storage Pallet change time (for standard version): 12 s Pallet change time (for version with clamping hydraulics at least): 14 s MACHINE DETAILS Dimensions: 8,200 x 4,400 x 3,600 mm Weight: 18 t Connection power: 75 kVA Temperature range: 10 - 35 °C Sound pressure level: < 80 dBA

Condition: used, Year of construction: 2008, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 680 mm, spindle speed (max.): 24,000 rpm, Order no. 5.3-745 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 1 used Horizontal Milling Center Heckert HEC 400D, built 2008 CNC control Sinumerik 840D NC rotary table B-axis Magazine for 80 tools Pallet changing device, 2 pallets 400mm x 400mm Crodpfx Aborairwjcjh Internal coolant supply IKZ chip conveyor Coolant device CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 80 tools pallet changing device, 2 pallets 400 mm x 400mm coolant through spindle device IKZ chip conveyor coolant device Technische Daten / technical details: X-travel longitudinal 650 mm Y-travel vertical 650 mm Z-travel cross / Z-travel cross 680 mm B-axis / B-axis 360 ° Spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 24000 Upm /rpm Werkzeugplätze / tool places in changer 80 Gewicht der Maschine ca. / weight approx. 13000 kg Technical data, accessories and description of the machine are not binding - Technical data, accessories and description of the machine are not binding.

Condition: used, Year of construction: 1977, Control type: conventional Axis travel: X: 1120 mm Y: 345 mm Z: 400 mm Vertical feeds: 5 - 250 mm/min Longitudinal and transverse feeds: 16 - 800 mm/min Table area: 400 x 1600 mm Crsdpswdivvefx Abcjh Speed range: 28 - 1400 rpm Tool holder: SK50 Total power requirement: 14.5 kW Machine weight approx.: 3.65 t Space requirement approx.: 2345 x 1950 x 2060 mm (LxWxH) External control cabinet with plug-in connections. Equipment: - 3-axis digital display - Pivoting control panel (suspended) The machine can be tested/demonstrated live on-site. All information is provided without guarantee. Subject to prior sale.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 14023, travel distance X-axis: 1,140 mm, travel distance Y-axis: 910 mm, travel distance Z-axis: 875 mm, rapid traverse X-axis: 60 m/min, torque: 1,000 Nm, controller manufacturer: Siemens, controller model: 840 D, spindle speed (min.): 6,000 rpm, coolant supply: 60 bar, distance table center to spindle nose: 240 mm, Equipment: chip conveyor, documentation/manual, Siemens 840 D with network connection Renishaw OMP2 measuring probe Credpfx Abov Npm Hocsh SK50 DIN 69871 - pull stud DIN 69872 6000 rpm, 2 gear stages, max. torque 1000 Nm 80-position tool chain 2 pallets 800x800 M16 hole pattern High-pressure coolant through spindle 50 bar Knoll paper belt filter and chip conveyor Year of manufacture Dec. 1999 (max. 1-shift operation)

Year of construction: 1988, condition: used, table diameter 400 mm table load 0,126 t table height 100 mm weight 126 kg Cedpeipyx Njfx Abcsrh Dividing rotary table with 400 mm diameter of a Heckert FSS 400.

Condition: new, functionality: fully functional, Spare parts for Fritz Heckert milling machines F315, F400 - even for the oldest ones. We offer a full range of spare parts for milling machines – the old and new German WMW HECKERT milling machines F315, F400, FSS-350MR, FSS-400MR, FU-350MR, FU-450MR, FU-350ApUG, FU-450ApUG, FU-350MRApUG, FU-450MRApUG. In our stock one can find: milling machine head and all gears for it, dividing heads, lunette/rests, all electromagnetic clutches and brakes, shafts, bevel gears, worms and worm gears, pulleys, levers, longitudinal and cross screws, nuts, oil pumps, cooling pumps, spindles, quills, hydraulic dividers/distributors etc. Csdpevtnfpjfx Abcorh All the original parts for Heckert milling machines we can offer directly from stock, ready for immediate shipment. All parts are new, executed in German quality, and meet the highest technical standards.

