Used Heidelberg Ksba Cylinder for sale (335)

Condition: good (used), Year of construction: 2002, Buckle Folding Machine - Fi-52 flat pile feeder with TREMAT - 1st folding station, 52 cm, with 4 folding pockets, partially motorized adjustment - Glue system with ACC-2.4 control unit - 2nd folding station, 52 cm, with 4 folding pockets, partially motorized adjustment - Downstream knife shafts in both folding units Nwjdpfxex R Tlhj Aa Dob - Central control panel DCT-500 - SBP-46, No. 117702/98, year 1998, delivery stacker with press station and marking unit - Compressor

Condition: good (used), Year of construction: 2004, Saddle Stitcher Line Make: HEIDELBERG Type: Stitchmaster ST-400 Format: 320 x 480 mm Year of manufacture: 2004 Max. Speed: 14,000 cycles/h Machine no.: FJ.DFA0-000152 - Touch-screen control of all functions - Automated format pre-settings - 7 drum feeders (4x TAS/vertical + 3x TAL/horizontal) - Cover feeder UFA-400 - Sheet size monitoring - Stitching station HM-400 - HD/MM stitching heads (4x standard + 4x eyelet heads) Nwjdpfjx R Ti Tox Aa Dsb - 4 jumbo spool holders - Stitching wire transport equipment - Staple monitoring - Misfeed reject and delivery - 3-knife trimmer TR-400 - Cut monitoring - Center cut device MS - Punch cutting device with air blast system - Various punching dies (6, 8, and 12 mm) - Spare knife sets - Compensating stacker RIMA RS-10-S/2001 - 1 extra flat belt delivery - Compressed air supply for 7 feeders and UFA - Tools, accessories, technical documentation - 2 additional TAS-400 feeders in reserve, including frames, transport chains, and accessories Non-binding offer

Condition: good (used), Year of construction: 2013, Operating hours: only 14,500 - Format size – max. 750 x 1050 mm, min. 350 x 400 mm - Net die cutting area: 727 x 1050 mm - Materials: - Paper, min. 80 g/m² - Cardboard & solid board, up to 1400 g/m² - Corrugated board (B-flute) up to 4 mm - Die cutting pressure, max. 300 tons - Speed, max. 7,500 sheets/h - Pile height at feeder: 1000 mm (non-stop) Equipment & features: - Fully automatic die cutting, creasing, and embossing machine - Touch screen control panel - Stripping station for internal waste as well as side and rear edges - Centerline system - Small format device: minimum 300 x 350 mm - Non-stop automatic sheet feeder with pre-piling system - Non-stop standard delivery - Register system in feeder and die cutting station - Mechanical double sheet detector - Side lays on operating and drive side, switchable between pull and push lay - Four active front lays with sensors for sheet infeed control - Independent fine adjustment of front lays for drive and operator sides - Gripper margin adjustable, 10–18 mm - Delivery section with gripper margin removal - Stripe inserter in the delivery - Centralized and automatic chain lubrication - Two standard stripping frames - Two die cutting chases - Die cutting plate, 5 mm - Screw compressor Varimatrix 105-CS Nsdpox R Tiasfx Aa Djwb Note: All technical terms and specifications are provided as per industry standards for machinery listings in the printing and packaging sector.

Condition: good (used), Year of construction: 2004, only approx. 45 million impressions, Plus Version, CPC control with integrated register, Alcolor, Autoplate, Baldwin dampening circulation and cooling, blanket washing device, pull mark control, ultrasonic double sheet control, sheet decurler, Mediprint powder unit Nwodpsx R Tgrjfx Aa Djb

Condition: good (used), Year of construction: 2007, approx. 67 million impressions, EasyPlate, Alcolor, Technotrans dampening solution circulation and cooling, CPC control with integrated register, ink unit washing device, SuperBlue, pull mark control, ultrasonic double sheet control, sheet decurler, powder device Alphatronic 200, antistatic device Compact Nodpfex R S Tdjx Aa Dowb

Condition: good (used), Year of construction: 2007, material: up to 0.6 mm only approx. 95 million impressions CP 2000 Axis Control Autoplate all washing units powderspray Grafix Alphatronic 200 Nedox R Sxyepfx Aa Dswb High pile delivery IR dryer

