Used Heidelberg Ks for sale (338)

Condition: good (used), Year of construction: 2010, Combination Folding Machine - FFH flat pile feeder with TREMAT separation head - MCT central control unit - 1st folding station = BUH-56 with 6 folding pockets - downstream knife shafts Hedpfx Aajx R Upbomsh - KTL cross-fold unit with 2 folding knives - 1 horizontal folding pocket after the first knife fold - sheet ejection for misfed sheets - swiveling control panel at the cross-folding unit - ACC-2.4 control unit for gluing device and gatefold pocket - soundproof hood - SPH-70 shingle delivery with pressing unit - compressor - coupling box - accessories, technical documentation

Condition: good (used), Year of construction: 2009, Combination folding machine • MCT control system • PFH-82 pallet feeder with TREMAT suction and separation head • 1st folding station: BUH-78 with 4 combination folding plates • Soft-PU folding rollers • downstream knife shafts • KTL cross-fold unit with 2 folding knives • 1 horizontal folding plate after the first folding knife • Noise protection hood • Swiveling control panel at cross-fold location • SPH-70 shingled stream delivery with pressing unit Hsdpfxsx R Ulvj Aamsh • Compressor

Condition: good (used), Year of construction: 2007, • PFH-82 pallet feeder with TREMAT suction head and extra stacking table • Swivel-mounted touch monitor, MCT control system • 1st folding station 1.BUH-82 with 6 folding pockets • Soft-PU folding rollers • Downstream knife shafts with various tools • Cross-folding unit BCUH-78, KL version with 2 folding knives • Additional swiveling control panel at the cross-folding unit • Noise protection hood • Compressor Hedpfx Asx R Ui Ijamoh Connected with: B) Automatic Bundle Delivery Make: Palamides Type: delta-703 Format: 76 x 30 cm Year of manufacture: 2009 Machine no.: 2307 • Working width 700 mm with triple banding • Quick set-up mode without tools • Automatic format detection and waste gate for consistent production without misaligned sheets in the stack • Small format equipment for minimum 90x65 mm • Pressing station with pre- and main press rollers with up to 3.5 t pressing force • Package pressing • Jogger station • Banding of stacks in the magazine chute • Banding with paper and plastic • Robust and reliable electronic impulse welding system (EIS) • Package lift output (single-operator handling for folding machine and Palamides) • Delivery system is mobile for quick changeovers between different machines • Various operating modes: shingle or single sheet feeding • Quick adjustment, counter, stick bundling Technical Data: • Package height min.: 20 mm • Package height max.: 150 mm • Performance: 600 packages/h per cycle • Speed: 15 – 200 m/min (up to 60,000 items/h) • Infeed height: 410 – 1000 mm • Electrical connection: 6 kW • Compressed air: 6 bar dry air, to be supplied by the customer Please contact us for further details.

Condition: good (used), Year of construction: 2009, Combination Folding Machine • Automated combination folding machine • MCT control with preset system • PFH-82 pallet feeder with TREMAT suction head • First folding station 1.BUH-82/4 with 4 motorized, individually adjustable combination folding plates • Motorized, adjustable soft PU folding rollers • Subsequent knife shafts with lift function • Crossfold unit, KTL version with 2 fold knives and 1 horizontal folding plate • Motorized adjustable functions • FFP pneumatic window folding plate with motorized stop • ACC-2.4 control unit • Swiveling touch monitor for machine operation Hsdpsx R Uibsfx Aamsh • Soundproof hood • Twinstacker TSH-70, 2009, bundle delivery with • Press function and 2-level roller delivery to the left • Compressor

Condition: good (used), Year of construction: 2001, Combination Folding Machine • DCT control system • PD-66-1 pallet feeder with TREMAT separating head and stacking plate • 1st folding station with 4 folding pockets • downstream knife shafts Hjdpfx Asx R Uhwoamsh • crossfold unit KL version with 2 folding blades • gluing system with ACC-2.4 control unit • noise protection hood • swiveling control panel at crossfold unit • SB-66/MP.D, vertical stacker output with press station • compressor (DV pump)