Condition: excellent (used), Year of construction: 2015, Summary of the technical specifications of the Starrag Heckert HEC400D (built in 2015): ### Basic data - Control: SIEMENS 840D sl HMI Operate - Travel ranges: - X/Y/Z: 650/650/680 mm - B-axis: 0–360° (full-fledged 4th axis) - Speeds: - Rapid traverse X/Y/Z: 65 m/min - Milling feed: 1–65,000 mm/min - Acceleration X/Y/Z: 9/9/8 m/s² - Feed forces: - 60%: 9,000 N | 100%: 7,500 N ### Rotary axis (B-axis) - Manufacturer: Fertigungstechnik Weißenfels GmbH - Max. rotation: 80 rpm - Indexing: 0.001° - Torques: - Clamping torque: 3,000 Nm - Tilting torque: 5,000 Nm - Continuous torque: 550 Nm ### Pallet changer - Number of pallets: 2 (machine/setup station) - Pallet size: 400 × 500 mm - Load capacity: 500 kg/pallet - Changeover time: 8–10 seconds Cedpfev Snvrjx Abcsrh ### Tool magazine - Capacity: 60 pockets - Tool holder: HSK-A63 - Max. tool diameter: Ø80 mm (Ø160 mm with free adjacent pockets) - Max. tool weight: 10 kg - Chip-to-chip time: 3–4 seconds (depending on weight) ### Spindle - Speed: 50–10,000 rpm - Drive power: 31/24 kW - Coolant: 7 pressure levels up to 50 bar (optional 80 bar) ### Accuracy - Positional uncertainty (X/Y/Z): 0.006 mm - Positional variation (X/Y/Z): 0.004 mm - Reversal range (X/Y/Z): 0.003 mm - B-axis: 6 arcsec (uncertainty), 4 arcsec (variation) ### Other - Noise emission: ≤80 dBA - Coolant volume: 420 liters (standard) / 2,250 liters (optional) - Machine weight: approx. 12,000 kg (without accessories) - Operating voltage: 400 VAC, 50 Hz - Pneumatics: 6–8 bar input pressure ### Special features (optional) - High-performance spindle: 10,000 rpm, up to 37 kW for heavy-duty machining - Air extraction: EU13 filter (99% purification) - Water jet: 70 l/min coolant flow ### Additional features - Remote diagnostics, pallet sequence operation, operating hours display, German/English interactive interface. The machine is painted in RAL 7035/7005/7016 and has a closed work area enclosure in accordance with accident prevention regulations.