Condition: like new (used), Year of construction: 2009, approx. 155 million impressions, Nedjx R Svfepfx Aa Djwb perfecting 2/2 or straight 4/0 InpressControl, WallScreen, Alcolor Vario, Autoplate, chamber doctor blade, PerfectJacket, impression cylinder washing system, blanket and ink unit washing system, ultrasonic double sheet control, extended delivery 2 modules (X2), dryer HD Version 2, water-cooled dryer cabinet, powder unit WEKO AP 262, antistatic device Compact, air supply AirStar Pro water-cooled

Condition: good (used), Year of construction: 1995, Approx. 208 million impressions, CPC control ClassicCenter, Alcolor dampening system, Autoplate automatic plate changer, Technotrans central air-cooled unit, ink unit wash device, blanket cylinder wash device, chromed plate cylinder, pull mark control, high pile delivery, sheet decurler, Alphatronic 200 powder sprayer, Eltex antistatic device. Nedpfjx R Sqijx Aa Dswb

Condition: good (used), Year of construction: 2006, only approx. 145 million impressions Perfecting 2/3 or straight printing 5/0 Prinect AxisControl, CP 2000, Alcolor Vario, Preset feeder, Ink unit temperature control, Ink unit washing device, Blanket and impression cylinder washing device, Technotrans CombiStar CAN (air-cooled), Extended delivery, 2 modules (X2), DryStar 2000 air-cooled, PowderStar AP 232 powder sprayer, Chamber doctor blade system (coating unit), Anilox roller, StaticStar Compact antistatic device, RSP inline finishing system, Nwsdpfxox R Snhs Aa Deb Air supply via AirStar, air-cooled

Condition: good (used), Year of construction: 2006, only approx. 110 million impressions, CP 2000, Axis Control, Alcolor Vario, Preset streamfeeder, air-cooled ink temperature control, program-controlled washing units, coating unit with chamber doctor blade system, powder device Weko AP 262, air supply AirStar Pro air-cooled, perfecting 1/4 or straight printing 5/0 Nodjx R Sl Tepfx Aa Dowb

Condition: like new (used), Year of construction: 2009, Approx. 240 million impressions, perfecting 1/4 or straight printing 5/0 PressCenter, WallScreen, Autoplate, Preset Plus feeder and Preset Plus delivery, CombiStar dampening solution circulation and cooling, Technotrans, ink roller cleaning system, tandem wash concept, blanket cylinder chromed, blanket washing device, PerfectJacket, CleanStar, powder sprayer WEKO AP 500 Duo, Compact antistatic device, AirStar Pro water-cooled air supply. Nsdpfox R Sltox Aa Dswb

Condition: like new (used), Year of construction: 2010, Speed: 15,000 sheets/hour Counter: approx. 170 million impressions (August 2025) Specifications: Press Center Alcolor dampening Technotrans refrigeration Combistar CAN Ink agitators for UV ink Autoplate Nodpfsx R Shnsx Aa Djwb Automatic roller washer Automatic blanket washer Automatic impression cylinder washer Ink temperature control Preset Plus feeder Preset Plus delivery Manual non-stop feeder and delivery Ultrasonic double sheet detector Extended delivery X(3) Press raised by 50 cm Foil kit Weko AP262 powder spray Coating units with 3x coating pump IR/UV drying system UV interdeck after units 1, 2, 5 & 6, with variable positions IR interdeck in unit Y1 Hot air interdeck in unit Y1 IR/hot air/UV with 3 UV lamps in the delivery

Condition: used, Year of construction: 2000, This Heidelberg SM 52-2 is a robust two-color straight printing press, designed for high-quality sheetfed offset production. Built in 2000, it features a 370 x 520 mm format and has accumulated approximately 78 million impressions, reflecting its reliability and extensive use. The machine is equipped with advanced technologies to streamline workflow and enhance print quality. It includes the Alcolor automatic film dampening system for consistent ink-water balance, and the Autoplate semi-automatic plate change system for efficient job changeovers. The Cptronic control system and chromed cylinders ensure precision and durability, while the integrated blanket and ink-roller wash-up devices simplify maintenance and reduce downtime. Additional features include a powder spray and cooling unit for optimal print conditions, as well as a numbering and perforating unit complete with two cams, wheels, and multiple numerators???ideal for security printing or serial numbering tasks. Located in Germany, this press is ready to deliver high-performance results for a variety of printing applications. Format: 370 x 520 mm Equipment: Nwjdpfx Aexizdtea Djb Two colours Straight machine Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Cptronic , Chromed cylinders Blankets wash-up device - Wash device for impression Ink-rollers wash device managed from console Powder spray, Cooling unit Numbering and perforating unit complete with 2 cams and wheels and many numerators

Condition: good (used), Year of construction: 2007, +Version Heidelberg Autoplate (Automatic Plate Changing System) Ink Roller Washing Device Baldwin Cooling Prinect Classic Center Control Station Powder Sprayer Nwedpfx Aow A Rgyja Deb Alcolor Dampening Impression Account: 115 Mio.