Condition: good (used), Year of construction: 2010, Max. performance: 9,000 T/h 3 double feeders DVA (= 6 feeders) 1 cover feeder UFA-100 - Stitching station HS-100 - Hohner stitching heads (standard + loop) - Ejection of faulty sheets - Trimmer TR-100 - Stream delivery SA - Compressors - Accessories Saddle-stitcher line Hedpfx Aox R Ugyeamoh Speed: 9,000 cycles/h 3 double feeders DVA-100 (6 feeders) 1 cover feeder UFA-100 - Stitching station HS-100 - HOHNER stitching heads (standard + loop) - Eject station for faulty products - 3-knife trimmer TR-100 - Stream delivery SA - Compressor support for complete feeder line - Accessories

Condition: good (used), Year of construction: 2009, Heidelberg Suprasetter A52 / 75AL automatic plate loading, plate stacker PST 26, including Meta Shooter Prinect 19 1 laser head – 162,000 imaged plates Hedjx R Uf Nopfx Aameh – approx. 4,300 laser hours Thermal laser: 830 nm Resolution: 2540 dpi Minimum format: 240 x 240 mm Maximum format: 656 x 760 mm Inline punch: Bacher 425 mm Plate thickness: 0.15–0.30 mm Plate throughput: 17/20 plates per hour Base unit dimensions: 1,550 x 1,218 x 1,350 mm

Condition: like new (used), Year of construction: 2012, 2540 dpi resolution, internal plate punch Bacher 425 and 780 mm, with dual plate loader for 2x 100 plates, plate stacker GrafoTeam PST 3360-L, Shooter Software and Prinect Workflow Hodjx R Uf Aspfx Aameh

Condition: used, Year of construction: 2001, Combi Folding Machine Hsdpfxox R Tlus Aamoh - Fi-55 flat pile feeder with TREMAT separating head - 1st parallel folding station with 4 combi fold pockets - downstream knife shafts - KTL crossfold unit with 2 folding knives - 1 horizontal pocket after the first folding knife - FFP pneumatic window fold pocket - ACC-2.4 control unit (for window fold pocket or gluing device) - noise reduction hood - central control panel DCT-500 - SA-66-K/MP.D shingled stream delivery with press station and marking device, year 2000 - compressor

Condition: good (used), Year of construction: 2002, Buckle Folding Machine - Fi-52 flat pile feeder with TREMAT - 1st folding station, 52 cm, with 4 folding pockets, partially motorized adjustment - Glue system with ACC-2.4 control unit - 2nd folding station, 52 cm, with 4 folding pockets, partially motorized adjustment Hsdpfx Aex R Tlheamsh - Downstream knife shafts in both folding units - Central control panel DCT-500 - SBP-46, No. 117702/98, year 1998, delivery stacker with press station and marking unit - Compressor

Condition: good (used), Year of construction: 2004, Saddle Stitcher Line Make: HEIDELBERG Type: Stitchmaster ST-400 Format: 320 x 480 mm Year of manufacture: 2004 Max. Speed: 14,000 cycles/h Machine no.: FJ.DFA0-000152 - Touch-screen control of all functions - Automated format pre-settings - 7 drum feeders (4x TAS/vertical + 3x TAL/horizontal) - Cover feeder UFA-400 - Sheet size monitoring - Stitching station HM-400 - HD/MM stitching heads (4x standard + 4x eyelet heads) - 4 jumbo spool holders - Stitching wire transport equipment - Staple monitoring - Misfeed reject and delivery - 3-knife trimmer TR-400 - Cut monitoring - Center cut device MS - Punch cutting device with air blast system - Various punching dies (6, 8, and 12 mm) - Spare knife sets - Compensating stacker RIMA RS-10-S/2001 - 1 extra flat belt delivery - Compressed air supply for 7 feeders and UFA Hsdpex R Ti Tefx Aamjh - Tools, accessories, technical documentation - 2 additional TAS-400 feeders in reserve, including frames, transport chains, and accessories Non-binding offer

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system Hsdpjx R Tiajfx Aamsh - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: good (used), Year of construction: 2004, only approx. 45 million impressions, Plus Version, CPC control with integrated register, Alcolor, Autoplate, Baldwin dampening circulation and cooling, blanket washing device, pull mark control, ultrasonic double sheet control, sheet decurler, Mediprint powder unit Hedpfx Aox R Tgrsamsh

Condition: good (used), Year of construction: 2007, approx. 67 million impressions, EasyPlate, Alcolor, Technotrans dampening solution circulation and cooling, CPC control with integrated register, ink unit washing device, SuperBlue, pull mark control, ultrasonic double sheet control, sheet decurler, powder device Alphatronic 200, antistatic device Compact Hjdpfox R S Tdex Aamoh