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm Codpfx Ajurvl Rebcjrh main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Condition: ready for operation (used), Year of construction: 2005, General Data Measurements width 4800 mm Measurements depth 5800 mm Machine weight 12800 kg Control Unit Brand SIEMENS Model Sinumerik 840D Main Drive Spindle speed range 10000 Spindle motor power 24 kW Number of axis 4 Movement X-Axis Movement 625 mm X-Axis Rapid Traverse 40 m/min Y-Axis Movement 650 mm Y-Axis Rapid Traverse 40 m/min Z-Axis Movement 650 mm Z-Axis Rapid Traverse 40 m/min Table Table load 4000 kg Tools Max weight 10 kg Max tool diameter 80 mm Max tool length 350 mm Type of tool holder DIN 69893-HSK-A63 Media Chip conveyor Yes Additional Equipment Renichaw measuring probe Tool breakage detection: Yes, in tool magazine Flushing gun at the setup station Waterfall shower Paper belt filter Pallet sequential operation Enclosed work area enclosure according to UW Csdexllp Sepfx Abcjrh Computer connection via Ethernet interface Network connection This 4-axis Starrag Heckert Dynamic CWK 400D was manufactured in 2005. It features a Siemens Sinumerik 840D control system, spindle speeds up to 10,000 rpm, and a dual pallet system with rapid 8-second pallet changes. The machine includes a tool magazine with 60 positions and a high-capacity coolant system. Ideal for complex machining tasks. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2007, travel distance X-axis: 750 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 725 mm, CNC control Sinumerik 840D NC-rotary table B-axis automatic tool changer for 320 tools pallet changing device, 2 pallets 500 mm x 500mm Crjdpfx Aoq Ui Hqjbcjh coolant through spindle device IKZ (80 bar) chip conveyor coolant device Technische Daten / technical details: X-Weg längs / X-travel longitudinal 750 mm Y-Weg senkrecht / Y-travel vertical 750 mm Z-Weg quer / Z-travel cross 725 mm B-Achse / B-axis 360 ° Spindelaufnahme / spindle taper HSK 63A Drehzahlbereich Spindel / spindle speed 50-10000 Upm /rpm Werkzeugplätze / tool places in changer 320 Vorschub / infeed 60000 mm/min Eilgang / rapid feed 60 m/min Antriebsleistung Spindel 40/100% ED / drive capacity spindle 40/100%ED 37/24 kW Gewicht der Maschine ca. / weight ca. 15000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Condition: like new (used), functionality: fully functional, Manufacturer: WMW Machine: Gear shaping machine Model: ZSTWZ 1000 X 10 Serial number Condition: Excellent Total machine weight: 6.8 tons TECHNICAL DETAILS Max. working width: 160 mm Max. module: 12 Distance between table and spindle: 530 mm Table diameter: 900 mm Table bore diameter: 125 mm Internal gear diameter: 1250 mm External gear diameter: 1350 mm Cjdpfxjxlag Es Abcsrh Cutter bore: 31.75 mm Number of ram strokes: 45-280 Depth of hole: 700 mm Electrics - Voltage/Frequency: 380/50V/Hz Total power requirement: 8.8 kW Machine dimensions: 3000 x 1200 x 2300 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 7486, total height: 1,295 mm, total width: 480 mm, total length: 620 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 450 rpm, spindle mount: MK 2, overall weight: 165 kg, drilling stroke: 100 mm, Solid bench drilling machine for individual or series production in good condition (used). Crodpfowgfkuox Abcjh

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm Cjdjvcrmpjpfx Abcerh throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: good (used), Year of construction: 1986, Drilling capacity in steel diameter: 40 mm Cjdpfxsxbynne Abcsrh Drilling capacity in cast iron diameter: 50 mm Throat (arm reach): 320 mm Quill stroke: 185 mm Spindle speeds - stepless: 63 ... 1000 rpm, 9 steps Power: 4.2 kW

Condition: used, Vertical milling head, milling head, angle milling head WMW HECKERT Crsdpfx Abexcbp Ajcoh Year of manufacture: approx. 1985 Tool holder: SK 40 Quill stroke: approx. 85 mm Centre diameter at the flange plate: 200 mm Bolt circle diameter at the flange plate: Ø 175 mm Mounting threads at the flange plate: 4x M16 - Head drive with splined shaft - SK40 adapter for head drive via splined shaft - Degree scale on the angle milling head 2x 90° - Draw bolt for tool holder with M16 - Solid intermediate flange for adapting to a WMW FW 250x1000 milling machine Dimensions L x W x H: 530 x 380 x 240 mm Total weight: 95 kg In good condition

Condition: excellent (used), functionality: fully functional, Make: WMW (Germany) Model: GFL 1000 Center Height: 210 mm Max. Workpiece Length: 1000 mm Max. Workpiece Diameter: 200 mm Max. Swing Diameter over Bed: 410 mm Availability: In Stock WMW (Germany) Worm & Thread Milling Machine in excellent working condition. Model: GFL 1000. Max. workpiece diameter: 200 mm. Max. workpiece length: 1000 mm. Capable of worm milling, thread milling, spline milling, as well as spline and gear hobbing operations. Technical specifications: - Manufacturer: WMW (Germany) - Model: GFL 1000 - Centre height: 210 mm - Max. workpiece length: 1000 mm - Max. workpiece diameter: 200 mm - Max. swing diameter over bed: 410 mm - Cutter speeds: 28 rpm to 250 rpm - Max. cutter diameter: 125 mm - Spindle bore: 75 mm - Cutter head swiveling range: +112° to -62° Additional equipment: - Includes approximately 136 spare cutters - Equipped with steady rest, job support, change gears, and additional accessories The machine is in excellent working condition. Cjdpfexlagrex Abcerh

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m Csdpfx Aoxddqrebcjrh • cube table 650 x 650 x 500 mm, • coolant device