Condition: good (used), Year of construction: 2004, functionality: fully functional, Coating Unit Optional Printing Thickness: 0,5mm Extended Delivery (X1) CP 2000: Touch Screen Console Straight Machine Alcolor Dampening Grafix Alphatronic 200: Powder Sprayer Ink unit Temperature Control Technotrans (Aircooled) Automatic Impression Cylinder Washing Device Automatic Ink Roller Washing Device Nedpfxjwr T Rto Aa Dowb Automatic Blanket Washing Device Semi Automatic Plate Change High Pile Delivery IR Dryer Heidelberg Impression Account: 98 Mio.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: PJ000016, (processless) (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Typ: PJ.003.0000 Throughput: up to 11 plates/hour (depending on the plate type used) Format (cm): 52 & 74 with software license for both formats Plate formats (H x W): from 240 x 240 mm up to 670 x 750 mm Plate thickness: 0.15 mm - 0.30 mm Nwedpfjvw Afxox Aa Djb Resolution: 2540 dpi, max. 300 lpi, AM and FM screening Material counter: 26298.03 m2 Plate counter: 81600 pieces Exposure counter: 81322 pieces Total material used: 27988.8 m2 Total of all plates: 86417 pieces Total of all exposures: 86220 pieces Total of all punches: 86524 pieces Total of switch-on time: 85165.82 hours Total of exposure time: 3053.96 hours Equipment / Additional information: Plate stacker, advand PST 26 integrated single cassette loader, fully automatic plate loading/unloading unit with automatic intermediate paper removal, external compressed air supply required XXX – suction device for removing plate particles Workstation MetaDimension 4/8-up Prinect SignaStation 1.5 74 Very good condition // Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 2002, Speed: 14,000 sheets per hour Format (cm): max.: 48 x 32 The line consists of: - 4 x Inserter stations - 2 x Card inserter stations with adhesive unit (can also be used as standard inserter stations – top loading) - 1 x Cover feeder Nwsdsxmhrfopfx Aa Dob - 1 x Duplex sheet inspection unit - 1 x Stapling unit with (Hohner SB 50 heads) 2+2 - 1 x Three-knife trimmer with center cut - 1 x Cross stacker RIMA

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 013910086, CTP UNIT HB TOPSETTER (52 & 74 WITH SOFTWARE LICENSE FOR BOTH FORMATS) Counter: 115.778 plates Format (cm): 52 & 74 with software license for both formats Equipment / Additional information: Nwodpfxoimbp Ro Aa Dob With integrated plate punch With washing station AZURA C85 (M.No.: 92700-0307) Plate stacker, advand PST 48 ( M.No.: M211348121L) Software, complete RIP (6 years old) Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 1990, machine/vehicle number: 701 235, Counter: 54,356,348 Njdpfevcxxxjx Aa Dowb Format (cm): 36x52 Dampening: Stenz-Dampening-System

Year of construction: 1982, condition: excellent (used), machine/vehicle number: 676411N, WITH N&P UNIT (numbering & perforating) Nwsdpfx Aeivz E Tja Dsb Counter (m): 45 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit Bacher control 5000

Condition: excellent (used), Year of construction: 1963, machine/vehicle number: T 143 303 N, Format: A4 Nodpfx Aaexuhmre Dowb Number of Colors: 1

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: GTS 59 153 N, Format: A3 Nsdsxuhtxspfx Aa Dswb Number of Colors: 1

Condition: excellent (used), Year of construction: 1955, machine/vehicle number: 104 678 N, Format: A4 Nwsdpfxow Rb U Ne Aa Dsb Number of Colors: 1

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: PJ000400, Type: PJ.003.0000 Print plate size (mm): 240 x 240 up to 670 x 525 Nodspahr Aspfx Aa Djwb Plate thickness (mm): 0.15 to 0.30 Equipment / Additional information: G & J stacker Software, RIP, Computer The machine has 1 laser head with 64 diodes Dismantling, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg.

Condition: excellent (used), Year of construction: 1970, machine/vehicle number: T171 074 N, WITH HOT FOIL STAMPING DEVICE Format: A4 Nedpfew Rcrpox Aa Dewb Number of Colors: 1