Condition: good (used), Year of construction: 2007, material: up to 0.6 mm only approx. 95 million impressions CP 2000 Axis Control Autoplate all washing units powderspray Grafix Alphatronic 200 High pile delivery IR dryer Hodpex R Sxyefx Aamjh

Condition: like new (used), Year of construction: 2009, approx. 155 million impressions, perfecting 2/2 or straight 4/0 Hsdpsx R Svfsfx Aamoh InpressControl, WallScreen, Alcolor Vario, Autoplate, chamber doctor blade, PerfectJacket, impression cylinder washing system, blanket and ink unit washing system, ultrasonic double sheet control, extended delivery 2 modules (X2), dryer HD Version 2, water-cooled dryer cabinet, powder unit WEKO AP 262, antistatic device Compact, air supply AirStar Pro water-cooled

Condition: good (used), Year of construction: 1995, Approx. 208 million impressions, CPC control ClassicCenter, Alcolor dampening system, Autoplate automatic plate changer, Technotrans central air-cooled unit, ink unit wash device, blanket cylinder wash device, chromed plate cylinder, pull mark control, high pile delivery, sheet decurler, Alphatronic 200 powder sprayer, Eltex antistatic device. Hedpfx Asx R Sqisamjh

Condition: good (used), Year of construction: 2006, only approx. 145 million impressions Perfecting 2/3 or straight printing 5/0 Prinect AxisControl, CP 2000, Alcolor Vario, Preset feeder, Ink unit temperature control, Ink unit washing device, Blanket and impression cylinder washing device, Technotrans CombiStar CAN (air-cooled), Extended delivery, 2 modules (X2), DryStar 2000 air-cooled, Hjdox R Snhepfx Aameh PowderStar AP 232 powder sprayer, Chamber doctor blade system (coating unit), Anilox roller, StaticStar Compact antistatic device, RSP inline finishing system, Air supply via AirStar, air-cooled

Condition: good (used), Year of construction: 2006, only approx. 110 million impressions, CP 2000, Axis Control, Alcolor Vario, Preset streamfeeder, air-cooled ink temperature control, program-controlled washing units, coating unit with chamber doctor blade system, powder device Weko AP 262, air supply AirStar Pro air-cooled, perfecting 1/4 or straight printing 5/0 Hjdjx R Sl Tepfx Aameh

Condition: like new (used), Year of construction: 2009, Approx. 240 million impressions, perfecting 1/4 or straight printing 5/0 PressCenter, WallScreen, Autoplate, Preset Plus feeder and Preset Plus delivery, CombiStar dampening solution circulation and cooling, Technotrans, ink roller cleaning system, tandem wash concept, blanket cylinder chromed, blanket washing device, PerfectJacket, CleanStar, powder sprayer WEKO AP 500 Duo, Compact antistatic device, AirStar Pro water-cooled air supply. Hsdpsx R Sltjfx Aamsh

Condition: like new (used), Year of construction: 2010, Speed: 15,000 sheets/hour Counter: approx. 170 million impressions (August 2025) Specifications: Press Center Alcolor dampening Technotrans refrigeration Combistar CAN Ink agitators for UV ink Autoplate Automatic roller washer Automatic blanket washer Automatic impression cylinder washer Hjdpfx Aasx R Shnsmeh Ink temperature control Preset Plus feeder Preset Plus delivery Manual non-stop feeder and delivery Ultrasonic double sheet detector Extended delivery X(3) Press raised by 50 cm Foil kit Weko AP262 powder spray Coating units with 3x coating pump IR/UV drying system UV interdeck after units 1, 2, 5 & 6, with variable positions IR interdeck in unit Y1 Hot air interdeck in unit Y1 IR/hot air/UV with 3 UV lamps in the delivery

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: PJ000016, (processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, external compressed air supply required XXX – suction device for removing plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Hjdpfxevw Afxo Aamsh Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2002, Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 The line consists of: - 4 x Inserter stations - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder Hodpfx Aoxmhrfoamoh - 1 x Duplex sheet inspection unit - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x Cross stacker RIMA

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 013910086, CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Hedjimbp Ropfx Aameh Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Hjdpfx Aaevcxxxsmeh Format (cm): 36x52 Dampening: Stenz-Dampening-System